Find Verified Bathing Bars Suppliers, Manufacturers and Wholesalers

Product Code Product Description

PRS-CM0016 Le Chatelier Water Bath, 220-240 V 50-60 Hz

STANDARDS : EN 196-3, 450-1, 459-2; EN ISO 9597

The PRS-CM0016 Le Chatelier Water Bath is used with Le Chatelier moulds for the determination of the soundness of cement paste fly ash for concrete and lime. The internal chamber and the insulated exterior case of the bath are manufactured from stainless steel. The Bath is capable of reaching boiling point in 30 minutes by using two heater units.

There is a timer on the PRS-CM0016 Le Chatelier Water Bath which is used to set the time for reaching the boiling point. After that time the temperature of water is regulated by using one heater unit to conserve energy. Supplied complete with a removable rack to hold up to 10 moulds. A cover is also supplied as standard.
Dimensions 210x470x290 mm
Weight (approx.) 8 kg
Power 1250 W

Product Code Product Description

PRS-CM0003 Le Chatelier Flask

STANDARDS : EN 196-6, 450-1, 15617-1; ASTM C110, C128, C188; C989; AASHTO T133

The PRS-CM0003 Le Chatelier Flask is used to determine the density of hydraulic cement, ground granulated blast-furnace slag and fly ash for concrete, filler aggregates and lime.The glass flask has a 250ml capacity. The neck is graduated from 0 to 1 ml and from 18 to 24 mL in 0.1-mL graduations.

Dimensions 100x100x300 mm

Weight (approx.) 0.1 kg

Product Code Product Description

PRS-CM0010 Le Chatelier Mould

PRS-CM0014 Le Chatelier Soundness Kit

STANDARDS : EN 196-3, 450-1, 459-2; EN ISO 9597

The soundness of cement, fly ash for concrete and lime is determined by using the Le Chatelier moulds and Le Chatelier Water Bath (PRS-CM0016) according to the relevant standard.

The Le Chatelier Soundness Kit is supplied complete with;
Le Chatelier moulds 3 pcs.
50x50 mm glass plates 6 pcs.
300 gr Weights 1 pcs.
100 gr Weight, 3 pcs.
Tamping Rod 17 mm dia. x 70 gr
Steel Ruler
Plastic Carrying Case

Dimensions 340x290x80 mm

Weight (approx.) 2 kg

Steel bars

Product Code Product Description

PRS-ZE0270 Hydrometer Test Set

PRS-ZE0272 Soil Dispersion Mixer, 220-240 V 50-60 Hz

PRS-ZE0273 Hydrometer Bath, 220-240 V 50-60 Hz

PRS-ZE0274 Hydrometer 151H

PRS-ZE0275 Hydrometer 152H

PRS-ZE0276 Hydrometer Jars, 1000 ml

PRSGC-0900 Sodium Hexametaphosphate, 1kg

STANDARDS : ASTM D422; AASHTO T88

Hydrometer Test Set is used to determine the particle size distribution of very fine materials such as silt and clay.
The soil dispersion mixer for hydrometer test method, operates at over 13,000 r.p.m, includes dispersion cup, stirring paddle, automatic switch-on by positioning bowl, 100 W power consumption
The hydrometer bath, circulation unit, ambient to 35°C working temperature, 50 L capacity tank with 8 pcs. sedimentation cylinder capacity.

152H Hydrometer should be ordered separately.

The Hydrometer Test Set is supplied complete with;
Dispersion mixer
Hydrometer bath
Hydrometer, 151H, 1pcs.
Sodium hexametaphosphate 1 kg,
Sedimentation cylinder, 1000 ml, 6 pcs.
Heater,
Circulation unit
Rubber stopper for sedimentation cylinder
Beaker, 600 cc

151 H Hydrometer 11 â?? Length 0,995-1,038 g/ml Ä°n 0,001 g/ml division

152H Hidrometre 11â?� Lenght 5 - 60 g/L in 1g/L Ä°n 1g/L division

Dimensions 330x630x450 mm

Weight (approx.) 20 kg

Product Code Product Description

PRS-KA0552 Manual (Hand Operated) Pressure System for Lateral Pressure in Hoek Triaxial Cell

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRSGE-3800 Hydraulic Hand Pump, 700 bar.

