Find Verified Steel Billets Suppliers, Manufacturers and Wholesalers

Product Code Product Description

PRS-KA0552 Manual (Hand Operated) Pressure System for Lateral Pressure in Hoek Triaxial Cell

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRSGE-3800 Hydraulic Hand Pump, 700 bar.

PRSC-0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407
The manual pressure system is used for maintaining the constant lateral pressure in the Hoek triaxial cells and consists of a hydrolic hand pump with oil reservoir (PRSGE-3800), a precision LPI digital readout unit (PRS-B4920), a pressure transducer (PRSGM-0110) and a 3 m long flexible hose with quick release coupling.
The manuel pressure system is used with any Hoek triaxial cell and 2000 kN Automatic Compression Testing Machine (PRS-B4231) for the triaxial tests. Other type of PARSROS compression testing machine (respect to the capacity) can be used instead of PRS-B4231.

Technical Specifications LateralPressure Equipment PRS-B4231
Max. Working Pressure 700 bar (70 MPa) 410 bar
Dimensions 1050x500x300 mm 800x500x970 mm
Weigth (approx.) 20 kg 795 kg

Product Code Product Description

PRS-KA0550 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 220-240 V 50-60 Hz

PRS-KA0550/110 Automatic Pressure System for Lateral Pressure in Hoek Triaxial Cell, 110 V 60 Hz

PRS-B4231 2000 kN Automatic Compression Testing Machine, 220-240 V 50-60 Hz

PRS-KA0555 Hoek Triaxial Cell BX, Ã? 42,04 mm dia.

PRS-KA0557 Hoek Triaxial Cell NX, Ã? 54,74 mm dia.

PRS-KA0560 Hoek Triaxial Cell HQ, Ã? 63,5 mm dia.

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

PRS-B0210 High Precision Pressure Transducer and Electronics

STANDARDS : EN 1926, 14580; ASTM D2664, D2938, D3148, D5407

The PRS-KA0550 Automatic Pressure System is used to apply lateral pressure in the Hoek Cell during the triaxial testing of rock specimens. The power pack is equipped with a proportional valve to provide a sensitive control of the loading rate and to maintain a constant confining pressure to within 0.1 bar. Pressure is controlled by using the PID closed loop controlled electronics. The user can define the set lateral pressure and display the lateral pressure through the control and readout unit.
Control Uni is designed to control the power pack and processing of data from pressure transducers which is fitted to the power pack.
All the operations of Control Unit are controlled from the front panel consisting of a 800x480 pixel 65535 color resistive touch screen display and function keys 4 analogue channels are provided for loadcells, pressure transducers or displacement transducers.

It has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Its specimen setting sub-menu lists different specimen types including but not limited to cube, cylinder, block, beam, beam double upper bearers, cube splitting tensile, cylinder splitting tensile, paving block splitting tensile and kerb flexure. The Control Unit digital graphic display is able to draw real-time "Load vs. Time" or "Stress vs. Time" graphics.

The Control unit offers many addition unique features. You can save more than 10000 test results in its internal memory. Storage capacity can be increased up to 32 GB using SD memory cards or USB disk-drives. Control unit has support for various off-the-shelf USB printers, supporting both inkjet and laser printers. Control unit is equipped with a built-in internal camera which can save real-time video during testing for security purposes. Thanks to its built-in internet protocol suite, every aspect of control unit device can be controlled remotely from anywhere around the world. Last but not the least, It has support for Android tablets permitting to control and monitor your testing equipment remotely.

Product Code Product Description

PRS-KA0580 Digital Point Load Tester

The PRS-KA0580 Digital Point Load Tester is used to determine the strength values of a rock specimen both in the field and in the laboratory.

It consists of a load frame for applying loads up to 56 KN, on which a manual hydraulic jack is mounted. The instrument accepts core specimens up to (101,6 mm) diameter which are loaded by two coneshaped points.
A graduated scale indicates the distance between the conical points.

