Find Verified Temperature Controllers Indicators Suppliers, Manufacturers and Wholesalers

The tissue adhesive Histoacryl consists of monomeric n-butyl-2-cyanoacrylate, which polymerises quickly in connection with tissue fluid. Histoacryl is available in two colours: translucent, special for facial application, and blue, which enables an easy control over the quantity applied in different indications approved

Product Code Product Description

PRS-CM1462 Muffle Furnace 5 lt. 1200°C Max. Temperature with Programmable Timer, 20-240 V 50-60 Hz

STANDARDS : EN 196-2; ASTM C25, C115

PRS-CM1462 Muffle Furnace is used for determining the loss on ignition and insoluble residue of cement and building lime.

Working temprature and time can be programmed with PID digital control system.

Digital Thermometer Features

Temperature Controller PC 442/2

Max. Temperature 1200 °C

Max. Continuous Temperature 1150 °C

Temperature Deviation at Set Point ± 2°C

Heat Up Time to Max. Temperature 50. min

Internal Volume 5 L

Phase 1

Internal Dimension 140x180x200 mm

External Dimension 650x550x580 mm

Weight (approx.) 56 kg

Power 2000 W

PRS-B0980 Accelerated Curing Tank, Ambient to +60°C, 380 V 50 Hz

PRS-B0980 Accelerated Curing Tank is designed for curing concrete specimens according to ASTM C1768 (Procedure A - Warm Water Method) and BS 1881:Part 112 (35°C Method and 55°C Method).

The Tank consists of an insulated rectangular double walled metal chamber inside lined with stainless steel outer powder coated, an insulated lid with lifting handle to cover the chamber and an stainless steel perforated platform for circulation of water and to support the concrete specimes The tank also has a circulation pomp. to provide the same water temperature at any point within the tank.

The tank works ambient to +60°C temperature. The temperature is controlled with closed loop PID controlled digital thermoregulator with accuracy of ±2°C. Curing temperature and curing time can also be set.

PRSD -1440 : Freezing and Thawing Chamber 285 L, 220-240 V 50-60 Hz

STANDARDS : , 13450; CEN/TS 12390-9
Used for the determination of resistance to freezing and thawing by providing freezing / thawing in air.
The chamber is equipped with a user defined program including 10 steps. Time can be adjusted to 999 minutes for each step of the program. The temperature range of the cabinet is -30°C to +30°C.
The temperature is controlled by a sensor which can be immersed either into the sample, into the water which the sample is placed into or, into the salty water solution placed on the sample before starting the test.

The calibration of the sensor is carried out using the user friendly menu.The distribution of temperature in the cabinet is performed using an integral fan.

Software for data transfer to a computer is supplied complete with the cabinet, and data can be monitored during the tests. Data can be converted to an excel report or to a graph.

The condenser of the cabinet is fitted with an air cooled hermetic cooler. The gas used for the cooler does not include CFCâ??s.

The control unit is electronic and equipped with digital display with 0.1°C temperature resolution. The temperature distribution accuracy in the cabinet is not higher than 2°C.
The user can preset the time of each ramp and the number of each set by using the control unit.

Internal Dimensions : 500x500x900 mm
External Dimensions : 680x650x1980 mm
Weight (approx.) : 140 kg
Power : 1800 W

Product Code Product Description

PRS-CM0100 Curing Cabinet 750 L, 220-240 V 50-60 Hz

STANDARDS : EN 196-1; ISO 679

The PRS-CM0100 Curing Cabinet is used for curing of cement, concrete cubes or other mortar specimens. It can be used for curing cement specimens within the mould, or after removing from the mould.

The curing cabinet provides 20 ± 1°C temp. and over 95% RH humidity for cement specimens. Internal chamber and racks are made of stainless steel. The temperature is maintained at 20 ± 1°C by a immersion heater and refrigerator unit which are supplied complete with cabinet. The cabinet is equipped with a digital control unit which controls and monitors the temperature.

The humidity is maintained from 95% to saturation by water nebulizers and is also monitored on the digital control unit.

Internal Dimension 900x700x1350 mm
External Dimension 1100x1000x2200 mm
Weight (approx.) 150 kg
Power 1200 W

Structure Size : 160
Rated Power : 1.25 - 6 kW
Pole Number : 16 - 4
Protection Class : IP23
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : A4 - B3 - B9
Mechanical Structure : Body cast iron
Cooling Type : IC 410 (Cooling by forced cooling fan)
Insulation Class : F (Contact us for different insulation classes.)
Working Regime : S3 - S5
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : On request, a thermistor can be installed and a motor protection relay can be provided.

GENERAL CHARACTERISTICS
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
Belt pulley driven.
Maximum power and minimum maintenance with the poly-V belt pulley drive.
PLC control unit.
Star triangulation starter system.
Radiator with tropical type of air- oil combination.
Provide excellent cooling at high temperatures and are long lasting.
Absorption valve providing high energy efficiency.
Thermostatic valve which secures the operation of the compressor always always at the optimum temperature and prevents the condensation of the air inside the system.
Two- stage air absorption filter system.
Acoustic cabin with sound isolation.
Fully equipped security system.

