Find Verified Industrial And Automotive Suppliers, Manufacturers and Wholesalers

Our scrubber systems utilizes carbonated water instead of the existing H2SO4 method which can be hazardous. The CO2 gas is made into nano-micro sized bubbles using a CO2 bubble nozzle and a pressurized tank, and the bubble-form CO2 acts as a neutralizer for the NH3.
Also our FM qualified (FM 4910, 4922) scubbers are made out of high-corrosion resistant, nonflammable material. Also, a smart AI based fault detection system is acquired to the fans, enabling prediction of the fan's lifespan.

This is the vertical closed-loop geothermal system and this method makes depth of ground heat exchanger installation up to 300m or more compared to existing technology. Thus, this can improve economic feasibility as increasing heat efficiency.

There are 4 characteristics of this product,
1) Install weigh band and weight added device on the exterior and lower part of the geothermal coil pipe to increase the weight per unit and this can solve buoyancy problems.
2) It has various types of geothermal coil pipe (i.e. 2,4) and expand the diameter of geothermal coil pipe to improve heat exchange rate.
3) The manhole and leakage sensor are installed for maintenance and inspection on the ground burial area
4) Install the smart tag on geothermal boreholes and ground pipe by using internet of things (loT) technology to know accurate location of geothermal boreholes.

This is the subsidence prevention geothermal system and the water distribution pipe is installed in the geothermal boreholes to enable the normal looping of the cyclic water at the time of geothermal boreholes subsidence for the stable geothermal system operation.

There are 3 characteristics of this product,
1) Install the recycling water pipe to prevent geothermal boreholes subsidence.
2) Install the filler in between the inside casing and excavation hole to increase heat conductivity rate
3) Create the geothermal boreholes on the lowest part by securing the grouting zone to have no interval even when the inside casing joint part is deviated.

* Online Coagulant Dosage Analysis & Control System (Model: CAST)
- Optimal Flocculation, Membrane Pretreatment, T-P Removal and Polymer dosage control for a decanter.
- Coagulant dosage determination based on colloid coagulation theory.
- Optimal dosing of coagulant depending on inflow water quality change.
- Stable operation even though highly turbid raw water inflow
- Applications : Water Purification Plants (Coagulant control for optimal flocculation of drinking water plant), Membrane Pretreatment (Reducing membrane fouling), Sewage Treatment Plants (Coagulant control for T-P and polymer dosage control up to 4 decanter)

When cutting a CD double-pipe (conduit), this tool can be cut only for external conduit without damaging the internal wires and the sheath.

Easier to use tool
Safer to use (no spark) tool
Blade design efficient for straight, curve, and round cutting

Patent No. 10-0917125
Design Registration No. 30-0491747

We are one of the leading manufacturers and exporters wide range of staples and staple making machines from s. Korea. It is our promise to manufacture hi-tech goods with higher quality and performance. Also we always hear from our customers, which contribute to our growth.

Hogring
1-code: c-ring 11ga hogring
2-ring size: 1-1/2 (45mm)
3-point: shart, blunt
4-materials: galanized, stainless, aluminum, galfan(aluma)

Hogring
1-code: c-ring 15ga hogring
2-ring size: 3/4 ~ 7/8
3-point: shart, blunt
4-materials: galanized, stainless, aluminum, galfan(aluma)

Hogring
1-code: c-ring 16ga hogring
2-ring size: 3/8 ~ 3/4
3-point: shart, blunt
4-materials: galanized, stainless, aluminum, galfan(aluma)

High speed performance
High capacity memory
Elegant design

1. This is DOOSAN/DAEWOO DB33A used diesel engine of Forklift.

2. Cylinder no. and Displacement: 4cyl, 3,268cc.

3. Price: usd700/unit ex factory

4. Usage: Forklift, Generator, Agricultural Machine, Marine Engine, Other workable range of Mechanicaldiesel engine.

5. Advantage: 1) The Engines are detached from on working Forklift as occupied condition.So the Engines are ready to work and keep good condition.
2) Our company detach Diesel engines from Excavators and Forklifts as big scale( more than 1,000unit a year ).So we could make much cheapper price than any other country including China.

6. If you want more information, please contact us.

1. This is DOOSAN DB58T used diesel engine.

2. Cylinder no. and Displacement: 6cyl, 5,785cc.

3. Price: usd1,500/unit ex factory

4. Usage: Excavator, Generator, Agricultural Machine, Marine Engine, Other workable range of Mechanicaldiesel engine.

5. Advantage: 1) The Engines are detached from on working Excavator as occupied condition.So the Engines are ready to work and keep good condition.
2) Our company detach Diesel engines from Excavators and Forklifts as big scale( more than 1,000unit a year ).So we could make much cheapper price than any other country including China.

6. If you want more information, please contact us.

1. This is ISUZU A-4JB1used diesel engine.

2. Cylinder no. and Displacement: 4cyl, 2,768cc

.3. Price: usd700/unit ex factory

4. Usage: Forklift, Generator, Agricultural Machine, Marine Engine, Other workable range of Mechanicaldiesel engine.

5. Advantage: 1) The Engines are detached from on working Forklift as occupied condition.So the Engines are ready to work and keep good condition.2) Our company detach Diesel engines from Excavators and Forklifts as big scale( more than 1,000unit a year ).So we could make much cheapper price than any other country including China.

