Find Verified Potassium Hydroxide Suppliers, Manufacturers and Wholesalers

Potassium Sorbate is a chemical additive. It's widely used as a preservative in foods, drinks, and personal care products. It is an odorless and tasteless salt synthetically produced from sorbic acid and potassium hydroxide. ... Its safety and uses as a preservative have been researched for the last fifty years.

0-0-50

CAS.1310-58-3
1, used for electroplating, engraving, lithography, etc.
2, used as raw materials for potash salt production, such as , potassium carbonate, etc.
3, in the pharmaceutical industry, used in the production of potassium boronide, andioxolone, sarhepatol, testosterone propionate, progesterone, vanillin and so on.
4, in the light industry for the production of potash soap, alkaline battery, cosmetics (such as cold cream, snow cream and shampoo).
5, in the dye industry, used in the production of VAT dyes, such as VAT blue RSN, etc.
6, used as an absorbent for analysis reagent, saponification reagent, carbon dioxide and water.
7. In the textile industry, it is used for printing and dyeing, bleaching and mercerizing, and is widely used as the main raw material for the manufacture of man-made fibers and polyester fibers, as well as for the manufacture of melamine dyes.
8, also used for metallurgical heating agent and leather degreasing and other aspects.

1)tianqiu: l6f22
2)chemical system: zinc-manganese dioxide (potassium hydroxide electrolyte)
3)nominal voltage: 9v
4)nominal capacity: 1100mah
5)dimeension:25.5(l)*16.5(w)*47.5(h) mm
6)weight: 44g
7)service output:
Discharge conditions:load resistance 180o, daily period 24h/d, end point voltage
5.4v;
Minimum average duration:
Initial 11.5h
8)shelf life: three years after delivery under normal storage conditions
9)package:1pcs/card, 10pcs/box, 180pcs/ctn
Gross weight:9.8kg
Measurement:31*26*26.5 cm

Product description, Product introduction:
Quartz powder is white, it is made by grinding crushed quartz ore, and the main ingredient is SiO2 The Molecular weight of quartz is 70, mohs hardness is 7, and density is 2.65 g/cm3, melting point 1730�??. Quartz is used for friction materials in order to improve the friction coefficient and brake efficiency, reduce cost.
Quartz is applicable to car disc brake, drum brake pads, clutch and wet friction material. According to the performance requirement,The recommended regular consumption of quartz is from 2% to 8%.

The character of Feldspar:
Quartz is mainly refers to quartz sandstone, quartzite and vein quartz. Quartz crisp, no cleavage, conchoidal fracture, oily luster, milky white or colored translucent or other colors.Quartz chemical stability, resistance to high temperature, acid, slightly soluble in potassium hydroxide solution. Quartz belongs to the high hardness of the filler, ordinary sand is quartzite. friction industry used quartz powder is above 200 mesh, although it increase the friction effect, it also easy to cause obvious braking noise and scratches dual surface, therefore the quartz usage in the friction material industry is not much.

Property:
A1203: 0.19%
Si02: 99.5% min.
Fe203: 0.02% max.
CaO: 0.11%
MgO: 0.08%
grade:200mesh,325mesh
sieving rate: 97%

Aviation Kerosene Colonial Grade A1, also known as Jet A-1, is a high-quality fuel used primarily in aviation. It appears as a clear, bright liquid that is free from solid matter and undissolved water at ambient temperature. This fuel has a typical density ranging from 775 to 840 kilograms per cubic meter at 15�°C. It is designed to function effectively in extreme conditions, with a freezing point no higher than -47�°C and a flash point of at least 38�°C.

Jet A-1 is known for its specific energy, which is a minimum of 42.80 megajoules per kilogram, ensuring efficient performance. The sulfur content in this fuel is kept to a maximum of 0.30% by mass, and the aromatic content is limited to 25% by volume. Its viscosity is controlled to a maximum of 8,000 square millimeters per second at -20�°C, and it must have a smoke point of at least 25 millimeters. Additionally, the total acidity of Jet A-1 should not exceed 0.015 milligrams of potassium hydroxide per gram.

To enhance its performance and safety, Jet A-1 contains additives such as antioxidants and static dissipators. This aviation fuel meets the stringent international standards set by organizations like ASTM and IATA, making it a reliable choice for various aircraft, including commercial airliners, cargo planes, business jets, and military aircraft.

