Find Verified Ultra Low Sulphur Diesel Suppliers, Manufacturers and Wholesalers

EN590 10ppm is a high-quality automotive diesel fuel that meets the European standard EN 590 and contains a maximum sulfur content of 10 parts per million (ppm).

Key Specifications of EN590 10ppm Diesel
Sulfur Content: Maximum 10 ppm (0.001%)
Fuel Type: Ultra-Low Sulfur Diesel (ULSD)
Standard: EN 590
Application: Diesel-powered cars, trucks, generators, construction equipment, and marine engines (where permitted)
Environmental Benefit: Lower sulfur emissions, reduced particulate matter, and compatibility with modern emission-control systems.

Typical EN590 Parameters
Property Typical Value
Sulfur Max 10 ppm
Cetane Number Min 51
Density @ 15C 820-845 kg/m³
Flash Point Min 55C
Water Content Max 200 mg/kg
Lubricity (HFRR) Max 460m

Why Buyers Prefer EN590 10ppm
Cleaner combustion and lower emissions.
Suitable for modern Euro 5 and Euro 6 diesel engines.
Better engine performance and fuel efficiency.
Widely accepted for international diesel trading.
Often required by environmental regulations in Europe and many other regions.

In International Oil Trading, EN590 10ppm is one of the most commonly traded diesel grades. It is frequently offered through:

Spot contracts
Annual supply contracts
Tank-to-Tank (TTT)
Tank Takeover (TTO)
FOB (Free on Board)
CIF (Cost, Insurance & Freight).

We sell Oil and Gas Products
Wholesale Ultra -low sulphur diesel ( EN590) Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6

Ultralow sulfur diesel ULSD is a cleanerburning diesel fuel that contains a maximum of 15 parts per million ppm of sulfur ULSD contains 97 less sulfur than lowsulfur diesel LSD which typically contains 500 ppm of sulfur The European Union began mandating the reduction of diesel sulfur content in 1993 and the United States started phasing in ULSD requirements for highway vehicles in 2006 It was developed to allow for the use of improved pollution control devices that reduce diesel emissions ULSD can significantly reduce emissions when used in combination with cleanerburning diesel engines and vehicles It may react with strong acids or strong oxidizing agents such as chlorates nitrates and peroxides You should avoid contact with heat sparks fire and oxidizing agents The appearance of ULSD should be clear and bright free from visible sediment and water

Diesel Gas Oil Ultra-Low Sulphur Diesel (ULSD) is a refined diesel fuel with significantly reduced sulfur content, meeting stringent environmental standards. It ensures cleaner emissions, improved engine performance, and fuel efficiency, making it ideal for modern diesel engines in transportation and industrial applications.

Diesel EN590 10PPM / Ultra Low Sulphur Diesel (ULSD) available for international bulk supply. Quantity: 100,000 MT to 500,000 MT per transaction, subject to availability and contract terms.

Delivery / Transaction Structures: TTT, TTV, TTO, VTV and CIF.

Destination: Worldwide, subject to port acceptance, logistics feasibility, sanctions/compliance screening and seller confirmation.

Loading Port: TBA / nominated according to the confirmed supply and transaction structure.

Product Standard: EN 590 specification, with sulphur content up to 10 mg/kg (10 ppm), subject to the applicable product specification and independent inspection.

Inspection: Independent inspection such as SGS or equivalent, as mutually agreed by the parties.

Commercial terms: Price, origin, loading location, delivery schedule, payment terms and transaction procedure are confirmed based on the buyer's specific requirements and the available cargo.

Serious buyers are invited to submit their required quantity, destination, preferred delivery structure and purchase requirements for commercial consideration.

EN590 10 PPM Diesel is a low-sulfur automotive diesel fuel designed to meet the requirements of the European diesel fuel specification EN 590, with sulfur content limited to a maximum of 10 mg/kg (10 ppm). It is suitable for modern diesel engines and is widely used for passenger vehicles, commercial vehicles, generators, agricultural machinery and industrial equipment.

Cetane Number : 51
Cetane Index : 46
Density at 15C : 820 - 845 kg/m
Flash Point : 55C
Water Content : 200 mg/kg

Ultra-low sulfur content of up to 10 ppm
Designed for modern diesel engines
Helps reduce sulfur-related emissions
Suitable for advanced emission-control systems
Good ignition characteristics with high cetane quality

EN 590 10 PPM
JET FUEL AI
D 6

Product Grade

ULSD 10 PPM

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Ultra Low Sulfur Diesel (ULSD) is a refined diesel fuel characterized by its very low sulfur content. It is suitable for modern diesel engines, commercial transportation, industrial equipment, generators, and other compatible applications. The product is available for bulk international B2B supply, subject to agreed specifications, quantity, inspection, availability, and delivery terms.

