Product Description
Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. It's the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double.
For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality.
Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct.
Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process.
â??
Technical Specifications
Production (kg/h): 800 - 1000 kg
Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets)
Outer Wall Diameter in mm: 4760 mm
Inner Wall Diameter in mm: 1300 mm
Speed of Carriage in r/min: 1.6 - 2.2 r/min
Beater Rotating Speed in r/min: 740 r/min
Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm
Crab Slewing Speed in r/min: 0.59 - 2.96 r/min
Ground Rail External Diameter in mm: 5192 mm
Total Height in mm: 4155 mm
General Power in Kw: 4.17 Kw
Net weight in Kg: Around 1600 Kg
â??
TMI 70.1.1.200403 - DISK BALE PLUCKER New Spinning Machinery
Product Description
Disk plucker is an important equipment in blowing-carding joint machinery. It is suitable for each kind of raw cotton, cotton content chemical fiber, middle and long chemical fiber. Generally two set's of plucker are put into production in parallel. Plucking beater goes down the interval and rotates with carriage to pluck cotton in sequence. Cotton is plucked & transported to the next machine via duct. It Consists of a Flexible pipe, Carriage frame, Outer wall, Beater wall, Beater, Rail, Inner wall & Ring.
Technical Specifications
Production Output (kg/h): 800 - 1000 kg
Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets)
Outer Wall Diameter in mm: 4760 mm
Inner Wall Diameter in mm: 1300 mm
Speed of Carriage in r/min: 1.6 - 2.2 r/min
Beater Speed in r/min: 740 r/min
Blade extension from grid in mm: 2.5 - 7.5 mm
Rail Diameter in mm: 5132 mm
Total Height in mm: 3864 mm
Power in Kw: 4.1 Kw
Weight in Kg: Around 1600 Kg
TMI 60.1.1.200402 - DISK BALE PLUCKER Spinning Machinery
Product Description
Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. Itâ??s the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double.
For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality.
Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct.
Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process.
â??
Technical Specifications
Production (kg/h): 800 - 1000 kg
Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets)
Outer Wall Diameter in mm: 4760 mm
Inner Wall Diameter in mm: 1300 mm
Speed of Carriage in r/min: 1.6 - 2.2 r/min
Beater Rotating Speed in r/min: 740 r/min
Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm
Crab Slewing Speed in r/min: 0.59 - 2.96 r/min
Ground Rail External Diameter in mm: 5192 mm
Total Height in mm: 4155 mm
General Power in Kw: 4.17 Kw
Net weight in Kg: Around 1600 Kg
TMI 135.9.1.200504 - Direct Drive Lockstitch Industrial Sewing Machine
Product Details
1) Newly designed patterned appearance, extra width space convenient for the store of sewing
materials, easy for operation.
2) Self-lubricate design of take-up-lever mechanism to increase the service life.
3) Adopt inside direct drive servo-motor system to improve the braking precision when quick start.
Power saving up to 60% to reduce the cost.
4) Transmission mechanism adopt oil pump automatic oil feeding system to ensure the lubrication
when machine in high speed or low speed operation.
5) Adopt inside wounding system to increase the efficiency.
6) Auto safety switch devices to power off after the reverse running of the machine to ensure the
safety when fixing and cleaning. Full reflect the product humanisation design idea.
7) High-precision gear and main parts imported to comprehensively reduce the noise and improve
the quality and extend the service life.
8)Automatic trimming, automatic needle positioning, automatic needle counting, automatic reverse
sewing counting, automatic thread wiping, etc available to ensure the smart sewing. More humanisation,
more intellectualisation apply to all kinds of complex and highly difficult process, increase the efficiency.
Max Sewing Speed: 5000 rpm
Stitch Length: 7
CBM: 680x245x523
Weight: 36/42 Kg
380 Floppy Disk Drives Suppliers
Short on time? Let Floppy Disk Drives sellers contact you.
TMI 135.4.4.200502 - Direct Drive Computerized Double Synchronous Heavy Duty Lockstitch Sewing Machine
TMI 4.4.200502
Product Details
Heighten design in rear cover and cover axis design to avoid oil leakage and operating more safely.
Adopt the Innovative direct drive, energy-saving servo motor directly connect to the main shaft, start fast and stop accurately, reducing the responsive time.
750W energy-saving servo motor, more powerful trimmer. Round knives, high-performance trimmer structural to ensure accurate trimming effect, the cut is flat.
Have the functions of automatic trimmer, automatic needle positioning, automatic counting and automatic reverse sewing.
Max Sewing Speed: 6500rpm
Stitch Length: 8MM
CBM: 470x330x480mm
Power: 550W
TMI 135.6.2.200503 - Direct Drive Single Needle Flat Bed Lockstitch Industrial Sewing Machine
TMI 6.2.200503
Product Details
Newly designed patterned appearance, extra width space convenient for the store of sewing materials, easy for operation.
Self-lubricate design of take-up-lever mechanism to increase the service life.
Adopt inside direct drive servo-motor system to improve the braking precision when quick start. Power saving up to 60% to reduce the cost.
Transmission mechanism adopt oil pump automatic oil feeding system to ensure the lubrication when machine in high speed or low speed operation.
Adopt inside wounding system to increase the efficiency.
Auto safety switch devices to power off after the reverse running of the machine to ensure the safety when fixing and cleaning. Full reflect the product humanisation design idea.
High-precision gear and main parts imported to comprehensively reduce the noise and improve the quality and extend the service life.
Automatic trimming, automatic needle positioning, automatic needle counting, automatic reverse sewing counting, automatic thread wiping, etc available to ensure the smart sewing. More humanisation, more intellectualisation apply to all kinds of complex and highly difficult process, increase the efficiency.
Max Sewing Speed: 5000spm
Stitch Length: 5MM
CBM: 680x245x523
Power: 250W
TMI 135.20.4.200506 - Direct Drive High Speed Chain Stitch Industrial Sewing Machine
Product Details
Adopted link typed feeding mechanism, needle bar thread taking up, and lopper thread catching to produce 2 lines of chain stitch which is firm and elastic,suitable for lapping seam and decorative seam on garment, underwear, bedding articles and leather goods. These are five different gauges available for selection.
By changing fixed needle protection mechanism into moveable needle protection mechanism, it can prevent needle breaking and stitch skipping effectively in the motion of the thread hooking, and make stitching more
beautiful. The main running parts of the machine head are all made of the high quality steel, ensuring highspeed operation for a long time.
Max Sewing Speed: 4000 Spm
Max Sewing Thickness: 13 mm
Stitch Length: 0 - 5 mm
Weight: 29.5/36.6
Overall Dimensions: 600*230*550
Power: 550W
Laptops and desktop sets office stationary computer accessories office furniture hard disk, keyboards calendars, diaries & planners customized stationery printer machines and toners and more
Photo Description:
File Name: Vodafone Nokia.jpg
Date Taken: 2007-11-07 15:17:32+07:00
Date Uploaded: 2007-12-18 08:02:53
Last Modified: 2007-12-18 00:00:00
Disk Space Used: 173.36 KB
People:
Locations:
Events:
Original Size:
Available Sizes: 240x193, 372x300, 372x300
