Find Verified Stainless Steel Bars Suppliers, Manufacturers and Wholesalers

Super Invar 32-5 Round Bars are premium low thermal expansion alloy bars manufactured from UNS K93500 material for applications requiring exceptional dimensional stability and precision. Composed primarily of nickel, cobalt, and iron, Super Invar 32-5 offers an extremely low coefficient of thermal expansion while maintaining excellent strength, machinability, and stability over a wide temperature range. These bars are widely used in aerospace, precision instruments, optical systems, laser equipment, semiconductor manufacturing, metrology, and defense industries. Available in round, flat, square, rectangular, hexagonal, and hollow bar forms, our Super Invar 32-5 Round Bars are precision manufactured to meet stringent international quality standards.

Grade: Super Invar 32-5 Round Bar

Square bar size : 4 to 100mm

Hollow Bar : 32mm OD x 16mm ID to 250mm OD x 200mm ID)

Hex Bar size : 2-100mm A/F

Rectangles Size : 33 x 30mm to 295 x 1066mm

Flat bar size : Thickness: 2 -100mm, Width: 10 to 500mm

Round bar size : Diameter: 3-~800mm

Surface: Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clientsâ?? requirements

Technique : Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Condition : Hardened & tempered, annealed

Finish : Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Processing : Bar cutting to 650mm

Super Invar 32-5 Round Bars Equivalent Grades

STANDARD: Super Invar 32-5
UNS: K93500

Permendur 2V Round Bars are premium cobalt-iron alloy bars engineered for applications requiring exceptionally high magnetic saturation, superior magnetic permeability, and excellent mechanical strength. Manufactured from UNS R30005 alloy, these bars offer outstanding performance in high-temperature and demanding industrial environments. They are widely used in aerospace, electrical engineering, defense, medical equipment, generators, transformers, magnetic bearings, and electromagnetic devices. Available in round, flat, square, rectangular, hexagonal, and hollow bar forms, our Permendur 2V Round Bars are produced with precise dimensional accuracy, excellent surface finish, and strict quality control to ensure reliable performance.

Grade: Permendur 2V Square Bars

Square bar size : 4 to 100mm

Hollow Bar : 32mm OD x 16mm ID to 250mm OD x 200mm ID)

Hex Bar size : 2-100mm A/F

Rectangles Size : 33 x 30mm to 295 x 1066mm

Flat bar size : Thickness: 2 -100mm, Width: 10 to 500mm

Round bar size : Diameter: 3-~800mm

Surface: Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clientsâ?? requirements

Technique : Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Condition : Hardened & tempered, annealed

Finish : Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Processing : Bar cutting to 650mm

RENE 41 Round Bars are high-performance nickel-based superalloy bars manufactured from UNS N07041 / N08041 material for applications requiring exceptional strength, oxidation resistance, and creep resistance at elevated temperatures. These bars are age-hardenable and maintain superior mechanical properties under continuous thermal exposure, making them ideal for aerospace, gas turbine, defense, power generation, and high-temperature industrial applications. Available in round, square, flat, hexagonal, rectangular, and hollow bar forms, our RENE 41 Round Bars are precision manufactured with strict quality control to ensure excellent dimensional accuracy, superior surface finish, and reliable long-term performance.

Grade: RENE 41 Round Bar

Square bar size : 4 to 100mm

Hollow Bar : 32mm OD x 16mm ID to 250mm OD x 200mm ID)

Hex Bar size : 2-100mm A/F

Rectangles Size : 33 x 30mm to 295 x 1066mm

Flat bar size : Thickness: 2 -100mm, Width: 10 to 500mm

Round bar size : Diameter: 3-~800mm

Surface: Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clientsâ?? requirements

Technique : Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Condition : Hardened & tempered, annealed

Finish : Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Processing : Bar cutting to 650mm

RENE 41 Round Bars Equivalent Grades

STANDARD: RENE 41
Material No: 2.4973
UNS: N07041 / N08041

HY-MU 80 Round Bars are premium nickel-iron soft magnetic alloy bars manufactured from UNS N14080 material for applications requiring exceptionally high magnetic permeability, low coercive force, and minimal core losses. These precision-engineered bars provide excellent magnetic shielding, outstanding electrical performance, and superior dimensional stability. HY-MU 80 Round Bars are widely used in transformers, magnetic cores, MRI equipment, electronic devices, aerospace components, telecommunications, defense systems, and precision electrical instruments. Available in round, flat, square, hexagonal, rectangular, and hollow bar forms, our HY-MU 80 bars are manufactured with strict quality control to ensure consistent performance and reliable service life.