PRSC-0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407
The manual pressure system is used for maintaining the constant lateral pressure in the Hoek triaxial cells and consists of a hydrolic hand pump with oil reservoir (PRSGE-3800), a precision LPI digital readout unit (PRS-B4920), a pressure transducer (PRSGM-0110) and a 3 m long flexible hose with quick release coupling.
The manuel pressure system is used with any Hoek triaxial cell and 2000 kN Automatic Compression Testing Machine (PRS-B4231) for the triaxial tests. Other type of PARSROS compression testing machine (respect to the capacity) can be used instead of PRS-B4231.

Technical Specifications LateralPressure Equipment PRS-B4231
Max. Working Pressure 700 bar (70 MPa) 410 bar
Dimensions 1050x500x300 mm 800x500x970 mm
Weigth (approx.) 20 kg 795 kg

Product Code Product Description

PRS-ASKW00126 Kinematic Viscosity Apparatus

STANDARDS : ASTM 2170,AASHTO T201,EN 12595
The temperature, from room temperature to 135°C, remains constant within ± 0.1°C. Electric stirrer, electric heater and cooling (COIL) system. Digital read-out and regulation of temperature. Safety device for temperature and water level with alarms. 19 litre bath in pyrex glass with external protection in plexiglass. Support base with housing seats.
Capacity: Five viscometers to be ordered separately according to viscosity.

Dimensions 300 x 300 x 500 (h) mm.
Power supply 220 V, 50 Hz, single phase, 1700 Watts
Weight 12 kg.

RYT-4220 : Plate Bearing Test Set 200 kN Capacity

RYT-4222 : Plate Bearing Test Set 500 kN Capacity

Plate Bearing Test Set is performed for the determination of the bearing capacity of a soil in-situ on road constructions, foundations, road subgrades, airport and highway pavements. A wide range of plate bearing test equipment are available, together with many accessories according to the different Standards and specific enduser needs. All test sets supplied complete with 1,5 m long flexiable hose with quick release coupling.

The RYT-4220 Plate Bearing Test Set 200 kN is supplied complete with:

Dimensions : 650x350x600 mm

Weight : 130 kg

200 kN Capacity Piston Assemly

Hydraulic Hand Pump,

Pressure Transducer,

Datum Bar - 2.4 m long , 3 pcs.

25 mm travel x 0.01 mm digital dial gauges with dial supports,

300 mm and 450 mm dia. loading plates,

The RYT-4222 Plate Bearing Test Set 500 kN is supplied complete with:

500 kN Capacity Piston Assemly
Hydraulic Hand Pump,
Pressure Transducer,
Datum Bar - 2.4 m long , 3 pcs.
25 mm travel x 0.01 mm digital dial gauges with dial supports,
600 mm and 760 mm dia. loading plates

PRS-ZE1200 : Plate Loading Test Set with Digital Dial Gauges & LPI Digital Readout Unit, 200 kN

PRS-ZE1201 : Plate Loading Test Set with Digital Dial Gauges & LPI Digital Readout Unit, 500 kN

PRS-ZE1202 : Piston Assemly, 200 kN capacity, for Plate Load Bearing Test Sets

PRS-ZE1203 ; Piston Assemly, 500 kN capacity, for Plate Load Bearing Test Sets

PRSGE-3800 : Hydraulic Hand Pump, 700 bar.

