Find Verified Computer Software Hardware Suppliers, Manufacturers and Wholesalers

iT2771-S3 JBOD mode could use both of 2.5" HDD/SSD products and extensively use in various storage requirement

iT2771-S3 uses our screwless tray which provides an easy use Tray Lock to protect your data. You could easily replace the defective HDD from its easy-to-use tray design even though you haven't got any experience in doing that before.

Model no. iT2771-S3
Interface SATA III 6.0 Gb/s
Support Hard Drive 22.5 SATA III 6.0Gb/s HDD/SSD
RAID Level JBOD
The Largest Capacity 2TB
Power Supply SATA 15pin (12v/5v)
LED Indicators Yes
Operating System Windows, Linux
Certification CE & FCC
Packing Content Quick Installation Guide,
Accessory Kit
Dimension 102(W)26(H)147(L) mm
Operating temperature 32to 104F (0to 40C)
Storage temperature -4to 116F (-20to 47C)
Relative humidity 5% to 95% noncondensing

The RAIDON iR2623-S3 is a fault-tolerant hard disk array which is easy to install and hot-swappable allowing drives to be replaced while the power is on. It is suitable for applications such as professional workstations, file servers and as real-time backup storage systems.

The iR2623-S3s disk array is made up of two 3.5" hard disks, augmented by a 2.5" hard disk or SSD extractable tray with a separate SATA interface to diversify usage. The iR2623-S3 is a dual function storage device, offering data security and removable storage for on the go data transport.

Model No iR2623-S3
Interfaces 6Gbps SATA III 1 Ports ( 3.5" RAID Module ) / 6Gbps SATA III 1 Ports ( 2.5" HDD/SSD )
Compatible Drive 2 x 2.5"/3.5" SATA III (6.0 Gbits) HDD/SSD +
1 x 2.5" SATA III (6.0 Gbits) HDD/SSD
Storage Mode RAID 1 or RAID 0 ( 3.5" RAID Module ) +Independent volume( 2.5" HDD/SSD )
Operating System Windows, Linux
Function Control
Interface GUI (Windows Only)
Electrical and
Operating
Requirements* Line voltage: 12V + 5V DC
* Maximum continuous power: 60W
* Operating temperature: 32to 104F (0to 40C)
* Storage temperature: -4to 116F (-20to 47C)
* Relative humidity: 5% to 95% noncondensing
Size and Weight 148 mm (W) x 84 mm (H) x 202 mm (D) , 1.2 Kg

GR8670-TB3 is built-in the easy-to-use hardware RAID, and it won't hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity.GR8670-TB3 with RAID 5 or even RAID 6 feature would be your best cost-effective storage solution at both of data protection and the system performance.

It's really easy for you to set up your new buy GR8670-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following different RAID modes, RAID 0, 1, 5, 6, 10 ,50, 60 and JBOD, to fit your needs for the available large storage space together with its data protection feature.

GR4670-TB3 is built-in the easy-to-use hardware RAID, and it won't hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity.GR4670-TB3 with RAID 5 feature would be your best cost-effective storage solution at both of data protection and the system performance.

It's really easy for you to set up your new buy GR4670-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following different RAID modes, RAID 0, 1, 5, 10 and JBOD, to fit your needs for the available large storage space together with its data protection feature.

GR3660-TB2 supports Thunderbolt 2.0 (TB2) interface for an extreme high data transfer speed. And both of the two TB2 ports are equipped with up to 20Gb/s data transfer rate which is 4 times faster than USB3.0 and even 3+ times than SATA III interfaces. You could definitely use it to play your 4Khigh-resolution films with no any lagging hassle. TB2 interface not only brings you this high data transfer rate advantage, it also let you chain maximum up to another 6 more GR3660-TB2 products (or other compatible storage products).

While using PhotoShop or Lightroom Photo Editing software, you, as a professional photographer or the hobbyist, could use your GR3660-TB2 with 2.5" SSDs to help managing your huge photo library. Your RAID 1 data protection and fast data transfer rate could definitely help could definitely help you to keep your RAW files and their finished photos.

