Find Verified Car Parking Systems Suppliers, Manufacturers and Wholesalers

SFlex I, applied for tennis court, volleybail, handball ground, consists of double compound la yer. 1st floor: EPDM granules + binder 2nd floor: EPDM ˜binder material 5 flex [is a rubber containing field floor permeable, srnooth jumping, resistible for a long time against al! weather conditions and irnpacts and prevents injurIes to playerÆs joints

Maximum Engine Power (Stand-By) 25 kVA
Maximum Engine Power (Prime) 22 kVA
Voltage 230/400 V
Light Power 4x1000 W
Total Light Power 4000 W
Brightness Level 30400 (5 Lumen/m2)
Auxiliary Car Plugs 2 x 220 V - 380 V
Tower Rise Capacity 9000 mm.
Rotation Capacity 360 Angle
Tower Movement System Hydrolic
Slope Angle <10
Wind Resilience Rate 80 km/h

PRSM-4000 : Hydraulic Universal Testing Machine,600 kN, 220-240V

PRSM-4000/110 : Hydraulic Universal Testing Machine, 600 kN, 110V

PRSM-4001 : Frame for 600 kN Hydraulic Universal Testing Machine

PRSM-4002 : Hydraulic Grips Jaw Faces Set for Round Specimens

PRSM-4003 : Hydraulic Grips Jaw Faces Set for Flat Specimens

PRSM-0500 : Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.01 mm),

PRSM-0510 : Extensometer for Universal Testing Machine, 100 mm Gauge Length (Accuracy 0.01 mm)

PRSM-0520 : Extensometer for Universal Testing Machine, 50 mm Gauge Length (Accuracy 0.001 mm)

PRSM-4000 Universal Hydraulic Tensile Test Machine is designed to test the ferrous materials for structural values such as yield strength and tensile strength. Apart from tensile tests, Universal Test Machines can also be used for compression tests up to the capacity of the machine.

Maximum security is maintained on 600kN capacity Universal Test Machine by limit switch on the lower grip and piston as well as the safety check valves on the hydraulic system. Hydraulic power unit works silently.0-40 mm flat and 8-32 mm round samples can be tested with a user friendly hydraulic jaws that comply with standards.

Load cell is used for load measurements. Strain measurement is done by the electronic displacement transducer built in the machine if required external extensometer fitted to the specimen also can be used for strain measurement. Strain measurements can be done directly from the extensometer fitted to the specimen.

Tests can be done fully automatic by digital control unit or computer. Machine complete the test with the set pace rate and turns to start position automatically.

PRSM-4000 Hydraulic Universal Testing Machine, features two test spaces for tension tests and compression tests. User can quickly change between tension and compression testing without having to remove heavy fixtures. This flexible design also helps to ensure safety, reduces operator effort and improves productivity.

The distance between the grips can be set by motor driven hand set system. With open front hydraulic wedge grips user can load specimen easily.

Product Code Product Description

PRS-AS0400 Ductility Testing Machine, 220-240 V 50-60 Hz

PRS-AS0420 Ductility Testing Machine with Cooling Unit, 220-240 V 50-60 Hz

PRS-AS0430 Force Ductility Testing Machine, EN 13589, 220-240 V 50-60 Hz

PRS-AS0402 Ductility Briquette Mould, ASTM D113 and AASHTO T51

PRS-AS0404 Ductility Mould Base Plate


PRS-AS0406 Ductility Mould, ASTM D6084, AASHTO T300 and EN13589 (force measurement ), Brass

PRS-AS0408 Ductility Mould, EN 13398

STANDARDS
PRS-AS0400 and PRS-AS0420 : EN 13398; ASTM D113, D6084; AASHTO T51
PRS-AS0430 : EN 13589, 13398, 13703; ASTM D113, D6084; AASHTO T51, AASHTO T300

The PRS-AS0400 Ductility Testing Machine is used to determine theductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min. It is designed for testing 4 specimens simultaneously. The Internal tank is made of stainless steel. The bath is fitted with an immersion heater in order to obtain (in normal conditions), the 25°C test temperature.

Each machine comprises speed control and water circulator to maintain the homogenous water temperature.