PRS-ZE1204 ; Loading Plate Ã? 300 mm for PRS-ZE1200

PRS-ZE1205 : Loading Plate Ã? 450 mm for PRS-ZE1200

PRS-ZE1206 ; Loading Plate Ã? 600 mm for PRS-ZE1201

PRS-ZE1207 ; Loading Plate Ã? 760 mm for PRS-ZE1201

PRS-ZE1220 : Plate Loading Test Set, with Displacement Transducers and Data Logger, 200 kN

PRS-ZE1221 : Plate Loading Test Set, with Displacement Transducers and Data Logger, 500 kN


This test method is used to estimate the bearing capacity of a soil under field loading conditions for a specific loading plate and depth of embedment (ASTM D1194). It is also used for load tests of soil and flexible pavement components for use in evaluation and design of airport and highway pavements.

PRS-ZE1200 Plate Loading Test Set consists of a 200 kN capacity piston assemly and hydraulic hand pump, pressure transducer, LPI battery operated digital readout unit, 2.4 m long datum bar, 3 pcs. 25 mm travel x 0.01 mm digital dial gauges with dial supports, 300 mm and 450 mm dia. loading plates,


PRS-ZE1201 Plate Loading Test Set Set consists of a 500 kN capacity piston assemly and hydraulic hand pump, pressure transducer, LPI battery operated digital readout unit, 2.4 m long datum bar, 3 pcs. 25 mm travel x 0.01 mm digital dial gauges with dial supports, 600 mm and 760 mm dia. loading plates.


All test sets supplied complete with 1,5 m long flexiable hose with qu

L Shape Box Apparatus

Product Code Product Description

PRS-B0545 L Shape Box Apparatus

STANDARDS : EN 12350-9

The PRS-B0545 L Shape Box is used for determining the passing ability rate of freshly mixed self compacting concrete.

The distance between 12 mm diameter bars can be set between 41±1 mm or 59±1 mm.

L Shape Box is designed for ease of cleaning the vertical and horizontal hoppers.

The L Shape Box Apparatus is supplied complete with;
Filling Hopper
Base

Dimensions 300x1000x1350 mm
Weight (approx.) 35 kg

Product Code Product Description

PRS-CMA0050 Automatic Vicat Apparatus

STANDARDS : EN 196-3:2005; EN 13279-2 (GYPSUM);EN 480-2 /ASTM C187, ASTM C191

The Vicatronic apparatus, that is designed and manufactured using the most recent and sophisticated technology, is used for the initial and final setting time determination of cements or mortar pastes.Movements along X Y Z axes Up to 30 different test types may be programmed and over 1000 tests may be memorized. PC Port Initial and final setting time (in 0.1 mm) Automatic cleaning of the needle Automatic stop and storage of measurements up to 50 tests.

Plunger for initial consistency Thermostatic baths (optional)

GLCD display for data input and diagram/test report.Printer for final test report and diagram

RS 232 serial port for PC connection Moulds and further needles have to be ordered separately, according to the various standards.

Power supply 220 V, 50 Hz, single phase.

Weight 40 kg.

Water Impermeability Tester ( 3 Unit )

Product Code Product Description

PRS-BWIT3 Water impermeability Tester ( 3 Unit )

STANDARDS : TS EN 12390-8,EN 12364,DIN 1048,ISO 7031

Apparatus at 3 or 6 points to determine the depth of penetration of the water into the concrete (impermeability) under known time and pressure The unit accepts up to 3 concrete cubic, cylindrical or prismatic specimens having max. dimensions of 200x200x200 mm

The specimen is put into the test chamber, clamped with suitable flanges and gaskets, and then a known water pressure is applied on the specimenâ??s surface for a time as requested by Standard, by using a suitable air compressor (accessory) having at least 5 or 20 bar pressure capacity

The water penetrated is measured by breaking the specimen, or by reading the water permeated through the graduated burette fixed on the front panel

Dimension 1290 x 450 x 1280 mm

Weight 120 kg (app.)

Levom Fruit Bar: No sugar added, GMO & Gluten free, Antioxidant, VE GAN, Rich in Vitamins & Minerals, No Artificial colors added, Rich in Fiber, No preservatives added and GOOD FOR YOUR HEALTH!!!

