Find Verified Ties Suppliers, Manufacturers and Wholesalers

Code 93100: PE film on nose band for glasses wearer

Features
Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications.

Face mask with PE film on nose band for glasses wearer.

1. Type: Flat shape, 3-ply, non-sterile
2. Color: Green, blue, pink, white
3. Outer Layer: Water-repellent non-woven
Middle Layer: High level static filtration non-woven
Inner Layer: Microfilter thermal-bond non-woven
4. Nose band: PE iron wire
5. Anti-fog film: PE or non-woven material
6. Wear-type: Ear-loop and 4-ties

Code 91100: 4-ties

Features
Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications.

3-ply, non-woven material, 99% BFE at 3 micron.

1. Type: Flat shape, 3-ply, non-sterile
2. Size: L
3. Color: Green, blue, pink, white
4. Outer Layer: Water-repellent non-woven
5. Middle Layer: High level static filtration non-woven
6. Inner Layer: Microfilter Thermal-bond non-woven
7. Nose band: PE iron wire

3/7 2021
SUPERIEUR READY STOCK IN VIETNAM 15m+

RATE USD $8.8
Payment : 100% ITLC

1. PO AND NCNDA signed by buyer
2. SPA AND PI by seller
3. SIGNED SPA AND PI by both parties
4. 2% Cash down pay for SGS perform under buyer's name
5. 98 LC payment release upon SGS or FIA inspection Report, BL and Export docs.
6. Payment Released:
7. Official BL AND ALL DOCUMENTS RELEASE.
9. Good Pick up
10.Case Close

The negative pressure isolation ward is commonly used for patients with communicable diseases, especially airborne infections. Many facilities are choosing to place potentially infected COVID-19 patients in isolation rooms if the situation permits.

Our negative pressure mobile medical ward includes (but not limited to) the following contents:
1. sealing partition engineering work
2. Air conditioner
3. 1 set of HEPA air filter (which is originally from the negative pressure air system)
4. air sealing door
5. light current system engineering work
6. negative pressure gauge
7. wear-resisting floor

*Most of the contents are made in Taiwan and the product is SGS certified for medical/healthcare purposes.
*Please contact us for more details and specifications of the negative pressure mobile medical ward.

Hulled sesame seeds, especially sort out impurities, dust, etc. It is the best sesame raw materials for food industry to reduce raw material loss and enhance production yield rate. Our raw hulled sesame seeds, especially sort out impurities, dust, etc. It is the best sesame raw materials for food industry to reduce raw material loss and enhance production yield rate. It's suitable for bakery and pastry use.

Prices are subject to change, please contact us for current price

Hulled sesame seeds, especially sort out impurities, dust, etc. It is the best sesame raw materials for food industry to reduce raw material loss and enhance production yield rate. Our raw hulled sesame seeds, especially sort out impurities, dust, etc. It is the best sesame raw materials for food industry to reduce raw material loss and enhance production yield rate. It's suitable for bakery and pastry use.

Prices are subject to change, please contact us for current price

PA6 (Nylon6) / N140
Low Viscosity :PA6(Nylon6) N140 : R.V. 2.45 ,
N140-3C2:Nylon Modified Chip Luster: BR
# PA6 (Nylon6) of Product Characteristics
-Good mechanical properties, excellent impact resistance.
-Hard surface, small friction coefficient.
-Good electricity properties, excellent low temperature properties.
-Good chemical and oil resistance.
PA6 (Nylon6) resin of Application
-Injection/Extrusion molding
-Compounding
-Packaging film
-Fishnet
-Tire cord

Radiant putty can easily remove dirt, dust mite (allergy), hairs, scurf, etc., which hide in the cavities and crevasse of 3c products clothes, household appliances, furniture, toy and daily commodities. Specially recommend for dust mite allergy group, pet raising family and internet cafe group.

140g/ bottle

DESCRIPTION
ITSEAL is truly developed for sealing window frames with highly durable and flexible properties to withstand severe weathering and extreme temperatures. It seals small gap that normal sealant cannot reach and penetrate. It provides a truly watertight seal deep into minute joint and gap.

FEATURES
* ITSEAL is the only waterproof sealer that is completely watertight.
* It is highly water repellent that no water can get through it during storm.
* It adheres well on aluminum and glass
* Once dried, ITSEAL is flexible and accommodate joint movement due to vibration.
* Mill finish aluminum, oil or wet surfaces can also be well-sealed.