The PRS-AS0420 Ductility Testing Machine with Cooling Unit has the same specifications with PRS-AS0400 Ductility Testing Machine but with an additional cooling unit and It is not possible to convert PRS-AS0400 to PRS-AS0420 .

PRS-AS0430 Force Ductility Testing Machine has 4 loadcells. The accuracy of loadcells are ±0,1N with a maximum capacity of 300 N. The PRS-AS0430 has a cooling unit PRS-AS0430 model is equipped with TFT Graphic Display Automatic Control and Data Acquisition Unit. Failure condition can be down loaded to the Unit. Speed can be set and load-displacement curves are drawn through the software.
â?¢ Elongation measurement through motor encoder.
â?¢ 4 simultaneous load measurement with18 bit resolution.
â?¢ Speed contol with servo AC motor between 0,01 to 100 mm/min.
â?¢ Ethernet connection for computer interface.

Moulds and mould base plates should be ordered separately for all type machine.

Dimensions 300x1850x550 mm

Weight (approx.) 80 kg

Power 350 W

Our partner company produces DC regular and quick charging electric vehicle charging stations and central terminals with variable pistol counts, ranging from 20 kW to 800 kW. After experiencing swift adoption in the local market, we are expanding globally. We are prepared to talk about prospects with distributors and investors around the globe.

Our exclusive manufacturer client is producing powder metals for various industrial applications most notably 3D printers and augmented manufacturing. The exceptional product portfolio is tested and approved by leading corporate buyers in Turkey and now we are going global. Our partner excells the highest standards during production and achieves the best quality at water atomization and VIGA (Vacuum Induction Gas Atomization) techniques both.

Some of the final products for your requirements are as follows: Copper (Cu), bronze (85/15, 90/10), stainless powders (304, 316L), tin (Sn), aluminum (Al), zinc (Zn), Al12Si / AlSi10Mg.

Contact us for more details.

One of our exlusive partners, a leading agricultural producer and nursery company, is offering 35.000 pcs, 1-5 meter various sizes, super healthy condition, palm trees, Washingtonia Robusta, for your recreational needs at various projects.

99.9 % grade, high purity, has been tested and approved by leading industrial buyers, now open to export markets for your requirements.

Granules/capsules can be used more productively and efficiently in your process management since its much lower energy consumption during integration.

Highest efficiency level.
Lowest energy consumption for applications with need for continuous air flow.
Long lived operation system provided by reciprocal coupling.
Efficient transfer system due to elastic coupling
GENERAL CHARACTERISTICS
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
Direct coupling drive.
Silent and vibration free operation due to polyurethane coupling.
One- to- one (1:1) direct coupling.
Star triangulation starter system.
PLC control unit
Radiator with tropical type of air- oil combination. Provide excellent cooling at high temperatures and are long lasting.
Absorption valve providing high energy efficiency. Thermostatic valve which secures the operation of the compressor always always at the optimum temperature and prevents the condensation of the air inside the system.
Two- stage air absorption filter system.
Acoustic cabin with sound isolation.
Fully equipped security system.

Steel boom system in dimensions 1 9x 1 9x3 cm, Backboard made up of special secure glass 180x105x1,2 cm supported by profiles 40x40x2 mm, Electrostatic paint, Hydraulic ring, Folding and mobile, Certificated by the Institute of Turkish Standards, Padding system for protecting players, Padding against head hitting, 24 seconds apparatus, The boom and the body are connected by iron casting slot system

Microscope For Cracks On Concrete

Product Code Product Description
PRS-BCM Microscope For Cracks On Concrete

It is used for determining the cracks on concrete; Adjustable lighting system
Sensitive measurement ( 10 mm / 0.001 mm )
Focusing system

GENERAL CHARACTERISTICS
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
Belt pulley driven.
Maximum power and minimum maintenance with the poly-V belt pulley drive.
PLC control unit.
Star triangulation starter system.
Radiator with tropical type of air- oil combination.
Provide excellent cooling at high temperatures and are long lasting.
Absorption valve providing high energy efficiency.
Thermostatic valve which secures the operation of the compressor always always at the optimum temperature and prevents the condensation of the air inside the system.
Two- stage air absorption filter system.
Acoustic cabin with sound isolation.
Fully equipped security system.