Product Code : Product Description

PRS-ZE0865 : In-situ CBR Test Apparatus

PRS-ZE0866 : Cutting Collar (edge) for PRS-ZE0865

PRS-ZE0867 : Conversion Frame

STANDARDS :

The PRS-ZE0865 -situ CBR Test Apparatus, 50 kN capacity,is used for the on-site determination of the bearing capacity of soils used in road construction.

The set consists of:
50 kN capacity mechanical jack with ball seating
50 kN capacity load ring
Analog penetration dial gauge (30 mm travel x 0.01 mm)
Adjustable dial gauge holder
CBR Penetration piston
Set of extension rods (2 pcs. 102 mm, 1 pcs. 305 mm and 1 pcs. 610 mm length)
Datum bar assembly with two stands
4.5 kg annular surcharge weight
4.5 Kg slotted surcharge weight
9 kg slotted surcharge weight
Vehicle bracket and wooden carrying case

The PRS-ZE0867 Conversion Frame is used to convert the IN-situ CBR test to a mechanical laboratory CBR test machine.

The system is easily assembled onto the conversion frame with the addition of some of the accessories included in PRS-ZE0865. The frame is used with the jack, load ring, CBR mould and penetration piston.

Product Code : Product Description

PRS-ZE0095 : Dynamic Cone Penetrometer (DCP)

STANDARDS :

The PRS-ZE0095 Dynamic Cone Penetrometer is used for the rapid, in situ measurement of structural properties of existing road pavement constructed with unbound materials.

it incorporates an 8 kg weight dropping through a height of 575 mm and 60° cone having a diameter of 20 mm. with the standard DCP measurements can be made down to a depth of approximately 850 mm or when extension shafts are used to a recommended maximum depth of 2 m.

Readings are usually taken after a set number of blows, changing the number according to the strength of the layer being penetrated. A typical test takes only a few minutes, therefore the instrument provides a very efficient method of obtaining information that would normally require the digging of test pits.

The penetration hammer assembly consists of 8 kg hammer, hammer shaft, anvil with plastic plate coupling for ruler and handle.

The Dynamic Cone Penetrometer is supplied complete with;
A hammer assembly,
Penetration rod,
2 piece 60° cone,
Metal plate coupling for ruler,
Segmented adaptor for extension rods,
Segmented upper extension rod,
Segmented lower extension rod,
2 piece 13-17mm AF spanners,
3mm AF hex wrench,
Tommy bar,
A bottle of adhesive,10cc,
Users Manual
Steel ruler,
Carrying Case, heavy-duty wooden

If you say, I canâ??t do without cocoa, this is for you. We mixed the high nutritional value of cashews, dates and grapes. And the delicious aroma of an orange â?¦ After work, after sports, when your motivation drops, do not hesitate to try our Cocoa Orange bar which will be fulfill your energy.

Fig with its E, C, A and B vitamins give vitality, energy and happiness. To keep you saturated long time, we added the walnut in it. Thus, we created a snack that is gluten-free, sugar-free and without additives. It is up to you to take a bite to eat to have a healthy meal.

We brought together Omega 3 and E vitamin rich walnut and fibrous-rich date palm. Can you imagine the taste of this combination? Our Date Palm and Walnut bar, which has already watered your mouth, allows you to have a healthy snack with natural ingredients.

We blended the protein rich raw hazelnuts with delicious apricots. We made our dazzling day dried fruit and hazelnut bar for you that you cannot believe how much calorie it contains. There is no need to wait much to try this taste that will boost your energy.

If healthy diet makes you feel good and feed your soul, you cannot say no to this taste prepared for you. The fibrous food source date-palm combined with the delicious taste of the cashew. You will always keep this bar besides you.

Light, light, lightâ?¦ these words were our focus. We took the magnesium-rich cashew and put it in the sweet date and added some grapes. We also gave a natural sour cherry aroma to feel that delicious taste in your palate. We couldnâ??t even believe this taste.