VOC CONTENT
Type of Regulated Adhesive under the Air Pollution Control (Volatile Organic Compounds) Regulation of Hong Kong: Architectural Sealant VOC Content (Ready to use): 248g/Ltr.

SURFACE PREPARATION
For maximum adhesion, the adhesive surface must be free of dust, release agent, oil and grease. Wipe surface with solvent is recommended. Solvent are obtainable from ITLS-SB.
This information in this catalogue is provided to the best of our knowledge from results gathered both internal and external credited laboratories. However, we have no control over site applications, site conditions and workmanship of the applicator. We therefore will not accept any liability, either directly or indirectly arising from the misuse of these products or when the product is used not in accordance with any advice, specification, and recommendation of information given by us, The user is responsible for checking the suitability of these products for its intended use.

APPLICATION
ITSEAL can be used with hand operated or air operated grease pump. Other simple extruding device can also be used but it has to be solvent resistance.

LIMITATION
* Not suitable large gap wider than 5 mm wide and deep. For deeper joint fill to half of it,
let it dry overnight and fill it up the next day.
* Not suitable for use as expansion joint.

COLOUR AND PACKING
26 kg / pail
Grey/Black/Bronze/White

SAFETY INFORMATION
* ITSEAL is flammable. Please keep away from sources of ignition during application.
* Avoid breathing in solvent by wearing solvent vapor respiratory mask in badly ventilated
area or confined space.
* Avoid contact with skin and eyes. If swallowed please contact doctor immediately.
* ITSEAL meets the requirement of RoHS regulation of European Union and it does not
contain eight heavy metals which were restricted by ASTM F963 or EN71 part3.
* Please read the Material Safety Data Sheet in regards to flammability and health and
hazard.

SHIPPING/STORAGE INFORMATION
ITSEAL must be stored in a cool place under 25°C and away from direct sunlight. The shelve life is 12 months if stored in accordance to the recommendation.
Dangerous Goods Information: Cement Adhesive, Class 3, UN1133 PG III.

DESCRIPION
FR-48 is solvent-less moisture cure type, single-component flame retardant RTV silicone product. It is suggested for use in applications requiring neutral cure, fast cure and excellent adhesion.

FEATURES
* Sealing of electrical components
* Industrial plastic sealing, electrical insulation properties.
* Low flammability â?? has a UL rating of V-0(1)
* Primerless adhesion to plastics and metals
* Excellent resistance to moisture, dust, UV and ozone.
* Fast room temperature curing
* High temperature resistance (Flexible from -60â?? to 200â?? continuous operation and
260â?? for short periods)

COMPATIBILITY
FR-48 contamination -free silicone sealant shows excellent adhesion for Al panel, stone, glass, PVC, or wood. As new construction materials appear and the material surface treatment method varies, some materials may cause poor adhesion or discoloration.
FR-48 contamination-free silicone sealant is chemically stabilized, maintains a uniform paste shape all the time, and may be workable at the temperature range of -25â??~50â?? unless there is moisture.

LIMITATION
* For structural construction
* At completely enclosed space
* On frosty or wet target surfaces
* For the parts with potential continuous flooding
* In the internal fire area
* For materials where oil, plasticizer, or other solvent is leaking.
* For polypropylene, polyethylene, polycarbonate, or Teflon material.
* At horizontal : joints potential physical friction
* For the parts requiring painting on the sealant
* For materials with surface temperature over 50â??

PACKING 300ml Cartridge
COLOR White and grey

STORAGE
Shelf life is 1 year if stored unpacked in cool and dry condition away from direct sunlight.

DESCRIPTION
CP-311T elastic polyester is a new type product with a special polymerization. It is a one compound high-performance elastic waterproof membrane.
The single-liquid self-crosslinking waterproof polymer with anti-fouling and wear-resisting properties is used for the coating and protection of elastic waterproof materials, roofing, wall and other elastic materials.
This product has high adhesion, elasticity, wear resistance and protection. It is water-resistant, weather-resistant and hydrophobic. It is the best choice for long-term protection.