Grade: Hy Mu 80 Round Bar

Square bar size : 4 to 100mm

Hollow Bar : 32mm OD x 16mm ID to 250mm OD x 200mm ID)

Hex Bar size : 2-100mm A/F

Rectangles Size : 33 x 30mm to 295 x 1066mm

Flat bar size : Thickness: 2 -100mm, Width: 10 to 500mm

Round bar size : Diameter: 3-~800mm

Surface: Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients requirements

Technique : Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Condition : Hardened & tempered, annealed

Finish : Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Processing : Bar cutting to 650mm

Hy Mu 80 Round Bars Equivalent Grades

STANDARD: HY-MU 80 Alloy
UNS: N14080

Kovar Round Bars are precision-engineered iron-nickel-cobalt alloy bars manufactured to deliver exceptional dimensional stability and a controlled coefficient of thermal expansion. Conforming to UNS K94610 and Material No. 1.3981, these round bars are widely used in applications requiring reliable glass-to-metal and ceramic-to-metal sealing. Their excellent thermal compatibility, good mechanical strength, and stable electrical properties make them suitable for aerospace, electronics, semiconductor, telecommunications, and defense industries.

Manufactured using premium-quality raw materials and advanced production techniques, our Kovar Round Bars are available in round, flat, square, hexagonal, rectangular, and custom profiles with hot rolled, cold drawn, forged, or polished finishes. Every bar undergoes stringent quality inspections to ensure dimensional accuracy, superior surface finish, and consistent performance under demanding operating conditions.

Grade : Kovar Round Bar
Square bar size : 4 to 100mm

Hollow Bar : 32mm OD x 16mm ID to 250mm OD x 200mm ID)

Hex Bar size : 2-100mm A/F

Rectangles Size : 33 x 30mm to 295 x 1066mm

Flat bar size : Thickness: 2 -100mm, Width: 10 to 500mm

Round bar size : Diameter : 3- 800mm

Surface: Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients requirements

Technique : Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Condition : Hardened & tempered, annealed

Finish : Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Processing : Bar cutting to 650mm

Kovar Round Bars Equivalent Grades

STANDARD: Kovar
Material No: 1.3981
UNS: K94610

Invar 36 Round Bars are manufactured from premium nickel-iron alloy containing approximately 36% nickel, offering an exceptionally low coefficient of thermal expansion and outstanding dimensional stability. Manufactured in accordance with UNS K90600, UNS K90603, K93050, and Material No. 1.3912 specifications, these round bars are ideal for precision engineering, cryogenic equipment, aerospace tooling, measuring instruments, semiconductor equipment, optical devices, and scientific applications.

Stainless Steel Impex manufactures Invar 36 Round Bars using advanced production techniques and rigorous quality control procedures to ensure excellent mechanical strength, superior machinability, and precise dimensional accuracy. Available in round, flat, square, hexagonal, rectangular, hollow, and threaded profiles, our bars are supplied in hot rolled, cold drawn, forged, polished, and bright finishes to meet diverse industrial requirements. Every product is thoroughly inspected for chemical composition, mechanical properties, and dimensional tolerances before dispatch.

Grade: Invar 36 Round Bar

Square bar size : 4 to 100mm

Hollow Bar : 32mm OD x 16mm ID to 250mm OD x 200mm ID)

Hex Bar size : 2-100mm A/F

Rectangles Size : 33 x 30mm to 295 x 1066mm

Flat bar size : Thickness: 2 -100mm, Width: 10 to 500mm

Round bar size : Diameter: 3-800mm

Surface: Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients requirements

Technique : Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Condition : Hardened & tempered, annealed

Finish : Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Processing : Bar cutting to 650mm

Invar 36 Round Bars Equivalent Grades

STANDARD: Invar 36
Material No: 1.3912
UNS: UNS-K90600 / K90603 / K-93050
EN Designation: Ni 36
Alloy: 36

Invar 42 Round Bars are precision-manufactured from a controlled expansion nickel-iron alloy containing approximately 42% nickel, offering exceptional dimensional stability and a low coefficient of thermal expansion. Manufactured in accordance with UNS K94100 and Material No. 1.3917 specifications, these round bars are widely used in glass-to-metal sealing applications, aerospace tooling, electronics, optical instruments, transformers, semiconductor components, and precision engineering industries.

