Weather strips of automotive Devulcanization
and extruding machine with stainless 80 wire mesh and remove smell of Sulfur
Packing is 1,250kg/pallet
Hardness A type 63~65 /Tensile Strength 75~80kgf/sq cm / Elongation rate 200% / Specific Gravity 1.29
Model: Volvo Penta TAMD41M-A
Quantity: 12 Units with gearbox & single unit available
Condition: Ex-Navy very clean, well-maintained
Operating Hours: 500-1,200 hours
Location: Busan, Korea
Proof: Actual warehouse photos and videos available upon request
Gearbox: ZF HSW 630 H1
Reduction Ratio: 1.51 (Forward) / 1.52 (Reverse)
Model: H10.00XM-6, 10-ton capacity
Brand / Model: Hyster H10.00XM-6
Year of Manufacture: 2007
Capacity: 10,750 kg @ 600 mm load center
Lifting Height: 3,750 mm
Truck Weight: 15,260 kg
Engine: Cummins Diesel, 116 kW (approx. 155 HP), 6-cylinder turbocharged
Condition: Good working condition, ex-military surplus, limited operating hours
Location: Korea
We have brand new Transfer Case for Pajero, study it for suitable in your market
Mitsubishi Pajero Transfer Case Technical Information
System Name: Super Select 4WD / Super Select 4WD II
429 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications:
Engine Type: 4.6L V8
Horsepower: 250 hp
Steering: Digital Throttle & Shift (DTS)
Starter: Electric
Shaft Length: Available in 25" (X-Long) and 30" (XX-Long)
Power Trim & Tilt: Yes
Fuel System: Electronic Fuel Injection (EFI)
Alternator: 115-amp
Weight: Approximately 600 lbs (272 kg)
Cooling System: Water-cooled with thermostat & pressure-controlled
The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.
We are very well handling used Korean car engine with gearbox:
Hyundai Porter/Grace/SantaFe engine with gearbox (Euro 4, 5)
Kia Bongo/carnival engine with gearbox (Euro 3, 4, 5)
we are to meet your needing various engines from Korea
We are very well producer of rubber roll sheet in Korea for satisfying the requirements below conditions
Thickness:10~80mm
Width: Min 910~ Max1,500mm
Length: 10~30m
Color: as your request excepting white
Material: Natural rubber, SBR, EPDM as your request
We can supply Aluminum Scrap of 30 series and 60 series from Korea.
We kindly ask your company to actively review this opportunity for your market.
If there is genuine interest, we will be ready to provide our price offer based on your required terms.
Please let us know your specific needs, and we will revert with detailed information including price, quantity, and shipping terms.
Based on the serial number 10KA0976, your equipment is a SkyTrak 10000M ATLAS telehandler, also known as the All-Terrain Lifter Army System (ATLAS) with a 10,000 lb capacity. Here are the key specifications:
Lifting Capacity: 10,000 lbs (4,536 kg)
Maximum Lift Height: Approximately 27.5 ft (8.38 m) with the 10,000 lb carriage
Maximum Reach: Approximately 24 ft (7.4 m)
Dimensions:
Height: 102 inches (259 cm)
Width: 100 inches (254 cm)
Turning Radius: 13.5 ft (4.1 m)
Frame Tilt: 9 degrees each way
Hydraulic Reservoir Capacity: 55.6 gallons (214 liters)
Fuel Tank Capacity: 44 gallons (167 liters)
Boom: Telescopic 3-stage
Steering Modes: 2-wheel, 4-wheel, and crab steering
Fording Depth: Up to 36 inches (91 cm)
Transportability: Air transportable in C-130, C-141, C-5A, and C-17 aircraft
Plese study Neutrized Gypsum from KOrea
PH 9% MIN.
FREE MOISTURE (wt%): 15% MAX.
Combined H2O :19% MIN.
CaO : 30% MIN.
SO3 : 40% MIN.
Cl(wt%) :0.01% MAX.
CaSO4ã?»2H2O : 90% MIN.
TOTAL P2O5(wt%) :1.0% MAX.
W/S P2O5(wt%) : 0.05% MAX.
SIZE(0~50mm) : 100%
INSOLUBLE RESIDUE : 4% MAX.
We are producing only Aluminum Gravity Die Casting for 30 year in Korea
We have a lot of experience about Gravity die Casting
Please make anytime with drawing
Procedure
1. Buyer shall issue LOI(Letter of Intent) to Seller
2. Seller shall issue SCO(Soft Corporate Offer) to Buyer and Buyer shall issue ICPO(Irrevocable Corporate Purchase Order) to Seller when it is accepted.
3. Buyer shall issue MT705 or the attached BCL(Bank capability Letter) through their bank to prove the bank capability.
4. ICPO shall be written with Buyer companyâ??s letterhead, and include Buyer banking information and representativeâ??s passport copy
5. Seller shall issue to Buyer the draft of SPA(Sales and Purchase Agreement) together with IMFPA(Non-Circumvention, Non-Disclosure Agreement) &
NCNDA(Irrevocable Master Fee Protection Agreement) and all of agreements are signed(Sealed,Endorsed) together when both agree.
6. Buyer shall issue the MT700, 100% Irrevocable At sight L/C (Letter of Credit) through the bank SWIFT for the full value of the commercial invoice.
7. Seller's bank shall issue PB(Performance Bond) equivalent to 2% of the value of the L/C to the buyerâ??s bank after Sellerâ??s bank approves the L/C.
8. The delivery schedule of the signed SPA (contract) shall keep on time and shipment shall arrange as soon as possible.
Buyer can check and get the followings once the BCL(proof of bank capability) and MT700 are transferred and confirmed through the bank SWIFT system..
Seller's business license
Manufacturer Export license
Certificate of ownership
Certificate of Origin
Certificate of Export Permission
Proof of Product
Certificate of Chemical Composition
SGS report for technical specification test
Ownership transfer
Sight Inspection for Seller's Warehouse
Any of additional documents shall be exchanged only through the secured Bank channels(Bank SWIFT) such as MT700 or MT705.
If you are a real buyer, feel free to contact me. The seller has 5 million tons in stock.
429 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