Model No GR3660-TB2
Interfaces
Thunderbolt 2 Port x 2 ( up to 20 Gbps )
Compatible Drive 2 x 3.5" /2.5" SATA HDD/SSD ( up to 6 Gbps ) /
Support large volume up to 10TB
Storage Mode 2 x Independent ( JBOD ) / RAID 0 / RAID 1
Cooling System 4 cm Low noise fan
Operating System Windows, Linux, Mac
Electrical and
Operating
Requirements * Line voltage: 100-240V AC
* Frequency: 50Hz to 60Hz, single phase
* Operating temperature: 32° to 104° F (0° to 40° C)
* Storage temperature: -4° to 113° F (-20° to 45° C)
* Relative humidity: 5% to 95% noncondensing
Size and Weight Height: 122 mm Width: 63 mm Depth: 244 mm Weight: 1.2 kg
Product Code EANï¼?4713227440042
UPCï¼?884826504221

Carton 8 pcs per carton
Package Accessories * GR3660-TB2 Product Unit x1(Removable Tray x2)
* Thunderbolt Cable x 1
* Power Cord x1
* CD x1
* Foot Pad x4
* AC/DC Adapter x1
* Quick Installation Guide x1

GR3660-B3 is a full-featured simple and easy dual bay storage device, along with RAID 0 (Striping), RAID 1 (Mirroring), and JBOD three application modes, with Super Speed USB3.0 transmission interface, not only with fast transmission performance but also easily content data safety with 16TB large storage capacity or information exchange requirement.

GR3660-B3 internal use SATA III (6G) chip design and transform into the most easy to use USB3.0 (5G) interface, backwards compatible with USB 2.0 and USB 1.1, not only comprehensive range of usage but also leaving your data transfer without waiting to complete an instant. USB 3.0 performance will slight decrease due to maximum and fragmented data transfer mainly due to the transmission technology.

In order to allow better transmission performance, GR3660-B3 add UASP function to transfer data without waiting for previous data transfer is completed before the current transmission data movement, and improved in CPU utilization, data delay and waiting .

Model No. GR3660-B3
RAID chip JM561
Host Interface USB3.0 UASP
RAID Level RAID 1 / RAID 0 / JBOD
Support Hard Drive 2 x 2.5"-3.5" SATA III SSD/HDD (6.0 Gb/s)
Single HDD Capacity Single HDD tested up to 8TB
Rebuilding YES
LED Indicators Power / HDD Access / HDD Failed / Rebuilding / Connection Status
Fan 1 x 4cm Fan
Power Supply 12V / 4A Adaptor
Certification CE / FCC
Operating System Windowsã?�Mac & Linux
Packing Content Power Adaptor / USB 3.0 Cable / Quick Installation Guide / Accessory Kit
Dimension 120(W) x 64(L) x 220(H) mm
Net Weight 0.83Kg
HDD Capacity Single HDD tested up to 8TB RAID 0
Operating temperature 32° to 104° F (0° to 40° C)
Storage temperature -4° to 116° F (-20° to 47° C)
Relative humidity 5% to 95% noncondensing

GR8680-TB3 is built-in the easy-to-use hardware RAID, and it won't hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity. GR8680-TB3 with RAID 5 or even RAID 6 feature would be your best cost-effective storage solution at both of data protection and the system performance.

It's really easy for you to set up your new buy GR8680-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following 8 different RAID modes, RAID 0, 1, 5, 6, 10, 50, 60 and JBOD, to fit your needs for the available large storage space together with its data protection feature.

iT4300-U6 is a 4 bays internal storage solution for 5.25-inch CD-ROM. Using the JBOD function enables you to store the operating system and data file in different hard disk space. The advantage of storage distribution can help to enhance the performance of system operation.

RAIDON also delivers iT4300-U6 with only JBOD function to SAS interface, users may collocate a RAID card whenever is necessary to upgrade to a RAID storage for desired applications.

Model no. iT4300-U6
Interface SFF-8643 miniSAS 12Gbps Port
Support Hard Drive 4x 2.5 SAS/SATA HDD/SSD
RAID Level JBOD
Cooling Fan 4 cm
Power Supply 15-pin Power Connector
LED Indicators Yes
Operating System : Windows, Linux
Certification : CE & FCC
Packing Content : Quick Installation Guide�
Accessory Kit : Key�
MiniSAS 12Gbps Internal Cable
Dimension : 146(W)x 42(H) x 153(L) mm
Operating temperature ; 32 to 104 F (0 to 40 C)
Storage temperature : -4 to 116 F (-20 to 47 C)
Relative humidity : 5% to 95% noncondensing

ST2760 is a internal JBOD module, which supports two 2.5â?� SATA hard drive, you can store the operating system and data file in different hard drive or use it with a RAID card. It is designed to has the same dimension as one 3.5â?� hard drive or one floppy size, this allows you to install ST2760 in the mini-Server, Surveillance Server, 1U Server, eMail Server and POS System that has limited space. ST2760 can help you to save the problem of requiring larger capacity but with limited space.