Minimum Order Qty

1,000

Units

Metric Ton (MT)

Packaging Details

Bulk

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (use this only if Oman is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

ULSD-10PPM

Product Standards

Applicable ULSD specification / EN 590 where applicable

Brand

Unbranded

Model No.

N/A

HS Code

2710.19

Key Specifications 1

Sulfur Content: Maximum 10 ppm

Key Specifications 2

Cetane Number: Minimum 51; Density at 15�°C: 820â??845 kg/m�³

Key Specifications 3

Flash Point: Minimum 55�°C; Water Content: Maximum 200 mg/kg

Key Specifications 4

Suitable for commercial vehicles, heavy-duty transportation, industrial generators, power equipment, and other compatible diesel applications.

Key Advantage 1

Very low sulfur content suitable for applications requiring ultra-low sulfur diesel.

Key Advantage 2

Suitable for modern diesel engines and international B2B fuel requirements.

Key Advantage 3

Product quality can be verified against agreed specifications through inspection and laboratory testing where required.

Key Advantage 4

Available for bulk international supply with flexible quantity, delivery, inspection, and shipping arrangements.

ULSD is a cleaner-burning diesel fuel that contains 97% less sulfur than low-sulfur diesel (LSD). ULSD was developed to allow the use of improved pollution control devices that reduce diesel emissions more effectively but can be damaged by sulfur

Origins: Russia

Ultra Low Sulfur Diesel (ULSD) is a refined petroleum fuel designed for diesel engines and equipment requiring low-sulphur fuel. In markets such as the United States, ULSD generally contains no more than 15 parts per million (ppm) sulphur. Low-sulphur diesel helps enable the use of advanced exhaust after-treatment systems and supports compliance with applicable emissions regulations. It is widely used in commercial transportation, logistics fleets, industrial machinery, generators, and selected marine or off-road applications where permitted. Specifications vary by country and fuel standard, so sulphur limits, cetane rating, density, flash point, and other properties should be confirmed before purchase.

Product Grade: EN590 10 PPM


Product Detailed Description

Diesel EN590 10 PPM is a low-sulfur automotive diesel fuel formulated according to EN590 requirements. With a maximum sulfur content of 10 ppm, it is suitable for modern diesel engines, commercial transportation, industrial generators, and other compatible diesel applications. Available for bulk B2B supply subject to product availability, agreed specifications, quantity, inspection, and delivery terms,

Production Capacity

As per confirmed order and product availability

Country Where Product is Manufactured

Oman (only if this is the actual country of origin)

Key Specifications 1

Sulfur Content: Maximum 10 ppm

Key Specifications 2

Cetane Number: Minimum 51; Density at 15C: 820-845 kg/m3

Key Specifications 3

Flash Point: Minimum 55C; Water Content: Maximum 200 mg/kg

Key Specifications 4

Suitable for commercial transportation, heavy-duty vehicles, industrial generators, and compatible diesel-powered equipment.

Key Advantage 1

Ultra-low sulfur content suitable for applications requiring low-sulfur diesel fuel.

Key Advantage 2

EN590 specification suitable for international B2B diesel fuel requirements.

Key Advantage 3

Quality can be verified through agreed product specifications and independent inspection when required.

Key Advantage 4

Bulk supply with flexible delivery, quantity, inspection, and international shipping arrangements.

(EN590) 10 PPM/50PPM
Origin: Kazakhstan
The detailed specification: Meets all International Standards
Total Spot quantity order: 100,000MT
The price and discount:
- FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT
FROM NWE PLATTS
- CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS
Shipment:
- TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per
conditions in Seller`s FCO
Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via
MT103
Payment Procedure: According to the terms of the contract, to be mutually agreed upon
by Buyer & Seller.
Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST

EN590 10PPM is ultra-low-sulphur diesel fuel that meets the European automotive diesel fuel standard EN 590, provided the product complies with the applicable specification. It is used in diesel-powered vehicles, commercial transport, heavy-duty engines and compatible diesel equipment. The term 10PPM means the sulphur content is no more than 10 milligrams per kilogram (10 mg/kg).
1. General product information
Specification Description
Product name EN590 10PPM Ultra-Low-Sulphur Diesel (ULSD)
Product type Middle-distillate petroleum fuel
Standard EN 590, subject to applicable version and grade
Maximum sulphur 10 mg/kg (10 ppm)
Appearance Clear and bright, normally pale yellow
Physical state Liquid at normal ambient conditions
Main use Diesel engines and compatible equipment
Typical density at 15�°C 820â??845 kg/m�³
Cetane number Minimum 51
Kinematic viscosity at 40�°C 2.0â??4.5 mm�²/s
Flash point Above 55�°C
Maximum water content 200 mg/kg
Maximum total contamination 24 mg/kg

ULTRA -LOW SULPHUR DIESEL EN 590 10 PPM
A1 JET FUEL
D6

NSRIC Green Supplies Inc. (NGS) is your trusted, licensed intermediary for secure and efficient global trade of Ultra Low Sulfur Diesel (ULSD). As environmental regulations tighten worldwide, the demand for this cleaner, high-performance fuel is critical. NGS specializes in bridging the gap between verified end sellers and serious end buyers, ensuring a transparent, compliant, and profitable transaction every time.

