Product Code Product Description
PRS-ASKW00126 Kinematic Viscosity Apparatus
STANDARDS : ASTM 2170,AASHTO T201,EN 12595
The temperature, from room temperature to 135°C, remains constant within ± 0.1°C. Electric stirrer, electric heater and cooling (COIL) system. Digital read-out and regulation of temperature. Safety device for temperature and water level with alarms. 19 litre bath in pyrex glass with external protection in plexiglass. Support base with housing seats.
Capacity: Five viscometers to be ordered separately according to viscosity.
Dimensions 300 x 300 x 500 (h) mm.
Power supply 220 V, 50 Hz, single phase, 1700 Watts
Weight 12 kg.
Specification: Color: 1.5, Flash Point:142, Density: 0.8412, Kinematic Viscosity 40c: 7.222, Kinematic Viscosity 100c: 2.233 (Detailed Specification Sheet attached) Quantity Available: 222000 kg Location: Mundra, India. Country Of Origin, United Arab Emirates
Test Result Appearance : Clear & Bright Flash Point Range : 120-170 C Density @ 29 C : 0.8356 Kinematic Viscosity@ 40 C : 7.469 Kinematic Viscosity@ 100 C : 2,74 Copper Corrision : 1a Pour Point : -12
1. Characteristics - Appearance Method - Visual Unit - Result - Bright & Clear 2 . Characteristics - Color Method - ASTM D 1500 Unit - ASTM Color Result - 2.5 3 . Characteristics - Density @ 15.6 Method - ASTM D 1298 Unit - G/CM3 Result - 0.868 4 . Characteristics - Kinematic Viscosity @ 100 Method - ASTM D 455 Unit - MM2/S Result - 15.92 5 .Characteristics - Kinematic Viscosity @ 40 Method - ASTM D 455 Unit - M2/S Result - 107.38 6 . Characteristics - Viscosity Index Method - ASTM D 2270 Unit - Result - 158.47 7. Characteristics - Pour Point Method - ASTM D 97 Unit - Result - -6 8 . Characteristics - Flash Point Method - ASTM D 92 Unit - Result - 192
Density @15C : 0.8833 kg/L Kinematic Viscosity @50C : 6.010 cSt Flash Point (Proc.B):
Specification : Test Method Result Flash Point : ASTM D93 (A) 52 C Density @ 15 C : ASTM D 4052 0.8236 Kinematic Viscosity@ 40 C : ASTM D 455 2.693 Sulphur Content : ASTM D 4294 0.0275 IBP : ASTM D 86 160 FBP : ASTM D 86 >400
Introduction of Vulcanized Cottonseed Oil T403 is a light color, low-odor, non-active vulcanized extreme pressure antiwear additive with high viscosity. Good adhesion, thick oil film, high anti-wear characteristics, suitable for metal plastic deformation process. The main agent is used to reconcile medium and high-end stamping oil and drawing oil. Can also be used in the adhesive industry, and leather line. The industry is used as an additive. Intermiscibility of Vulcanized Cottonseed Oil It is soluble in a class of base oil and ester base oil, but not easily soluble in hydrogenation base oil. It is recommended to perform a compatibility test before use. Compatibility of Vulcanized Cottonseed Oil It can not be used with T202, T203, and other antioxidant and anticorrosive agents, otherwise, it will lead to the decomposition of sulfur agent; It can be adhered to LAB Sulfonate LS550, and tacifer was used synergistically. Application of Vulcanized Cottonseed Oil It is an inactive sulfur, belonging to vegetable fat sulfide, which can not be used for the modulation of rail oil. As an anti-wear agent, it is suitable for the modulation of metal processing oil/liquid for drawing, cold heading, drawing, and rolling of all materials. The recommended treat rate is 5%~10%. Item Data Test Method Chroma 8.0 GB/T 6540 Sulfur Content, wt% 9-11 GB/T 17040 Active Sulfur Content, wt% 1 GB/T 17040 Kinematic Viscosity (40C), mm /s 650-800 GB/T 265 Flash Point (COC), C 200 GB/T 3536 Density (20C), g/cm3 0.95-1.0 SHT 0604 Pb, N (10%) 833 GB/T 3142 Pd, N (10%) 6080 GB/T 3142 Copper Corrosion (100�ºC/3h) 10% 1b GB/T 5096
Brand: Total (France) Kinematic Viscosity: 150 Volume: 208 L Package: Factory sealed Pour point, C: -6 Description: Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors. Applications: For use in conditions where the discharge temperature does not exceed 1000 C, otherwise the use of synthetic oils is preferred. Specification: ISO 6743-3 classified DAG and DAB for heavy duty applications. DIN 51 506 VD-L for the use in reciprocating air compressors DACNIS 150 Manufacturer approvals: Depending on the viscosity grades, Dacnis meet the requirements of: BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE etc. Features and benefits: DACNIS oils contain high performance additives to: avoid the carbon build up. allow a good oil/air and oil/condensates separation. anticlogging property that ensures the efficiency of the filters during a long period protect components against wear and corrosion. The use of DACNIS allows real cuts in the operating costs of the compressed air production facility by optimizing the compressor efficiency. Extending the service life of the separating filter elements.
Specification : Test Method Result Appearance : Visual Clear & Bright Color : ASTM D 1500 L 0.5 Flash Point : ASTM D93 (A) 192 C Density @ 15 C : ASTM D 1298 0.8596 Kinematic Viscosity@ 40 C : ASTM D 455 20.9 Kinematic Viscosity@ 100 C : ASTM D 455 4.17 Viscosity Index : ASTM D 4294 100 Pour Point : ASTM D 2270 160 FBP : ASTM D 97 -100
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 2.47 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 7.16 ASTM D-445 3 Density @ 15 C Kg/m3 0.8394 ASTM D-7042 4 Flash Point, ,COC, Min. C 122 ASTM D-92 5 Color- Max - 0.5 ASTM D-1500 6 Appearance - C & B Visual 7 Viscosity Index - 203 ASTM D-2270 8 Pour Point C -6 ASTM D-97