Model No ST2760-2S-S2
Drive Bay 3.5" Floppy DriveBay
Drive Fit 2.5" SATA III HDD x 2 (9.5mm thickness)
RAID Level JBOD
Host Interface SATA III Connector (7Pin) x2
Power Supply SATA Connector (15Pin)
HDD Access Indicator LED
Color Matt Black
Structure Metal Body
Dimensions 101.7W x 147L x 25.8H(mm)
Weight 0.4(kg)
Certifications CE & FCC
Operating System
Support Windows, Linux
Packing Content Accessory Kit
HDD Capacity Single HDD tested up to 2TB
Operating temperature 32° to 104° F (0° to 40° C)
Storage temperature -4° to 116° F (-20° to 47° C)
Relative humidity 5% to 95% noncondensing

The new SafeTank GT1670-SB3 (6G) is fitted with high-speed e-SATA (6G) and USB 3.0 (5G) interfaces, offering blazingly fast transfer speeds compared to USB 2.0. In addition, the USB 3.0 model is backward compatible with USB 2.0 for users who haven't yet upgraded to USB 3.0.

The GT1670's newly designed removable drive trays can accommodate 3.5" HDDs, 2.5" SSDs, and 2.5" HDDs (supporting a range of widths including 15 / 12 / 9.5 / 9 / 7 mm) and combine the convenience of external plug and play drives with the advantages in stability offered by internal drives, enabling you to enjoy the best of both worlds and increased mobility.

Model No GT1670-SB3
Interfaces e-SATA(6G) Port , USB3.0(5G) Port
Compatible Drives 1 x 2.5â?�-3.5â?� SATA III ( 6.0 Gbits) HDD/SSD
Raid Level 1 x Independent volume (JBOD)
Operating System Windows, Linux, Mac
Electrical and Operating * Line voltage: 100-240V AC
Requirements * Frequency: 50Hz to 60Hz, single phase
* Maximum continuous power: 24W
* Operating temperature: 32° to 104° F (0° to 40° C)
* Storage temperature: -4° to 116° F (-20° to 47° C)
* Relative humidity: 5% to 95% noncondensing
Dimension (H): 131 mm (W): 50 mm (D): 224 mm Wight: 1.6 kg
Product Code EANï¼?4711132862270 UPCï¼?884826502692
Carton 10 pcs per carton
Package Accessories * GT1670-SB3
( with Removable drive tray enclosed x 1 )
* e-SATA Cable x 1
* USB3.0 Cable x 1
* Adapter x 1
* Power x 1
* Accessory kit
* User Manual x 1

RAIDON InTANK iR2770 has a patented design that allows two 2.5� SATA drives to be fitted into one 3.5� drive space! It?s equipped with optional RAID 0 to enhance the speed of transfer compare to a regular hard drive or switch to RAID 1 for an efficient and securer data backup.

Install iR2770 to the floppy or standard 3.5� hard drive slot, your system will become the one with RAID function. If you want to upgrade your system with RAID function but your system don?t have other free space. iR2770 will be the best solution you can find!

iR2770 comes with two RAIDON?s removable drive trays. It not only makes user easy to install the hard drives to iR2770, but change the failure hard drive easily.