Our expertise is rooted in managing the complex logistics and documentation required for international petroleum trading. We handle the intricacies of supply chain security, quality assurance, and legal compliance, allowing our B2B clients and traders to focus on their core business.

By partnering with NGS for your ULSD needs, you gain access to a global network of trusted suppliers, guaranteeing a consistent and reliable supply of high-specification fuel that meets the strictest international standards. Secure your long-term ULSD supply chain through our professional intermediary services and mitigate the risks associated with global commodity trading. Contact NGS today to discuss your specific tonnage requirements.

Product Grade

Automotive Diesel / EN 590

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Automotive Diesel is a refined fuel designed for use in diesel-powered vehicles and transportation equipment. It is suitable for commercial vehicles, passenger vehicles, heavy-duty trucks, buses, and compatible diesel engines. The product can be supplied in bulk for international B2B requirements, subject to agreed specifications, quantity, availability, inspection, and delivery terms.

Minimum Order Qty

1,000

Units

Metric Ton (MT)

Packaging Details

Bulk

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

AUTO-DIESEL

Product Standards

EN 590 / Applicable Automotive Diesel Specification

Brand

Unbranded

Model No.

N/A

HS Code

2710.19

Key Specifications 1

Sulfur Content: As per applicable diesel fuel specification

Key Specifications 2

Cetane Number: As per agreed product specification

Key Specifications 3

Density, flash point, distillation characteristics, lubricity, and water content according to the applicable product specification.

Key Specifications 4

Suitable for passenger vehicles, commercial trucks, buses, heavy-duty vehicles, generators, and other compatible diesel engines.

Key Advantage 1

Suitable for a wide range of diesel-powered automotive and commercial applications.

Key Advantage 2

Designed to provide reliable fuel performance for transportation and heavy-duty operations.

Key Advantage 3

Product quality can be verified against agreed specifications through inspection and laboratory testing where required.

Key Advantage 4

Available for bulk B2B supply with flexible quantity, delivery, inspection, and international shipping arrangements.

Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature).

Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine.

The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades:

L - summer, used at ambient temperatures above 0 C;
3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation <-35 C and n <-25 C), or winter, used at temperatures up to -30 C, then the fuel must have a stasis <-45 C and n <-35 C);

- Arctic diesel fuel, the temperature of which is up to -50 C. The sulfur content in diesel fuel of grades L and Z does not exceed 0.2% for type I fuel and 0.5 for type II fuel, and grade A 0.4%

Diesel EN590 is a premium ultra-low sulfur automotive diesel fuel manufactured in accordance with European EN590 specifications. It is designed to provide efficient combustion, lower emissions, improved engine performance, and compatibility with modern diesel engines. Sulfur content is maintained at a maximum of 10 ppm to meet international environmental standards. Suitable for automotive, industrial, transportation, and commercial applications. Available for bulk export shipments with flexible packaging and logistics arrangements.

NSRIC Green Supplies Inc. (NGS) is your trusted licensed intermediary for securing Low-Sulfur Diesel Oil (LSDO) in the global energy market. As a critical and environmentally preferred fuel, LSDO is essential for shipping, industrial operations, and transportation, offering a cleaner, more efficient energy solution compliant with stringent international emission standards.

We specialize in connecting vetted, serious end buyers with reliable international sellers, ensuring a streamlined and secure transaction process from inquiry to final delivery. Our expertise covers the full spectrum of global trade operations, including comprehensive due diligence, secure payment management, and logistics coordination.

NGS facilitates both spot purchases and long-term supply contracts for LSDO, providing stability and competitive pricing for your enterprise. Partner with us to navigate the complexities of global oil and gas commodity trading with confidence. Focus on your business growth while we guarantee the integrity and profitability of your LSDO supply chain. Contact us today to discuss your specific volume and delivery requirements.

Product Grade Commercial LPG

Product Detailed Description

Liquefied Petroleum Gas (LPG) is a versatile gaseous fuel primarily composed of propane, butane, or a mixture of both. It is widely used for industrial heating, commercial applications, cooking, power generation, and other compatible energy requirements. LPG can be supplied in bulk for international B2B requirements, subject to agreed product specifications, availability, inspection, quantity, and delivery terms.

