Please click here to check who's online and chat with them.

Find Verified Oats Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : Taipei   Taichung   Kaohsiung  
Jan-28-21
Hartalega Coats NBR Gloves

Hartalega Coats Nbr Gloves

$7.60
MOQ: Not Specified
  Pros Corp
Supplier From Taipei, Taiwan
Supplier Of Medical Gloves   |   Oats   |   Coats
 Inquire Now  
Hartalega Coats NBR gloves
Jan-31-19
CC-102 Concrete Hardener

Cc-102 Concrete Hardener

$1
MOQ: Not Specified
  Itls International Development Co, . Ltd.
Supplier From Taipei, Taiwan
Supplier Of Oats   |   Coats
 Inquire Now  
DESCRIPTION
CC-102 Concrete Hardener is a clear high performance waterborne liquid which being
applied to the floor and absorbed into the concrete pores and reacts with the calcium salts effectively making the concrete surface denser and considerably less porous.

APPLICATIONS
Suitable for improving the quality of concrete floors in factories, warehouse and any other
area where hard non-dusting floors are important.

SURFACE PREPARATION
Surfaces should not have had previous treatments. They should be firm and free from oil,
dirt, dust etc. Weak spots should be cut out and filled with CEMCRETEâ??S FLOOR
PATCHING. All surfaces to be dry at time of application.

MIXING AND APPLICATION
Shake or roll drum to thoroughly mix contents. Apply HARDENER to the dry surface using a soft household broom or paint roller. Application should be liberal but it is advisable to brush away unabsorbed pools immediately to avoid the HARDENER forming glassy layers. Allow one day between coats. Two coats are usually sufficient, but a third might be required if the concrete is very porous

SPECIMEN FINISH
A trial area should be treated on site for the Engineerâ??s or Architectâ??s approval.

COVERAGE
Depends upon the suction and texture of the surface.
Approximately 6m2 / litre/coat.
Apr-01-20
Cc-401 Rockprimer Rc

Cc-401 Rockprimer Rc

$1
MOQ: Not Specified
  Itls International Development Co, . Ltd.
Supplier From Taipei, Taiwan
Supplier Of Oats   |   Coats
 Inquire Now  
Description
CC-401 is a water based reinforced with acrylic polymers and graded fillers primer for concrete and masonry surfaces in order to improve adhesion between the substrate and subsequent coats.

Appropriation
For Rockflexï¼?RCï¼?Masonry System
Characteristics Ready to useï¼?Easy to apply
Improves adhesion
Improves the finish of topcoat Non-toxic

Surface preparation:
Concrete substrate shall be dry, sound, clean and uncontaminated.
All loose particles, curing compound, shuttering oil, debris etc shall be removed.
Temperature Condition: Ambient temperature shall be between 10 and 50 °C

Application:
CC-401 is applied at 4 - 6 m2/ltr depending on substrate porosity and allowed to cure for 2 to 4 hours at 25 °C before over-coating with Rockflex systems Cleaning: Clean the tools with water immediately after use.

Packing and Storage
CC-401 is available in 20 ltr pack and it shall be stored in cool, dry and shaded warehouses. Shelf life is 12 months when stored under cover, out of direct sunlight, protected from extreme temperatures and as per manufacturers recommendations. In extreme tropical climate, the product shall be stored in cooled ambience. Excessive humidity and over exposure to UV will result in the reduction of shelflife.
Dec-06-22
Pontoon Boats

Pontoon Boats

$11.90K
MOQ: Not Specified
  Giant Well Corp.
Supplier From Taipei, Taiwan
Supplier Of Boats & Vessels   |   Oats
 Inquire Now  
Specification
item value
Length (m) 7.5 - 9m
Condition New
Fuel Type Petrol / Gasonline
Hull Material Aluminum
Length (m) 8m
Product Name Luxury Aluminum Pontoon Boats for Party, Fishing, Sport
Application Sea - River - Lake - Ocean
Color Customized Color
Warranty 3years
Condition New
Fuel Type Petrol / Gasoline
Material Marine Grade Aluminum DNV 5083
Dec-06-22
House Boats