We proudly offer our Manufacturer Company , one of the manufacturers of pipe fittings in Agricultural Irrigation sector, has been serving in pipe fittings manufacturing sector since 2013.

Our Manufacturer Company has equipped the machine park with the best technology in production and it is producing injection machines and other production machines supporting the production.

R & D department experts, creative, innovations and developments open to the needs of our customers in the domestic and foreign markets have the ability to produce a quick staff.

Our Manufacturer Company deserved quality certificates ISO 9001-2000 and TSE.

We have option colours black , blue and green for PP Compression Fittings .

We will gladly welcome your supplies

We proudly offer our Manufacturer Company , one of the manufacturers of pipe fittings in Agricultural Irrigation sector, has been serving in pipe fittings manufacturing sector since 2013.

Our Manufacturer Company has equipped the machine park with the best technology in production and it is producing injection machines and other production machines supporting the production.

R & D department experts, creative, innovations and developments open to the needs of our customers in the domestic and foreign markets have the ability to produce a quick staff.

Our Manufacturer Company deserved quality certificates ISO 9001-2000 and TSE.

We have option colours black , blue and green for PP Compression Fittings .

We will gladly welcome your supplies.

We proudly offer our Manufacturer Company , one of the manufacturers of pipe fittings, dripping accessories , valve boxes and drip pipe in Agricultural Irrigation sector, has been serving in pipe fittings manufacturing sector since 2013.

Our Manufacturer Company has equipped the machine park with the best technology in production and it is producing injection machines and other production machines supporting the production.

R & D department experts, creative, innovations and developments open to the needs of our customers in the domestic and foreign markets have the ability to produce a quick staff.

Our Manufacturer Company deserved quality certificates ISO 9001-2000 and TSE.

We have option colours black , blue and green for PP Compression Fittings .

We will gladly welcome your supplies

We proudly offer our Manufacturer Company , one of the manufacturers of pipe fittings, dripping accessories , valve boxes and drip pipe in Agricultural Irrigation sector, has been serving in pipe fittings manufacturing sector since 2013.

Our Manufacturer Company has equipped the machine park with the best technology in production and it is producing injection machines and other production machines supporting the production.

R & D department experts, creative, innovations and developments open to the needs of our customers in the domestic and foreign markets have the ability to produce a quick staff.

Our Manufacturer Company deserved quality certificates ISO 9001-2000 and TSE.

We have option colours black , blue and green for PP Compression Fittings .

We will gladly welcome your supplies

Product Code Product Description

PRS-ZE0000-02 Direct Shear Test Machine ( Digital )

STANDARDS : TS 1900-2,ASTM D3080,BS 1377-7,AASHTO T236,NF P094 071-1/2

The System is capable of performing the consolidation and shearing phases of a standard direct shear and residual shear test under full automatic control.

The system consists of a computer-controlled unit that utilizes micro-stepper motors to apply the vertical and horizontal loads to the soil specimen. The system is capable of doing a consolidation process at 32 phase automatically.

Horizontal shearing can be applied at a specified rate of deformation or at a specified rate of horizontal force change, or at a specified set of force steps of a specified duration.
The system is capable of displaying the current status of a test and graphically portraying the progress of the test in real time. The system includes the capability for the operator to alter the test process and conditions at any stage of the test.

Technical Specifications

Capacities 2.5 Kn, 5 Kn or 10 Kn

Vertical Engine Stepper engine with built-in controls for vertical load

Horizontal Engine stepper motor with built-in controls for horizontal load

Speed Range 0.00003 to 15 mm per min.

Horizantal Travel +125 mm

Vertical Travel 12.5 mm

Power supply 220-240 V 1 ph 50 Hz 750 W

Dimensions: 228 x 560 x 762 mm

Tank top Screw Type Compressors
Compact design, advanced technology
High quality, dry air due to integrated dryer
Highest performance level with the most convenient investment cost
Affordable service cost and maintenance easiness
Uninterrupted production with high quality air
Easy installation and minimum fixing cost
Low noise level & silent operation
GENERAL CHARACTERISTICS
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
Belt pulley driven.
Maximum power and minimum maintenance with the poly-V belt pulley drive.
PLC control unit.
Star triangulation starter system.
Radiator with tropical type of air- oil combination.
Provide excellent cooling at high temperatures and are long lasting.
Absorption valve providing high energy efficiency.
Thermostatic valve which secures the operation of the compressor always always at the optimum temperature and prevents the condensation of the air inside the system.
Two- stage air absorption filter system.
Acoustic cabin with sound isolation.
Fully equipped security system.

