We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
We supply Flanges & Fittings of our principle from Italy, France, Spain, Germany, Japan and Thailand. These are all API 6A-0388, API 16A-0097 and API 17D-0018 approved materials which are mostly used in the Oil & Gas industry. We can also supply a wide range of Gaskets, Insulation gasket kits and Stud Bolts from reputed manufacturers in Europe who are API and ISO certified.
Steel plates is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces.
Its chemical composition is homogeneous and stable with about Fe 98%, Mn 0.99%, Cu 0.45%, Ni 0.18%, Cr. 0.06%
The max weight of each pieces is up to 1 ton.
The material can be loaded loose in 20 heavy duty container.
Product Name Seamless Carton Steel Pipe
Grade Q235 = S235 / A53 Grade B / A500 Grade A / STK400 / SS400 / ST422 Q345 = S355JR /
A500 Grade B Grade C Q355,45#ï¼?40#
Length 5.8~12.0 m or as customized
Surface Treatment Prime quality (bared, oiled, color paint, 3LPE, or other anti-corrosive treatment)
Inspection With Chemical Composition and Mechanical Properties AnalysisDimensional and Visual
Inspection, also with Nondestructive Inspection.
905 Stainless Steel Flange Suppliers
Short on time? Let Stainless Steel Flange sellers contact you.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.
Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.
We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.
The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
Autoenterprises caliper division was launched in 1999 as part of the company founding, and has since then grown to be one of our largest product lines, with over 600,000 calipers on stock at any time. We hold a full range of calipers for any kind of vehicle - passenger car, commercial and heavy-commercial - covering a wide variety of manufacturers, makes and models.
The divisions 7 man team is headed by John Collins (Jnr.), who oversees the constant searching, buying, trading and sorting of parts that enables us to maintain an accurate, detailed and up-to-date stock list. Our carefully administered database allows us to rapidly break-down stock by any criterion, for example by casting number or manufacturer, down to minute details such as piston diameter. We also keep comprehensive records of customer reference numbers, allowing us to respond even faster to enquiries from returning customers.
Our meticulous quality control process ensures that the calipers we supply are always of a high-quality, re-manufacturable condition.
Product stocked at: Basildon branch.
Closest Airport: All London airports within easy reach.
Robust, reliable and rust-resistant, our galvanised steel sheet is just the job when weather-proofing is a must. With its tough coating of zinc carbonate, it's designed to withstand the most extreme of the elements and last for a very long time. From walls to washing machines, the scope for our best-selling metal is endless.
Tight Head or Open Head Steel Drums Available and can be customised to meet your requirements.
* Tight Head drums have a triple seam construction (7 layers of steel) with a vertical seam electrically welded.
* Superior vacuum resistance.
* Open Head drums have completely removable lids and a triple seam safety factor with several locking band alternatives.
* Many large steel drums can be reconditioned and reused several times before being recycled.
* Fully customisable size 55+ gallons (208+ nominal litres), lined, various closures and fittings available.
* Various colour and product decoration options are also available.
Galvanized steel coils are steel coils that have been coated with a layer of zinc to protect the steel from corrosion This process is known as galvanization These coils are widely used in various industries including construction automotive and manufacturing due to their durability resistance to rust and versatility The zinc coating provides a protective barrier that helps prevent corrosion and increases the lifespan of the steel
HS Code
The Harmonized System HS code for galvanized steel coils typically falls under the following classification
HS Code 7210 Flatrolled products of iron or nonalloy steel galvanized or plated with zinc
Subcategories
721011 Hotrolled galvanized steel
721012 Coldrolled galvanized steel
721030 Other galvanized steel products
Specifications
Material Hotrolled or coldrolled steel
Coating Type Zinc coating galvanized
Coil Weight Typically ranges from 1000 kg to 10000 kg
Coil Width 600 mm to 1500 mm depending on customer requirements
Thickness 02 mm to 30 mm
Zinc Coating Weight Measured in gm typically ranging from 60 gm to 275 gm higher zinc coating for more corrosion resistance
Surface Finish Bright spangled or nonspangled depending on the galvanization process
Edge Type Mill edge slit edge or trimmed edge
Product Standard
The quality and performance of galvanized steel coils are governed by international and national standards Common standards include
ASTM A653A653M Standard specification for steel sheet zinccoated galvanized by the hotdip process
JIS G3302 Japanese Industrial Standard for hotdip galvanized steel sheets
EN 10346 European standard for continuously hotdip coated steel flat products
ISO 3575 International standard for continuously hotdip galvanized steel sheets
CIF Seafright from the UK to ASWP
First shipment containers quantity 300MT up to 50,000MT/ Month
Price 240 USD
Origin United Kingdom
Shipment Bulk/ Paletazied in a sea container
SGS or Equivalent at loading port
HMS1 Steel Scrap of ISRI code 201.202
HMS2 Steel Scrap of ISRI code 203
TT or 100% LC, Transferable, Irrevocable, Divisible auto revolving at sight
Bill of lading
Commercial Invoice
Certificate of Origin
Certificate of quality and quantity issued by SGS
HMS available for immediate shipping
We can tailor drum sizes to meet your specific requirements and use case.
