Please click here to check who's online and chat with them.

Sirf V Gps/glonass Module Lr9150

Supplier From Taiwan
Nov-22-13

LR9150 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.

Performance
* GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy
* High sensitivity navigation engine (PVT) tracks as low as
- GPS : -165 dBm
- GLONASS : -161 dBm
* 52 track verification chann els
* SBAS (WAAS or EGNOS,MSAS)
* Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
* Tracks up to 8 CW jammers
* Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support.
* Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
* SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode.
* Reacquisition Time : 0.1 second
* RF Metal Shield for best performance in noisy environments

Hardware and Software
* Based on the high performance features of the SiRFstarV low power single core logic.
* Adaptive micropower controller
* Only 50 to 500�¼A maintains hot start capability (core logic)
* < 10mW required for TricklePower mode
* RoHS compliant (lead-free)
* SMT pads allow fully automatic assembly processes equipment and reflow soldering
* Advanced navigation features
* Smart sensor supported by I�²C interface
* External interrupt input for context change detection

Advantages
* Built-in LNA.
* Built-in internal ROM and based on Firmware 5.5.X
* It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc.
* Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity)
* Support SiRFaware technology
* Support adaptive Micro Power Controller power management mode.
* < 10mW TricklePower, so user can leave power on all day instead of power off.
* Suitable for battery drive devices that need lower power consumption application
* Cost saving through elimination of RF and board to board digital connectors
* Flexible and cost effective hardware design for different application

Price and Minimum Quantity

Price: Negotiable
MOQ: Not Specified

Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Sirf V Gps/glonass Module Lr9150

GOLD Member
Feb-21-25
Supplier From Busan, South Korea (Republic Of Korea)
 
We have 4sets of used Detroit generators that were used as emergency power sources (Standby only) at a municipal water drainage plant in Korea. Please review the attached documents and assess
ENGINE SPECIFICATION
ENGINE MODEL Detroit Diesel 8163-7416 1232HP
ENGINE NO. 16VF013546
RPM 1,800
Cylinder 16
Injection method Direct injection
Cooling method Water Cooled
Fuel consumption rate 246â??/h
GENERATOR SPECIFICATION (AC Generator, 3Ã??, 60Hz, Brushless type
Generator Model DIG 4800
Emergency output 990 kVA / 792 kW
Continuous output 900kVA / 720kW
Voltage and Current 600 v x 86.6 A
Revolution 1800RPM
Excitation Voltage/Current 65V/10A
Power Factor 80%
Insulation Class F
GOLD Member
VERIFIED
Jun-27-24

Electric Motors And Alternators

$180
MOQ: 10  Tons (UK)
Sample Available
Supplier From Ontario, Canada
 
Top Quality Compressor Scrap Used Electric Motor scrap AC Compressor Scrap


Drained Copper Compressor â?? Fridges/AC (RAINS per ISRI Specifications).

Our copper content on 99.97 %

Monthly Supply Capacity: 500 - 1500 metric tons,

Type: Fridges, AC.

Packaging Detail: Wood Pallets, 20(40) FCL/ According to ISRI Specification in Containers

Quantity: Between 200~500MT per month

Minimum Order acceptable 1x20FCL (25MT or 26MT/20FCL, 3000 or 3450 Pieces/20FCL



Detailed Specifications :

Compressor Brands : Necchi, Danfoss, Aspera, Ireland, Embraco

Compressor Weight : 2kg, 4kg, 6kg, 8kg, 10kg, and 12kg

More Details : 220-240 v 50 or 60 hz.

Cooling capacity: 90-190 w displ

Size : 5.99 -12.53 cm3

Purity: 99.98% copper inside with connection box

Send your message to this supplier

Main Specification:
Dec-28-11
Supplier From Hsinchu, Taiwan
VERIFIED
Jul-06-21
Supplier From Bangalore, Karnataka, India
 
Generators
VERIFIED
Oct-07-22

Power Modules

$1
MOQ: Not Specified
 
Power Modules are Point of Load (POL) DC-DC converters integrating controller chips, chokes and I/O capacitors into a single power management package for step-down(buck) applications. The low profile and compact size enables significant saving of board space, high efficiency enhances application performance, and design structure allows automated assembly by standard surface mount equipment
VERIFIED
May-20-14
 
To facilitate the clients, further we are offer authentic range of impact & environmental recorders that is used for recording varied environment conditions during transportation, storage as well operation. These recorders are assembled and incorporated with latest gps / gprs tracking module required to record any kind of impact and generate reports so as to decrease the rate of products damaging. The various environmental factors like humidity, temperature changes, till and atmospheric pressure can be recorded in this devise and can be rectified to reduce the damaging of the products. They are capable of recording shock, vibration or any environment related impact conditions and can exactly record the time duration of the mishandling. These devices are incorporated with advance triaxial piezoelectric accelerometer technology is used for recording the exact amplitude and direction of impact that enables to set certain control measures to prevent the products from damaging further.
VERIFIED
Jun-09-21

Mitsubishi Plc

$208
MOQ: Not Specified
 
MITSUBISHI PLC , ALL MODEL ARE AVAILABLE.
Mitsubishi PLC Module FX5-4AD-ADP
Mitsubishi PLC Module FX2N-2DA
Mitsubishi PLC Module FX3U-CNV-BD
Mitsubishi PLC Module FX2N-8DA
Mitsubishi PLC Module FX3U-485ADP-MB
Mitsubishi PLC Module FX3U-232ADP-MB
Mitsubishi PLC Module FX3U-ENET-ADP
Mitsubishi PLC Module FX3U-4AD-TC-ADP
Mitsubishi PLC Module FX2N-4DA
VERIFIED
Jan-29-21
Supplier From Nashik, Maharashtra, India
VERIFIED
Feb-14-23
 
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

Verification Status