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)


Product Standards

Applicable LPG Specification / ASTM / ISO Standards


Key Specifications 1

Composition: Propane / Butane mixture according to the agreed product specification.

Key Specifications 2

Product purity, vapor pressure, density, sulfur content, and other properties according to the applicable LPG specification.

Key Specifications 3

Suitable for industrial heating, commercial energy applications, cooking, power generation, and compatible LPG equipment.

Key Specifications 4

Available for bulk international supply with delivery arrangements based on quantity, destination, inspection, and applicable shipping requirements.

Key Advantage 1

Versatile fuel suitable for commercial, industrial, and energy applications.

Key Advantage 2

Convenient bulk supply option for large-scale energy requirements.

Key Advantage 3

Product quality can be verified through agreed specifications, laboratory testing, and independent inspection where required.

Key Advantage 4

Flexible bulk delivery and international shipping arrangements can be coordinated according to buyer requirements.

Product Grade Base Oil - Group I / Group II

Product Detailed Description

Base Oil is a refined petroleum product used as a primary raw material in the production of lubricants, automotive oils, industrial oils, hydraulic fluids, gear oils, and other specialized lubricant formulations. Available grades can be supplied according to viscosity, performance requirements, and applicable industry specifications. Bulk international B2B supply is subject to product availability, agreed specifications, inspection, quantity, and delivery terms.

Packaging Details

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)

Product Standards

API / ASTM / Applicable Base Oil Specification

Key Specifications 1

Base Oil Group: Group I / Group II, subject to availability and buyer requirements.

Key Specifications 2

Viscosity, viscosity index, sulfur content, flash point, pour point, and other properties according to the specified grade.

Key Specifications 3

Used in automotive lubricants, industrial lubricants, hydraulic oils, gear oils, engine oils, and specialty lubricant formulations.

Key Specifications 4

Available in bulk or drum packaging for international B2B supply, with specifications and delivery arrangements tailored to buyer requirements.

Key Advantage 1

Versatile raw material for manufacturing a wide range of automotive and industrial lubricants.

Key Advantage 2

Available in different grades and viscosity ranges to meet specific formulation requirements.

Key Advantage 3

Product quality can be verified through agreed specifications, laboratory testing, and independent inspection where required.

Key Advantage 4

Flexible bulk and packaged supply options with international delivery arrangements based on buyer requirements.

JET A-1 AVIATION TURBINE FUEL
Jet A-1 aviation turbine fuel available for international bulk supply.
Product: Jet A-1
Grade: Aviation Turbine Fuel
Standards: ASTM D1655 / DEF STAN 91-091, subject to supply specification
Supply: Spot and Contract
Quantity: Subject to buyer requirement
Delivery: FOB / CIF / CFR subject to destination and availability
Inspection: Independent inspection can be arranged subject to transaction terms.
Packaging: Bulk
Suitable for commercial aviation and approved turbine-engine applications.
We welcome inquiries from qualified aviation fuel importers, airlines, airport fuel suppliers, aviation fuel distributors and authorized traders.
Buyers should provide required quantity, destination airport/port and preferred delivery terms for a commercial quotation.

Product Grade :
Marine Fuel / Marine Gas Oil (MGO)

Product Detailed Description

Marine Fuel is a petroleum-based fuel used for marine engines, vessels, generators, and onboard power systems. It is suitable for commercial shipping, cargo vessels, offshore operations, and other marine applications, subject to the required fuel grade and applicable maritime fuel regulations. Available for international B2B supply in bulk quantities, subject to product availability, agreed specifications, inspection, and delivery requirements.

As per confirmed order and product availability

Oman (only if this is the actual country of origin)

Product Standards

ISO 8217 / Applicable Marine Fuel Specification



Key Specifications 1

Fuel Grade: Marine Fuel / Marine Gas Oil (MGO)

Key Specifications 2

Sulfur Content, viscosity, density, flash point, water content, and other parameters according to the agreed marine fuel specification.

Key Specifications 3

Designed for use in marine diesel engines, auxiliary engines, generators, and onboard power systems.

Key Specifications 4

Suitable for cargo vessels, commercial ships, offshore vessels, marine transportation, and other compatible marine applications.

Key Advantage 1

Suitable for a wide range of commercial marine and shipping applications.

Key Advantage 2

Available according to the required marine fuel specification and vessel requirements.

Key Advantage 3

Fuel quality can be verified through agreed specifications, laboratory testing, and independent inspection where required.

Key Advantage 4

Bulk supply and delivery arrangements can be coordinated according to vessel requirements, quantity, port, inspection, and shipping terms.

Product Grade

Industrial Grade Methanol

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Methanol is a clear, colorless, and highly versatile industrial chemical used as a raw material and solvent across multiple industries. It is widely used in the production of formaldehyde, acetic acid, fuels, solvents, and various chemical intermediates. The product can be supplied for international B2B requirements in bulk quantities, subject to agreed specifications, availability, inspection, and delivery terms.