Stainless Steel Impex manufactures Invar 42 Round Bars using premium-grade raw materials and advanced production processes to ensure outstanding dimensional accuracy, superior mechanical strength, excellent corrosion resistance, and reliable performance. Our bars are available in round, flat, square, hexagonal, rectangular, hollow, and threaded profiles with hot rolled, cold drawn, forged, bright, polished, and centerless ground finishes. Every product undergoes rigorous quality inspections to ensure compliance with international quality standards before delivery.

Grade: Invar 42 Round Bar

Square bar size : 4 to 100mm

Hollow Bar : 32mm OD x 16mm ID to 250mm OD x 200mm ID)

Hex Bar size : 2-100mm A/F

Rectangles Size : 33 x 30mm to 295 x 1066mm

Flat bar size : Thickness: 2 -100mm, Width: 10 to 500mm

Round bar size : Diameter: 3-~800mm

Surface: Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clientsâ?? requirements

Technique : Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Condition : Hardened & tempered, annealed

Finish : Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Processing : Bar cutting to 650mm

Invar 42 Round Bars Equivalent Grades

STANDARD: Invar 42
Material No: 1.3917
UNS: K94100
EN Designation: Ni 42
Alloy: 42

Alloy N-155 Round Bars are premium cobalt-nickel-chromium based superalloy bars manufactured from UNS R30155 / EN 1.4974 grade for demanding high-temperature and high-strength applications. These round bars offer exceptional resistance to oxidation, corrosion, creep, and thermal fatigue while maintaining excellent mechanical properties at elevated temperatures. Alloy N-155 is widely used in aerospace, gas turbines, combustion chambers, aircraft exhaust systems, petrochemical plants, power generation, and other critical engineering industries. Available in round, flat, square, hexagonal, and rectangular forms, our Alloy N-155 Round Bars are manufactured using advanced forging, hot rolling, cold drawing, and precision machining processes to meet international quality standards and customer specifications.

Grade: Alloy N-155 Round Bar

Square bar size : 4 to 100mm

Hollow Bar : 32mm OD x 16mm ID to 250mm OD x 200mm ID)

Hex Bar size : 2-100mm A/F

Rectangles Size : 33 x 30mm to 295 x 1066mm

Flat bar size : Thickness: 2 -100mm, Width: 10 to 500mm

Round bar size : Diameter: 3-800mm

Surface: Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients requirements

Technique : Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Condition : Hardened & tempered, annealed

Finish : Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Processing : Bar cutting to 650mm

Alloy N-155 Round Bars Equivalent Grades

STANDARD: Alloy N-155
Material No: 1.4974
UNS: R30155
EN Designation: X12CrCoNi21-20
AISI/SAE: 661
Alloy: N-155

Alloy X750 Equalized Round Bars are high-performance precipitation-hardened nickel alloy bars manufactured from UNS N07750 / EN 2.4669 grade for applications requiring exceptional strength, oxidation resistance, and corrosion resistance at elevated temperatures. The equalized heat treatment enhances mechanical properties, dimensional stability, and stress relaxation resistance, making these bars ideal for demanding aerospace, gas turbine, nuclear, petrochemical, marine, and power generation applications. Manufactured using advanced forging, hot rolling, cold drawing, and precision machining techniques, our Alloy X750 Equalized Round Bars are available in round, flat, square, hexagonal, and rectangular forms with customized dimensions and premium surface finishes.

Grade: Alloy X750 Round Bar

Square bar size : 4 to 100mm

Hollow Bar : 32mm OD x 16mm ID to 250mm OD x 200mm ID)

Hex Bar size : 2-100mm A/F

Rectangles Size : 33 x 30mm to 295 x 1066mm

Flat bar size : Thickness: 2 -100mm, Width: 10 to 500mm

Round bar size : Diameter: 3-~800mm

Surface: Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients requirements

Technique : Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Condition : Hardened & tempered, annealed

Finish : Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Processing : Bar cutting to 650mm

Alloy X750 Round Bars Equivalent Grades

STANDARD: Inconel X-750
WERKSTOFF NR.: 2.4669
UNS: N07750

Haynes 25 Round Bars are premium cobalt-based superalloy bars manufactured from UNS R30605 / Alloy L605, offering exceptional high-temperature strength, oxidation resistance, wear resistance, and corrosion resistance. These bars are specifically engineered for demanding aerospace, gas turbine, marine, chemical processing, and high-temperature industrial applications where superior mechanical performance is essential. Haynes 25 maintains excellent strength and stability at elevated temperatures while providing outstanding resistance to thermal fatigue and aggressive corrosive environments.