House Boats

$86.90K
MOQ: Not Specified
  Giant Well Corp.
Supplier From Taipei, Taiwan
Supplier Of Boats & Vessels   |   Oats
 Inquire Now  
Specification
item value
Length 11m
Beam 4m
Hull Material Aluminum
Type Pontoon house boat
Engine Type Outboard
Color Customized Color
Warranty Hull- 3 Years
kill tank 60L
fuel tank 360L
Engine 2x115HP
Weight(boat only) 4800kg
Number of pontoon 3
13 Oats Suppliers
Short on time? Let Oats sellers contact you.
Aug-21-18
CC-500 Dura-Shine

Cc-500 Dura-Shine

$100.00K
MOQ: Not Specified
  Itls International Development Co, . Ltd.
Supplier From Taipei, Taiwan
Supplier Of Construction Materials   |   Oats   |   Coats
 Inquire Now  
Description
CC-500 Dura-Shine is one component, aliphatic, UV resistant polyurethane based topcoat membrane. Product cures with the humidity and produces a transparent film and by this way it provides excellent adhesion over the entire surface.

Feature
Resistant to UV, exposed sunlight and chemicals
When applied, it forms as seamless membrane without joints
Product keeps its mechanical features over a temperature span of 40 to 90 degrees Celsius

Use Area
Roof terraces balconies and verandas
Industrial floor coatings
Stadium, car parks
Stones, marble and ce ramic surfaces

Coverage
Consumption of each layer: 0.1-0.15 kg/m2
Minimum two coats should be applied
Total consumption: approx. 0.2-0.3 kg/m2
Recoating: Do not exceed 48 hours between each coats. Application must be repeated if
this time is exceeded
Jul-14-20
CC-105HD Duraflex

Cc-105Hd Duraflex

$1
MOQ: Not Specified
  Itls International Development Co, . Ltd.
Supplier From Taipei, Taiwan
Supplier Of Electric Components   |   Oats   |   Coats
 Inquire Now  
Description
CC-105HD Duraflex is one component, eco-friendly, water-based topcoat membrane.

Feature
Resistant to exposed sunlight and chemicals.
When applied, it forms as seamless membrane without joints.
Product keeps its mechanical features over a temperature span of 40 to 90

Use Area
Roof terraces balconies and verandas.
Industrial floor coatings.
Stones, marble and ceramic surfaces Coverage.
Consumption of each layer: 0.1.5-0.2.5 kg/m2.
Minimum two coats should be applied.
Total consumption: approx. 0.3-0.5 kg/m2.
Recoating: Do not exceed 48 hours between each coats. Application must be repeated if this time is exceeded.
Jan-09-17
Jet Aerator

Jet Aerator

$1.00K
MOQ: Not Specified
  Enfound Enterprise Co. Ltd.
Supplier From Taipei, , Taiwan
Supplier Of Industrial Machinery & Plants   |   Oats   |   Ties
 Inquire Now  
Working principles:

The surface jet aerator is horizontal aerator is used in pretreatment for mixing, secondary and tertiary treatment for oxygen transfer and aquaculture aeration. During the propeller rotates to create the negative pressure, the air is drawn into the shaft and dispersed it into the water in a horizontal direction. The air past the propeller and mix with the fluid will establish micro and high velocity bubbles into the water. The surface jet aerator installations can completely or partially mix very large volumes of water at lowest installed power, and provide excellent turndown capabilities the surface jet aerator ranges from to 50 hp and can be mounted on floats, fixed to a bridge or wall etc. It can also be easily installed in fluctuating water level situations advantages for various

Applications:

1. Oxidation ditch:
The ra surface jet aerator is most suitable for oxidation ditch special design and shape due to the powerful horizontal mixing capacity.

2. Aerated lagoons:
The ra surface jet aerator provides horizontal flow and strong mixing is that often to use on various depth aerated lagoons.

3. Traditional aeration tank:
The ra surface jet aerator often be utilized in traditional tank for activated sludge or digester. The unit can provide the complete mix and eliminate the blind point.

4. River and canal restorations:
The ra surface jet aerator can improve the water quality in lake, canal and reservoir. The ra surface jet aerator can easy and flexible install on floating, bridge and wall.