Product Code Product Description

PRS-A0806 Microlance Instant Moisture and Temperature Tester

PRS-A0806 MICROLANCE Instant Moisture and Temperature Tester is used for the instant on-site determination of moisture and temperature of sands, aggregates, building materials, minerals and mixes from small quantities to hundreds of tons.

The instrument is reliable and easy to use, taking moisture readings up to 1 meter depth by simply inserting the lance into the test material. Instant readings are monitored on the digital display and the built-in computer allows the user to monitor a wide range of materials and water contents.

PRS-A0806 Microlance is supplied with standard calibration values for sands and aggregates but it can also be calibrated for different material or mixture with the Autocal functionality. The unit is supplied complete with a calibration certificate.

Range Resolution Accuracy
Moisture 0 to 25 % 0.1 % better than 0.5 %
Tempature -20 to 60°C 0.1 °C better than 0.5 °C

Moisture measurement with temperature compensated electric field
Temperature measurement according to BS 1904 and DIN 751
Platinum resistance detector
Works with 4 x 1.5 V AA cells (or equivalent)

Dimensions 100x100x1200 mm

Weight (approx.) 2 kg

Product Code Product Description

PRS-AS0140/A Bitumen Oven for Rolling Thin-Film Oven Test (RTFOT), ASTM 220-240 V 50-60 Hz

PRS-AS0140/E Bitumen Oven for Rolling Thin-Film Oven Test (RTFOT), EN 220-240 V 50-60 Hz

PRS-AS0142 Spare Glass Container for PRS-AS0140

PRSGE-AS3572 Air-Drying Unit for PRS-AS0140

STANDARDS : EN 12607-1; ASTM D2872; AASHTO T240

PRS-AS0140 Bitumen Oven is used for determination of the resistance to hardening of semisolid asphaltic materials/ bitumen or bituminous binders under the combined effects of heat and air with the rolling thin-film oven test (RTFOT) method.

The Internal chamber of PRS-AS0140 Bitumen Oven is manufactured from stainless steel, insulated with fiberglass or similar, the door has a symmetrically located window.
The oven has a programmable temperature controller which works in PID mode and digital display system. A temperature sensor is used instead of the ASTM 13C thermometer. The temperature can be read from the digital unit placed on the oven. Over tempereture controlled by a mechanic switch. Conforming to the CE Directives.

Air Compressor and Air-Drying Unit (PRSGE-AS3572) should be ordered separately. Maximum pressure should not exceed 2 bar when an air compressor is used.

The Bitumen Oven for RTFOT is supplied complete with;

â?¢ Glass Comtainers, 8 pcs.

Dimensions 800x700x750 mm

Weight (approx.) 62 kg

Product Code Product Description

PRSD-1450 Muffle Furnace 3 lt. 1000°C, 220-240 V 50-60 Hz

PRSD-1455 Muffle Furnace 6 lt. 1100°C, 220-240 V 50-60 Hz

PRSD-1460 Muffle Furnace 5 lt. 1200°C, 220-240 V 50-60 Hz

PRSD-1462 Muffle Furnace 5 lt. 1200°C Programmable Timer, 220-240 V 50-60 Hz

PRSD-1465 Muffle Furnace 5 lt. 1600°C, 380 V 50 Hz

The PRSD Series Muffle Furnaces are widely used for determining various properties of construction materials, and they cover a temperature range from 1100°C to 1600°C, they are all front loading for easy operation and are of a double skin construction to maintain a cool outer case. Up to 1300°C, open wire based models are also produced.

Excellent temperature control is provided by a PID digital control system. A vertical counter balanced door keeps the hot insulation away from the operator which opens in an upward movement. The Furnace has a safety switch which isolates the power when the door is opened.

Highest efficiency level.
Lowest energy consumption for applications with need for continuous air flow.
Long lived operation system provided by reciprocal coupling.
Efficient transfer system due to elastic coupling
GENERAL CHARACTERISTICS
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
Direct coupling drive.
Silent and vibration free operation due to polyurethane coupling.
One- to- one (1:1) direct coupling.
Star triangulation starter system.
PLC control unit
Radiator with tropical type of air- oil combination. Provide excellent cooling at high temperatures and are long lasting.
Absorption valve providing high energy efficiency. Thermostatic valve which secures the operation of the compressor always always at the optimum temperature and prevents the condensation of the air inside the system.
Two- stage air absorption filter system.
Acoustic cabin with sound isolation.
Fully equipped security system.

