The RAIDON iR2623-S3 is a fault-tolerant hard disk array which is easy to install and hot-swappable allowing drives to be replaced while the power is on. It is suitable for applications such as professional workstations, file servers and as real-time backup storage systems.
The iR2623-S3â??s disk array is made up of two 3.5" hard disks, augmented by a 2.5" hard disk or SSD extractable tray with a separate SATA interface to diversify usage. The iR2623-S3 is a dual function storage device, offering data security and removable storage for on the go data transport.
Model No iR2623-S3
Interfaces 6Gbps SATA III 1 Ports ( 3.5" RAID Module ) / 6Gbps SATA III 1 Ports ( 2.5" HDD/SSD )
Compatible Drive 2 x 2.5"/3.5" SATA III (6.0 Gbits) HDD/SSD +
1 x 2.5" SATA III (6.0 Gbits) HDD/SSD
Storage Mode RAID 1 or RAID 0 ( 3.5" RAID Module ) +Independent volume( 2.5" HDD/SSD )
Operating System Windows, Linux
Function Control
Interface GUI (Windows Only)
Electrical and
Operating
Requirements * Line voltage: 12V + 5V DC
* Maximum continuous power: 60W
* Operating temperature: 32° to 104° F (0° to 40° C)
* Storage temperature: -4° to 116° F (-20° to 47° C)
* Relative humidity: 5% to 95% noncondensing
Size and Weight 148 mm (W) x 84 mm (H) x 202 mm (D) , 1.2 Kg
Product Code EAN:4711132864984
UPC:884826503668
Carton 8 pcs per carton
Package Accessories * iR2623-S3 x 1
* SATA Cable x 2
* Internal RS232 cable x 1
* External RS232 cable x 1
* Accessory kit
* Quick Installation Guide
iT2771-S3 JBOD mode could use both of 2.5" HDD/SSD products and extensively use in various storage requirement
iT2771-S3 uses our screwless tray which provides an easy use Tray Lock to protect your data. You could easily replace the defective HDD from its easy-to-use tray design even though you haven't got any experience in doing that before.
Model no. iT2771-S3
Interface SATA III 6.0 Gb/s
Support Hard Drive 2Ã?2.5â?� SATA III 6.0Gb/s HDD/SSD
RAID Level JBOD
The Largest Capacity 2TB
Power Supply SATA 15pin (12v/5v)
LED Indicators Yes
Operating System Windows, Linux
Certification CE & FCC
Packing Content Quick Installation Guide,
Accessory Kit
Dimension 102(W)Ã?26(H)Ã?147(L) mm
Operating temperature 32° to 104° F (0° to 40° C)
Storage temperature -4° to 116° F (-20° to 47° C)
Relative humidity 5% to 95% noncondensing
LR9150 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Performance
* GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy
* High sensitivity navigation engine (PVT) tracks as low as
- GPS : -165 dBm
- GLONASS : -161 dBm
* 52 track verification chann els
* SBAS (WAAS or EGNOS,MSAS)
* Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
* Tracks up to 8 CW jammers
* Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support.
* Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
* SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode.
* Reacquisition Time : 0.1 second
* RF Metal Shield for best performance in noisy environments
Hardware and Software
* Based on the high performance features of the SiRFstarV low power single core logic.
* Adaptive micropower controller
* Only 50 to 500�¼A maintains hot start capability (core logic)
* < 10mW required for TricklePower mode
* RoHS compliant (lead-free)
* SMT pads allow fully automatic assembly processes equipment and reflow soldering
* Advanced navigation features
* Smart sensor supported by I�²C interface
* External interrupt input for context change detection
Advantages
* Built-in LNA.
* Built-in internal ROM and based on Firmware 5.5.X
* It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc.
* Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity)
* Support SiRFaware technology
* Support adaptive Micro Power Controller power management mode.
* < 10mW TricklePower, so user can leave power on all day instead of power off.
* Suitable for battery drive devices that need lower power consumption application
* Cost saving through elimination of RF and board to board digital connectors
* Flexible and cost effective hardware design for different application