SPECIFICATIONS
1. AppearanceWhite Emulsion
2. Solid Content48~52 %
3. Viscosity3000 ~ 6000 cps(RVT#3@25)
4. Proportion1.15~1.25


PROPERTIES
Developed with an environmentally friendly formulation that is water-based, non-toxic and low-odor, in line with environmentally friendly low VOC regulations and CNS waterproofing specifications.
The self-crosslinking single-liquid resin can make the construction work simple, and can be directly sprayed, rolled or brushed.
Suitable for indoor, outdoor, floor and wall applications with high toughness, water resistance and wear resistance
Excellent film properties: elastic value and stretchability, and excellent wear resistance
Weathering, aging resistance, can effectively increase the life of the paint
Excellent adhesion, breathability and foam resistance, which can effectively prevent surface blistering and false after application.

DESCRIPTION
CA-002 is an Acrylic Polymer emulsion, especially used to improve the physical properties of cement. It can be mixed with water at any ratio.

AREA OF APPLICATIONS
* Repair mortar for concrete areas
* Industrial flooring
* Bonding agent for new to old concrete
* As cement grout additive
* As water based primer
* For making two component tile adhesive
* As adhesion aid for skim coat materials

DESCRIPTION
ITLS LD5 is a high performance liquid deadener for panel vibration damping and noise
control. The exceptional vibration damping properties are complimented by fast drying ,
ease of use, environmental friendliness and low flammability.
ITLS LD5 is a thixotropic paste and is specially designed for trowel, pour, brush, roll-on and air-gun spray applications. Once dry the cured film is UV resistant and water resistant.
ITLS LD5 is a light weight product. The dry film is light in weight without compromising the high performance. Consequently, this material is recommended for weight sensitive
applications eg. aircraft, marine and automotive applications.
ITLS LD5 effectively reduces resonant vibration. Vibration energy is absorbed within the
material and converted to heat. In addition to vibration damping, it also increases substrate transmission loss as a result of the reduction of panel coincidence and panel resonance effects.

CP-311 Hyperguard WPU is water-based polyurethane, waterproofing coating for roofs when mechanical durability and outstanding waterproofing properties are required. It forms a non-penetrating against moisture film with resistance to UV and mechanical stress. Ideal solution for waterproofing walkable roofs
High mechanical strength
Applicability and on cloudy days as the final polymerization of the material is done by evaporation, and therefore under shading
No appearance of holes in the surface during the curing of material
Protection of polyurethane foam insulation
Certified with CE
Eco-friendly (Water-based)
Easy to apply
Resistant to temperatures from -15 to 80

CC-402 is a one component, plasto-elastic coating based on UV-curing acrylic dispersion with excellent crack-bridging properties even at temperatures below 0°C. CC-402 complies with the requirements of EN 1504-2 as protective coating.

CC-402 is used for protection and enhancement of concrete structures (normal and lightweight concrete),especially exposed outdoor concrete surfaces with a risk of cracking CC-402 is used with concrete repair works as an elastic protective coating on AFTEK smoothing mortar (refer to product / system data sheet), fiber cement and over coating of existing soundly adhering coatings.

Suitable for protection against ingress (Principle 1, method 1.3 of EN 1504-9)
Suitable for moisture control (Principle 2, method 2.3 of EN 1504-9)
Suitable for increasing the resistivity (Principle 8, method 8.3 of EN 1504-9)
Crack-bridging even at low temperatures (-5°C)
High diffusion resistance against CO2 reducing the rate of carbonation
Water vapour permeable
Very good resistance against weathering and ageing
Environmentally friendly (solvent free) .Reduced tendency to dirt pick up and
contamination.

Origin / quality : taiwan / cns # 1
Moisture : 14.5%
Impurities : 0.1%
Broken kernels: 5%
Damaged kernels: 1%
Off-type kernels : 1%
Chalky kernels : 5%.


30 kg new pp bags

DESCRIPTION
Hydrostatic press stone filmless maintenance agent is a maintenance hybrid comprised of a special kind of Oligomer Silsesquiloxane mixed in a water-based solution, formulated with powerful surfactants attributing to its excellent-resistance properties and a non-yellowing methyl silane hybrid, which reacts with the moisture and CO2 in the air, forming a nonsolvent based resin that penetrates into the substrate heightening its water proofing ability. Its ability to penetrate deep into the concrete, as deep as 3~5m/m, distinguishes it from other products on the market. Moreover, it can cause a chemical reaction with alkaline materials that produces crystals inside the concrete, that can fill and block the micro-vein within the concrete so as to reach the waterproof effect in depth; thus, the longevity of the building can be extended.