Minimum Order Qty

500

Units

Metric Ton (MT)

Packaging Details

Bulk / ISO Tank / Steel Drums

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

METHANOL-IND

Product Standards

Industrial Grade / Applicable Methanol Specification

Brand

Unbranded

Model No.

N/A

HS Code

2905.11

Key Specifications 1

Appearance: Clear, colorless liquid with high chemical purity according to the agreed product specification.

Key Specifications 2

Methanol Purity: Typically 99.85% minimum for industrial-grade material, subject to the specific supply specification.

Key Specifications 3

Used in formaldehyde production, solvents, chemical manufacturing, fuel applications, and various industrial processes.

Key Specifications 4

Available in bulk, ISO tanks, or suitable industrial packaging depending on order quantity and delivery requirements.

Key Advantage 1

Versatile industrial chemical with applications across multiple manufacturing sectors.

Key Advantage 2

High-purity methanol suitable for a wide range of industrial and chemical processes.

Key Advantage 3

Product quality can be verified through agreed specifications, laboratory testing, and independent inspection where required.

Key Advantage 4

Flexible bulk supply and international delivery arrangements can be coordinated according to buyer requirements.

Product Grade

Natural Gas - CNG

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Compressed Natural Gas (CNG) is natural gas compressed to a high pressure for storage and transportation. It is primarily composed of methane and is used as a fuel for vehicles, industrial applications, power generation, and other compatible natural gas systems. CNG can be supplied for international B2B requirements subject to applicable specifications, availability, transportation infrastructure, and delivery conditions.

Minimum Order Qty

500

Units

Metric Ton (MT)

Packaging Details

CNG Cylinders / Tube Trailers

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

CNG-NATURAL-GAS

Product Standards

Applicable Natural Gas / CNG Specification

Brand

Unbranded

Model No.

N/A

HS Code

2711.21

Key Specifications 1

Primary Component: Methane; composition according to the agreed natural gas specification.

Key Specifications 2

Methane content, heating value, moisture, sulfur compounds, and other parameters according to the applicable specification.

Key Specifications 3

Suitable for CNG-powered vehicles, industrial heating, power generation, and compatible natural gas applications.

Key Specifications 4

Supplied in compressed form using approved high-pressure cylinders or tube trailers, subject to applicable transportation and safety requirements.

Key Advantage 1

A versatile natural gas fuel suitable for transportation and industrial applications.

Key Advantage 2

Can be used in compatible CNG vehicles and natural gas-powered equipment.

Key Advantage 3

Product quality can be verified through agreed specifications and appropriate testing procedures.

Key Advantage 4

Supply and transportation arrangements can be coordinated according to buyer requirements, quantity, destination, and applicable regulations.

Product Grade

Fertilizer Grade Urea

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Fertilizer Grade Urea is a high-nitrogen fertilizer widely used in agriculture to support plant growth and improve nitrogen availability in soil. It is suitable for a wide range of crops and agricultural applications. The product can be supplied in bulk or standard fertilizer bags for international B2B requirements, subject to agreed specifications, availability, inspection, quantity, and delivery terms.

Product Grade

Penetration Grade Bitumen

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Bitumen is a petroleum-derived binding material widely used in road construction, asphalt production, waterproofing, roofing, and various industrial applications. It is available in different grades according to penetration, softening point, viscosity, and application requirements. Bulk international supply can be arranged according to buyer specifications, quantity, destination, inspection, and delivery terms.

Minimum Order Qty

500

Units

Metric Ton (MT)

Packaging Details

New steel drums / Jumbo bags / Bulk

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

BITUMEN-PG

Product Standards

ASTM / EN / Applicable Bitumen Specification

Brand

Unbranded

Model No.

N/A

HS Code

2715.00

Key Specifications 1

Grade: Penetration Grade Bitumen; available grades subject to buyer requirements.

Key Specifications 2

Penetration, softening point, flash point, ductility, viscosity, and other parameters according to the specified grade.

Key Specifications 3

Suitable for asphalt production, road construction, waterproofing, roofing, and industrial applications.

Key Specifications 4

Available in drum, jumbo bag, or bulk form depending on order quantity and delivery requirements.

Key Advantage 1

Provides strong binding and waterproofing properties for infrastructure and construction applications.

Key Advantage 2

Available in different grades to meet specific road construction and industrial requirements.

Key Advantage 3

Product quality can be verified through agreed technical specifications, laboratory testing, and independent inspection where required.

Key Advantage 4

Flexible packaging and bulk delivery options can be arranged according to buyer requirements.