Model No iR2770
ASIC WM6182A Chip
Device Interface SATA III 6.0 Gb/s
RAID Level RAID 0ï¼?1
Support Hard Drive 2.5� SATA III 6.0Gb/s HDD/SSD
Support Single HDD 2TB
Auto Rebuilding YES
LED Indicators YES
Power Supply SATA 22pin Interface
Operating System Windowsï¼?Linux
Certifications CE / FCC
Function Control
Interface GUI (Windows Only)
Packing Content Quick Installation Guideã?�Accessory Kit
Dimension 102WÃ?147LÃ? 26H mm
Net Weight 0.4kg
Operating temperature 32° to 104° F (0° to 40° C)
Storage temperature -4° to 116° F (-20° to 47° C)
Relative humidity 5% to 95% noncondensing

iR4300-S2 is built in the RAID features which protects your data from HDD/SSD damage. Its RAID 5 feature provides you an affordable cost in leveraging your mass data base.

iR4300-S2 provides multiple storage options. With RAID 5, a user will have the maximum protection of his/her data with allowance for a single drive failure but yet all data will be kept intact. In the RAID 0 mode, a user will have the benefit of a single massive volume for storage with high I/O speed, with sets of data being striped across the four enclosed drives.

Model no. iR4300-S2
Interface 1x SATA II (3Gbps)
Support Hard Drive 4x 2.5" SATA SSD/HDD(15mm)
RAID Level RAID 0/1/3/5/clone/JBOD
Cooling Fan 4 cm
Power Supply 15-pin Power Connector
LED Indicators Yes
System Monitoring Fan Failure / Overheat (alarm)
Operating System Windows 7 or above, Linux
Certification CE & FCC
Product Code EAN:4713227440127
UPC:884826504306
Packing Content iR4300-S2 (with removable drive tray enclosed x 4),
Quick Installation Guide, Screws & Keys, SATA Cable,
Dimension 146(W)x 42(H) x 153(L) mm
Operating temperature 32to 104F (0to 40C)
Storage temperature -4to 116F (-20to 47C)
Relative humidity 5% to 95% noncondensing
Product Code EAN:4711132864984
UPC:884826503668

iT4300-S3 is an 4 bays internal storage solution for 5.25-inch CD-ROM. Using the JBOD function enables you to store the operating system and data file in different hard disk space. The advantage of storage distribution can help to enhance the performance of system operation.

RAIDON also delivers iT4300-S3 with only JBOD function to mini SAS to 4*SATA cable, users may collocate a RAID card whenever is necessary to upgrade to a RAID storage for desired applications.

Model no.iT4300-S3
Interface miniSAS 6G TO 4 Port SATA
Support Hard Drive 4x 2.5" SATA SSD/HDD(15mm)
RAID Level JBOD
System Monitoring Fan Failure / Overheat (alarm)
The Largest Capacity 2TB
Cooling Fan 4 cm
Power Supply 15-pin Power Connector
LED Indicators Yes
Operating System Windows 7 or above, Linux
Certification CE & FCC
Product Code EAN:4711132864434
UPC:884826503576
Packing Content iT4300-S3 (with removable drive tray enclosed x 4),
Quick Installation Guide, Screws & Keys,
miniSAS 6G TO 4 Port SATA Internal Cable
Dimension 146(W)x 42(H) x 153(L) mm
Operating temperature 32 to 104 F (0 to 40 C)
Storage temperature -4 to 116 F (-20 to 47 C)
Relative humidity 5% to 95% noncondensing

iT4300-U5 is a 4 bays internal storage solution for 5.25-inch CD-ROM. Using the JBOD function enables you to store the operating system and data file in different hard disk space. The advantage of storage distribution can help to enhance the performance of system operation.

RAIDON also delivers iT4300-U5 with only JBOD function to SAS 6G interface, users may collocate a RAID card whenever is necessary to upgrade to a RAID storage for desired applications.

Model no iT4300-U5
Interface MiniSAS
Support Hard Drive 2.5" SAS / SATA HDD x 4
RAID Level JBOD
The Largest Capacity 2TB
Cooling Fan 4 cm
Power Supply 15-pin Power Connector
LED Indicators Yes
Operating System Windows, Linux
Certification CE & FCC
Packing Content Quick Installation Guideã?�Accessory
Kit Key Mini SAS 6G Internal Cable
Dimension 146(W)x 42(H) x 153(L) mm
Operating temperature 32to 104F (0to 40C)
Storage temperature -4to 116F (-20to 47C)
Relative humidity 5% to 95% noncondensing

InTANK iR2772-S3 has a patented design that allows two 2.5 SATA drives to be fitted into one 3.5 drive space! Itâ??s equipped with optional RAID 0 to enhance the speed of transfer compare to a regular hard drive or switch to RAID 1 for an efficient and securer data backup.

