EN590 10 PPM Diesel is a low-sulfur automotive diesel fuel designed to meet the requirements of the European diesel fuel specification EN 590, with sulfur content limited to a maximum of 10 mg/kg (10 ppm). It is suitable for modern diesel engines and is widely used for passenger vehicles, commercial vehicles, generators, agricultural machinery and industrial equipment.
Cetane Number : 51
Cetane Index : 46
Density at 15C : 820 - 845 kg/m
Flash Point : 55C
Water Content : 200 mg/kg
Ultra-low sulfur content of up to 10 ppm
Designed for modern diesel engines
Helps reduce sulfur-related emissions
Suitable for advanced emission-control systems
Good ignition characteristics with high cetane quality
Jet Fuel A1 is available through a direct mandate with a Kazakhstan refinery and title holder. The product is non-sanctioned and supplied in accordance with international aviation fuel specifications for commercial and private aviation use.
JET A-1 Aviation Turbine Fuel is a kerosene-type aviation fuel used primarily in commercial and military turbine-engine aircraft. It is formulated to provide reliable combustion, suitable low-temperature performance, thermal stability and controlled fuel quality for aviation applications.
JET A-1 is generally traded internationally according to recognized aviation-fuel specifications and requires strict quality control throughout production, storage, transportation and delivery.
Aromatics : Controlled according to applicable specification
Water Separation : Controlled according to aviation-fuel requirements
Thermal Stability : Compliant with applicable aviation specification
Electrical Conductivity : Controlled where required
Suitable for commercial turbine aircraft
Excellent low-temperature performance
High-quality controlled aviation fuel
Low freezing point suitable for high-altitude operation
Strictly controlled fuel cleanliness
We can assist in providing reliable seller for the following product below as described with specification to any world safe port !
Aviation Kerosene Colonial Grade JP54 is a kerosene-based aviation turbine fuel intended for gas-turbine-powered aircraft. In commercial commodity trading, although internationally recognized civil aviation fuel is typically marketed as Jet A-1 (ASTM D1655/DEF STAN 91-091), while the traditional CIS aviation fuel specification is TS-1 under GOST 10227.
Typical Technical Characteristics
Property Typical Value
Appearance Clear, bright, straw-colored liquid
Fuel Type Aviation Turbine Kerosene
Density @ 20C 0.775-0.840 kg/L
Flash Point Minimum 38C (Jet A-1) or 28C (TS-1, depending on specification)
Freeze Point Maximum -47C (Jet A-1) or -50C (TS-1)
Sulfur Content Maximum 0.20% by mass
Net Heat of Combustion Approximately 42.8 MJ/kg
Smoke Point Minimum 25 mm (typical export quality)
Gasoline is a refined petroleum fuel used primarily in spark-ignition internal combustion engines, such as those in most cars, motorcycles, lawn equipment, and small generators. It is produced by refining crude oil and blending hydrocarbons with additives to improve performance and reduce engine deposits.
Export fob and cif
LNG (Liquefied Natural Gas) is natural gas that has been cooled to approximately â??162�°C, reducing its volume substantially for efficient storage and transportation. It primarily consists of methane and is widely used for power generation, industrial heating, city gas distribution, marine fuel, and other energy applications. LNG is supplied in bulk under cryogenic conditions with specifications customized according to buyer requirements and destination-country regulations.
Sulfur : Very low
Water : Controlled to pipeline/LNG specification
Nitrogen : Contract/specification dependent
Heating value : Typically ~35 - 45 MJ/Nm
Density : Approx. 430 - 470 kg/m
High energy density compared with gaseous natural gas
Efficient for long-distance transportation
Lower sulfur and particulate emissions than many conventional fossil fuels
Suitable for large-scale industrial and power applications
LPG (Liquefied Petroleum Gas) is a clean-burning gaseous fuel stored and transported in liquefied form under pressure. It primarily consists of propane, butane or a mixture of both, depending on the grade and intended application.
Main Components : Propane / Butane
Physical State ; Liquefied gas under pressure
Appearance : Colorless
Odor : Odorized for leak detection where required
Propane Content : Grade dependent
High energy content
Clean-burning fuel compared with many conventional solid fuels
Easy to store and transport in liquefied form
Suitable for domestic and industrial applications
Rapid and controllable combustion
Crude Oil is an unrefined petroleum product extracted from underground reservoirs and used as the primary feedstock for producing fuels, lubricants, petrochemicals, plastics and other petroleum-based products. Crude oil is classified according to its API gravity, sulfur content, viscosity, density and overall quality.
Color : Brown to black
API Gravity : Approximately 20 - 45 API, depending on grade
Sulfur Content Low, medium or high sulfur depending on origin
Density : Typically 0.80 - 0.95 g/cm
Water & Sediment : As per contractual specification
Salt Content : As per refinery specification
Major feedstock for global petroleum refining
Available in light, medium and heavy grades
Can be selected according to refinery requirements
Suitable for fuel and petrochemical production
Supports large-volume industrial procurement
SLUDGE OIL ,,, Dip and Pay as FOB as Ship To Ship only, from Benghazi, Libya, Only for RWA Buyers.. Origin: Libyan .. Price: $390 / MT .. Quantity per Vessel is from 10,000 - 30,000 MT / Vessel, is up to Vessel draft ... Procedures is very simple: ICPO ---> Seller send Commercial Invoice to Buyer to sign ---> Buyer makes Block Fund in Dubai against Commercial Invoice ---> Dip test and Injection of product ---> Payment ... Please contacting through RWA buyers only... Contact: USAMA
MOQ: 500,000 Barrels per Month MAX: 5,000,000 Barrels per Month
Origins: Azerbaijan
Shipping Inspection - SGS or equivalent at the loading port
Next steps - If the above sounds good, let's discuss and we can get a more precise quote based on your exact requirements.
Origin - Azerbaijan
MOQ: 50,000 metric tons per month MAX: 500,000 metric tons per month
Inspection - SGS or equivalent at the loading port
Next steps - If the above sounds good, let's discuss and we can get a more precise quote based on your exact requirements.
Calcined petroleum coke (CPC) is an essential carbon material widely used in aluminium smelting,steel production and other high-temperature industrial processes. Its high carbon purity and conductivity make it a critical material in metallurgical manufacturing. Aurora Global Trading sources petroleum coke from trusted refineries and processing facilities,supplying industrial buyers with consistent quality material and dependable international logistics support. High carbon industrial fuel material Used in aluminium smelting and metallurgy Reliable refinery supply partners International shipping and logistics coordination.
Sulfur ; Common modern specification 10 ppm
Density at 15C : Approximately 720 - 775 kg/m, grade dependent
Appearance : Clear and bright; color may vary according to local requirements
Aromatics : Controlled according to applicable standard
Benzene : Controlled according to applicable standard
Olefins : Controlled according to applicable standard
Oxygenates : Specification dependent
Ethanol : Market/formulation dependent
Lead : Unleaded
Distillation characteristics : Controlled according to applicable specification
Additives Approved fuel additives may be used
1620 Petroleum By Products Suppliers
Short on time? Let Petroleum By Products sellers contact you.