Product Grade

Fuel Oil / Heavy Fuel Oil (HFO)

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Fuel Oil is a petroleum-derived fuel used in industrial heating, power generation, marine applications, boilers, and other heavy-duty energy systems. The product can be supplied in bulk quantities according to the required grade and agreed technical specifications. International B2B supply is subject to product availability, quality requirements, inspection, quantity, and delivery terms.

Minimum Order Qty

1,000

Units

Metric Ton (MT)

Packaging Details

Bulk

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

FUEL-OIL

Product Standards

Applicable Fuel Oil Specification / ISO 8217 where applicable

Brand

Unbranded

Model No.

N/A

HS Code

2710.19

Key Specifications 1

Fuel Grade: Fuel Oil / Heavy Fuel Oil (HFO)

Key Specifications 2

Viscosity, density, sulfur content, flash point, water content, and other parameters according to the agreed product specification.

Key Specifications 3

Suitable for industrial boilers, furnaces, power generation systems, marine applications, and heavy-duty fuel requirements.

Key Specifications 4

Available for bulk international supply with delivery arrangements based on buyer requirements, quantity, destination, inspection, and applicable shipping terms.

Key Advantage 1

Suitable for large-scale industrial and energy applications.

Key Advantage 2

Provides a practical fuel solution for heavy-duty heating and power-generation requirements.

Key Advantage 3

Product quality can be verified through agreed specifications, laboratory testing, and independent inspection where required.

Key Advantage 4

Bulk supply and international delivery arrangements can be coordinated according to buyer requirements.

Product Grade

Jet A-1

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Jet A-1 is a kerosene-type aviation turbine fuel used primarily in commercial and general aviation turbine-engine aircraft. It is formulated to meet internationally recognized aviation fuel specifications and is suitable for aviation applications subject to applicable quality, certification, inspection, and delivery requirements. Available for international B2B supply in bulk quantities, subject to product availability and agreed commercial terms.

Minimum Order Qty

1,000

Units

Metric Ton (MT)

Packaging Details

Bulk

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

JET-A1

Product Standards

ASTM D1655 / DEF STAN 91-091

Brand

Unbranded

Model No.

N/A

HS Code

2710.19

Key Specifications 1

Fuel Type: Kerosene-type aviation turbine fuel; Grade: Jet A-1

Key Specifications 2

Flash Point: Minimum 38�°C; Freezing Point: Maximum â??47�°C

Key Specifications 3

Fuel quality, thermal stability, distillation characteristics, sulfur content, and other parameters according to the applicable aviation fuel specification.

Key Specifications 4

Primarily used for commercial aviation, cargo aircraft, business aviation, and other compatible turbine-engine aircraft.

Key Advantage 1

Internationally recognized aviation turbine fuel grade suitable for turbine-engine aircraft.

Key Advantage 2

Low freezing-point characteristics make it suitable for aviation operations across a wide range of operating conditions.

Key Advantage 3

Quality can be verified through certified testing and independent inspection according to the applicable aviation fuel specification.

Key Advantage 4

Available for bulk international B2B supply with delivery, inspection, documentation, and shipping arrangements based on buyer requirements.

Product Grade

Automotive Gasoline

Minimum Price (USD)

Contact Supplier

Maximum Price (USD)

Contact Supplier

Price Units

USD / Metric Ton

Incoterms

FOB / CIF

Product Detailed Description

Gasoline is a refined petroleum fuel primarily used in spark-ignition engines for passenger vehicles, commercial vehicles, and other compatible automotive applications. The product can be supplied for international B2B requirements in bulk quantities, subject to agreed quality specifications, availability, inspection, quantity, and delivery terms.

Minimum Order Qty

1,000

Units

Metric Ton (MT)

Packaging Details

Bulk

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)

Sample Available

No

Sample Cost Born By

Buyer

Seller Product Code

GASOLINE-AUTO

Product Standards

Applicable Automotive Gasoline Specification

Brand

Unbranded

Model No.

N/A

HS Code

2710.12

Key Specifications 1

Octane Rating: As per agreed product specification

Key Specifications 2

Sulfur Content, density, vapor pressure, and distillation characteristics according to the applicable gasoline specification.

Key Specifications 3

Suitable for spark-ignition engines and formulated according to the required automotive fuel specification.

Key Specifications 4

Suitable for passenger vehicles, commercial vehicles, and other compatible gasoline-powered equipment.

Key Advantage 1

Suitable for a wide range of automotive and transportation applications.

Key Advantage 2

Reliable refined fuel suitable for modern spark-ignition engines when matched to the required specification.

Key Advantage 3

Product quality can be verified through agreed specifications, inspection, and laboratory testing where required.

Key Advantage 4

Available for bulk B2B supply with flexible quantity, delivery, inspection, and international shipping arrangements.

GRANULAR SULFUR

Granular Sulfur available for international bulk supply.