The applied load is measured by a high precision electric load cell with a digital display unit range 0-56kN proving:
- 65.000 divisions
- 0,001 kN resolution
- Linearity: 0,05%
- Hysteresis: 0,03%

Product Code Product Description

PRS-ZE0250 Plastic Limit Test Set

PRS-ZE0252 Plastic Limit Reference Rod Ã? 3x100 mm

PRS-ZE0254 Plastic Limit Plate 300x300x5 mm, Glass

PRSGH-1433 Porcelain dish, 120 mm dia.

PRSGG-2170 Moisture content tin with lid, Aluminum, Ã?:75 mm h:30

PRSGH-1495 Spatula, small, length:120 mm

STANDARDS : ASTM D4318; AASHTO T90; BS 1377:2; UNE 103-104; UNI 10014

The plastic limit (PL) is defined as the lowest moisture content of a soil that will permit a sample to be rolled into threads of 3 mm diameter without the threads breaking.

The Plastic Limit Test Set is supplied complete with
Glass Plate, 300x300x5 mm
Steel Reference Rod
Moisture Content Tins, Ã?:75 mm h:30, 6 pcs.
Porcelain Mixing Dish, 120 mm dia.
Spatula, 120mm
Carrying Case

Dimensions 360x370x180 mm

Weight (approx.) 3 kg

Product Code Product Description

PRS-CM0090 Jolting Table, EN, 220-240 V 50 Hz, (60 Hz version is available upon request)

PRS-CM0091 Jolting Table with Soundproof Safety Cabinet, EN, 220-240 V 50 Hz

PRS-CM0092 Three Gang Mould for 40x40x160 mm

PRS-CM0093 Feed Hopper 40x40x160 mm for PRS-CM0092

PRS-CM0094 Short and Long Spreaders and Straightedge, for PRS-CM0092

STANDARDS : EN 196-1; ISO 679
Jolting Table is used for compacting of cement specimens in 40x40x160 mm mould and consists of mould table seated on a rotating cam driven at 60 r.p.m. The falling height is 15 mm conforming to EN 196-1. The machine is equipped with a counter which provides automatic shut off at end of preset drop numbers.

Weight and dimensions of the jolting table fully comply with the requirements of EN 196-1 standard. When used with PRS-CM0092 Three Gang Mould and PRS-CM0093 Feed Hopper, the total weight of the moving part is 20 kg ± 0.5 kg. Without PRS-CM0092 and PRS-CM0093 the weight of the moving parts is 6.85 kg. Rapid mould lock and release system allows easy and quick operation.

The supporting frame of the machine has been designed to ensure precise dimensions, table flatness, correct centering of the three gang mould on the table.

The motor and gearbox assembly is enclosed in a protective housing, which promotes user safety (the moving parts are inaccessible) and long life for the gearbox.

The standard model can be supplied with a safety/noise reduction cabinet. The cabinet is lined internally with soundproofing material to reduce sound level conforming to CE directives.

PRS-CM0093 Feed Hopper is used for filling PRS-CM0092 Three Gang Moulds placed on the Jolting Table.

PRS-CM0092 Three Gang Mould, PRS-CM0093 Feed Hopper, PRS-CM0094 Short and Long Spreaders and Straightedge should be ordered separately.

Product Code PRS-CM0090 PRS-CM0091

Dimensions 1050x350x500 mm 1440Ã?500Ã?575 mm

Weight (approx.) 55 kg 125 kg

Motor Speed 60 r.p.m

Drop Height 15 mm

Power 250 W

Product Code Product Description

PRS-CM6700 250 kN Cement Compression Frame

PRS-CM6710 15/250 kN Cement Flexure/Compression Frame

STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349;BS 3892-1, 4551-1

The PRS-CM6700 and PRS-CM6710 , very rigid two column frames have been designed for compression and/or flexure testing of mortar prisms and cubes specimens. Load cells are used on both frames to provide high accuracy in load measuring. Both frames are fitted with round platens with 165 mm diameter and these should be used together with suitable flexure and compression devices.

Distance pieces and transparent front-rear safety doors (should be factory insttalled ) should be ordered separately.


