Description
CC-610N is a 2k topcoat which cured by non-yellowing isocyanate.
Feature
â?¦ Solvent-free, friendly to human.
â?¦ Compression and impact resistant.
â?¦ Chemical resistant as its special structure.
â?¦ Suitable for critical area (0~80â??).
â?¦ Suitable for food factory, freezer, medicine plant, chemical plant, laboratory..etc
Usage
Used as a topcoat on surface of concrete and
metal, bridges and steel structures.
DESCRIPTION
CC-404 is a two component, high performance, pre filled epoxy grout , suitable for use as a pourable or fluid grouting material. Aftek F4 and F6 fillers may be added to produce a trowellable high build mortar or a pourable flowable grout.
FEATURES
â?? High flow properties
â?? Bonds to damp substrates
â?? Rapid hardening and strength gain
â?? High chemical resistance
â?? Pre-measured kits make for ease of use
â?? High tensile and compressive strength
â?? 100% solid epoxy
â?? Excellent adhesion to most substrates
â?? Cures at temperatures down to 5oC
â?? Negligible shrinkage
â?? High mechanical strength
â?? Solvent free High early strength
PACKAGING
CC-404 is available in 3 litre and 15 litre kits
CP-358 Multi-purposes Paint is based on specific polymer resin and a variety of materials with water resistance ,abrasion resistance, weather resistance characters. This refined dry fast paint can be used in cement ,metal ,wood ,asphalt surface to meet your particular requirement and very economy. Owing to excellent materials , strict QC and production process , Carmine Paint can offer the advantages of time- saving , easy usage .
* Durable hard and tough film.
* Excellent adhesion.
* Excellent abrasion and corrosion resistance.
* used in multi-kind materials, such as metal, wood, cement and asphalt.
* Indoor, outdoor paint.
* Line Marking.
Description
CC-020 is a new type cement based compound coating with various texture of finishes and shades. By apply with different tools and methods, it can provide either natural or rough texture, depending on the requirements.
Use & Feature
1. Suitable for interior and exterior decorative applications.
2. An economical alternative to textured elastomeric coatings.
3. High water-resistance with handy-usability.
4. The built-in texture helps to disguise rough and irregular surfaces.
5. Can be used as primer with water-diluted CC-020.
Feature: Reinforcement of Waterproof
High heat insulation
Good quality and dust resistance
Water resistance and high weather durable.
Drying faster and easy application.
Application
Cement wall
Galvanized steel
Color pre-painted steel
Plywood
Plastic wave-board
Lime-wall
The coverage will be affected by substrate
dimension and application method.
The loss factor as follow -
Brush= Theory coverage X1.4
Spray= Theory coverage X1.7
184 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
Description
HY-330 contains specific high content of polymer resin, and can use with difference size of quartz sand to lay out sand texture.
It is non-toxic, eco-friendly, and can be applied on both interior and exterior wall, help enriching the monotonous surface.
Use
1.Interior and exterior wall decoration.
2.Enhance the finish surface by texturizing molding.
3.Other decoration usage.
Feature
1.Water-based, eco-friendly, and non-toxic.
2.Tough, durable, with good weather resistance.
3.Can prevent surface chalking of cement.
Series Product
HY-360/ Stone Plate Texture Coating
Description
1. Tough film and good adhesion on the concrete, able to penetrate into concrete.
2. Good resistance to water , brine and chemicals. Excellent mechanical strength and physical properties.
3. Good resistance to impact and abrasion.
4. Easy application , drying fast.
Prepare to use
1. Mix base and hardener by the mixing ratio and Stir thoroughly, then setting at least 15 minutes. Thinner may be used to reduce viscosity.
2. Remove all foreign particles, oils, grease , rust and moistures from the surface before application.
3. Two packs product, must be used completely during the duration of its pot life.
4. Donâ??t apply when the temperature is < 10â??,>40â??, relative humidity is >90â?? or the surface temperature of substrate is not higher than the dew point for at least 3â??.
5. If the coating interval is exceeded , the surface of base coat must be roughened to insure adhesion.
6. Keep away from heat, sparks and flame.
7. Stored with good ventilation.
8. Keep adequate ventilation during application.
9. The actual coverage may vary, depending on application technique, job conditions and type of surface. Under brushing & rolling application the actual coverage is estimated at 70% of the Theoretical coverage and 60% for spraying.
**The parts of data base above could be affect by application condition at job site, please reference guide specification or contact with relative technical personnel.
Color : Clear
Drying time :
Tack-free : 2 hours
Hardness : 8 hours
Full cure : 7 days (grease)
DESCRIPTION
CC-604SP is two component water based epoxy primer, composed from water based of liquid epoxy resin and hardener.
APPLICATION
1. To prime the surface and help the following application procedure to mold and decorative coating.
2. Highly resist to chemicals in non-circulated places.
3. With well adhesion ability with epoxy system or PU system application.
4. Suitable for hospital, operation room, food factory to prevent the mold, dust and bacterium.
CHARATERISTIC
1. Able to be diluted by water.
2. Anti- efflorescence , suitable for the environment with highly hygienic request.
3. Good adhesion to the moisture surface, can take as the primer for solvent-free or solvent-based epoxy resin.
CS-613W is 2-component water-based premium epoxy product.