Stainless Steel Impex is a leading manufacturer, supplier, exporter, and stockist of Haynes 25 Round Bars in India. We manufacture round bars, flat bars, square bars, hex bars, rectangular bars, and forged bars in various dimensions and finishes to meet customer-specific requirements. Our products are produced using premium raw materials, advanced manufacturing processes, and stringent quality control procedures to ensure precise dimensions, excellent surface finish, and reliable performance. Every product is tested according to international quality standards before dispatch.

Grade: Haynes 25 Round Bar

Haynes 25 Square bar size: 4 to 100mm

Haynes UNS R30605 Hollow Bar : 32mm OD x 16mm ID to 250mm OD x 200mm ID)

AMS 5759 Haynes 25 Hex Bar size :2-100mm A/F

Haynes UNS R30605 Rectangles Size : 33 x 30mm to 295 x 1066mm

AMS 5759 Haynes 25 Flat bar size: Thickness: 2 -100mm, Width: 10 to 500mm

AMS 5759 Haynes 25 Round bar size: Diameter: 3-~800mm

Haynes UNS R30605 Round Bar Standard Dimensions : Diameter / Height: Haynes 25 Rod and Bar Sizes : 0.5 inches / 0.625 inches / 0.75 inches / 0.875 inches / 1.0 inches / 1.125 inches / 1.25 inches / 1.375 inches / 1.5 inches / 1.75 inches / 2.0 inches / 2.25 inches / 2.5 inches / 2.75 inches / 3.0 inches / 3.25 inches / 3.5 inches / 3.75 inches / 4.0 inches / 4.25 inches / 4.5 inches / 5.0 inches / 5.25 inches / 5.5 inches / 6.0 inches / 7.0 inches / 8.0 inches / 9.0 inches.

Haynes 25 Surface: Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

Haynes UNS R30605 Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients requirements

AMS 5759 Haynes 25 Technique : Haynes 25 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Haynes 25 Condition : Hardened & tempered, annealed

Finish : Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Processing : Bar cutting to 650mm

Haynes 25 Round Bars Equivalent Grades

STANDARD: Haynes 25
Material No: 2.4964
EN Designation: CoCr20W15Ni
UNS: R30605
Alloy: 25

Custom 455 Round Bars are premium precipitation-hardening stainless steel bars manufactured from UNS S45500 / EN 1.4543 grade for applications requiring exceptional strength, toughness, and corrosion resistance. These round bars deliver outstanding mechanical properties after age hardening while maintaining excellent dimensional stability and machinability. They are widely used in aerospace, petrochemical, power generation, marine, medical, and defense industries where high performance under demanding operating conditions is essential. Available in round, flat, square, hexagonal, and rectangular forms, our Custom 455 Round Bars are produced in accordance with international quality standards and supplied in various sizes, finishes, and custom specifications.

Grade: Custom 455 Round Bar

Square bar size : 4 to 100mm

Hollow Bar : 32mm OD x 16mm ID to 250mm OD x 200mm ID)

Hex Bar size : 2-100mm A/F

Rectangles Size : 33 x 30mm to 295 x 1066mm

Flat bar size : Thickness: 2 -100mm, Width: 10 to 500mm

Round bar size : Diameter: 3-~800mm

Surface: Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clientsâ?? requirements

Technique : Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Condition : Hardened & tempered, annealed

Finish : Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Processing : Bar cutting to 650mm

Custom 455 Round Bars Equivalent Grades

STANDARD: Custom 455
Material No: 1.4543
UNS: S45500

We specialize in supplying high-quality stainless steel round bars, plates, and coils, including the following specifications:


- INCONEL
- MONEL
- HASTELLOY
- S.S. 347 / 1.4550
- S.S. 304 / 1.4301
- S.S. 316L / 1.4404
- S.S. 316Ti / 1.4571
- DUPLEX UNS S32205 / S31803 / 1.4462
- SUPER DUPLEX S32750 / 1.4410
- S.S. 321 / 1.4541
- S.S. 317L / 1.4438

Our materials are sourced to meet high industry standards, ensuring durability and performance for your projects.