RAIDON iR2772-S3 internal RAID module supports SATA III 6.0 Gb/s host interface and SATA 22 pin power supply; the connectorâ??s location exactly as the same as a 3.5 hard drive. Thus, it is not necessary to install any other brackets but just install the iR2772-S3 inside to existing operating system and then the system will be upgraded as a RAID storage!

iR2772-S3 provides RS232 port, user can monitor the status of the system via their own program.

Model no. iR2772-S3
Interface SATA III 6.0 Gb/s
Support Hard Drive 22.5 SATA III 6.0Gb/s HDD/SSD
RAID Level RAID 0,1
The Largest Capacity 2TB
Power Supply SATA 15pin (12v/5v)
LED Indicators Yes
Operating System Windows, Linux
Certification CE & FCC
Function Control
Interface GUI (Windows Only)
Packing Content Quick Installation Guide,
Accessory Kit
Dimension 102(W)26(H)157(L) mm
Operating temperature 32 to 104 F (0 to 40 C)

InTANK iR2771-S3 has a patented design that allows two 2.5 SATA drives to be fitted into one 3.5 drive space! Itâ??s equipped with optional RAID 0 to enhance the speed of transfer compare to a regular hard drive or switch to RAID 1 for an efficient and securer data backup.

iR2771-S3 internal RAID module supports SATA III 6.0 Gb/s host interface and SATA 22 pin power supply; the connectorâ??s location exactly as the same as a 3.5 hard drive. Thus, it is not necessary to install any other brackets but just install the iR2771-S3 inside to existing operating system and then the system will be upgraded as a RAID storage!

Model no. iR2771-S3
Interface SATA III 6.0 Gb/s
Support Hard Drive 22.5 SATA III 6.0Gb/s HDD/SSD
RAID Level RAID 0,1
The Largest Capacity 2TB
Power Supply SATA 15pin (12v/5v)
LED Indicators Yes
Operating System Windows, Linux
Function Control
Interface GUI (Windows Only)
Certification CE & FCC
Packing Content Quick Installation Guide,
Accessory Kit
Dimension 102(W)26(H)147(L) mm
Operating temperature 32 to 104 F (0 to 40 C)
Storage temperature -4 to 116 F (-20 to 47 C)
Relative humidity 5% to 95% noncondensing
Storage temperature -4 to 116 F (-20 to 47 C)
Relative humidity 5% to 95% noncondensing

The new PD01-TB3 is equipped with 3D TLC NAND Flash via Thunderbolt 3 interface, which means users can attain up to 1600MB/s read speed with the PD01-01's Thunderbolt 3 transmission interface. Whether it is used for search and editing photo galleries, or for video editing and synthesis, it promises smooth and easy operation.

Features
1. Thunderbolt 3 Host Interface
2. Support 1TB Capacity
3.Thunderbolt 3 Cable Included
4.3D TLC NAND Flash
5. Bus Powered

iR2022 accommodates 2 of 2.5SATA III hard drive and offering both RAID 0 and RAID 1 functions . Uses the RAID 0 function to integrate the capacity of one hard drives and to enhance both read & write performance. On the other hand, uses RAID 1 function for data redundancy by mirroring data among both hard drives to prevent the event of a hard drive failure causes system shutdown.

Model No: iR2022
Interfaces: 7+15-pin SATA III (6.0Gb/s) Port
Compatible Drives: 2.5 SATA III, II, I HDD/SSD (x2)
Raid Level: RAID 0 / RAID 1
System Monitoring: Fan Failure, Overheat. HDD/SSD Failure
Cooling System: 4 cm Low Noise Fan
Operating System: Windows, Linux
Function Control Interface: GUI (Windows Only)

iR2622 is an internal (6Gbps) RAID module designed in 2 of 5.25 CD-Rom bay to satisfy the demands of SMB and industrial computing environment. With LCD tents leaving you to easily grasp HDD status.

iR2622 accommodates 2 of 2.5-3.5 SATA III hard drive and offering both RAID 0 and RAID 1 functions . Uses the RAID 0 function to integrate the capacity of two hard drives and to enhance both read & write performance. On the other hand, uses RAID 1 function for data redundancy by mirroring data among both hard drives to prevent the event of a hard drive failure causes system shutdown.