1. Specially designed for measuring the body temperature, with a dynamic offset for the ambient temperature and body temperature.
2. Exclusively using the infrared probe for temperature measurement, with high accuracy of measurement and a more stable performance.
3. Providing the function of sound notification of higher body temperature.
4. Providing the function of sound notification of higher body temperature.
5. Capable of storing 32 sets of measurement data.
6. 3 colors backlight LCD digital display (Red, Orange, Green)
7. Providing two temperature modes, i.e Fahrenheit scale and Celsius scale, for selection.
8. Providing the function of auto shutdown to save electric power.
9.Small size, reasonable structure and convenient operation.
10.Selecting the body temperature measurement mode to measure the temperature of any object with its temperature less than 100'C
and its emissivity equal to 0.95.

Product Code Product Description

PRS-B1050 Melting Pot 3 lt. Capacity, 220-240 V 50-60 Hz

PRS-B1050/110 Melting Pot 3 lt. Capacity, 110 V 60 Hz


The PRS-B1050 melting pot is used for melting the capping compound. The apparatus consists of a 3 litre capacity aluminium container in a well-lagged steel jacket, cover and thermostatic control heating system to keep the temperature constant in the range of ambient to 200 ºC.

Dimensions350x320x290 mm
Weight (approx.)9 kg
Power600 W

Structure Size : 90 - 355
Rated Power : 0.55 - 400 kW
Pole Number : 2 - 4 - 6 - 8 -10 - 12 - 16
Protection Class : IP55 (up to 280 types), IP65 (315 types and above) (Contact us for higher protection classes.)
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : B3 (Contact us for different structure types.)
Mechanical Structure : Body and covers are cast iron, legs are ductile iron
Cooling Type : IC 411 (Contact us for different cooling types and for forced cooling.)
Insulation Class : F / H (Contact us for different insulation classes.)
Working Regime : S1 (Contact us for S2..S10 operating regimes.)
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)

Structure Size : 90 - 200 (Contact us for different types of needs.)
Rated Power : 0.55 - 30 kW
Pole Number : 2 - 4 - 6 - 8 -10 - 12 - 16
Protection Class : IP55 (Contact us for higher protection classes.)
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : B3 (Contact us for different structure types.)
Mechanical Structure : Body and covers are cast iron, Legs are ductile iron.
Cooling Type : IC 411 (Contact us for different cooling types and for forced cooling.)
Insulation Class : F (Contact us for different insulation classes.)
Working Regime : S1 (Contact us for S2..S10 operating regimes.)
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)

Structure Size : 225 - 355
Rated Power : 45 - 315 kW
Pole Number : 2 - 4
Protection Class : IP23
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : B3 (Contact us for different structure types.)
Mechanical Structure : Body and covers are cast iron, legs are ductile iron
Cooling Type : It is supplied by the air that the propeller at the back of the engine circulates inside the body. (Internal Cooling)
Insulation Class : F / H
Working Regime : S1
Ambient temperature : 40 C
Motor Protection : Thermistor and Motor Protection Relay

Freezing and Thawing Chamber

Product Code Product Description

PRSD-1440 Freezing and Thawing Chamber 285 L, 220-240 V 50-60 Hz

STANDARDS : EN 1338, 1339, 1340, 1367-1, 1367-6, 12371, 13748-2, 13450; CEN/TS 12390-9

It is used for the determination of resistance to freezing and thawing by providing freezing / thawing in air. The chamber is equipped with a user defined program including 10 steps. Time can be adjusted to 999 minutes for each step of the program. The temperature range of the cabinet is -30°C to +30°C.

The temperature is controlled by a sensor which can be immersed either into the sample, into the water which the sample is placed into or, into the salty water solution placed on the sample before starting the test. The calibration of the sensor is carried out using the user friendly menu.

The cabinet provides maximum cooling 5A°C/hour and maximum heating 10°C/hour. The distribution of temperature in the cabinet is performed using the integral fan. Software for data transfer to a computer is supplied complete with the cabinet, and data can be monitored during the tests. Data can be converted to an excel report or to a graph.

The condenser of the cabinet is fitted with an air cooled hermetic cooler. The gas used for the cooler does not include CFCâ??s.

Internal Dimensions 490x530x1100 mm

External Dimensions 690x860x1940 mm

Weight (approx.) 225 kg

Power 1800 W

Acetoxy base moisture curing and temperature resistance up to 300 C suitable for oven doors, hotplates, heating systems and joints where high temperature resistance is necessary. Temperature resistance up to 300 C. High adhesion. Solvent free. %100 silicone.

Product Code : Product Description

PRS-B0950 Large Metal Curing Tank

PRS-B0952 Set of Removable Upper Racks for PRS-B0950

PRS-B0954/NCuring Tank Heater for PRS-B0950 and PRS-B0965, 220-240 V 50-60 Hz (3 cm connecting channel and 50 cm resistance length)

PRS-B0955 Circulating Pump, 220-240 V 50-60 Hz

PRS-B0960 Large Plastic Curing Tank

PRS-B0962 Wide Plastic Curing Tank

PRS-B0956 Curing Tank Heater for PRS-B0960 and PRS-B0962 , 220-240 V 50-60 Hz (6,5 cm connecting channel and 70 cm resistance length)

(If 110V required please indicate on your order)

The PRS-B0950 steel, PRS-B0960 and PRS-B0962 Plastic Curing Tanks are designed for curing concrete cubes and cylinders. The temperature can be adjusted and can be kept constant by an electric resistance incorporating a digital thermo regulator which maintains the set temperature between ambient to 40 ºC with ± 2 ºC accuracy.