Product Code Product Description

PRS-AS0140/A Bitumen Oven for Rolling Thin-Film Oven Test (RTFOT), ASTM 220-240 V 50-60 Hz

PRS-AS0140/E Bitumen Oven for Rolling Thin-Film Oven Test (RTFOT), EN 220-240 V 50-60 Hz

PRS-AS0142 Spare Glass Container for PRS-AS0140

PRSGE-AS3572 Air-Drying Unit for PRS-AS0140

STANDARDS : EN 12607-1; ASTM D2872; AASHTO T240

PRS-AS0140 Bitumen Oven is used for determination of the resistance to hardening of semisolid asphaltic materials/ bitumen or bituminous binders under the combined effects of heat and air with the rolling thin-film oven test (RTFOT) method.

The Internal chamber of PRS-AS0140 Bitumen Oven is manufactured from stainless steel, insulated with fiberglass or similar, the door has a symmetrically located window.
The oven has a programmable temperature controller which works in PID mode and digital display system. A temperature sensor is used instead of the ASTM 13C thermometer. The temperature can be read from the digital unit placed on the oven. Over tempereture controlled by a mechanic switch. Conforming to the CE Directives.

Air Compressor and Air-Drying Unit (PRSGE-AS3572) should be ordered separately. Maximum pressure should not exceed 2 bar when an air compressor is used.

The Bitumen Oven for RTFOT is supplied complete with;

â?¢ Glass Comtainers, 8 pcs.

Dimensions 800x700x750 mm

Weight (approx.) 62 kg

Length is 09-12m
Shipment: Container base.
Min.order: 250 Mton
Sizes are 8mm up to 40mm.
Product origin : TURKEY
Supply Ability: 45000 Ton/Tons per Month
Grade: B420B, B420C, B500B, B500C,GR460B, GR60

Payment: letter of credit or forward sales are available according to the letter of guarantee.

Thanks and best regards.
MUSTAFA KEMAL TIMURHAN
SENIOR SELLER

Product Code Product Description

PRS-A0320 Grid Sieve Set (Flakiness Index Sieve Set EN)

PRS-A0321 Grid Sieve (Flakiness Index Sieve EN) 2.5 mm

PRS-A0322 Grid Sieve (Flakiness Index Sieve EN) 3.15 mm

PRS-A0323 Grid Sieve (Flakiness Index Sieve EN) 4 mm

PRS-A0324 Grid Sieve (Flakiness Index Sieve EN) 5 mm

PRS-A0325 Grid Sieve (Flakiness Index Sieve EN) 6.3 mm

PRS-A0326 Grid Sieve (Flakiness Index Sieve EN) 8 mm

PRS-A0327 Grid Sieve (Flakiness Index Sieve EN) 10 mm

PRS-A0328 Grid Sieve (Flakiness Index Sieve EN) 12.5 mm

PRS-A0329 Grid Sieve (Flakiness Index Sieve EN) 16 mm

PRS-A0330 Grid Sieve (Flakiness Index Sieve EN) 20 mm

PRS-A0331 Grid Sieve (Flakiness Index Sieve EN) 25 mm

PRS-A0332 Grid Sieve (Flakiness Index Sieve EN) 31.5 mm

PRS-A0333 Grid Sieve (Flakiness Index Sieve EN) 40 mm

PRS-A0334 Grid Sieve (Flakiness Index Sieve EN) 50 mm

STANDARDS :
It is used for the determination of the flakiness index of the aggregate.
Consisting of an electrostatically painted frame and 5 mm diameter stainless steel bars with apertures state below.
For sample preperation 4.5, 6.3, 8, 10, 12.5, 16, 20, 25, 31.5, 40, 50, 63, 80 and 100 mm aperture sizes test sieves should be ordered seperately.