Non-toxic, solvent-free silicone sealant for use in aquarium construction and glazing applications. It's a high-quality acetic curing system-based silicone sealant featuring excellent adhesion to glass and many other non porous surfaces.

Acetoxy base moisture curing and temperature resistance up to 300 C suitable for oven doors, hotplates, heating systems and joints where high temperature resistance is necessary. Temperature resistance up to 300 C. High adhesion. Solvent free. %100 silicone.

NeoPro Collagen Plus combines every advantage of type I/III collagen consumption (firmer skin, healthier hair and nails, elasticity and moisturizing of skin support, wrinkle reduction, circulation and digestive system improvements, bone density increase, muscle tissues strengthening, etc) with an affordable price.

MOQ= 100 boxes

PRS-EU8050 " Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph.

PRS-EU8300 " Electromechanical Universal Test Machine, 300 kN, 220-240V, 50-60Hz, 1 ph.

PRS-EU8050, 50 kN and PRS-EU8300, 300 kN capacity fully automatic Electromechanical ParsRos Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. PRS-EU8050 and PRS-EU8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories.

Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories.
These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system.

The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor.

Advanced closed loop control system assures accurate load or displacement pace rate on sample.

The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models.

The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.

The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.

Product Code Product Description

PRS-KA0552 Manual (Hand Operated) Pressure System for Lateral Pressure in Hoek Triaxial Cell

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRSGE-3800 Hydraulic Hand Pump, 700 bar.

PRSC-0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407
The manual pressure system is used for maintaining the constant lateral pressure in the Hoek triaxial cells and consists of a hydrolic hand pump with oil reservoir (PRSGE-3800), a precision LPI digital readout unit (PRS-B4920), a pressure transducer (PRSGM-0110) and a 3 m long flexible hose with quick release coupling.
The manuel pressure system is used with any Hoek triaxial cell and 2000 kN Automatic Compression Testing Machine (PRS-B4231) for the triaxial tests. Other type of PARSROS compression testing machine (respect to the capacity) can be used instead of PRS-B4231.

Technical Specifications LateralPressure Equipment PRS-B4231
Max. Working Pressure 700 bar (70 MPa) 410 bar
Dimensions 1050x500x300 mm 800x500x970 mm
Weigth (approx.) 20 kg 795 kg

Power Unit
Manufacture:deutz
Power:141 Kw (160hp)
Mast And Feed System
Pull Up:13.000 Kg
Pull Down:7.1000 Kg
Feed Travel :3,5 M
Main Hoist
Single Line Capacityä°:9.000 Kg
Rotaton Unit
Spindle Diameter:117 Mm
Side Shift:300mm
Mounting Tipe:crawler- Truck-skid
Depth Capacity
Bq:1000
Nq:750
Hq:400
Pq:150

Power Unit

Manufacture:fcummins/ford/mercedes

Power:235 Kw (320hp)

Mast And Feed System

Pull Up:15.700 Kg

Pull Down:8.000 Kg

Feed Travel :3,5 M

Main Hoist

Single Line Capacity : 12.000 Kg

Rotaton Unit

Spindle Diameter:117 Mm

Side Shift:300mm

Mounting Tipe:crawler- Truck-skid

Depth Capacity

Bq:2000

Nq:1500

Hq:1000

Power Unit

Manufacture:man/mercedes/cummins

Power:235 Kw (320hp)

Mast And Feed System

Pull Up:22.600 Kg

Pull Down:12.000 Kg

Feed Travel :3,5 M

Main Hoist

Single Line Capacity : 19.000 Kg

Rotaton Unit

Spindle Diameter:117 Mm

Side Shift:300mm

Mounting Tipe:crawler- Truck-skid

Depth Capacity

Bq:1000

Nq:750

Hq:400

Power Unit
Manufacture:man/mercedes/cummins
Power:235 Kw (320hp)
Mast And Feed System
Pull Up:22.600 Kg
Pull Down:12.000 Kg
Feed Travel :3,5 M
Main Hoist
Single Line Capacityä°:19.000 Kg
Rotaton Unit
Spindle Diameter:117 Mm
Side Shift:300mm
Mounting Tipe:crawler- Truck-skid
Depth Capacity
Bq:1000
Nq:750
Hq:400
Pq:150