The PRS-B0950 is manufactured from powder coated sheet steel. Suitable upper racks to hold concrete cubes are available on request (max. 8 pieces). PRS-B0960 and PRS-B0962 tanks have a bearer metal carcass.

The PRS-B0952 should be ordered separately.

All Curing Tanks are supplied complete with;

Heater

Submersible Circulation Pump

Base Metal Racks

Structure Size : 90 - 355
Rated Power : 0.37 / 1.66 30/37 kW
Pole Number : 16 / 4-12 / 4-16 / 6-8 / 4-6 / 4-12 / 6-16 / 2-4 / 2
Protection Class : IP55 (up to 280 types), IP65 (315 types and above) (Contact us for higher protection classes.)
Voltage : 380 V (Contact us for different voltages.)
Frequency : 50 Hz (Contact us for different frequencies and speed control devices.)
Build Type : B3 (Contact us for different structure types.)
Mechanical Structure : Body and covers are cast iron, legs are ductile iron
Cooling Type : IC 411 (Contact us for different cooling types and for forced cooling.)
Insulation Class : F / H (Contact us for different insulation classes.)
Working Regime : S1 (Contact us for S2..S10 operating regimes.)
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)

Tank top Screw Type Compressors
Compact design, advanced technology
High quality, dry air due to integrated dryer
Highest performance level with the most convenient investment cost
Affordable service cost and maintenance easiness
Uninterrupted production with high quality air
Easy installation and minimum fixing cost
Low noise level & silent operation
GENERAL CHARACTERISTICS
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
High efficiency and energy saving screw block.
Electrical motors with the standard of high efficiency.
Belt pulley driven.
Maximum power and minimum maintenance with the poly-V belt pulley drive.
PLC control unit.
Star triangulation starter system.
Radiator with tropical type of air- oil combination.
Provide excellent cooling at high temperatures and are long lasting.
Absorption valve providing high energy efficiency.
Thermostatic valve which secures the operation of the compressor always always at the optimum temperature and prevents the condensation of the air inside the system.
Two- stage air absorption filter system.
Acoustic cabin with sound isolation.
Fully equipped security system.

3D infinity mirror
16 million color options
mobile control
touch control
sound and music sensitive easy installation

Product Code Product Description

PRS-ZE0235 Linear Shrinkage Mould

STANDARDS : BS 1377:2
The PRS-ZE0235 , Linear Shrinkage Mould is 140 mm long and 12.5mm radius and is used for the determination of the total linear shrinkage of soils, and indicates the plastic properties of soils with low clay content.

Dimesions 140x140x13 mm
Weight (approx.) 0,3 kg

Product Code Product Description

PRS-CM00020 High Pressure Cement Autoclave, 230 V 50-60 Hz

STANDARDS : ASTM C151, C490; UNE 7207

The PRS-CM00020 High Pressure Cement Autoclave is designed to perform expansion tests on cement specimens.10 specimens can simultaneously be tested in the high pressure steam vessel of 154 mm diameter and 430 mm height.

The Autoclave consists of a pressure gauge, pressure regulator, temperature regülatör, control switches and safety valve.

PRS-CM0033 Two Gang Shrinkage mould should be ordered separately.

The High Pressure Cement Autoclave is supplied complete with;
Specimen Rack, 10 samples capacity

Dimensions 450x475x1080 mm
Weight (approx.) 55 kg
Power 2600 W

Melting Pot

Product Code Product Description

PRS-B1050 Melting Pot 3 lt. Capacity, 220-240 V 50-60 Hz

PRS-B1050/110 Melting Pot 3 lt. Capacity, 110 V 60 Hz

STANDARDS : EN 12390â??3, 12390-1, 12504-1; ASTM C31, C192, C617, C39, C42; AASTHO T23, T126

The PRS-B1050 melting pot is used for melting the capping compound. The apparatus consists of a 3 litre capacity aluminium container in a well-lagged steel jacket, cover and thermostatic control heating system to keep the temperature constant in the range of ambient to 200 ºC.

