Find Verified Solvents Suppliers, Manufacturers and Wholesalers

Dichloromethane (DCM or methylene chloride) is colorless, volatile liquid, not miscible with water, with many organic solvents.
CAS No. 75-09-2

Hot melt fatty polyamide resin

KINGMIDE 533 is fatty polyamide resin especially designed for the flexographic printing ink uses.

It is easy to alcohol soluble and mixing organic solvent -such as toluene and alcohol type solvent .

The followings are the major characteristics of the KINGMIDE 533 as used
in a flexographic printing ink formulation.

(a) good solubility into various conventional industrial solvents
(b) superior adhesion onto many kind of substrates
(c) high water resistance
(d) high gloss

Chaoh Shinn provides various kinds of low toxic,high quality and price- competitive thinners in accordance with customers' operating conditions-temperatures, humidity and any other special requirements respectively.These solutions will enable our industrial customers to manufacture high quality products and make benefits due to more productivity as well as cost savings in purchasing, inspection and production.

Chaoh Shinn provides various kinds of low toxic,high quality and price- competitive thinners in accordance with customers' operating conditions-temperatures, humidity and any other special requirements respectively.These solutions will enable our industrial customers to manufacture high quality products and make benefits due to more productivity as well as cost savings in purchasing, inspection and production.

We are making CDR and DVDR dye by ourselves. Please state your requirement and you can get the related solvent and stamper at one time as well. We have the following products available:

1. Dye Powder (Recording Pigment):
CD-R Dyes:
Phthalocyanine Based (for Silver Silver )
Cyanine Based (for Light Blue)
DVDR Dyes:
AZO Based Dye Powder
Cyanine Based Dye Powder

2. Organic Solvents:
ECH, TBB, MCH, PM/PMA, DAA, TFP, DBE

3. Stamper for Blank CD-R and DVDR.


500g or 1kg per bottle.

AFTEK FLEX-PRO MS is a one-component sealant based on silane modified polymer, which is moisture cured sealant. Humidity and temperature can influence on the skin formation and curing speed, and the joint depth can also influence on the curing time.
AFTEK FLEX-PRO MS is free of solvents, isocyanates, silicones and PVC. It has very low VOC while curing. It performs good adhesion to most substrates. It is suitable for most of common construction materials,especially to concrete, aluminum, mason, glass, etc.
and it is compatible with most of paint systems.It has very good UV resistance property that can be used for interior and exterior applications.

A self-emulsifiable type epoxy curing agent The mixture with liquid type epoxy resin provides stable emulsion, and can be used for pollution-free coating containing no solvents in its system. Outstanding is penetrating power into absorbent concrete, steel plate and other inorganic substrates. Among them , as it is a water dilutable, such application as concrete primer is most recommendable.

A self-emulsifiable type epoxy curing agent The mixture with liquid type epoxy resin provides stable emulsion, and can be used for pollution-free coating containing no solvents in its system. Outstanding is penetrating power into absorbent concrete, steel plate and other inorganic substrates. Among them , it is a water dilutable, such application as concrete primer is most recommendable.

Works on wet,dry,dirty or corroded pipe.
Works under salt or frexh water.
Works on any metal or plastic pipe.
Cures in 10-15 minutes
No tools needed
Impervious to water, oil, chemicals, solvents & acids.

INSTRUCTION
The Lizard-100 series are compact portable borescopes that allow users to execute inspection in restricted spaces which could not be directly observed with naked eyes. The PMI Lizard-100 series set includes a portable device, a camera tube, a cleaning kit, a power adapter, a video connector, and a 4GB SD card. The portable device with 4.8â?� TFT LCD screen is capable of viewing, capturing and reviewing photos and video images. Images can also be displayed directly on a TV screen. The portable device is powered by rechargeable Li-Ion battery and a universal charger is included.