Power Unit
Manufacture:cummins/ford/mercedes
Power:235 Kw (320hp)
Mast And Feed System
Pull Up:15.700 Kg
Pull Down:8.000 Kg
Feed Travel :3,5 M
Main Hoist
Single Line Capacityä°:12.000 Kg
Rotaton Unit
Spindle Diameter:117 Mm
Side Shift:300mm
Mounting Tipe:crawler- Truck-skid
Depth Capacity
Bq:2000
Nq:1500
Hq:1000
Pq:600
For Details Contact Please

Engine Brand VOLVO
Model TAD1643GE
Maximum Engine Power (Stand-By) 596 KW
Maximum Engine Power (Prime) 536 KW
Engine Volume 16,12
Engine Overdrive 1500 d/d
Cylinders and Sequence: 6L
Bore x Stroke 144x165
Governor Type Elektronik
Electricity System 24V
Oil Volume 48 Liter
Water Capacity 128 Liter
Fuel Capacity 1140 Liter
Fuel Consumption (100 % Lt./Sa.) 118

Engine Brand SDEC
Model SC7H230D2
Maximum Engine Power (Stand-By) 187 KW
Maximum Engine Power (Prime) 170 KW
Engine Volume 6,44
Engine Overdrive 1500 d/d
Cylinders and Sequence: 6V
Bore x Stroke 105x124
Governor Type Elektronik
Electricity System 24V
Oil Volume 17 Liter
Water Capacity 9 Liter
Fuel Capacity 368 Liter
Fuel Consumption (100 % Lt./Sa.) 36

Engine Brand SDEC
Model SC33W1150D2
Maximum Engine Power (Stand-By) 946 KW
Maximum Engine Power (Prime) 860 KW
Engine Volume 32,8
Engine Overdrive 1500 d/d
Cylinders and Sequence: 12V
Bore x Stroke 180x215
Governor Type Elektronik
Electricity System 24V
Oil Volume 75 Liter
Water Capacity 56 Liter
Fuel Capacity 935 Liter
Fuel Consumption (100 % Lt./Sa.) 189

ngine Brand DOOSAN
Model D1146T
Maximum Engine Power (Stand-By) 114 KW
Maximum Engine Power (Prime) 103 KW
Engine Volume 8,071
Engine Overdrive 1500 d/d
Cylinders and Sequence: 6L
Bore x Stroke 111x139
Governor Type Elektronik
Electricity System 24V
Oil Volume 15 Liter
Water Capacity 34 Liter
Fuel Capacity 250 Liter
Fuel Consumption (100 % Lt./Sa.) 26

Engine Brand DOOSAN
Model DP222LC
Maximum Engine Power (Stand-By) 723 KW
Maximum Engine Power (Prime) 657 KW
Engine Volume 21,927
Engine Overdrive 1500 d/d
Cylinders and Sequence: 12V
Bore x Stroke 128x142
Governor Type Elektronik
Electricity System 24V
Oil Volume 40 Liter
Water Capacity 114 Liter
Fuel Capacity 1050 Liter
Fuel Consumption (100 % Lt./Sa.) 161

Engine Brand RICARDO
Model 7485BD
Maximum Engine Power (Stand-By) 18,7 KW
Maximum Engine Power (Prime) 17 KW
Engine Volume 2.043
Engine Overdrive 1500 d/d
Cylinders and Sequence: 4
Bore x Stroke 85x95
Governor Type Mekanik
Electricity System 12V
Oil Volume 8 Liter
Water Capacity 14 Liter
Fuel Capacity 85 Liter
Fuel Consumption (100 % Lt./Sa.) 4