Product: Granular Sulfur
Grade: Granular
Purity: Subject to product specification
Supply: Spot and Contract
Quantity: Subject to buyer requirement
Delivery: FOB / CIF / CFR subject to destination and availability
Packaging: Bulk / Bags
Inspection: Independent quality inspection can be arranged subject to terms.

Suitable for fertilizer production, sulfuric acid manufacturing and approved
industrial applications.

We welcome inquiries from fertilizer manufacturers, chemical companies,
industrial users, importers, distributors and qualified commodity traders.

Buyers should provide required quantity, destination port and preferred
delivery terms for a commercial quotation.

Urea Fertilizer 46% Nitrogen - Prilled

Prilled Urea fertilizer with 46% nitrogen available for international bulk
supply.

Product: Prilled Urea
Grade: 46-0-0
Nitrogen Content: 46% minimum
Supply: Spot and Contract
Quantity: Subject to buyer requirement
Delivery: FOB / CIF / CFR subject to destination and availability
Packaging: Bulk / Bags
Inspection: Independent quality inspection can be arranged subject to terms.

Suitable for agricultural applications, crop nutrition and soil fertilization.

We welcome inquiries from fertilizer importers, distributors, agricultural
companies, wholesalers and qualified commodity traders.

Buyers should provide required quantity, destination port and preferred
delivery terms for a commercial quotation.

Urea Fertilizer 46% Nitrogen -granular

Granular Urea fertilizer with 46% nitrogen available for international bulk
supply.

Product: Granular Urea
Grade: 46-0-0
Nitrogen Content: 46% minimum
Supply: Spot and Contract
Quantity: Subject to buyer requirement
Delivery: FOB / CIF / CFR subject to destination and availability
Packaging: Bulk / Bags
Inspection: Independent quality inspection can be arranged subject to terms.

Suitable for agricultural applications, crop nutrition and soil fertilization.

We welcome inquiries from fertilizer importers, distributors, agricultural
companies, wholesalers and qualified commodity traders.

Buyers should provide required quantity, destination port and preferred
delivery terms for a commercial quotation.

DI-AMMONIUM PHOSPHATE (DAP) 18-46-0

Di-Ammonium Phosphate (DAP) fertilizer available for international bulk
supply.

Product: Di-Ammonium Phosphate (DAP)
Grade: 18-46-0
Supply: Spot and Contract
Quantity: Subject to buyer requirement
Delivery: FOB / CIF / CFR subject to destination and availability
Packaging: Bulk / Bags
Inspection: Independent quality inspection can be arranged subject to terms.

DAP is a concentrated phosphate fertilizer used for agricultural crops and
soil nutrient management.

We welcome inquiries from fertilizer importers, distributors, agricultural
companies, wholesalers and qualified commodity traders.

Buyers should provide required quantity, destination port and preferred
delivery terms for a commercial quotation.

HEAVY FUEL OIL (HFO)

Heavy Fuel Oil (HFO) available for international bulk supply.

Product: Heavy Fuel Oil
Grade: HFO
Supply: Spot and Contract
Quantity: Subject to buyer requirement
Delivery: FOB / CIF / CFR subject to destination and availability
Packaging: Bulk
Inspection: Independent inspection can be arranged subject to transaction terms.

Suitable for industrial boilers, power generation, marine and other approved
heavy-fuel applications, subject to product specification and regulations.

We welcome inquiries from qualified fuel importers, power companies,
industrial users, marine fuel suppliers and commodity traders.

Buyers should provide required quantity, destination port and preferred
delivery terms for a commercial quotation.

BITUMEN 60/70- PENETRATION GRADE

Bitumen 60/70 available for international bulk supply.

Product: Bitumen 60/70
Grade: Penetration Grade 60/70
Supply: Spot and Contract
Quantity: Subject to buyer requirement
Delivery: FOB / CIF / CFR subject to destination and availability
Packaging: Bulk / Drums
Inspection: Independent inspection can be arranged subject to transaction terms.

Suitable for road construction, asphalt production, paving and infrastructure
applications.

We welcome inquiries from qualified importers, road contractors, asphalt
manufacturers, construction companies and commodity traders.

Buyers should provide required quantity, destination port and preferred
delivery terms for a commercial quotation.

LIQUEFIED PETROLEUM GAS (LPG) GOST 20448-90
Liquefied Petroleum Gas (LPG) available for international bulk supply.
Product: Liquefied Petroleum Gas (LPG)
Standard: GOST 20448-90
Supply: Spot and Contract
Quantity: Subject to buyer requirement
Delivery: FOB / CIF / CFR subject to destination and availability
Packaging: Bulk / LPG Carrier
Inspection: Independent inspection can be arranged subject to transaction terms.
Suitable for approved industrial, commercial, heating and energy applications, subject to local regulations and product specifications.
We welcome inquiries from qualified LPG importers, distributors, energy companies, industrial users and authorized commodity traders.
Buyers should provide required quantity, destination terminal/port and preferred delivery terms for a commercial quotation.