Product Code Product Description

PRS-AS0120 Semi-Automatic Digital Bitumen Penetrometer 220-240 V 50-60 Hz

PRS-AS0120/110 Semi-Automatic Digital Bitumen Penetrometer 110 V 60 Hz

PRS-AS0121 Transfer Dish for PRS-AS0120

PRS-AS0122 Sample Cup, Ã? 55x35 mm, stainless steel

PRS-AS0123 Sample Cup, Ã? 70x45 mm, stainless steel

PRS-AS0124 Penetration Needle, 2,5 g

PRS-AS0160 One-Quarter Scale Cone and Shaft, ASTM D 1403 and D 1831, for PRS-AS0120 and PRS-AS0126

PRS-AS0161 One-Half Scale Cone and Shaft, ASTM D 1403 and D 1831, for PRS-AS0120 and PRS-AS0126

PRS-AS0162 Penetrometer Cone ASTM D 217 (Optional Type) and ASTM D 937, for PRS-AS0120 and PRS-AS0126, Brass

PRS-AS0165 Resilience Ball Penetration Tool. ASTM D5329, for PRS-AS0120 and PRS-AS0126

STANDARDS : EN 1426; ASTM D5; AASHTO T49
The PRS-AS0120 Semi-Automatic Digital Bitumen Penetrometer is used to determine the penetration of bituminous samples under constant load, time and temperature. The Penetrometer consists of a cast iron base with coarse and fine levelling screws, a digital penetration measurement gauge 0.01 mm readability and a penetration timer unit.
Start button of the penetration timer unit is used to release the plunger fitted with the needle to start the 5 seconds test.
A water bath (PRSGE-AS4000 or PRSGE-AS4050, 25±0,1 C) and a thermometer ( IP38, ASTM 17C or 63C ) required for the test should be ordered separately.


The Semi-Automatic Digital Bitumen Penetrometer is supplied complete with;
â?¢ Penetration Needle, 2,5g, 1 pieces
â?¢ Transfer Dish
â?¢ Sample Cup Ã? 55x35 mm, 3 pieces, stainless steel
Dimensions 200x300x500 mm
Weight (approx.) 16 kg

Product Code Product Description

PRS-AS0400 Ductility Testing Machine, 220-240 V 50-60 Hz

PRS-AS0420 Ductility Testing Machine with Cooling Unit, 220-240 V 50-60 Hz

PRS-AS0430 Force Ductility Testing Machine, EN 13589, 220-240 V 50-60 Hz

PRS-AS0402 Ductility Briquette Mould, ASTM D113 and AASHTO T51

PRS-AS0404 Ductility Mould Base Plate


PRS-AS0406 Ductility Mould, ASTM D6084, AASHTO T300 and EN13589 (force measurement ), Brass

PRS-AS0408 Ductility Mould, EN 13398

STANDARDS
PRS-AS0400 and PRS-AS0420 : EN 13398; ASTM D113, D6084; AASHTO T51
PRS-AS0430 : EN 13589, 13398, 13703; ASTM D113, D6084; AASHTO T51, AASHTO T300

The PRS-AS0400 Ductility Testing Machine is used to determine theductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min. It is designed for testing 4 specimens simultaneously. The Internal tank is made of stainless steel. The bath is fitted with an immersion heater in order to obtain (in normal conditions), the 25°C test temperature.

Each machine comprises speed control and water circulator to maintain the homogenous water temperature.

The PRS-AS0420 Ductility Testing Machine with Cooling Unit has the same specifications with PRS-AS0400 Ductility Testing Machine but with an additional cooling unit and It is not possible to convert PRS-AS0400 to PRS-AS0420 .

PRS-AS0430 Force Ductility Testing Machine has 4 loadcells. The accuracy of loadcells are ±0,1N with a maximum capacity of 300 N. The PRS-AS0430 has a cooling unit PRS-AS0430 model is equipped with TFT Graphic Display Automatic Control and Data Acquisition Unit. Failure condition can be down loaded to the Unit. Speed can be set and load-displacement curves are drawn through the software.
â?¢ Elongation measurement through motor encoder.
â?¢ 4 simultaneous load measurement with18 bit resolution.
â?¢ Speed contol with servo AC motor between 0,01 to 100 mm/min.
â?¢ Ethernet connection for computer interface.