Engine Brand RICARDO
Model SC12H350e
Maximum Engine Power (Stand-By) 352 KW
Maximum Engine Power (Prime) 320 KW
Engine Volume 9,7
Engine Overdrive 1500 d/d
Cylinders and Sequence: 6L
Bore x Stroke 126x155
Governor Type Elektronik
Electricity System 24V
Oil Volume 25 Liter
Water Capacity 55 Liter
Fuel Capacity 345 Liter
Fuel Consumption (100 % Lt./Sa.) 63

Engine Brand YANG DONG
Model Y385
Maximum Engine Power (Stand-By) 13,2 KW
Maximum Engine Power (Prime) 12 KW
Engine Volume 1,809
Engine Overdrive 1500 d/d
Cylinders and Sequence: 4L
Bore x Stroke 80x90
Governor Type Mekanik
Electricity System 12V
Oil Volume 8 Liter
Water Capacity 12 Liter
Fuel Capacity 78 Liter
Fuel Consumption (100 % Lt./Sa.) 4

Engine Brand YANG DONG
Model Y490
Maximum Engine Power (Stand-By) 30 KW
Maximum Engine Power (Prime) 27,2 KW
Engine Volume 3,168
Engine Overdrive 1500 d/d
Cylinders and Sequence: 4L
Bore x Stroke 98x105
Governor Type Mekanik
Electricity System 12V
Oil Volume 9 Liter
Water Capacity 14 Liter
Fuel Capacity 85 Liter
Fuel Consumption (100 % Lt./Sa.) 7

Engine Brand Perkins
Model : 403A-11G1
Maximum Engine Power (Stand-By) : 9,2 KW
Maximum Engine Power (Prime) : 8,3 KW
Engine Volume : 1,13
Engine Overdrive : 1500 d/d
Cylinders and Sequence: 3L
Bore x Stroke : 77x81
Governor Type Mekanik
Electricity System : 12V
Oil Volume : 4 Liter
Water Capacity : 5 Liter
Fuel Capacity : 60 Liter
Fuel Consumption (100 % Lt./Sa.) : 3

Engine Brand : PERKINS
Model : 4016-61TRG3
Maximum Engine Power (Stand-By) : 2083 KW
Maximum Engine Power (Prime) : 1875 KW
Engine Volume : 61,12
Engine Overdrive : 1500 d/d
Cylinders and Sequence: 16V
Bore x Stroke : 160x190
Governor Type : Elektronik
Electricity System : 24V
Oil Volume : 237 Liter
Water Capacity 260 Liter
Fuel Capacity 20900 Liter
Fuel Consumption (100 % Lt./Sa.) 470

Engine Brand VOLVO
Model TD530GE
Maximum Engine Power (Stand-By) 83 KW
Maximum Engine Power (Prime) 74 KW
Engine Volume 4,76
Engine Overdrive 1500 d/d
Cylinders and Sequence: 4L
Bore x Stroke 108x130
Governor Type Elektronik
Electricity System 12V
Oil Volume 13 Liter
Water Capacity 20 Liter
Fuel Capacity 145 Liter
Fuel Consumption (100 % Lt./Sa.) 16

A. Name of product = Whole Wheat Flour

B. Price of product = This can be negotiable and depends of the Incoterms and requested amount

C. Product origin = Turkey

D. Key Specifications/Special Features = High Quality // Good Taste // Healthy // Occur High Test Reports

E. Harmonization System (HS) Code: 110100

F. Minimum Order Size : 1 Full Container (which makes 25,500kgs flour)

G. Packaging Details: 1pcs Paper Package / 5pcs Sacks / 25pcs Sacks

we can make all type of elevator car , such as stainless steel , decorative steel , glass , panoramic , hospital elevator car and laminate car .

Product Code Product Description

PRS-B1050 Melting Pot 3 lt. Capacity, 220-240 V 50-60 Hz

PRS-B1050/110 Melting Pot 3 lt. Capacity, 110 V 60 Hz


The PRS-B1050 melting pot is used for melting the capping compound. The apparatus consists of a 3 litre capacity aluminium container in a well-lagged steel jacket, cover and thermostatic control heating system to keep the temperature constant in the range of ambient to 200 ºC.

Dimensions350x320x290 mm
Weight (approx.)9 kg
Power600 W

Microwave Oven

Product Code Product Description

PRSD-1420 Microwave Oven 19 lt., 220-240 V 50-60 Hz

The PRSD-1420 Microwave Oven is used for drying, conditioning, moisture determination and pre-heating applications when quick drying is required.