Dimensions 350x320x290 mm
Weight (approx.) 9 kg
Power 600 W

Digital Hot Plates

Product Code Product Description

PRSD-1400 Digital Hot Plate 300x300 mm, 220-240 V 50-60 Hz

PRSD-1402 Digital Hot Plate 350x450 mm, 220-240 V 50-60 Hz

PRSD-1403 Digital Hot Plate 400x600 mm, 220-240 V 50-60 Hz

PRSD-1405 Hot Plate Ã? 170 mm 220-240 V 50-60 Hz

PRSD-1410 Digital Hot Plate with Magnetic Stirrer 220-240 V 50-60 Hz


Product Code PRSD-1400 PRSD-1402 PRSD-1403

Temperature Range Ambient to 350OC

Control System Digital Thermostat

Temperature Sensivity ± 2 OC

Plate Dimensions 300x300 mm 300x450 mm 400x600 mm

External Chamber Electrostatic Powder Paint, Steel


Product Code PRSD-1405

Plate Dimensions 170 mm

Hot Plate Type Sanding Plate

External Chamber Electrostatic Powder Paint, Steel

Product Code PRSD-1410

Temperature Range Ambient to 300OC

Stirring Speed 100-2000 r.p.m.

Stirring Capacity 5000 ml

Plate Dimensions 190x190 mm

External Chamber Electrostatic Powder Paint, Steel

Product Code Dimension Weight (approx.) Power

PRSD-1400 300x300x250 mm 3.5 kg 1200 W

PRSD-1402 350x450x250 mm 5.5 kg 1800 W

PRSD-1403 400x600x250 mm 7.5 kg 3000 W

PRSD-1405 300x300x200 mm 2.5 kg 1500 W

PRSD-1410 210x310x100 mm 2.8 kg 600 W

Product Code Product Description

PRS-ASKW00126 Kinematic Viscosity Apparatus

STANDARDS : ASTM 2170,AASHTO T201,EN 12595
The temperature, from room temperature to 135°C, remains constant within ± 0.1°C. Electric stirrer, electric heater and cooling (COIL) system. Digital read-out and regulation of temperature. Safety device for temperature and water level with alarms. 19 litre bath in pyrex glass with external protection in plexiglass. Support base with housing seats.
Capacity: Five viscometers to be ordered separately according to viscosity.

Dimensions 300 x 300 x 500 (h) mm.
Power supply 220 V, 50 Hz, single phase, 1700 Watts
Weight 12 kg.

Product Code Product Description

PRS-KA0550 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 220-240 V 50-60 Hz

PRS-KA0550/110 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 110 V 60 Hz

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRS-B0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407

The PRS-KA0550 Automatic Pressure System is used to apply lateral pressure in the Hoek Cell during the triaxial testing of rock specimens. The power pack is equipped with a proportional valve to provide a sensitive control of the loading rate and to maintain a constant confining pressure to within 0.1 bar. Pressure is controlled by using the PID closed loop controlled electronics. The user can define the set lateral pressure and display the lateral pressure through the control and readout unit.
Control Uni is designed to control the power pack and processing of data from pressure transducers which is fitted to the power pack.
All the operations of Control Unit are controlled from the front panel consisting of a 800x480 pixel 65535 color resistive touch screen display and function keys 4 analogue channels are provided for loadcells, pressure transducers or displacement transducers.

It has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Its specimen setting sub-menu lists different specimen types including but not limited to cube, cylinder, block, beam, beam double upper bearers, cube splitting tensile, cylinder splitting tensile, paving block splitting tensile and kerb flexure. The Control Unit digital graphic display is able to draw real-time "Load vs. Time" or "Stress vs. Time" graphics.

The Control unit offers many addition unique features. You can save more than 10000 test results in its internal memory. Storage capacity can be increased up to 32 GB using SD memory cards or USB disk-drives. Control unit has support for various off-the-shelf USB printers, supporting both inkjet and laser printers. Control unit is equipped with a built-in internal camera which can save real-time video during testing for security purposes. Thanks to its built-in internet protocol suite, every aspect of control unit device can be controlled remotely from anywhere around the world. Last but not the least, It has support for Android tablets permitting to control and monitor your testing equipment remotely.

Laminar Flows

Product Code Product Description

PRS-KU1480 Laminar Flow (Fume Hood) Over the Counter Type

PRS-KU1482 Laminar Flow (Fume Hood) - Cabinet Type

STANDARDS

Some tests, especially extraction methods, require the use of volatile toxic chemicals which are hazardous to health, and these gases are subject to occupational exposure limits as described in relevant legislation and regulations

The PRS-KU1480 and PRS-KU1482 , Over The Counter and Cabinet Type Fume Hoods are especially designed to remove toxic gases from the test area. Bespoke Fume Hoods with specific dimensions and properties can be supplied to meet specific requirements, pleasecontact PARSROS for more information.

Standard Features

Stoneware Bench

Water and gas fittings

2 x double Electric Socket, 220 V

Galvanized frame

Legs that made from hard PVC to be protected against corrosion,

Second air drained part for draining heavy gases,

Standard flammable gas tap for LPG, Acetylene, Propane, Butaneâ?¦etc,

Pressure Reducing Regulator,

Laminated or Tampered glass

Optional Features

Digital Indicator and control panel ,

Fan min. 1200 m3/h capacity

Trespa Top Lab Plus or Epoxy Resin type bench surface,

Demineralized water fitting

Product Code Dimensions Weigth(approx.)