Distance Pieces for Frame

Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the distance between platens.
Distance Pieces

PRS-CM4630 Distance piece dia. 165 mm x 15 mm
PRS-CM4631 Distance piece dia. 165 mm x 30 mm
PRS-CM4633 Distance piece dia. 165 mm x 50 mm
PRS-CM4634 Distance piece dia. 165 mm x 90 mm

Platens

PRS-CM0116 Upper Loading Platen with Ball Seating Assembly Ã?:165 mm and Lower Loading Platen, Ã?:165 mm

Manufactured from high quality steel are hardened (more than HRC 53), smoothed and finished.

The roughness value for the surface texture of machine and auxiliary platens are 3.2 μm.

Loading Cylinder Assembly & Limit Switch

All frames have a single acting up stroking ram. The diameter of piston changes with regard to the capacity.
The maximum ram stroke is 50 mm, a limit switch is fitted to prevent over travel of the ram which cuts the power to the pump.
There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder.

Accessories

PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms, ASTM

PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN

PRS-CM0121/A Compression Jig Assembly to test 50 mm (2â?�) mortar cubes, ASTM

PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN

Product Code Product Description

PRS-ASKW00126 Kinematic Viscosity Apparatus

STANDARDS : ASTM 2170,AASHTO T201,EN 12595
The temperature, from room temperature to 135°C, remains constant within ± 0.1°C. Electric stirrer, electric heater and cooling (COIL) system. Digital read-out and regulation of temperature. Safety device for temperature and water level with alarms. 19 litre bath in pyrex glass with external protection in plexiglass. Support base with housing seats.
Capacity: Five viscometers to be ordered separately according to viscosity.

Dimensions 300 x 300 x 500 (h) mm.
Power supply 220 V, 50 Hz, single phase, 1700 Watts
Weight 12 kg.

PRS-A0445 : Shape Index Caliper

Shape Index Caliper is used for the determination of the shape factor of aggregates. Measurement range is 200 mm and graduated with 0.05 mm increments.

Dimensions : 450x150x50 mm
Weight (approx.) : 0,4 kg

Product Code Product Description

PRS-A0440 Efflux Index Apparatus (Flow Coefficient of Fine Aggregates), EN

PRS-A0440 Efflux Index (Flow Coefficient of Fine Aggregates) Apparatus is used to obtain information about the shape and the angularity of grains of fine aggregates.

The flow coefficient of an aggregate is the time, expressed in seconds, for a specified volume of aggregate to flow through a given opening, under specified conditions using a standard apparatus.

Efflux Index (Flow Coefficient of Fine Aggregates) Apparatus consist of two funnels with different opening, cylindrical hopper, metal stand with a shutter and metal container.

Dimensions 150x180x410 mm

Weight (approx.) 5 kg

Sieve Test Set

PRS-B0518 Sleve Segregation Test Set

PRSG-4PC0050/Y Sieve Ã? 300x75 mm 5 mm Square Aperture

PRSG-4002/Y Pan Ã? 300x75 mm

STANDARDS : EN 12350-11
The PRS-B0518 Sieve Segregation Test Set is used for determining the resistance to sieve segregation of Self Compacting Concrete. The Sieve has 5 mm square apertures with a frame diameter of 300 mm conforming to ISO 3310-2 standard. Supplied complete with a Pan.

Dimensions 350x350x250 mm

Weight (approx.) 2,5 kg

Microscope For Cracks On Concrete

Product Code Product Description
PRS-BCM Microscope For Cracks On Concrete

It is used for determining the cracks on concrete; Adjustable lighting system
Sensitive measurement ( 10 mm / 0.001 mm )
Focusing system

L Shape Box Apparatus

Product Code Product Description

PRS-B0545 L Shape Box Apparatus

STANDARDS : EN 12350-9

The PRS-B0545 L Shape Box is used for determining the passing ability rate of freshly mixed self compacting concrete.

The distance between 12 mm diameter bars can be set between 41±1 mm or 59±1 mm.

L Shape Box is designed for ease of cleaning the vertical and horizontal hoppers.

The L Shape Box Apparatus is supplied complete with;
Filling Hopper
Base

Dimensions 300x1000x1350 mm
Weight (approx.) 35 kg

Product Code Product Description

PRS-ZE0950 Sand Cone Set 6.5"

PRS-ZE0960 Sand Cone Set 12"

PRS-ZE0952 Plastic Sand Jar 5 L, for PRS-ZE0950

PRS-ZE0962 Density Cylinder, 12"

STANDARDS : ASTM D1556; AASHTO T181, T191

The PRS-ZE0950 and PRS-ZE0960 Sand Cone Sets are used for the determination of the degree of compaction on site. PRS-ZE0950 includes double cone, plastic sand jar and metal tray with flanged hole.