Services Forging Machining Finishing Destructive Testing Heat Treating Non Destructive Testing
Materials Stainless Steel Duplex Stainless Steel Nickel Based Alloys Copper Alloy Alloy Steel Aluminum and Titanium
Industries Served Power Generation Aerospace Pumps Valves Food Special Machinery
Grade Stainless Steel Forgings 303 304 309 310 316 317 321 330 333 347 403 405 409 410 416 418 420 422 430 431 440 254 SMO Duplex 2205 Duplex 2507 Nitronic Ferralium 255 Alloy 20 174 PH 138 MO 155PH

Nickel Alloys High Temperature Alloy Forgings L605 Nickel 200 amp 201 400 K500 600 601 625 706 718 X750 800 825 900 901 903 907 909 Haynes 188 A286 Hastelloy B C S and X 904L AL6XN C276 C22 Haynes 120

Alloy Steel Forgings 4130 4140 4142 4145 4150 4320 4330 4340 4350 4620 4820 6150 8620 8630 8822 9310 52100 HY80 HY100 9315 300M Nitralloy 135M 1722 

Aluminum Forgings 2014 2024 2025 2219 2618 3003 5083 6061 7049 7050 7075 7079 7149 7150 and 7175

Copper Forgings Titanium Forgings 6AL4V Commercially Pure Grade 2 Grade 7 and Grade 12
Individually forged disc offer greater strength due to refinement of grains in the forging process Our capabilities for individually forged discs are
3 DIA up to 38 DIA 1500 lbs max
Individually forged no torch cut on OD
to 12 in thickness
No minimum requirement

* A53 is a steel grade produced according to American ASTM standards, which belongs to American standard. A53 Carbon steel round bar manufacturing requires parts with low stress and high toughness, such as car body, container, deep stamping vessels, pipes, gaskets, etc., which can be used for cold rolling, cold punching, cold heading, cold bending, hot rolling and other processes, as well as carburizing parts with low central strength, carbonitriding parts, etc.

* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.

* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.

* Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

Material : A53

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment : Clean, blasting and painting according to customer requirement

Thickness tolerance : + 0.1mm

Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

* A214 is a steel grade produced according to American ASTM standards, which belongs to American standard.

* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.

* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

Material : A214

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment : Clean, blasting and painting according to customer requirement

Thickness tolerance : + 0.1mm

Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

* A179 is a steel grade produced according to American ASTM standards, which belongs to American standard. A179 Carbon steel round bar is applicable to cold drawn high-quality low-carbon seamless steel pipe for heat exchanger and condenser.

* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.

* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

Material : A179

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment : Clean, blasting and painting according to customer requirement

Thickness tolerance : + 0.1mm

Application :

* It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

* A106 GrB strength grade 415MPa. ASTM A106Gr. B carbon steel round bar is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Carbon steel round bar for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 â?³ - 28 â?³, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials.

* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.

Material : A106Gr. B

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment

* Clean, blasting and painting according to customer requirement

Thickness tolerance : + 0.1mm

Application :

* It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing

* Waterproof paper, and steel strip packed.

* Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material 201 301304L 309S 316L310S321410 4302205 2507 904L INCOLOY Alloy HASTELLOY MONEL etc

Specifications

Round bar

Diameter : 0.1~500mm

Hexagonal bar

Size : 2mm~100mm

Flat bar

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar

Size : 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:

* 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM

* 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM

* 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:

1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded
articles;

6. It can be made into welded pipe for deep processing of seamless steel
pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel
manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

* 201 stainless steel is mainly used for decorative tubes, industrial tubes and some shallow stretched products. Such as: oil waste gas combustion pipeline; Engine exhaust pipe; Boiler shell, heat exchanger and heating furnace components; Silencing parts for diesel engine; Boiler pressure vessel; Chemical transport vehicle; Expansion joint; Spiral welded pipe for gas furnace pipe and dryer, etc.

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material : 201

Specifications

Round bar

Diameter : 0.1~500mm

Hexagonal bar : Size: 2mm~100mm

Flat bar
Thickness : 0.3~200mm

Width : 1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:

* 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM

* 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM

* 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded articles;

6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

Classification : Hastelloy Alloy
Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.

* 316L Stainless steel round bar is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material : 316L

Specifications : Round bar

Diameter : 0.1~500mm

Hexagonal bar : Size: 2mm~100mm

Flat bar :

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar : Size: 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:

* 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM

* 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM

* 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:

1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded
articles;

6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

Material

* ASTM(1005,1006,1008,1010,1015,1020,1025,1030,1035,1040,1045,1050,1055,1060,1065,1070,1080,1084,1016,1022)

* DIN(Ck10,Ck15,Ck22,Ck25,Ck30,Ck35,Ck40,Ck45,Ck50, 30Mn4,40Mn4)

* BS(040A04,095M15,045M10,080A40,045M10,080M50)

* Thickness : 0.1mm-300mm or as required

* Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

* Technique : Hot rolled,cold rolled

Surface Treatment

* Clean, blasting and painting according to customer requirement

Thickness tolerance

+ 0.1mm

* Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

* Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

* 304L stainless steel is mainly used in automobile accessories, hardware tools, tableware, cabinets, medical appliances, office equipment, weaving, handicrafts, petroleum, electronics, chemicals, textile, food, machinery, construction, nuclear power, aerospace, military and other industries.