Moulds and mould base plates should be ordered separately for all type machine.

Dimensions 300x1850x550 mm

Weight (approx.) 80 kg

Power 350 W

Product Code Product Description

PRS-KA0550 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 220-240 V 50-60 Hz

PRS-KA0550/110 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 110 V 60 Hz

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRS-B0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407

The PRS-KA0550 Automatic Pressure System is used to apply lateral pressure in the Hoek Cell during the triaxial testing of rock specimens. The power pack is equipped with a proportional valve to provide a sensitive control of the loading rate and to maintain a constant confining pressure to within 0.1 bar. Pressure is controlled by using the PID closed loop controlled electronics. The user can define the set lateral pressure and display the lateral pressure through the control and readout unit.
Control Uni is designed to control the power pack and processing of data from pressure transducers which is fitted to the power pack.
All the operations of Control Unit are controlled from the front panel consisting of a 800x480 pixel 65535 color resistive touch screen display and function keys 4 analogue channels are provided for loadcells, pressure transducers or displacement transducers.

It has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Its specimen setting sub-menu lists different specimen types including but not limited to cube, cylinder, block, beam, beam double upper bearers, cube splitting tensile, cylinder splitting tensile, paving block splitting tensile and kerb flexure. The Control Unit digital graphic display is able to draw real-time "Load vs. Time" or "Stress vs. Time" graphics.

The Control unit offers many addition unique features. You can save more than 10000 test results in its internal memory. Storage capacity can be increased up to 32 GB using SD memory cards or USB disk-drives. Control unit has support for various off-the-shelf USB printers, supporting both inkjet and laser printers. Control unit is equipped with a built-in internal camera which can save real-time video during testing for security purposes. Thanks to its built-in internet protocol suite, every aspect of control unit device can be controlled remotely from anywhere around the world. Last but not the least, It has support for Android tablets permitting to control and monitor your testing equipment remotely.

Biscuit, cholocate, cake, bar

Purified water packed in shape of ice cubes. You simply freeze it and use it. Hands-free production under high quality standards with automated processes.
Special packaging protects the purity of the water from open air, and thus from any bacteria.
Icequa ice-cubes do not change and affect the taste of your drinks in any way.
Icequa won t absorb other odors and leaves no residue like sediment which affect the flavor of ice. The water used in ice-cubes is purified using reverse osmosis filtration,
disinfected by ozone and removed from suspended solids.
Turn water into crystal clear ice.

We are manufacturing the poles used in lighting main roads, streets, parks, gardens in compliance with TS 914-ISO 9002 standards. Lighting poles are coated by at least 70 -80 micron galvanic in the zinc bath by hot-dipping method. We are carrying out our manufacturing as a result of static calculations by taking the height of the lighting poles, cantilever lengths, basic anchoring and the armatures installed above them into account.

Speed rate control: motor speed control unit
Load measure compression:450 bar press.Trans.
Load measure flexure: 250 bar pressuretransducer
Oil flow control : 24 v selenoid valve
Power : 220-240 v 1 ph 50 hz
Dimension: 600 x 600 x 1400 mm
Weight : 1350 kg.


Concrete, material testing equipment, test press

- FULLY-AUTOMATIC SPREADING

Specific to the automatic models with precise flow adjustment and specially designed spray-bar, perfect spreading can be made.

The system works by reading the data such as vehicle speed and spread width by providing instantaneous pump flow for the desired amount of spreading.

Spreading width can be increased or decreased during operation, the operator can accelerate or slow down according to the condition of the road, while the operator is focused on the driving system can start, maintain, and finish spreading.

- COMPLETE CONTROL FROM CABIN

Thanks to the specially designed control panel located in the operator's cab, the operator can get all functions such as circulation, automatic/manual spreading, intermediate pump feature, system cleaning, as well as controls such as pneumatic spray-bar locks, positions, paving width and spray bar movement of the spray bars.