PRS-ZE0962 Density Cylinder is used for determining in place density of compacted base courses containing large sizes of coarse aggregates.

Product Code Dimensions Weight (approx.)
PRS-ZE0950 300x300x550 mm 4 kg
PRS-ZE0960 600x600x650 mm 15 kg
PRS-ZE0962 470x320x260 mm 10 kg

Product Code Product Description

PRS-ZE000035 Hydraulic Sample Extruder

PARSROS Hydarulic Sample Extruder is used for a smooth and rapid extrusion of soil samples from tubes also of thin walls with minimum disturbance. The unit extrudes samples from dia. 35 up to 101,6 mm with max. stroke of 900 mm.
The hydraulic piston is equipped of speed adjuster and can be stopped in any excursionâ??s position.

The extruded sample is held in place by a receiving table adjustable in height and easily lowered along side the machine to save space.

Complete with adaptors (ring + tamper) to extrude samples having dia. 38, 83, 100 mm

Max. load 30 kN

Dimensions (working position): 2741 x 635 xh 1200 mm

Power supply 220-240 V 1ph 50/60 Hz 1300 W

Weight: 160 kg

Product Code Product Description

PRS-ZE0965 Surface Soil Sampler (Core Cutter), 3â?� dia. ASTM

PRS-ZE0966 Spare Sampling Tube (Drive Cylinder), 3â?� (76.2 mm) x 70 mm high, ASTM, for PRS-ZE0965

PRS-ZE0967 Surface Soil Sampler (Core Cutter), 4â?� dia. ASTM

PRS-ZE0968 Spare Sampling Tube (Drive Cylinder), 4â?� (101.6 mm) x 127 mm high, ASTM, for PRS-ZE0967

PRS-ZE0970 Surface Soil Sampler (Core Cutter) Set, 100 mm dia., BS

PRS-ZE0975 Surface Soil Sampler (Core Cutter) Set, 150 mm dia., BS

STANDARDS : ASTM D2937; CNR No.22; BS 1377:9

Surface Soil Sampler (Core Cutter) is used to determine the insitu density of soil by taking a standard volume of soil sample from the ground which is then removed, trimmed and weighed.

The ASTM/CNR version, PRS-ZE0965 and PRS-ZE0967 Surface Soil Sampler (Core Cutter) consists of a drive head, 5 kg drive hammer and a thin wall sampling tube. 5 kg sliding weight drop hammer makes a free-fall on to the driving head which is placed on top of the sampling tube. Manufactured from steel and plated for corrosion resistance.

PRS-ZE0970 BS Type 100 mm Surface Soil Sampler (Core Cutter) Set consists of a driving dolly, 13,5 kg driving rammer and 100 mm dia. x 130 mm high core cutter. PRS-ZE0975 BS Type 150 mm Surface Soil Sampler (Core Cutter) Set BS consits of a driving dolly, 16 kg driving rammer and 150 mm diax 180 mm high core cutter.

Product Code Product Description

PRS-ZE0170 Mechanical End-Over-End Shaker, 220-240 V 50-60 Hz

PRS-ZE0170 /110 Mechanical End-Over-End Shaker, 110 V 60 Hz

PRS-ZE01701 Gas Jar for PRS-ZE0170

The PRS-ZE0170 Mechanical End-Over-End Shaker is used for the determination of the particle density by the gas jar method and the particle size distribution by sedimentation.

End-Over-End Shaker is used to rotate two 1 L gas jars with rubber cover at approx. 50 rpm.
The 1 L capacity Gas Jar is made of plexiglass and supplied complete with Rubber Cover .

PRS-ZE0171cGas Jar should be ordered separately.