1 Summary


This specification defines the SUM for high Capacity Alkaline cells LR6 1.1 Type

IECLR6 OtherAAE914006 JISAM3

1.2 Reference standard

IEC 60086-1 --- Primary Batteries - Part 1: General

IEC 60086-2 --- Primary Batteries - Part 2: Physical and electrical specification

1.3 Execution standard GB/T 8897.2

2 Chemistry composition

Zinc ,EMD , Potassium hydroxide, Graphite
0.00% Mercury & Cadmium
3. Normal voltage1.5V
4. Average weight: 23.0g
5. Nominal Capacity
2500mAh (condition: 43 load resistance, discharge 4 hours per day at 20+/-2°C,

end-point voltage 0.9V )

6 Electrical performance


Test conditionLoad Resistance ( ±0.5%) 3.9©Time0.3s, Temperature20±2ã

O.C.V C.C.V Accept Level
V V

30 days after delivery 1.55 1.45
45 for 3 months 1.52 1.40 MIL-STD105E?¡AQL=0.4
Normal temperature for 12 Months 1.52 1.40

7 Service Life
Test condition: 20±2 and 60±15%RH
(Discharge Method) Minimum Average Duration
ITEM
Load Cutoff 30days 45 for 3 Normal Temperature
Time
Resistance VoltageV After delivery months for 12 Months


43© 4h/d 0.9 90h 81h 81h
3.9© 1h/d 0.8 390min 361min 361min

10© 1h/d 0.9 18.5h 17 h 17 h
(IEC ITEM)

1.8© 15sec/min 0.9 600 Cycles 540 Cycles 540 Cycles

250mA 1h/d 0.8 420min 380min 380min

3.9© 24h/d 0.9 350min 315min 315min
(REF ITEM)

Purity 90%
Appearance: white flakes
Package:25kg/bag, 1mt bag
Qingdao Keywill Chemical Technology Co., Ltd

Applications: used in battery industrial, soap industrial, high-class detergents industrial, Oil & Gas industrial, ABS resin industrialã??synthetic rubber industrial and cosmetics industrial;
Used as a important medicine intermediate, Pharmaceutical intermediate;
Used as important raw material of potassium chemical, Potassium salt, potash fertilizer, potassium fertilizer and dyestuff additives.

Aluminium Ingot
Aluminum ingot with high purity quality and low price
Aluminium Ingot
-Introduce: high purity aluminium ingot
Advantages
-Primary advantages
-Why should I buy?
low price aluminium ingot
China factory price aluminium ingot 99.7%
Hot sale Aluminum ingots purity 99.7% 99.85% 99.9% with good quality
-What makes this product different to ?
high purity
factory price
Hot sale
purity 99.7% 99.85% 99.9%
high purity aluminium ingot Main functions
-Key Features
Silver white light metal. It's malleable. Products are often made into rod, sheet, foil, powder, ribbon and silk. A layer of oxide film can be formed to prevent metal corrosion in humid air. When heated in the air, aluminum powder can burn violently and emit dazzling white flame. It is easy to dissolve in dilute sulfuric acid, nitric acid, hydrochloric acid, sodium hydroxide and potassium hydroxide solution, but difficult to dissolve in water. The relative density is 2.70. Melting point 660 . Boiling point 2327 . Aluminum is the third most abundant metal element in the earth's crust after oxygen and silicon. With the development of aviation, construction and automobile industries, the unique properties of aluminum and its alloys are required, which is greatly conducive to the production and application of this new metal aluminum. It is widely used.
Aluminium Ingot Use
Used for industry such as automobile,pinning and weaving,electron broadly and so on
The use of a substance depends to a great extent on its nature. Aluminum has a wide range of applications because of its many excellent properties.
Aluminum and its alloy are one of the most economical and applicable materials which are widely used at present. Since 1956, aluminum production in the world has exceeded copper production, ranking first in non-ferrous metals. We are aluminium ingot supplier
Aluminum ingot China Specifications
1, Aluminium ingot
2, high standard.
3, High quality.
4, Competitive price
Chemical composition: Al
Weight: 20 / 25kg
Al (Min): 99.9%, 99.85, 99.7%, 99.5%....
Place of Origin: China (Mainland)
Appearance: Silvery white
Bundling, 805mm * 180mm * 100mm / block    810mm * 810mm * 1020mm / bundle
Bundling, 810mm * 180mm * 100mm / block    810mm * 810mm * 1020mm / bundle
Composition and materials