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material : 304L

Specifications : Round bar

Diameter : 0.1~500mm

Hexagonal bar : Size: 2mm~100mm

Flat bar :

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar : Size: 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:

20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM

40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM

40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:

1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded articles;

6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

Incoloy 825

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment

2507 stainless steel is used in oil and natural gas industry; Offshore stone skyshatter oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, water spraying system, water stabilization system; petrochemical equipment; desalination (desalination) equipment (and high-pressure pipe and seawater pipe in the equipment). Mechanical and structural components that require both high strength and high corrosion resistance: fuel (waste) gas purification equipment.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

2507

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment

* Use of 2205 Stainless steel round bar: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.

Standard

* JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material : 2205

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar

Size : 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,

Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

* Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded
articles;

6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

12. Widely used in various vehicle parts

13. Wide application and furniture decoration industry

14. Widely used in various mechanical equipment

15. Widely used in various pipelines

16. Widely used in various construction machinery

17. Applied to household appliances

18. Applied to electronic communication equipment

310S Stainless steel round bar is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. 310S Stainless steel round bar has good creep strength and can work continuously under high temperature. The working temperature of 310S stainless steel is 1200 â??, and it can work continuously at 1100 â??. It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

310S

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry

430 stainless steel is used for building decoration, fuel burner parts, household appliances and household appliances. 430F is a steel with free cutting property added to 430 steel, mainly used for automatic lathes, bolts and nuts. 430LX adds Ti or Nb to 430 steel to reduce the content of C, which improves the processability and welding performance. It is mainly used in hot water tanks, hot water supply systems, sanitary appliances, household durable appliances, bicycle flywheels, etc.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

430

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment

About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

Monel400

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment

and the project, in order to ensure the quality of the project.

904L tainless steel round bar (super austenitic stainless steel) is a high alloyed austenitic stainless steel with very low carbon content. It has good corrosion resistance in dilute sulfuric acid and is specially designed for environments with severe corrosion conditions. It has high chromium content and sufficient nickel content. The addition of copper makes it have strong acid resistance, especially high resistance to chloride interstitial corrosion and stress corrosion cracking. It is not easy to appear corrosion spots and cracks. Its pitting resistance is slightly better than that of other steels. It has good processability and weldability, and can be used for pressure vessels.



Standard

JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material

904L

Specifications

Round bar

Diameter:0.1~500mm

Hexagonal bar

Size: 2mm~100mm

Flat bar

Thickness

0.3~200mm

Width

1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length

2m, 5.8m, 6m, or as required.

Surface

Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term

Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time

Standard size is in stock,prompt delivery or as order's quantity.

Package

Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM



Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment

* Hastelloy C-276 alloy is one of the few materials that can be used in hot concentrated sulfuric acid solution It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance at low and medium temperatures. Therefore, in the past 30 years, it has been widely used in harsh corrosive environments, such as chemical industry, petrochemical industry, flue gas desulfurization, pulp and paper making, environmental protection and other industrial fields.

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC.

Material : Hastelloy C-276

Specifications

Round bar

Diameter : 0.1~500mm

Hexagonal bar

Size : 2mm~100mm

Flat bar

Thickness : 0.3~200mm

Width : 1~2500mm

Square bar

Size: 1mm*1mm~800mm*800mm

Length : 2m, 5.8m, 6m, or as required.

Surface : Black, peeled, polishing, bright, sand blast, hair line, etc.

Price Term : Ex-work, FOB, CFR, CIF, etc.

Export to

Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.

Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.

Package : Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;

2. Used for manufacturing rivets;

3. Used for making spring steel wire and transmission mechanism parts;

4. It can be used for filling and strengthening in welding materials;

5. Main parts and components that can be used to manufacture molded articles;

6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.

7. It is widely used in petroleum, chemical, food and other industries

8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.