FEATURES

Super wider angle camera
Digital signal with high resolution, VGA (640 x 480 pixels)
4.8" Wider screen
Quick snap/ Video recoding
Special design marked scale on probe to measuring
Waterproof & Grease proofing
Comfortable TPR handle
Image editor software

Portable Device
Designation Lizard-100
Display 4.8" TFT LCD, 800 x 400 Pixels
Display Strength Tempered Glass
Interface
Micro USB 2.0 / AV out
Battery
Rechargeable Lithium Battery (3.7V)
Power adapter
100~240V AC in, 50/60Hz 0.12 A
5.0V DC out, 0.85A ~ 1A
Recording Medium Free 4G SD card
Photo Storage Format JPEG (640 x 480)
Storage Capacity Up to 20,000 pictures or 480 min. of video on 4 GB card
Video Recording Format AVI (640 x 480)
Video Out Format NTSC & PAL
Frame rate 30 fps
Compression Format MPEG4
Video size 10 min. (150 MB)
Working& Storage/ Battery charging temperature range -10 ~ 65 °C (14 ~ 149 °F)
Functions Snapshot, Video recording, Images (Photo & video) review on LCD screen, TV out, Transfer of photo & video from SD card to PC, Digital zoom
Magnifier 3 x
Battery Life 3 hours
Ingress Protection IP 54


Camera tubes
Designation US40 Series Us45 Series US50T Series UH50T Series
Tube type Semi-Rigid Hose
Tube Surface Treatment EPD /PE Cover PVC Cover
Image sensor CMOS Image Sensor
Resolution VGA (640 x 480 pixels)
Light Source 6 adjustable white LED s
Size tip diameter 4.0 mm 4.5 mm 5.0 mm
Tube length 1m, 2m, 3m 5m
Field of View (FOV) 80 °
Depth of Feild (DOF) 1 cm ~ 10 cm
Resistant to water & fuels Yes (For most fuels and solvents)
Min bending radius 50 mm
Working temperature range -10 ~ 65 °C (14 ~ 149 ° F)
Ingress Protection IP 67

Marble


Endoscope

*Works on wet,dry,dirty or corroded pipe
*Works under salt or fresh water
*Works on any metal or plastic pipe
*Cures in 10~15 minutes
*No tools needed
*Impervious to water,oils,chemicals,solvents&acids

Flexible Multi-Purpose Hybrid Polymer Sealant
Description
AFTEK FLEX-PRO MS is a one-component sealant based on silane modified polymer, which is moisture cured sealant. Humidity and temperature can influence on the skin formation and curing speed, and the joint depth can also influence on the curing time.
AFTEK FLEX-PRO MS is free of solvents, isocyanates,silicones and PVC. It has very low VOC while curing. It performs good adhesion to most substrates; It is suitable for most of common construction materials,especially to concrete, aluminum, mason, glass, etc.
and it is compatible with most of paint systems. It has very good UV resistance property that can be used for interior and exterior applications.

DESCRIPTION
Bituminous Primer is product containing oxidized bitumen and a mix of technical quick
drying solvents.

APPLICATION
Bituminous Primer is recommended to block the dust and the porosity of concrete surfaces allowing the quick application o f the bituminous polymer membranes, both with flame application and cold bonding with bituminous sealants or with self adhesive membranes.Bituminous Primer allows quick film drying, has an excellent penetration and adhesion to the support for the absence of surface stickiness.

INSTRUCTIONS FOR USE
Concrete surfaces must be dry, clean and free from oil, dust or release agents.
This type of primer is ready for use after mixing it. Bituminous Primer can be either sprayed or applied by means of roller or brush. In case of hot application of membranes with flame, the primer can be used only if surfaces are completely dry. On the contrary, if the surface is damp, it is recommended to use a bituminous primer specific for damp surfaces. The drying time depends on concrete porosity, on the quantity of product applied and on the temperature of both the surface and the environment.
Usually the film gets dry after 2-4 hours from the application. The drying time can increase in case of cold temperature and with low a bsorption surfaces.

PACKING
5 gallon Bucket

SHELF LIFE
The product can be stocked in closed buckets and in dry area, far from UV rays for
12 months.

TOOL CLEANING
After use clean tools with common solvents.