GR3680 is a High performance, low cost, large capacity supported RAID system for high definition Video/Audio post-production workflows. It supports multiple HD Video/Audio streams and it is designed specifically for professional content creation applications and features high-speed interfaces including USB3.0 (5G) and e-SATA (6G) ports.

GT4670-TB3 is built-in the easy-to-use hardware RAID, and it won't hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both of system performance and the high memory capacity. GT4670-TB3 with RAID 1 feature would be your best cost-effective storage solution at both of data protection and the system performance.

It's really easy for you to set up your new buy GT4670-TB3 in your office or even at home. Thru Marvell's MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following different RAID modes, RAID 0, 1 and JBOD, to fit your needs for the available large storage space together with its data protection feature.

Features

1.Hardware RAID that works seamlessly between Macs and PCs.

2.The GT4670-TB3 is equipped with three configuration modes to suit every need. RAID 0/1/JBOD.

3.Thunderbolt 3 (USB-C) brings you 40Gbps extreme high data transfer speed.

4.GT4670-TB3 to support 4 x 3.5" / 2.5" SATA HDD/SSD.

5.MCU function provides automatic and manual adjustment of FAN.

6.Thunderbolt3 The USB-C that does it all.

7. Support 15W ( 5V/3A ) Power Delivery.

8. Mini Displa yPort connect DVI/??HDMI/VGA display devices.

9. A stand-alone hardware RAID could let your Mac & PC work more efficiently

Features

1.Hardware RAID that works seamlessly between Macs and PCs.

2.The GR3660-TB3 is equipped with three configuration modes to suit every need. RAID 0/1/JBOD.

3. Thunderbolt and (USB-C) brings you 40Gbps extreme high data transfer speed.

4. GR3660-TB3 to support 2 x 3.5" / 2.5" SATA HDD/SSD.

5.Thunderbolt and The USB-C that does it all.

6. Support 15W ( 5V/3A ) Power Delivery.

7. Mini Display Port connect DVI/HDMI/VGA display devices.

8. Hardware RAID that works seamlessly between Macs and PCs

GR3660's built-in hardware RAID controller chipset and Thunderbolt and type c host interface, not only does it promise high transmission speed, it also eliminates the cross-platform usage issues associated with RAID 0 or RAID 1 setups. Also, with hardware RAID, all data is computed and processed by the built-in CPU. With such advantages, your computer performance can be focused on running the software and work, instead of handling the storage device's transmission issues.

Model No: GR3660-TB3
Interfaces: Thunderbolt Port x 2( up to 40 Gbps ), Support 15W (5V/3A) Power Delivering.
Mini Display Port: 1
Compatible Drive: 2 x 3.5" /2.5" SATA HDD/SSD ( up to 6 Gbps )
Storage Mode: 2 x Independent ( JBOD ) / RAID 0 / RAID 1
Cooling System: 4 cm Low noise fan
Operating System: Windows 7, Windows 10 or above, OS X 10.10 or above Electrical and Operating.
Requirements:
* Line voltage: 100-240V AC
* Frequency: 50Hz to 60Hz, single phase
* Operating temperature: 32° to 104° F (0° to 40° C)
* Storage temperature: -4° to 113° F (-20° to 45° C)
* Relative humidity: 5% to 95% noncondensing
Size and Weight Height: 122 mm Width: 63 mm Depth: 244 mm Weight: 1.2 kg
Product Code EAN:4713227440240
UPC:884826504429
Carton: 8 pcs per carton
Package Accessories:
* GR3660-TB3 Product Unit x1 (Removable Tray x2)
* Thunderbolt Cable x 1
* AC/DC Adapter x1
* Power Cable x 1
* Accessory kit
* Quick Installation Guide x1

SR2611-2S-S2R+ is an internal (6Gbps) RAID module designed in 2 of 5.25â?� CD-ROM bay to satisfy the demands of SMB and industrial computing environment. With LCD tents leaving you to easily grasp HDD status.

SR2611-2S-S2R+ accommodates 2 of 3.5 â?� SATA III hard drive and offering both RAID 0 and RAID 1 functions . Uses the RAID 0 function to integrate the capacity of two hard drives and to enhance both read & write performance. On the other hand, uses RAID 1 function for data redundancy by mirroring data among both hard drives to prevent the event of a hard drive failure causes system shutdown.