APPLICATION
Water, anti-pollutants and anti-weathering resistance for various surfaces such as: tiles, gaps between tiles, terra cotta, calcium silicate board , plasterboard ,bricks,concrete,
natural and process stone, stone carving, stone washing, stone smoothening, stone cutting,sidewalks, parking plywood.

ADVANTAGES
* Highly active molecule that is eco-friendly, water-based and inorganic produces strong
adhesive to the substrate after chemical cross-linking.
* High permeability and excellent durability.
* Non-yellowing, no stain contaminated, dirt can be easily washed off with water from rain
or washing walls.
* Excellent water repellent ability (the so-called Lotus effect) can effectively prevent
from water permeating.
* It is suggested to apply new coat regularly every three years; thus it can continue to
maintain water-repellent and anti-pollutant functions.

Dual functions
Fast drying 2 in 1 -adhesive sealant

Faster and higher green strength than solvent based construction high strength formed after 5 hrs.

Water-based construction adhesive is developed to serve as adhesive and sealant give good wet grab. The adhesive is tough but also flexible. Developed for both professional and home handy man using AFTEK own new technology.
1. Fast setting
2. Very Tough but flexible with good degree elasticity
3. High heat resistance better than solvent based adhesive
4. Plasticizer resistant
5. No Sagging No sliding on smooth surface, can use on ceiling
6. No Drooling, no wastage and no mess on floor to clean up
7. High wet grab good for sticking heavy tiles and not slippery.
8. Easy to extrude even on cold day.

Features:
* Almost odorless.
* NO VOC safe to use indoor.
* Exceptional fast bond development.
* Creamy smooth easy to spread.
* Highly thixotropic easy to use on wall and ceiling without dropping off.
* Good gap filling properties-suitable for filling uneven surface or small crack due to high
solid content.
* Paintable when dry.

Product Specification:
Highest Solid by weightâ?? 82% -83% few if any can match it.
* SG â?? 1.65 â?? low filler surface area more binder for better adhesion.
* pH 6 â??7 â??Near neutral safe on substrates.
* No caustic soda or ammonia safe to use at home.
* 5 hours bond strength 2.0 kg force/cm2
* After 24 hrs Bond strength 22 kg force/ cm2 no other WB adhesives can match that.

Clean Up
Clean up tool as soon as possible with water before it set hard. For harden adhesive, scrap off as much as possible with a strong scraper. Use solvent such as mineral turp to
soften the remaining adhesive.

Shelf life â?? I year if kept at ambient temperature within 5â?°C - 35â?°C.

DESCRIPTION
CC-404 is a two component, high performance, pre filled epoxy grout , suitable for use as a pourable or fluid grouting material. Aftek F4 and F6 fillers may be added to produce a trowellable high build mortar or a pourable flowable grout.

FEATURES
â?? High flow properties
â?? Bonds to damp substrates
â?? Rapid hardening and strength gain
â?? High chemical resistance
â?? Pre-measured kits make for ease of use
â?? High tensile and compressive strength
â?? 100% solid epoxy
â?? Excellent adhesion to most substrates
â?? Cures at temperatures down to 5oC
â?? Negligible shrinkage
â?? High mechanical strength
â?? Solvent free High early strength

PACKAGING
CC-404 is available in 3 litre and 15 litre kits

DESCRIPTION
A Torch on waterproofing membrane for multi layer application; following project evaluation this membrane may be used as an intermediate layer in fairly large professional waterproofing application with top quality membrane on stable surfaces or in temporary applications such as retaining walls to provide protection against ascending moisture on under-flooring surfaces.
The COMPOUND used in ITLS CP-109 membranes contains distilled bitumen,
polypropylene polymers and stabilizing aggregates and is the result of many years of
research to obtain the best performance for specific roofing applications.
The use of REINFORCEMENT in reinforced glass mat or non woven polyester stabilized
with glass fibers gives ITLS CP-109 good dimensional stability and excellent mechanical
properties in this class of polyester membranes for standard applications.
Top FINISH in silica sand, non-woven polypropylene or self-protecting natural and colored
slate chips disseminated uniformly and firmly anchored; 3/4mm version with embossed
finish, all others are smooth. Both BOTTOM finish with torch off polyethylene sheets.
PRODUCT PLUSES ï¼? guaranteed by more than 10 years in the field; low cost high
performance; wide product range.