PRS-KU1480 1500x900x1620 mm 250 kg

PRS-KU1482 1500x900x2350 mm 300 kg

Product Code Product Description

PRS-AS0400 Ductility Testing Machine, 220-240 V 50-60 Hz

PRS-AS0420 Ductility Testing Machine with Cooling Unit, 220-240 V 50-60 Hz

PRS-AS0430 Force Ductility Testing Machine, EN 13589, 220-240 V 50-60 Hz

PRS-AS0402 Ductility Briquette Mould, ASTM D113 and AASHTO T51

PRS-AS0404 Ductility Mould Base Plate


PRS-AS0406 Ductility Mould, ASTM D6084, AASHTO T300 and EN13589 (force measurement ), Brass

PRS-AS0408 Ductility Mould, EN 13398

STANDARDS
PRS-AS0400 and PRS-AS0420 : EN 13398; ASTM D113, D6084; AASHTO T51
PRS-AS0430 : EN 13589, 13398, 13703; ASTM D113, D6084; AASHTO T51, AASHTO T300

The PRS-AS0400 Ductility Testing Machine is used to determine theductility of bituminous materials in a briquette mould by measuring the breaking elongation at a constant speed of 50 mm/min. It is designed for testing 4 specimens simultaneously. The Internal tank is made of stainless steel. The bath is fitted with an immersion heater in order to obtain (in normal conditions), the 25°C test temperature.

Each machine comprises speed control and water circulator to maintain the homogenous water temperature.

The PRS-AS0420 Ductility Testing Machine with Cooling Unit has the same specifications with PRS-AS0400 Ductility Testing Machine but with an additional cooling unit and It is not possible to convert PRS-AS0400 to PRS-AS0420 .

PRS-AS0430 Force Ductility Testing Machine has 4 loadcells. The accuracy of loadcells are ±0,1N with a maximum capacity of 300 N. The PRS-AS0430 has a cooling unit PRS-AS0430 model is equipped with TFT Graphic Display Automatic Control and Data Acquisition Unit. Failure condition can be down loaded to the Unit. Speed can be set and load-displacement curves are drawn through the software.
â?¢ Elongation measurement through motor encoder.
â?¢ 4 simultaneous load measurement with18 bit resolution.
â?¢ Speed contol with servo AC motor between 0,01 to 100 mm/min.
â?¢ Ethernet connection for computer interface.

Moulds and mould base plates should be ordered separately for all type machine.

Dimensions 300x1850x550 mm

Weight (approx.) 80 kg

Power 350 W

Structure Size : 132-315
Rated Power : 2.2-160 kW
Pole Number : 4 - 6 - 8
Protection Class : IP55
Voltage : 380 V
Frequency : 50 Hz
Build Type : B3 - B5 - B3 / B5
Mechanical Structure : Body and covers are cast iron, legs are ductile iron
Cooling Type : IC 411
Insulation Class : A - E - B - F - H
Working Regime : S3- 100-60-40-25%
Ambient temperature : 40 C (Contact us for higher ambient temperatures.)
Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)

Product Code Product Description

PRS-ZE0000-02 Direct Shear Test Machine ( Digital )

STANDARDS : TS 1900-2,ASTM D3080,BS 1377-7,AASHTO T236,NF P094 071-1/2

The System is capable of performing the consolidation and shearing phases of a standard direct shear and residual shear test under full automatic control.

The system consists of a computer-controlled unit that utilizes micro-stepper motors to apply the vertical and horizontal loads to the soil specimen. The system is capable of doing a consolidation process at 32 phase automatically.

Horizontal shearing can be applied at a specified rate of deformation or at a specified rate of horizontal force change, or at a specified set of force steps of a specified duration.
The system is capable of displaying the current status of a test and graphically portraying the progress of the test in real time. The system includes the capability for the operator to alter the test process and conditions at any stage of the test.

Technical Specifications

Capacities 2.5 Kn, 5 Kn or 10 Kn

Vertical Engine Stepper engine with built-in controls for vertical load

Horizontal Engine stepper motor with built-in controls for horizontal load

Speed Range 0.00003 to 15 mm per min.

Horizantal Travel +125 mm

Vertical Travel 12.5 mm

Power supply 220-240 V 1 ph 50 Hz 750 W

Dimensions: 228 x 560 x 762 mm

Product Code Product Description

PRS-KA0580 Digital Point Load Tester

The PRS-KA0580 Digital Point Load Tester is used to determine the strength values of a rock specimen both in the field and in the laboratory.

It consists of a load frame for applying loads up to 56 KN, on which a manual hydraulic jack is mounted. The instrument accepts core specimens up to (101,6 mm) diameter which are loaded by two coneshaped points.
A graduated scale indicates the distance between the conical points.