6. If you want more information, please contact us.

1. This is DOOSAN DC24 used diesel engine.

2. Cylinder no. and Displacement: 4cyl, 2,370cc.

3. Price: usd600/unit ex factory

4. Usage: Forklift, Generator, Agricultural Machine, Marine Engine, Other workable range of Mechanicaldiesel engine.

5. Advantage: 1) The Engines are detached from on working Forklift as occupied condition.So the Engines are ready to work and keep good condition.
2) Our company detach Diesel engines from Excavators and Forklifts as big scale( more than 1,000unit a year ).So we could make much cheapper price than any other country including China.
6. If you want more information, please contact us.

1. This is NISSAN AL30 used diesel engine.

2. Cylinder no. and Displacement: 4cyl, 2,953cc.

3. Price: usd700/unit ex factory

4. Usage: Forklift, Generator, Agricultural Machine, Marine Engine, Other workable range of Mechanicaldiesel engine.

5. Advantage:
1) The Engines are detached from on working Forklift as occupied condition.So the Engines are ready to work and keep good condition.
2) Our company detach Diesel engines from Excavators and Forklifts as big scale( more than 1,000unit a year ).So we could make much cheapper price than any other country including China.

6. If you want more information, please contact us.

1. This is YANMAR 4TNE94 used diesel.

2. Cylinder no. and Displacement: 4cyl, 2,776cc.

3. Price: usd800/unit ex factory

4. Usage: Forklift, Generator, Agricultural Machine, Marine Engine, Other workable range of Mechanical diesel engine.

5. Advantage:
1) The Engines are detached from on working Excavator and Forklift as occupied condition.So the Engines are ready to work and keep good condition.
2) Our company detach Diesel engines from Excavators and Forklifts as big scale( more than 1,000unit a year ).So we could make much cheapper price than any other country including China.

6. If you want more information, please contact us.

1. This is DOOSAN DB58 used diesel engine of Forklift.

2. Cylinder no. and Displacement: 6cyl, 5,785cc.

3. Price: usd950/unit ex factory.

4. Usage: Forklift, Generator, Agricultural Machine, Marine Engine, Other workable range of Mechanicaldiesel engine.

5. Advantage:
1) The Engines are detached from on working Forklift as occupied condition.So the Engines are ready to work and keep good condition.
2) Our company detach Diesel engines from Excavators and Forklifts as big scale( more than 1,000unit a year ).So we could make much cheapper price than any other country including China.

6. If you want more information, please contact us.

Subject: Diesel EN590 Supply Direct End Buyer Opportunity

Dear Prospective Buyers,
We are pleased to offer Diesel EN590 with the following supply options. Our initial trial quantity starts at 100,000 MT, followed by contract volumes of 200,000 MT per month, with options to scale further. Pricing is in the range of Platts -$20 to -$40, and we work exclusively with end buyers.

Key Offer Details:
Pricing: Platts -$20 to -$40
Minimum Trial Quantity: 100,000 MT
Contract Volume: 200,000 MT per month, with scalability options
Direct End Buyer Engagement: No seller-side commission; the price is what the buyer pays

We do not engage with intermediaries unless they are compensated by the buyer. If you are an end buyer interested in securing fuel within this price range, please reach out. Upon initial contact, we will schedule a Zoom meeting to assess your requirements. Once vetted, we will arrange a direct discussion with the end seller.

Available Locations & Supply Options:
1. Wilhelmshaven, Germany (HES) We will have fuel in our tanks at HES Tank Farm by the end of the month. From there, we can offer sales via Tank-to-Vessel (TTV) or Tank-to-Tank (TTT) transactions.
2. Rotterdam, Netherlands Supply available via Vopak-to-Vopak or through an active TSA with TSR.
3. Mersin, Turkey Fuel will be available starting March.
4. Fujairah, UAE Anticipated supply ready by August, available via TTT or TTV transactions.

If you are a serious end buyer, please contact me directly to discuss further.

Recycled Pulp ; De-inked(Waste paper) pulp / Our recycled pulp(deinked pulp, waste paper pulp) will reduced deinking sludge and inorganic chemicals in your Mill / Origin : Republic of Korea / MOQ : 500MT~ (negotiable for trial(Test) order) / Payment : L/C, T/T / Supply ability : 5,000MT/month

PE black masterbatch made by blending N330 with recovered Carbon Black (N330).
Suitable for extrusion and injection applications such as sheets and pipes.

Recovered Carbon Black (rCB) made from tire pyrolysis.

Used our rCB as an alternative to prime N330 carbon black in order to reduce your cost of goods and increase your price competitiveness and profitability.

Applications:
- rubber compounds
- tires
- black masterbatch
- ink
- paint

Insulated Ice boxes and fishing boxs
100% made in Korea