CS-613W as admixtures can improve the properties,
particularly in relation to water absorption reduction, toughness
enhancement, vibration damping and increase of the bond strength
of cement to reinforcements other than being used as admixtures,
CS-613W is used partial replacement of fine aggregate, for
coating, sealing and repairing concrete and for coating steel
reinforcing bars for corrosion protection.
AREA OF APPLICATIONS
Repair mortar for concrete areas.
Industrial flooring.
Bonding agent for new to old concrete.
As water based primer.
Can be applied with damp surface.
FEATURE
Weatherproof and waterproof of capabilities that help prevent the deterioration of the
ground-coat material.
Low odor.
Washable with water including tools. Best to wash as soon as possible before it hardens.100% water resistant when cured.
CA-010P as a water-based primer in relation to water absorption reduction and increase the bonding strength of cement to reinforcements other than being used as admixtures increase the mechanical properties and the adhesion of the hardened material.
AREA OF APPLICATIONS
Repair mortar for concrete areas
Industrial flooring
Bonding agent for new to old concrete
Enhance adhesion strength of mortar
DESCRIPTION
Bituminous Primer is product containing oxidized bitumen and a mix of technical quick
drying solvents.
APPLICATION
Bituminous Primer is recommended to block the dust and the porosity of concrete surfaces allowing the quick application o f the bituminous polymer membranes, both with flame application and cold bonding with bituminous sealants or with self adhesive membranes.Bituminous Primer allows quick film drying, has an excellent penetration and adhesion to the support for the absence of surface stickiness.
INSTRUCTIONS FOR USE
Concrete surfaces must be dry, clean and free from oil, dust or release agents.
This type of primer is ready for use after mixing it. Bituminous Primer can be either sprayed or applied by means of roller or brush. In case of hot application of membranes with flame, the primer can be used only if surfaces are completely dry. On the contrary, if the surface is damp, it is recommended to use a bituminous primer specific for damp surfaces. The drying time depends on concrete porosity, on the quantity of product applied and on the temperature of both the surface and the environment.
Usually the film gets dry after 2-4 hours from the application. The drying time can increase in case of cold temperature and with low a bsorption surfaces.
PACKING
5 gallon Bucket
SHELF LIFE
The product can be stocked in closed buckets and in dry area, far from UV rays for
12 months.
TOOL CLEANING
After use clean tools with common solvents.
DESCRIPTION
CC-600SP is a two component, solvent-free epoxy system with high chemical
resistance and high bond strength. The epoxy may be applied as a primer for most
high end industrial coatings, like Epoxies, PU.
CHARATERISTIC
Easy apply
Low odor
High bond strength
Abrasion resistant
Chemical resistant
Features
* With excellent adhesion, non-sagging and construction resistance.
* Without cracking and bulging after curing.
* Specific design for spray plastering.
* Applying by spraying machines efficiently.
* Suitable for tiling.
* Interior wall, exterior wall, panel wall and small area ceiling rendering.
Application
1. Substrate must be free from grease, mould oil, rust, rusty metal , wood peels, paints,
plastics, loose particles, contamination on any traces of foreign materials affecting the
adhesion of CS-010.
2. Moisten the substrate overnight and also at the time before the commencement of
operation.
3. Suggest to use CC-400 Concrete Bond as primer to adding adhesion for smooth
and low porous substrates.
4. CS-010 is suitable for any type of spraying machine. Mix a packet of 40KG powder
with 6.4liter of water and stir well for use. Its thickness should be maintained at
15mm and wait for 6-24 hours to apply for increasing the thickness.
Storage
Storage life is 12 months if the product is kept in a dry place.
Heavy Duty & Commercial application.
ANSI Grade 2 quality standard compliant.
3 screws for strike plate mounting.
Anti-pry shield and Anti-drill cylinder shield.
Full Lifetime Finish Warranty.
6-pin tumbler cylinder for security.
3-hour U.L. fire latch (optional).
Solid Brass latchbolt for high durability.
All metal construction for strength: 25-year mechanical warranty.
2 3/8 or 2 3/4 (60mm or 70mm) patented adjustable latch for convenience.
Fits 1 3/8 -1 3/4 (35mm-45mm) door thickness.
ANSI Grade 2 cylindrical leverset are designed for use on all standard duty grade 2 light commercial and residential applications.
Features
Heavy Duty usage & Commercial Application.
Clutch mechanism (vandal resistant) available on keyed function.
Through-bolting construction.
ASA Strike available.
ANSI Grade 2 quality standard compliant with Grade 1 features.
6-pin tumbler cylinder for security.
Limited or Full Lifetime Finish Warranty.
All metal construction for strength: 25-year mechanical warranty.
Available Latch: 2 3/8 (60mm) fixed, 2 3/4 (70mm) fixed with 3-hour U.L. fire latch.
Fits 1 3/8 -1 3/4 (35mm-45mm) door thickness.