9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells

10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints

11. Widely used in hardware products factories and machinery manufacturers

Product Name : Stainless steel angle bar

Surface : Pickling, Phosphating, Galvanizing

Edge : Plain Mill

Standard : ASTM DIN GB JIS EN AISI

* The angle steel is mainly used to make frame structures, such as high-voltage transmission towers, frames on both sides of the main beam of steel structure bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves at the festival roadside, and shelves with air-conditioning and solar energy hung under windows. Angle steel is also widely used in building structures and engineering construction, such as house beams, power transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Packing and shipping

* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.

* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties.
* Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel.

Material : API5L

Thickness : 0.1mm-300mm or as required

Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique : Hot rolled,cold rolled

Surface Treatment : Clean, blasting and painting according to customer requirement

Thickness tolerance : �±0.1mm

Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time : Within 7-15 workdays after receiving deposit or L/C

Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity : 250,000 tons/year

* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

Product Name : Angle bar

Surface : Pickling, Phosphating, Galvanizing

Edge : Plain Mill

Standard : ASTM DIN GB JIS EN AISI

* The angle steel is mainly used to make frame structures, such as high-voltage transmission towers, frames on both sides of the main beam of steel structure bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves at the festival roadside, and shelves with air-conditioning and solar energy hung under windows. Angle steel is also widely used in building structures and engineering construction, such as house beams, power transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Packing and shipping

* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.

* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period

Application field

* The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.

HOT ROLLED MILD STEEL FLAT BARS MILL FINISH

12MM X 3.0, 5.0, 6.0 MM
16MM X 3.0, 5.0, 6.0 MM
19MM X 3.0, 5.0, 6.0 MM
25MM X 3.0, 4.5, 5.0, 6.0, 8.0, 10, 12MM
30MM X 3.0, 5.0, 6.0 MM

1 METRIC TON PER BUNDLE
LENGTH 3 METERS TO 7 METERS

Stainless steel & Carbon steel Flat bar
Standard:JIS, ASTM, AISI, UNS, KS, IS
Grade: stainless steel:201, 202, 304, 304L, 316L, 430, 409 ,2205 ,2507 carbo steel: Q195, Q215, Q235, Q255, Q275
Surface: NO.1 , POLISHED
Thickness: 0.3~200mm
Width: 1~2500mm
If you are interested in our products,pls contact me.

The raw material billet for producing stainless steel flat bar is low carbon square billet and the stainless steel bar. Steel bar is delivered as hot rolling forming, normalizing, or hot rolling.

Most of the flat bars find its application in construction industries in the form of base plates and brackets.

These weight bearing bars have their end use in construction industries with the possibility of tailor made sizes. It can be used as bridge, frame, fence, transmission ship, vehicle, fasteners etc..

Stainless steel hexagonal bar is hexagonal, solid long stainless steel material.
It's widely used in marine, chemical, construction etc. due to the characteristics of the stainless steel hexagonal rod.

UNIMIX METAL CORPORATION is one of the leading manufacturers, suppliers and exporters of Stainless Steel Bright Bars.

We are:
Stainless Steel Bright Bars Stockist
Stainless Steel Bright Bars Suppliers
Stainless Steel Bright Bars Traders
Stainless Steel Bright Bars Dealers
Stainless Steel Bright Bars Manufacturers
Stainless Steel Bright Bars Exporters

Our Offerings
Grade : 202, 303, 304, 304L, 309, 310, 316, 316L, 316TI, 317,

317L, 321, 410, 416, 420, 430, 440C, 904L, etc.
: 6 mm to 400 mm diameter
: ASTM, GB, JIS, DIN, etc.
: Round, Rectangle, Square, Hex, Angle, Channel.

Applications:
Construction Industry
Manufacturing Industry
Automotive Industry
Aerospace Industry
Architectural design and engineering.
Food-grade production environments and utensils.
Railway Industry
Household items, fixtures and products.
Medical supplies, machinery and surgical/hygiene tools.

Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel

Round bar is a steel bar with a smooth surface which is used for construction that does not need high-strength reinforced concrete Works

Execution MM Inches ISO Tolerance
Cold Drawn 4.00 -40.00 3/16"- 1.1/2" h11
Polished and Ground 5.00 -36.00 3/16"-1.1/2" h11

All the above Products are available in Alloy Steel, Stainless Austenitic Steel, Ferritic Steel as well as Martenisitic Steel Grades.