The PRSD-1420 has max. 250°C, 100 min. program timer, rotating tray system, 2000 W

Capacity 19 litres

Working Frequency 2450 Mhz

Internal Dimensions 210x295x315 mm

External Dimensions 50x300x300 mm

Weigth (approx.) 11 kg

Power 2000 W

PRODUCT SPECIFICATION
Automatic packaging ranging from 10 kq to 50 kq
Fully automized 45-55-65-75 calibration options
Peeling the onion in fully automatic machines within the sizes 65 mm and above
Product storage is carried out in our cold stores


Harmonized System Code
HS Code: 0703.10.19.00.11 for
Dry Onion/Organic Dry Onion
Pilling dry onion/ Organic pilling dry onion

PAYMENT TERMS
100% advance
Sight or deferred L/C accepted from convenient local or international banks. Trading bank Deniz Bank (Turkey) is the Emirates Group Company.
FOB and CIF prices are negotiable.

PRODUCT SPECIFICATION
Automatic packaging ranging from 10 kq to 50 kq
Fully automized 45-55-65-75 calibration options
Peeling the onion in fully automatic machines within the sizes 65 mm and above
Product storage is carried out in our cold stores

HARMONIZED SYSTEM CODE
HS Code: 0703.10.19.00.11 for Dry Onion/Organic Dry Onion
Pilling dry onion/ Organic pilling dry onion

PAYMENT TERMS
100% advance
Sight or deferred L/C accepted from convenient local or international banks. Trading bank Deniz Bank (Turkey) is the Emirates Group Company.
FOB and CIF prices are negotiable.

The sliding door and pence system provides high insulation as well as an impressive and elegant appearance with its slim and very light profile. In addition, the system meets high quality standards while not exceeding the industry's price level. This gives architects the freedom to achieve significantly higher temperature, wind, sound/acoustic, waterproofing and insulation values at price levels previously unattainable.

Thanks to its advanced technology, Talya creates open spaces and glazed surfaces, providing much greater transparency and allowing light to penetrate into the building. It also offers a high level of thermal performance in addition to its elegantly slim 34 mm profile.

Video and Audio Intercom Systems
Video communication between flats,touch button ,handsfree,decorative,sliding,surface mount,2 speaker channel(which one flat is communicating with door,another flat is also ability to communicate doorkeeper or security man at the same time),ability to contact gate and doorkeeper, to open the door,3 different ringtones,ability to arrange ringtone(ability to close ringtone completely),amutomatic and manuel shut down,front gate monitoring,optionally,if required,it is able to monitoring different 8 areas(car park,children's park etc.) by connected to camera,monitoring different areas,brightness and color setting,led indicator for busy sitauation,contact security man,security camera monitoring (for further details and other models please contact )

Product Code Product Description

PRS-ASKW00126 Kinematic Viscosity Apparatus

STANDARDS : ASTM 2170,AASHTO T201,EN 12595
The temperature, from room temperature to 135°C, remains constant within ± 0.1°C. Electric stirrer, electric heater and cooling (COIL) system. Digital read-out and regulation of temperature. Safety device for temperature and water level with alarms. 19 litre bath in pyrex glass with external protection in plexiglass. Support base with housing seats.
Capacity: Five viscometers to be ordered separately according to viscosity.

Dimensions 300 x 300 x 500 (h) mm.
Power supply 220 V, 50 Hz, single phase, 1700 Watts
Weight 12 kg.

TECHNICAL SPECIFICATIONS
DC-PWM driver without limit switch
220 V AC supply voltage
24 V DC brushed motor
Double channel (A,B) 100 ppr encoder
Clear opening dimension (700mm~900mm)
The number of opening/closing cycles per year
600.000
Multiple electronic settings
Size, length and velocity parameters
Door power that can be adjusted separately on
opening and closing directions
Compatibility with variation of open/close
command signals (24 V DC-220 V AC)
Ability to operate with single (close) signal
Adjustment of short circuit types as NO/NC
Multiple mechanic adjustments
Practical assembly
Panel adjustment in 3 axes
Adjustability of clear opening
Places of use
Low traffic building and houses