5. Aquaculture:
The ra surface jet aerator provide the minimal maintenance and superior performance ( oxygen supply and mixing) for fish and shrimp farm.
Oct-06-08
Guardianship - standing lamp

Guardianship - Standing Lamp

$500 - $900
MOQ: Not Specified
  Fate-Design Original Co., Ltd.
Supplier From Taipei, Taiwan
Supplier Of Fluorescent Lamp   |   Oats   |   Yam   |   Fig
 Inquire Now  
The humanoid figure, representing the meaning of "guardianship", is one of ancestral totems of the tao (yami) tribe in the orchid island. Now it could always be seen on the traditional handmade boats called "dadala" in the tao (yami) langauge. Transforming the totem into a graceful lace-like shape on the lampshade to make the home be alive with "guardianship" of the tao (yami) tribe through the projection of the light.
Standing lamp, lace shadow, flat stainless steel(no.8*1.5m/m)
Size - tall 152cm, diameter of lampshade 29cm
Aug-21-18
CS-006 Starcoat PL

Cs-006 Starcoat Pl

$100.00K
MOQ: Not Specified
  Itls International Development Co, . Ltd.
Supplier From Taipei, Taiwan
Supplier Of Construction Materials   |   Oats   |   Coats   |   Ties
 Inquire Now  
DESCRIPTION
STARCOAT PL, is fine grade cement based finish plastering skimcoat which contains
selected filler and additive used for smooth finishing to uneven wall cement based plaster
and ceiling. After dry STARCOAT PL have a good adhesion to the substrate, no cracks,
smooth, no dust on the surface and ready to be painted with water based paint.
Easy to use, good workability and have a long pot life and correction time even at the
outdoor applications.

USES IN APPLICATIONS
*Cement Based Wall Plaster.
*Precast Concrete.
*Concrete Profile & Concrete Ceilings
*Internal & External.

ADVANTAGE
*Light, good workability and sanding properties.
*No cracks and hair cracks. (depends on background)
*Smooth surface, solid and no powdery.
*Can be painted or finished with wallpaper directly after dry in minimum 24 hours without
using PVA putty to leveling up & filling uneven rough surface.

PRODUCT SPESIFICATIONS
1. Main Binder : Portland Cement & Polymer
2. Filler: Limestone
3. Color: GREY and WHITE.
4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags.
or 28 - 32 % water demands.
5. Coverage: 1.25-1.3 Kg/m2/mm
or 19m2/25 Kg/mm thickness average 7.5m2/25Kg for 2-3mm thickness
6. Thickness: 2mm thickness/coat
4mm for 2 coats and 6mm for 3 coats.
7. Pot Life: approx. 60 minutes

SURFACE PREPARATION
1. The substrate must be clean and free from grease and loose particles. Recesses
should be pre-patched and levelled where appropriate.
2. Porous and absorbent substrates must be pre-wetted prior to application of Starcoat PL finish coat.
Aug-21-18
CS-006 Starcoat CN

Cs-006 Starcoat Cn

$100.00K
MOQ: Not Specified
  Itls International Development Co, . Ltd.
Supplier From Taipei, Taiwan
Supplier Of Construction Materials   |   Oats   |   Coats   |   Ties
 Inquire Now  
DESCRIPTION
a premium cement based finish skimcoat which contains selected filler, additive and polymer used for smooth finishing to uneven concrete wall & ceiling.
After dry STARCOAT CN have a excellent adhesion to the substrate, better impact resistant, no powdery, no cracks, smooth and ready to be painted with water based wall paint. Easy to use, good workability and have a long pot life and correction time even at the outdoor applications.

USES IN APPLICATIONS
1. Cement Based Wall Plaster.
2. Concrete Wall, Column & Ceiling
3. Precast Concrete & Concrete profile
4. Internal & External.

ADVANTAGE
* Light, good workability and sanding properties.
* No cracks and hair cracks. (depends on background)
* Smooth surface, solid and no powdery.
* Can be painted or finished with wallpaper directly after dry in minimum 24 hours
* without using PVA putty to leveling up & filling uneven rough surface.