- ASPHALT PUMP

The body of the asphalt pump is designed to remain in the tank so that freezing in the pump is prevented.

Thanks to the internal valves on the pump, the system performs all functions without the need for a complicated piping system.
Maintenance and cleaning are provided much more quickly and easily.

- PUMP FUNCTION

With a dedicated Asphalt Distributor Pump, critical functions can be performed with valves that are located both inside the pump and at the piping.
Pneumatic actuators can be controlled directly from the cabin.
Re-Suction
TankFilling
Tank Circulation
Automatic / Manual Spraying
Tank Discharge
Intermediate pump (allows the transfer of the material from one source to another without mixing with the material in the tank using the Distributor)
â?¢ System Cleaning

- SAFE & FAST HEATING

8 diameter 2 flame tubes are placed along with the tank in U format.
With 2 units of the electric burner, the material is heated quickly and efficiently.

- SOLID MECHANICAL JOINTS

The mechanical joints are important for the sealing and long-life use of the spray bar. Connectors used in the VAD Series asphalt Distributor allow the entire spray bar to be raised, lowered, or moved sideways.

- OPTIONAL THERMAL OIL SPRAY-BAR HEATING SYSTEM

The oil is heated by using the burners in the bitumen tank and transmitted to the spray bar.
This eliminates the risk of material cooling during and after the spreading.

- WORLDWIDE DELIVERY AND ONSITE INSTALLATION

VAD Series Asphalt Distributors are designed according to the request of our customers to be suitable for their own countriesâ?? new or second-hand trucks.
So, the high truck import expenses will be reduced.

VAD Series can be put pre-montaged into a 40ft container thanks to this design transportation costs are reduced significantly and it took only 5-7 days for the installation and training.

Product Specification
Oxygen Cylinder
Seamless Steel
Working Pressure: 230 ( bar )
Hydrolic Test Pressure: 345 ( bar )
Nominal Water Capacity: 50 lt
Length of Shell : Please define yours.
Weigth of Shell : Please define yours

Quantity

1 containers at first order. ( we expect, container loading: 250 pcs for each 20 ft container )
1 container each month.

Delivery and Pricing

CIF Istanbul & FOB prices.
Business Relation

U-box, “stainless steel” made, with inside smooth walls, foreseen of a flow obstacle, formed by vertical reinforcement bars.

Dimensions

We have agent of sel brands, semperit brands, alfagoma brands, hydrointer brands and manuli brands. At the same time we are manufactures and our hose factory in china. Our trade center is in turkey.

Our company is starting work 1977 years and everytimes thing to develop ourselfs. For the this reason we will add new big supliers in our group at the same time we will add big customers in our range. We believe this style working system, if we will develop our customers we will develop too.

Our company have 4 different big factories. 2 factories in china and other 2 factories in turkey. In turkey our factories about hydraulic fittings and machinery, in china factories about hydraulic hose and metal pipe. At the same time our another company about international trade and we will help to our all customers and we will suplly for our customers wanting in china market clearly with high quality.

Please you will contact with us by directly and we will start to our best work together.

With carton box after wood box

Corrosion protection is provided through hot dip galvanizing.

STANDARDS : EN 196-3,ASTM C187-C191,AASHTO T129-T131,BS 4550
Movements along X Y Z axes
Up to 30 different test types may be programmed and over 1000 tests may be memorized. PC Port
Initial and fi nal setting time (in 0.1 mm)
Automatic cleaning of the needle
Automatic stop and storage of measurements for up to 50 tests
Plunger for initial consistency
Thermostatic baths (optional)
Display for data input and diagram/test report
Printer for final test report and diagram
RS 232 serial port for PC connection
Moulds and further needles have to be ordered separately, according to the various standards
Power supply: 220 V, 50 Hz, single phase
Dimensions: 355 x 620 x 580 mm Weight: 40 kg.


Dimensions: 355 x 620 x 580 mm
Weight: 40 kg