The applied load is measured by a high precision electric load cell with a digital display unit range 0-56kN proving:
- 65.000 divisions
- 0,001 kN resolution
- Linearity: 0,05%
- Hysteresis: 0,03%

PRS-EU8050 " Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph.

PRS-EU8300 " Electromechanical Universal Test Machine, 300 kN, 220-240V, 50-60Hz, 1 ph.

PRS-EU8050, 50 kN and PRS-EU8300, 300 kN capacity fully automatic Electromechanical ParsRos Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. PRS-EU8050 and PRS-EU8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories.

Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories.
These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system.

The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor.

Advanced closed loop control system assures accurate load or displacement pace rate on sample.

The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models.

The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC.

The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.

Certofix Safety Trio
Triple-lumen catheter set for catheterization of the vena cava according to the Seldinger method with the possibility of ECG based Central Venous Catheter tip placement and position control
Picture of product
Certofix Safety Trio
Set consists of:

Quick Details
Type:Pencil case

Material:PU leather

Place of Origin:Ankara, Turkey

Size: 19,5 cm x 4 cm

Name Surname/Initial Personalization:Laser Engraving, Clich Print (emboss), UV Print

Quality Control:

Professional QC team.

Each product is through strict inspection before shipment

Type:Passport case

Material: Polyester felt

Place of Origin:Ankara, Turkey

Size:11 cm x 14 cm

Style: Simplicity/Fashion/Minimalist/Modern/Corporate/Unisex

Name Surname/Initial Personalization:Laser Engraving

Quality Control:

Professional QC team.

Each product is through strict inspection before shipment

Quick Details
Type:Coaster

Material: Polyester felt, can be shaped by laser machine

Place of Origin:Ankara, Turkey

Size:9 cm

Style: Simplicity/Fashion/Minimalist/Modern/Corporate/Unisex

Name Surname/Initial Personalization:Laser Engraving

Quality Control:

Professional QC team.

Each product is through strict inspection before shipment

Quick Details
Type:Tablet Case

Material: Polyester felt

Place of Origin:Ankara, Turkey

Size: 19 cm x 25 cm

Style: Simplicity/Fashion/Minimalist/Modern/Corporate/Unisex

Name Surname/Initial Personalization:Laser Engraving

Quality Control:

Professional QC team.

Each product is through strict inspection before shipment

Quick Details
Type:Wallet, Cardholder

Material:PU leather, card holder, identitiy holder, money division

Place of Origin:Ankara, Turkey

Size: 10 cm x 7,5 cm

Name Surname/Initial Personalization:Laser Engraving, Clich Print (emboss), UV Print

Quality Control:

Professional QC team.

Each product is through strict inspection before shipment

Quick Details
Type: Felt Bookmark

Material: Polyester felt, can be shaped by laser machine

Place of Origin:Ankara, Turkey

Size:4cm x 16cm

Style: Simplicity/Fashion/Minimalist/Modern/Corporate/Unisex

Name Surname/Initial Personalization:Laser Engraving

Quality Control:

Professional QC team.

Each product is through strict inspection before shipment

Product Code : Product Description

PRSG-0420 High Capacity Screen Shaker Time-Controlled, 220-240 V 50-60 Hz

PRSG-0420/110 High Capacity Screen Shaker Time-Controlled, 110 V 60 Hz

PRSG-0422 High Capacity Screen Shaker Frequency & Time-Controlled, 220-240 V 50-60 Hz
PRSG-0422/110 High Capacity Screen Shaker, Frequency and Time-Controlled, 110 V 60 Hz

PRSG-0425 Pan

PRSG-0426 Soundproof Safety Cabinet

STANDARDS : EN 1339, 1367-1; TS 2824
The PRSG-0420 and PRSG-0422 are ideal for sizing large quantities of crushed stones, sand, gravel, slag, coal, coke, ores, pellets and similar materials. The screen shaker has a capacity of approx. 30 kg of sample. To be use with 667x452x67 mm dimension screens. The shaker has 6 screens and 1 pan capacity.
PRSG-0420 model is time-controlled, PRSG-0422 model is frequency and time-controlled.
Various sized wowen wired from 100 mm (4â?�) to 4 mm (no.5) or perforated plate from125mm to 5.6mm screen trays are available on request.
PRSG-0426 Soundproof Safety Cabinet is manufactured from sheet steel lined internally with soundproofing material to reduce noise and for protection from dust.
Screen trays and Soundproof Safety Cabinet (PRSG-0426) should be ordered separately.
The PRSG-0420 or PRSG-0422 is supplied complete with;
â?¢ Pan (PRSG-0425)