Execution MM Inches ISO Tolerance
Cold Drawn 3.50-40.00 3/16"-1. 1/2" h11
Polished and Ground 5.00-40.00 3/16" -1.1/2" h11

Execution MM Inches ISO Tolerance
Cold Drawn and Polish 2.50-75.00 1/8"- 3.00" h8-h9-h10-h11, ASTMA-484
Cold Drawn and Ground 8.00-75.00 5/6"-2.50" h8-h9-h10-h11
Peeled and Polished 40.00- 150.00 1.50"-6.00" h11, ASTMA-484 h11-DIN 1013
Peeled and Ground 20.00-50.00 3/4" 2.00" h9-h10-h11, ASTMA-484

Product Name
Stainless Steel Bar
Material
200 Series 300Series 400Series
Type
Round,square,hexagonal,flat,angle
Surface
Pickled,Black,Bright,Polishing,Blasting,etc
Round bar
3mm~800mm
Angle bar
3mm*20mm*20mm~12mm*100mm*100mm
Square bar
4mm*4mm~100mm*100mm
Flat bar
Thickness: 2mm~100mm,Width: 10mm~500mm
Hexagonal
2mm~100mm
Length
6m,5.8m,12m or as required
Application
chemical industry, shipping industry, manufacturing industry, construction,decorate Industry, electric power, pump shafts,sanitary wares ,furniture handles,boiler, high temperature resistant,low temperatureresistant, corrosion resistant.
Tips
The sizes or thicknesses of stainless steel bars can be customized, if you need additional information, please don�¢??t hesitate to contact us at any time.

Product name
Angle bar
Thickness
3~24mm or customer's requirements
Width
20~200mm or customer's requirements
Length
6~6.1 Meters or as customer's requirements
Standard
ASTM A53/ASTM A573/ASTM A283 GB/T706-2008, GB/T706-2016 DIN17100-80, JISG3192-94
Material
Q195,Q215,Q235B,Q345B,S235JR/S355JR/SS400
Finished
Black/Galvanized/Coated/Oiled/Painting,etc.
Usage
Widely used in various building structures and engineering structures, such as building beam, bridge, power transmission tower, lifiting and transporting machinery, ships, industrial furnaces, reaction towers, container racks and warehouse.

Product Name
Stainless steel hexagonal steel
Material
201ã??202ã??301ã??302ã??303ã??304ã??304lã??316ã??316lã??321ã??309sã??310sã??317lã??321ã??347ã??904l etc
Type
Round,square,hexagonal,flat,angle
Surface
Pickled,Black,Bright,Polishing,Blasting,etc
Round bar
3mm~800mm
Angle bar
3mm*20mm*20mm~12mm*100mm*100mm
Square bar
4mm*4mm~100mm*100mm
Flat bar
Thickness: 2mm~100mm,Width: 10mm~500mm
Hexagonal
2mm~100mm
Length
6m,5.8m,12m or as required
Application
chemical industry, shipping industry, manufacturing industry, construction,decorate Industry, electric power, pump shafts,sanitary
wares ,furniture handles,boiler, high temperature resistant,low temperatureresistant, corrosion resistant.
Tips
The sizes or thicknesses of stainless steel bars can be customized, if you need additional information, please donâ??t hesitate to
contact us at any time.

Product Name
Stainless Steel Flat Bar / Rod
Material
201/202/304/304L/316/316L/321/410/420/430/440C/S31803/S38815/S30601etc.




Specifications
Round bar
Diameter: 3mm~800mm
Angle bar
Size: 3mm*20mm*20mm~12mm*100mm*100mm
Square bar
Size: 4mm*4mm~100mm*100mm
Flat bar
Thickness: 2mm~100mm ; Width: 10mm~500mm
Hexagonal bar
Size: 2mm~100mm
or as per customerâ??s request.
Technique
cold rolled & hot rolled & COLD Drawn, Polish
Surface
acid pickling/Mirror polish/Color coating/Brushed/Common polishing
Standard
ASTM AISI EN DIN GB
Packing
Standard export packaging or as per customerâ's request

Type : Steel Flat Bar
Standard : STM, AISI, EN, DIN, JIS, GB
Grate : A36, S235jr, St37-2, SS400, Q235, Q195
Technique : hot rolled, slitted, round edge
Size ; Width
Thickness
Length : 10-200mm
1.5-30mm
6m, 9m, 12m or to order
OEM : yes
Tolerance : As the standard or your requirement
Application : Construction/Shipbuilding/Machinery manufacturing/Steel structure
Features
1. High quality

Features
2.High dimensional accuracy
3. High utilization rate of material
4. Saving cost price

Packing Details
1. Iron sheet in both ends
2.All wrapped packing with plastic woven bag
3.Loose package
4.As the requirement of customer.