Model No SR2611-2S-S2R+
Drive Bay 2 CDRom DriveBay
Drive Fit 2.5"/3.5" SATA III HDD x 2
Host Interface SATA III Connector (7Pin)
RAID Level RAID 0 / RAID 1
Hot-Swap RAID 1
Power Supply 15 PIN Power Connector x1,
BIG 4Pin Connector x 1
Engineering
Configuration
Port RS232
Status Display LCD Display
Cooling Fan 6cm Fan
Buzzer Alarm Yes
Environment Detector Fan Failure / Overheat
Dimension & Weight 146 ( W ) x 196 ( L ) x 85 ( H ) mm / 1.3 KG
Certifications CE / FCC
Operating System Windows, Linux
Function Control
Interface GUI (Windows Only)
Packing Content SATA Cableã?�Internal RS232 Cableã?�External RS232 Cableã?�Accessory Kit
HDD Capacity Single HDD tested up to 8TB RAID 0
Operating temperature 32° to 104° F (0° to 40° C)
Storage temperature 32° to 104° F (0° to 40° C)
Relative humidity 5% to 95% noncondensing

GR5640-SB3 offers multiple host interfaces of Super-speed USB 3.1 Gen 1/eSATA and the equipped LCM enables the convenience of configuration for a desired RAID level among JBOD / RAID 5 / RAID 0 by fully taking the advantage from the largest supporting capacity up to 40TB above. GR5640-SB3 is not only giving a big storage capacity , but delivering data security and performance to various applications and environments.

NDS-102M-SYS: 1U Ultra Compact Mini-ITX Network Digital Signage Systems for Dual Mounting

AICSYS Inc engineered the NDS-102M-SYS with Mini-ITX server system application for short depth chassis The NDS-102M-SYS is an ideal platform for an almost unlimited variety of applications like cloud computing servers, Network Digital Signage System, IoT, Smart platforms or other industrial PC designs for all IT system integrators.

AICSYS Inc., the NDS-102M-SYS Chassis is an ultra-compact short 1U chassis made of heavy-duty steel, could be supported with up to 450watt power supply. NDS-102M-SYS especially designed for Mini-ITX motherboards (17cm x 17cm) with its compact short size, the chassis still remains up to (1) slot PCIe or (2) slot PCI expansions through riser card. The front panel provides (2) USB 2.0 ports and the control panel with a power ON LED indicator, a HDD activity LED indicator and a system reset button switch. AICSYS Inc, it also come with (1) 40mm system fans with space for one additional fan space for better ventilation and higher performance.

AICSYS Inc has meet the general market demand by selected those two preferable Mini-ITX motherboard to support our server system application.

MBC-6701: Support LGA1151 Intel Core i5 / i3 Intel H110 PCH, USB 3.0, SATA 3.0,
Dual LAN, VGA/HDMI and PCIe Mini Card
MBC-4506: onboard with Intel Bay Trail-D Celeron J1900, VGA/HDMI/LVDS, Dual GbE
LAN, USB3.0, PCIe Mini Card and HD Audio

The NDS-102M-SYS allows system integrator for convenient mounting and provides dual mount kit; Integrator could converted and changes the mounting type as Rackmount or Wallmount as they see fits. AICSYS Inc. also provide the custom made I/O shield service,
contact AICSYS Inc. for more details

Product Features:
-Mini-ITX motherboard: (see Product Instroduction for MBC-6701 and MBC-4506)
-EIA RS-310C 19" Standard 1U Rackmount height
-Supports upto (2) HDD with 3 selected options
(1) 3.5" and (1) 2.5" internal drive bay
(1) 3.5" or 2.5" internal drive bay and (1) slim ODD drive bay
(2) 2.5 Internal drive bays
-(2) 2.0 USB ports on front panel
-(1) 40mm ball-bearing fan with space for ne additional fan
-200W PFC Power Supply or higher efficiency
-Wallmount and Rackmount kit supported
-Custom I/O shield available

DVR Compact Chassis with 2 Drive bays and micro-ATX motherboard for Industrial Further Data Processing for 4-Slot DVR Chassis for Micro-ATX motheboard, (1) 5.25" Drive Bay, (1) 3.5" Drive Bay, (1) 8CFM Fan, and Micro-ATX power supply


337 (W) x 339.8 (D) x 136 (H) mm; 13.3 (W) x 13.4 (D) x 5.4 (H) inches