LIQUEFIED NATURAL GAS (LNG)
Liquefied Natural Gas (LNG) available for international bulk supply.
Product: Liquefied Natural Gas
Grade: LNG
Supply: Spot and Contract
Quantity: Subject to buyer requirement
Delivery: FOB / CIF / CFR subject to destination and availability
Packaging: Bulk / LNG Carrier
Inspection: Independent inspection can be arranged subject to transaction terms.
LNG is natural gas cooled to a cryogenic temperature for transportation and storage in liquid form. Suitable for approved energy, industrial and power-generation applications.
We welcome inquiries from qualified LNG importers, utilities, power companies, energy companies and authorized commodity traders.
Buyers should provide required quantity, destination terminal, delivery schedule and preferred commercial terms.

REBCO CRUDE OIL - GOST 9965-76
REBCO crude oil available for international bulk supply.
Product: REBCO Crude Oil
Standard: GOST 9965-76
Supply: Spot and Contract
Quantity: Subject to buyer requirement
Delivery: FOB / CIF / CFR subject to destination and availability
Packaging: Bulk
Inspection: Independent inspection can be arranged subject to transaction terms.
Suitable as refinery feedstock for petroleum processing.
We welcome inquiries from qualified refineries, crude oil importers, energy companies and authorized commodity traders.
Buyers should provide required quantity, destination, preferred delivery terms and specifications for a commercial quotation.

LIGHT CYCLE OIL (LCO)
Light Cycle Oil available for international bulk supply.
Product: Light Cycle Oil (LCO)
Supply: Spot and Contract
Quantity: Subject to buyer requirements
Delivery: FOB / CIF / CFR subject to destination and availability
Packaging: Bulk
Inspection: Independent inspection can be arranged subject to transaction terms.
LCO is a refinery intermediate stream that can be used as a feedstock for further processing or blending, subject to its specific quality parameters and applicable regulations.
We welcome inquiries from qualified refineries, petroleum processors, fuel blenders, traders and industrial buyers.

a. Name of Product: EN 590 Diesel Fuel
b. Product Grade: EN 590 (Automotive Diesel Fuel-Ultra Low Sulfur Diesel)
c. Minimum Price (USD): USD 550 per MT (indicative, subject to market fluctuation)
d. Maximum Price (USD): USD 850 per MT (indicative, subject to market fluctuation)
e. Price Units: USD per Metric Ton (MT) / USD per Liter (as agreed)
f. Incoterms: FOB, CIF, CFR, DAP, DDP (as per buyer's seller agreement)
g. Product Origin: Europe / Russia / Kazakhstan / Middle East (Non-sanctioned origin as applicable)
h. Key Specifications / Special Features:
Sulfur Content: 10 ppm
Cetane Number: Min 51
Density @15C: 820-845 kg/m3
Flash Point: Min 55C
Complies fully with EN 590 European Standards
Suitable for modern diesel engines
Low emissions & high fuel efficiency
i. Harmonized System (HS) Code: 2710.19
j. Minimum Order Size: 10,000 MT (Bulk shipment)
(Smaller quantities negotiable depending on supply terms)
k. Packaging Details: Bulk shipment via tanker vessel
Storage in terminal tanks
Delivery via tanker trucks (for local distribution)

Granular sulfur is the raw material state of sulfur. Granular sulfur consists of small yellow particles that quickly disperse or break down in the soil. Its physical form is solid, and as expected, it has a sulfuric odor. The material is soft, easily crumbles, and is insoluble in water, although it does dissolve in some organic solvents such as carbon disulfide.

It is sulfur that has been taken from the refinery or extracted from the mine and has not been processed. Sulfur can be found in pure form in nature, as well as in combination with other elements. Granular Sulfur is the unprocessed commercial name of the element Sulfur, that is, sulfur with its well-known name. Due to its physical condition, Lamp is the general name used for Sulfur, which is also called chips. Granular sulfur in agriculture, due to the hardness of its structure, oxidation is impossible, it can be used by making it powdered or micronized by physical interventions. In addition, such products are also called Granular Sulfur due to the fact that Powdered or Liquid sulfur can be mixed with other components to make it granular.

Granulated sulphur is mainly used in the production of sulfuric acid, phosphorus fertilizers, plant protection chemicals, paper, food industry, agriculture, auto tires, explosives, chemicals and dyes, wastewater treatment, such as wastewater treatment also finds a wide range of uses and in the steel industry. Granulated sulphur is used in the manufacture of sulfuric acid, phosphate fertilizers and plant protection products, and in the steel industry.