* From 12 litre (3 gallon) up to 160 litres (42 gallon) capacity.
* Tight Head, Open Head, Composite options available.
* Thicknesses according to specification.
* UN Solid and Liquid ratings available.
* Plain or internally lacquered with epoxy, phenolic etc.
* Stainless Steel Options also available.
Autoenterprises introduced a steering pump division in 2004, and now stocks around 100,000 hydraulic and electric pumps for all types of vehicles, covering all manufacturers.
Detailed records are made for every unit in our database which has accumulated a depth of customer cross-reference numbers, further increasing the accuracy with which we identify and sort incoming parts, as well as the speed with which we can source and supply to our customers.
Product stocked at: Basildon branch.
Closest Airport: All London airports within easy reach.
Relatively new to our product range, Autoenterprises has begun establishing a footprint in the growing market for steering columns, and with around 2,000 units on stock, we have already catalogued over 100 unique parts, amassing a foundation of OE and after-market reference numbers, product photos and vehicle application data.
As the product-line matures and their use grows ever more widespread, we will push hard to build upon our growing expertise and emerge as a leader in the developing market for used core steering columns.
Product stocked at: Basildon branch.
Closest Airport: All London airports within easy reach.
Organic Compound Fertilizer is a premium fertilizer produced from organic materials enriched with balanced plant nutrients. It improves soil fertility, enhances microbial activity, increases water retention, and promotes healthy plant growth. Suitable for vegetables, fruits, cereals, plantations, horticulture, and organic farming.
Potassium Sulphate (SOP) is a premium chloride-free potassium fertilizer containing high potassium and sulfur, ideal for fruits, vegetables, tobacco, potatoes, tea, grapes, and other chloride-sensitive crops. It enhances crop quality, improves color, taste, shelf life, and supports healthy plant growth.
Specifications:
Potassium Oxide (KO): 50 - 52% Min
Sulfur (S): 17 - 18%
Appearance : White Granules or Powder
Grade: Fertilizer Grade
NPK Water Soluble Fertilizer is a premium fully water-soluble fertilizer designed for fertigation, drip irrigation, foliar application, hydroponics, and greenhouse cultivation. It provides balanced nutrition with fast nutrient absorption, promoting vigorous plant growth, improved flowering, higher yields, and better crop quality
Available Grades:
20-20-20, 19-19-19, 15-15-30, 13-40-13, 10-52-10, 30-10-10 and customized NPK formulations.
NPK Compound Fertilizer is a premium balanced fertilizer containing nitrogen (N), phosphorus (P), and potassium (K) in compound granules. It is suitable for cereals, vegetables, fruits, plantations, and horticultural crops. The product provides balanced nutrition, promotes healthy root development, enhances plant growth, and improves crop yield and quality.
Available Grades:
15-15-15, 16-16-16, 17-17-17, 20-10-10, 10-20-20, 12-12-17+2MgO, and customized NPK formulations.
905 Stainless Steel Flange Suppliers
Short on time? Let Stainless Steel Flange sellers contact you.