Aluminum ingot with high purity quality and low price
Aluminium Ingot
-Introduce: high purity aluminium ingot
Advantages
-Primary advantages
-Why should I buy?
low price aluminium ingot
China factory price aluminium ingot 99.7%
Hot sale Aluminum ingots purity 99.7% 99.85% 99.9% with good quality
-What makes this product different to ?
high purity
factory price
Hot sale
purity 99.7% 99.85% 99.9%
high purity aluminium ingot Main functions
-Key Features
Silver white light metal. It's malleable. Products are often made into rod, sheet, foil, powder, ribbon and silk. A layer of oxide film can be formed to prevent metal corrosion in humid air. When heated in the air, aluminum powder can burn violently and emit dazzling white flame. It is easy to dissolve in dilute sulfuric acid, nitric acid, hydrochloric acid, sodium hydroxide and potassium hydroxide solution, but difficult to dissolve in water. The relative density is 2.70. Melting point 660 . Boiling point 2327 . Aluminum is the third most abundant metal element in the earth's crust after oxygen and silicon. With the development of aviation, construction and automobile industries, the unique properties of aluminum and its alloys are required, which is greatly conducive to the production and application of this new metal aluminum. It is widely used.
Aluminium Ingot Use
Used for industry such as automobile,pinning and weaving,electron broadly and so on
The use of a substance depends to a great extent on its nature. Aluminum has a wide range of applications because of its many excellent properties.
Aluminum and its alloy are one of the most economical and applicable materials which are widely used at present. Since 1956, aluminum production in the world has exceeded copper production, ranking first in non-ferrous metals. We are aluminium ingot supplier
Aluminum ingot China Specifications
1, Aluminium ingot
2, high standard.
3, High quality.
4, Competitive price
Chemical composition: Al
Weight: 20 / 25kg
Al (Min): 99.9%, 99.85, 99.7%, 99.5%....
Place of Origin: China (Mainland)
Appearance: Silvery white
Bundling, 805mm * 180mm * 100mm / block    810mm * 810mm * 1020mm / bundle
Bundling, 810mm * 180mm * 100mm / block    810mm * 810mm * 1020mm / bundle
Composition and materials
Grade Chemical  Composition %
AL>= Impurities

Potassium hydroxide

Color: white
Specific gravity at 20 deg. C: 1.5200
Solubility (gm/100 gm) at 20 deg. C: 63.0 at 35 deg. C: 71.6
Bulk density: 680 720 kg/m3.
Potassium cyanide (kcn): 98% min. (typically 99%)
Potassium hydroxide (koh): 0.5% max
Potassium carbonate (k2co3): 0.3% max
Potassium formate (hcook): 0.5% max
Potassium chloride as cl: 0.05% max
Water (h2o): 0.2% max
Water insolubles: 0.05% max
Polyethylene bags placed in m.S drum.


50kg steel drums

Component Grade
First-rate grade
Koh %>= 90.0
K2co3 % 0.50
Chloride (cl) % 0.01
Sulfate (so42-) % 0.005
Nitrate nitrite (n) % 0.0005
Phosphate (po4) % 0.005
Silica (sio3)% 0.01
Fe% 0.0005
Na % 1.0
Ca % 0.005
Al % 0.002
Ni % 0.001
Pb% 0.002

Usage:

Mainly used in alkaline batteries industry, soaps, high-class detergents and cosmetics industry, medicine intermediate, potassium chemicals, synthetic ruber, abs resin, food additive dyestuffs and so on.


Packing: 25kg , 50kg , 1000kg plastic woven bag of each or as per customers requirement.

CAS NO : 299-27-4
Packing specification : 25kg/bag or drum
User : Nutritional supplements, chelating agents, yeast feed.
Introduction This product is made by neutralizing potassium hydroxide and gluconic acid, and has granular or powder specifications.