PRODUCT SPESIFICATIONS
1. Main Binder : Portland Cement & Polymer
2. Filler : Limestone
3. Color : GREY and WHITE.
4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags.
or 28 - 32 % water demands.
5. Coverage : 1.25-1.3 Kg/m2/mm
or 19m2/25 Kg/mm thickness
average 7.5m2/25Kg for 2-3mm thickness
6. Thickness : 2mm thickness/coat
4mm for 2 coats and 6mm for 3 coats.
7. Pot Life : approx. 60 minutes
SURFACE PREPARATION
* The substrate must be clean and free from grease and loose particles. Recesses
should be pre-patched and levelled where appropriate.
* Porous and absorbent substrates must be pre-wetted prior to application of Starcoat
CN finish coat.
Feb-22-19
CP-310 Water-Based Waterproof Membrane

Cp-310 Water-Based Waterproof Membrane

$1
MOQ: Not Specified
  Itls International Development Co, . Ltd.
Supplier From Taipei, Taiwan
Supplier Of Waterproofing Material   |   Oats   |   Coats   |   Bras
 Inquire Now  
DESCRIPTION
CP-310 was synthesized from imported high-technology macromolecule resin and
specialized paint that is different from general acrylic resin. CP-310 is a perfect product to
provide a high water-tolerant, climate-tolerant, and anti-UV ability.

FEATURES
* Excellent environmental water-based waterproofing paint
* Water-based, Non-toxic, odorless, inflammable, and harmless
* Fine adhesion, extreme toughness, high elastic, and high endurance
* Hydrophilic, and may be applied on damp surface

USE
RoofBuilding, condominium, factory, barracks, school, garden and etc..
WallsBasement wall , exterior wall , and etcâ?¦
PREPARATION
1. (The following steps are recommended for best results)
2. New concrete must cure for a minimum of 30 days
3. All holes or cracks must be properly patched
4. All surfaces must be clean and free of dirt, dust, efflorescence and oil

APPLICATION
(The following steps are recommended for best results)
1. Stir well before use. Do not thin; however, if thinning is necessary, thin water at a
rate of no more than 10%
2. One prime required CP-310 primer
3. Two coats are required for the best resultskeep the thickness of each coating
below 1m.
4. Wait for each coating to be total dry before overlaying the next coat. The interval
time between each coating is minimum of 8 hours.

COVERAGE
5-gallons about 33m2

COLOR
Grayã??Whiteã??ivoryã??Green

DRY TIME
Dries to touch in about 1-2days . Low temperatures or high humidity conditions will affect
drying time. Full cure should be reached in 14-30 days.

CLEAN UP
1. Clean hands and tools with soap water.
2. After 30 days or paint has fully cured, areas may be wasted using a non-abrasive, mild
detergent and cellulose sponge.

WARNING
(Read the following carefully for your own safety)
1. Keep out of reach of children-Do not take internally.
2. May cause eye, skin and respiratory tract irritation. May be harmful if swallowed. Use
only with adequate ventilation.
Jan-26-21
Supplier From Taipei, Taiwan
 Inquire Now

Ppe items, n95, coverall, 3 ply mask, customized mask, nbr powder free gloves, v gloves, superieur, anny, mcare, ansell edge, ansell microtouch microthin, hartalega coats, hartalega paloma, kimberley clark kc500, cardinal, gloves, hn gloves, covid 19 rapid tester, rapid tester reader, sri trang, 70%/75% alcohol wipes, 70%/75% alcohol pads, 75% alcohol hand sanitizer.Worldwide international business, buying/sourcing, wholesale, trading

Service Provider Of Trade Promotion Services   |   Buying & Sourcing Agents   |   Marketing / Distribution Agents & Services   |   E-Business Services

Supplier Of Hand Sanitizer   |   Medical Gloves   |   Diagnostic Kits   |   3 Ply Face Mask   |   Rapid Test Kits   |   Alcohol Based Hand Sanitizer   |   Alcohol Disinfectant Wipes   |   Antiseptic Wipes   |   Hand Wipes   |   Wet Wipes   |   Cardinal Gloves   |   Powder Free Gloves   |   Personal Protective Equipment (PPE Kits)   |   Oats
13 Oats Suppliers
Short on time? Let Oats sellers contact you.
See what buyers and suppliers are discussing in Oats import export community
No Time to Search? Post Your Buy Requirement to Suppliers Worldwide.
Download from App Store Download from Google Play
go4WorldBusiness +91-89298-00770 52B, First Floor, Okhla Phase-3 New Delhi, INDIA 110020
© Wyzen Systems Private Limited
All Rights Reserved