Woven Wire Cloth Screen Trays ASTM E11 Perforated Plate Screen Trays
Product Code Aperture mm (in) Product Code Aperture mm (in)
PRSG-8WC1000 100 mm (4 in) PRSG -8PC0056 5.6
PRSG-8WC0900 90 mm (3 ½ in) PRSG -8PC0080 8
PRSG-8WC0750 75 mm (3 in) PRSG -8PC0112 11.2
PRSG-8WC0630 50 mm (2 in) PRSG -8PC0160 16
PRSG-8WC0500 45 mm (1 ¾ in) PRSG -8PC0224 22.4
PRSG-8WC0450 37.5 mm (1 ½ in) PRSG -8PC0315 31.5
PRSG-8WC0375 31.5 mm (1 ¼ in) PRSG -8PC0450 45
PRSG -8WC0315 25 mm (1 in) PRSG -8PC0630 63
PRSG -8WC0250 22.4 mm (7/8 in) PRSG -8PC1250 90
PRSG -8WC0190 19 mm (¾ in) 125
PRSG -8WC0160 16 mm (5/8 in)
PRSG -8WC0125 12.5 mm (½ in)
PRSG -8WC0112 11.2 mm (7/16 in)
PRSG -8WC0095 9.5 mm (3/8 in)
PRSG -8WC0080 8 mm (5/16 in)
PRSG -8WC0063 6.3 mm (¼ in)
PRSG -8WC0056 5.6 mm (No. 3 ½ in)
PRSG -8WC0047 4.75 mm (No. 4 in)
PRSG -8WC0040 4 mm (No. 5 in)

SCREEN SHAKER
Dimension 587x787x850 mm
Weight (approx.) 170 kg
Power 550 W

SCREEN TRAYS
Dimensions 667x452x67 mm
Weight (approx.) 7 kg

Temperature signs can be produced in any size and shape. Technical specifications include;
- Can be produced in desired size and shape
- Adjusted via a radio frequency remote controller
- Does not need to be re-adjusted on blackouts
- Can measure temperatures below zero
- Low power easy to use
- Optional humidity sensor
- Optional alarm clock
- No regular servicing needed after installation
- Technical support for problems.

Overview
Quick Details

Type:Laptop Sleeve

Material: PU leather, cover with velcro, leather lining

Place of Origin:Ankara, Turkey

Size: 35cm x 23,5cm

Style: Simplicity/Fashion/Minimalist/Modern/Corporate/Unisex

Name Surname/Initial Personalization:Laser Engraving, Clich Print (emboss), UV Print

Quality Control:

Professional QC team.

Each product is through strict inspection before shipment

Size 13"

Type:Laptop Sleeve

Material: PU leather, felt lining, rubber closure

Place of Origin:Ankara, Turkey

Size: Side to side 33,5 cm x 23,5 cm

Style: Simplicity/Fashion/Minimalist/Modern/Corporate/Unisex

Name Surname/Initial Personalization:Laser Engraving, Clich Print (emboss), UV Print

Quality Control:

Professional QC team.

Each product is through strict inspection before shipment

Overview
Quick Details
Type:Laptop Sleeve, Laptop Bag

Material: PU Leather, Polyester Felt, metal snaps

Place of Origin:Ankara, Turkey

Size: 35 cm x 23,5cm

Style: Simplicity/Fashion/Minimalist/Modern/Corporate/Unisex

Name Surname/Initial Personalization:Laser Engraving, Clich Print (emboss), UV Print

Quality Control:

Professional QC team.

Each product is through strict inspection before shipment

Size 13"

Overview
Quick Details
Type:Laptop Sleeve, Organizer, Portfolio

Material: PU leather, leather strap with metal snap fastener

Place of Origin:Ankara, Turkey

Brand Name:Misingpiece

Size: 24,5 cm x 33 cm

Name Surname/Initial Personalization:Laser Engraving, Clich Print (emboss), UV Print

Quality Control:
Professional QC team.

Each product is through strict inspection before shipment

Quick Details
Type:Wallet, Cardholder, Organizer

Material:Genuine leather, uv print, card holder, identitiy holder, pencil division, phone division, money division

Place of Origin:Ankara, Turkey

Size: 9,5 cm x 17,5 cm

Name Surname/Initial Personalization:Laser Engraving, Clich Print (emboss), UV Print

Quality Control:

Professional QC team.

Each product is through strict inspection before shipment

Structure Size : 58-63-74-81-93 / MR65-MR71-MR-80/112
Rated Power : 1.1-7.5 kW
Pole Number : 2 - 4
Protection Class : IP55
Voltage : 380 V
Frequency : 50 Hz
Build Type : B3
Mechanical Structure : Aluminum or Iron Body
Cooling Type : IC 411
Insulation Class : F
Working Regime : S1, S6- 40%
Ambient temperature : 40 C
Motor Protection -

Quick Details
Type:Laptop Sleeve, Laptop case

Material: PU leather cover, polyester felt, metal snaps

Place of Origin:Ankara, Turkey

Size: 26,5 cm x 40 cm

Style: Simplicity/Fashion/Minimalist/Modern/Corporate/Unisex

Name Surname/Initial Personalization:Laser Engraving, Clich Print (emboss), UV Print

Quality Control:

Professional QC team.

Each product is through strict inspection before shipment