Nickel hydroxide

As a trading corporation specialized in exporting of all kinds of battery pack, batteries and battery raw materials, we sincerely hope to build a long-term cooperant relationship with your company.
Battery raw materials:
For lithium -ion battery:
Lithium iron phosphate, lithium cobalt oxide, lithium nickel-cobalt oxide, lithium manganese oxide, graphite, acetylene black, etc.
For ni-mh battery:
Nickel hydroxide, hydrogen storage alloy, cobalt monoxide.
For ni-cd battery:
Nickel hydroxide, cadmium oxide, nickel sulphate.
For ni-zn battery:
Nickel hydroxide, zinc powder, zinc chloride.
For carbon zinc battery
Emd, zinc powder, cmd, acmd, ammonium chloride, active carbon.
Common chemicals:
Many kinds of raw chemicals of acid, alkali, salt like potassium perchlorate, potassium hydroxide, ammonium chloride, active carbon, molybdenum powder and so on.
All supplieres with which we cooperate are all iso certified, so you get our guarantee of quality and service.
We hope to cooperate with you, by doing this both of us become more profitable.


Upto client and type

Carbazole

Molecular Formula: C12H9N

CAS NO. :86-74-8 EINECS: 201-696-0 UN: UN 2811 6.1/PG 3

Main application:

Used in the manufacture of dyes, chemical reagents, explosives, insecticides, lubricants, rubber antioxidants, etc. Used as an analytical reagent and also for organic synthesis.

Physicochemical properties:

Appearance: White crystal or light brown powder

Purity: 98%

Refractive index: 1.767

Stability: Stable. Combustible. Incompatible with strong oxidizing agents, nitrogen oxides, potassium hydroxide.

Vapor pressure: 400 mm Hg at 323°C

Storage condition: The warehouse is ventilated at low temperature and is stored separately from the oxidant.

Flash point: 220 °C

Melting point: 243-246 °C(lit.)

Density: 1.1 g/cm3

Boiling point: 355 °C (lit.)

* ABOUT HA LATEX:
Natural rubber is produced from plants and is classified as a polymer chemical compound with large molecules made of many smaller molecules of the same kind. Some polymers exist naturally and others are produced in laboratories and factories .. A polymer is a chemical compound with large molecules made of many smaller molecules of the same kind. Some polymers exist naturally and others are produced in laboratories and factories.

Natural rubber is one of the most important polymers for human society. Natural rubber is an essential raw material used in the creation of more than 40,000 products. It is used in medical devices, surgical gloves, aircraft and car tires, pacifiers, clothes, toys, etc. Natural rubber is obtained from latex whitish milky fluid containing proteins, starch, alkaloids, etc., that is produced by many plants. In some plants it also contains rubber., A milky liquid present in either the latex vessels (ducts) or in the cells of rubber-producing plants
* SPECIFICATIONS:
Total Solids content (TSC) % (m/m): 61.0 Min
Dry Ruber content (DRC) % (m/m): 60.0 Min
Non Rubber Solids % (m/m): 1.7 Max
Alkalinity (NH3): 0.60 Min
Potassium Hydroxide number (KOH.No): 0.70 Max
Mechanical Stability Time (MST): 650 Min
Volatile Fatty Acid (VFA. No): 0.06 Max
pH Value: >10
Coagulam content max % (m/m): 0.03

Potassium HYdroxide pellets

White crystals precipitated from
water, with two crystal water. Slightly bitter taste, non-toxic, soluble in water, slightly soluble in cold water, acidic aqueous solution, can be dissolved in an aqueous solution of potassium hydroxide and sodium hydroxide, organic solvent insoluble in cold alcohol, ether, benzene and the like. Formula C3H3N3O3, the presence of two isomers, namely keto and enol structure, usually a mixture of two isomers.

A demulsifier is a surfactant that breaks up an emulsion. The demulsifier mainly destroys the emulsion by partially replacing the role of the stable film. Used as a dehydrating agent, it can remove the water in crude oil and heavy oil, so that the water content can meet the requirements; it can reduce the viscosity of crude oil when used in oil wells, so that the oil wells will not be blocked. It is obtained by polymerization of fatty alcohol, propylene oxide and ethylene oxide. Soluble in water, light yellow or milky white viscous liquid. Soap smell. Freezing point 25 ~ 40 ºC. Hydroxyl value 60 mg potassium hydroxide/g. , the aqueous solution is milky white.