Product Code Dimensions Weight (approx.) Power

PRS-ZE0170 900x700x600 mm 21 kg 180 W

PRS-ZE0171 120X120X270 mm 0.6 kg

Product Code Product Description

PRS-ZE0630 Vibratory Compactor Set, 220-240 V 50 Hz

PRS-ZE0750 CBR Type Mould BS (modified proctor) Vibrating Hammer Mould EN

PRS-ZE0768 C Spanner for PRS-ZE0750, 2 pcs

PRS-ZE0770 Assembly Tool for Base Plate for PRS-ZE0750

STANDARDS: EN 13286-4; BS 1377:4 / EN 12697-9, 12697-10, 12697-32

The PRS-ZE0750 Vibratory Compactor Set is used to prepare the test specimens of road base and sub base materials by using the vibratory compaction technique. The specimens prepared from road base and sub base materials is used for the proctor and CBR tests.

The set is also used for preparing the test specimens of bituminous mixtures
PRS-ZE0750 mould with base plate and extension collar should be ordered separately and also when ordering PRS-ZE0750, PRS-ZE0768 and PRS-ZE0770 should be ordered separately for assembling and dissambling.

The Vibratory Compactor Set is supplied complete with;

Vibrating Hammer
Supporting Frame
Small Tamping Foot, 102 mm dia.
Large Tamping Foot, 146 mm dia.
Shank, 300 mm

Dimensions 510x300x1120 mm

Weight (approx.) 75 kg (complete set)

Power 1150 W (vibrating hammer)

Product Code Product Description

PRS-ZE0270 Hydrometer Test Set

PRS-ZE0272 Soil Dispersion Mixer, 220-240 V 50-60 Hz

PRS-ZE0273 Hydrometer Bath, 220-240 V 50-60 Hz

PRS-ZE0274 Hydrometer 151H

PRS-ZE0275 Hydrometer 152H

PRS-ZE0276 Hydrometer Jars, 1000 ml

PRSGC-0900 Sodium Hexametaphosphate, 1kg

STANDARDS : ASTM D422; AASHTO T88

Hydrometer Test Set is used to determine the particle size distribution of very fine materials such as silt and clay.
The soil dispersion mixer for hydrometer test method, operates at over 13,000 r.p.m, includes dispersion cup, stirring paddle, automatic switch-on by positioning bowl, 100 W power consumption
The hydrometer bath, circulation unit, ambient to 35°C working temperature, 50 L capacity tank with 8 pcs. sedimentation cylinder capacity.

152H Hydrometer should be ordered separately.

The Hydrometer Test Set is supplied complete with;
Dispersion mixer
Hydrometer bath
Hydrometer, 151H, 1pcs.
Sodium hexametaphosphate 1 kg,
Sedimentation cylinder, 1000 ml, 6 pcs.
Heater,
Circulation unit
Rubber stopper for sedimentation cylinder
Beaker, 600 cc

151 H Hydrometer 11 â?? Length 0,995-1,038 g/ml Ä°n 0,001 g/ml division

152H Hidrometre 11â?� Lenght 5 - 60 g/L in 1g/L Ä°n 1g/L division

Dimensions 330x630x450 mm

Weight (approx.) 20 kg

Product Code Product Description

PRS-ZE0024 Hand Operated Auger Boring Set

PRS-ZE0026 Extension Rod for PRS-ZE0024 , 1 meter

PRS-ZE0024 Hand Boring and Sampling Set for augering down to a depth of 5 meters.
The PRS-ZE0024 Hand Operated Auger Boring Set consists of a T-Handle with 1 m Rod, 80 mm, 100 mm and 150 mm diameter Auger Heads.

Extension rods should be ordered separately.

Dimensions 1100x200x200 mm

Weigth (approx.) 5 kg

Product Code Product Description

PRS-ZETBS Hand Auger Set

Hand auger equipment is extremely suitable for soil research. A comprehensive set for augering all types of soil down to a depth of 5 meters.

The set comprises 4 edelman augers of various types has one for each of them ; riverside auger ( 8 cm diam), auger for stony ground, spiral auger, suction auger, bailer, gouge auger with bent spatula and the normal handle and extension pieces.

Also they have a sounding device on efor each of them ; 5 meters measuring tape, a paire of gloves, nylon headed hammer, brush, shovel and complete in an hammock transport case (1150x150x300 mm) with zip fastener.