DESCRIPTION
CC-610S Modified Polyurethane weather-shield is a two component with great bonding
strength on materials that are hard to adhere.
CHARATERISTIC
More suitable coating on surface as soft plastic, PVC, ABS, PCâ?¦..etc.
Non-yellowish and excellent gloss and color retention after exposure in outdoor.
Resist from most chemical products
Coating oil or color changing for tiles, imitation rocks.
Glass-painting and painting for iron, zinc plate, and stainless steel
High weather resistance and high gloss corrosion prevention paint for cement,
stones, asbestos, bricks, wooden materials, and bamboo wood.

NOTES
Please mix and stir well before using
Please make sure the lid is closed tightly.
Please keep the surface free of dust, loose or paint before painting
The tools are washable by solvents after application.
Avoid direct sunlight or high temperature environment to ensure excellent product
quality.
Keep the storage environment well ventilated and stay away from flammable when
applying paints.
The actual volume application depends on the surface condition.

Dcp 99% and chp

Physical properties of dcp:

Appearance: white crystal
Specific gravity at 25 degree c: 1.012
Molecular formula: c6h5c(ch3)2o2
Molecular weight: 270.37
Purity: 99% min.
Melting point: 38 ~ 40 degree c
Activated oxygen: 5.87% ~ 5.92%
Half - life: 116 degree c/ 10 hours
171 degree c/ 1 minute
Solubility: insoluble in water, dissolved in general organic solvents,
Synthetic rubber, crude rubber, polyester resins etc.

Chp: cumene hydroperoxide

New product coming up by march, 2009
Bibp

20kgs per pack in an outter carton
16.2 metric ton per 20 fcl

DESCRIPTION
ITLS PMS 60 is a single component elastomeric sealant without isocyanates.
It cures rapidly under the effect of atmospheric humidity to form a flexible and resistant joint with very good adhesion on most materials.

APPLICATION
ITLS PMS 60 is suitable for industrial and refrigerated trailers, truck bodies, shipbuilding, air conditioning and ventilation units, sandwich panels and other industrial applications.
ITLS PMS 60 can also be used for bonding and caulking different materials used in the building industry : concrete, wood, aluminum, most lacquered metals, polyester, glass, stone, ceramic, and so on. However, for difficult materials especially lacquered or non-ferrous metals, it is necessary to make tests beforehand.

INSTRUCTIONS FOR USE
SUBSTRATE PREPARATION:
The substrates must be clean, even, dry, free of dust, oil, grease and any contaminants that could harm bonding. All traces of poorly adherent paints or coatings should be systematically removed beforehand.
They may be cleaned with PMS primer, methylethylketone (MEK) or acetone. Check the compatibility of the solvent used with the substrates.
It may be necessary to rub down the substrate beforehand. After rubbing down, the surface should be recleaned. Allow the substrate to dry after degreasing.
When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer.

CAULKING:
ITLS PMS 60 can be applied by a manual or pneumatic gun. After application, use a putty knife to smooth the joint with soapy water. Do not apply at a temperature under 5 C. In cold weather, store the cartridges at about 20 �°C before use. This product should be used within 24 hours of opening the cartridge protection; otherwise, the sealant could harden inside. Avoid any contact with non-cured polyurethanes during curing.

CLEANING:
Tools can be cleaned with PMS primer, MEK or acetone before the sealant has completely cured. After curing, abrasion is necessary.

STORAGE AND SHELF LIFE
12 months in the original, hermetically sealed packagings between 5 and 25 C

PACKAGING
290 mL cartridges and 600 ml sausages

SAFETY
Not classified as hazardous. Read the material safety data sheet before use.

A solid type fatty polyamide resin synthesized by a polycondensation of mainly the dimerized fatty acid and the alkylenepolyamines.
The major applications is in the rotogravure printing inks .

(a). Good solubility into various conventional industrial solvents.
(b). Superior adhesion onto many kind of substrates.
(c). Good wetting( dispersion,)of the pigments and dyestuffs.
(d). Good resistance to water, oil and chemicals..
(e). Fast release of the solvent from the printed film..
(f). Smooth and hard film surface with high gloss.
(g). Smooth and hard film surface with high gloss, which is suitable for over-printings.