Find Verified Slag Suppliers, Manufacturers and Wholesalers

CHEMICAL COMPOSITION ELEMENTS CaO% MgO% SiO2% Al2O3% TFe% MnO% Cr2O3% P2O5% S%
MIN 24.00 3.50 10.00 2.00 11.00 0.02 0.00 0.02 0.05
MAX 49.00 25.00 28.00 12.00 36.00 2.50 0.80 0.42 0.20
TYPICAL 39.20 12.20 16.80 4.60 21.70 1.25 0.12 0.28 0.12

PHYSICAL APPEARANCE ASPECT
Agglomerate materials COLOR Gray blackish color

CHEMICAL BEHAVIOR
The basicity of the slag is normally fixed by the amount of lime and calcinated dolomite added, the silicon and aluminum levels of the hot metal and steel scrap charged as well as ferro-alloys.

Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;

NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.

Aluminum Ingots 99.7% Ingots A7 are high-purity primary aluminum products manufactured to meet international industrial standards.

With a minimum aluminum content of 99.7%, these ingots provide excellent consistency, superior conductivity, and reliable mechanical performance for a wide range of manufacturing applications.

They are widely used in casting, extrusion, rolling, alloy production, automotive components, electrical conductors, and general engineering industries.

Produced under controlled smelting processes, A7 grade aluminum ingots ensure low impurity levels and stable chemical composition. Their uniform structure allows smooth melting, efficient processing, and high productivity in downstream operations.

Specifications:

Grade: A7 Primary Aluminum

Aluminum (Al) Content: 99.7% Minimum

Iron (Fe): 0.20% Maximum

Silicon (Si): 0.10% Maximum

Copper (Cu): 0.01% Maximum

Zinc (Zn): 0.03% Maximum

Titanium (Ti): 0.03% Maximum

Standard Weight: Approximately 20-25 kg per ingot

Surface: Smooth, free from cracks, slag, or excessive oxidation

These ingots offer excellent corrosion resistance, lightweight properties, and high thermal and electrical conductivity, making them a reliable raw material for diverse industrial applications.

Mine dryer is a core supporting equipment in mining, building materials processing, environmental protection and other fields. It is mainly used for drying materials such as ore, slag, coal slurry, river sand, sludge, etc. By removing moisture from the materials, it improves their subsequent processing efficiency, storage stability or resource recovery value. It is an indispensable equipment in the mining industry chain.

working principle
Adopting a tilted drum and copying board design, the material is lifted up by the copying board as the drum rotates inside, and fully contacts with hot air to complete drying. Suitable for various types of materials such as quartz sand, coal slurry, slag, etc., for example, a 1.5 Ã?? 10 meter drum dryer can reduce the moisture content of quartz sand from 30% to below 1%. After drying, the particles are uniform and free of lumps, which does not affect the subsequent processing accuracy

Technical Data Sheet Included In Images

EU quality wood pellets are made from sustainably obtained pine without any additives. Our pellets are considered to be the highest possible grade, with exceptionally high caloric and very low ash content. We package our pellets in our proprietary humidity-resistant bags, allowing the product to reach your destination without the introducing any humidity to our exceptionally dry pellets. Our pellets do not slag or form cakes.

Aluminum Ingot A7 (High Purity 99.7%)

Product Specifications:
Grade A7
Purity (Al Content) 99.7% (minimum)
Form Rectangular ingots with lifting notches or grooves
Weight per Ingot 15-25 kg (or as per buyer request)
Bundle Weight ~1000 kg strapped with steel bands
Color Silvery-white, smooth surface, free of cracks or inclusions
Surface Condition Clean, dry, free from oil, oxidation, or contamination
Melting Point ~660.3 C
Appearance Bright metallic luster, no visible slag or shrinkage

Chemical Composition (in % by weight):
Aluminum (Al) 99.70%
Silicon (Si) 0.10%
Iron (Fe) 0.20%
Copper (Cu) 0.01%
Zinc (Zn) 0.02%
Manganese (Mn) 0.01%
Magnesium (Mg) 0.01%
Titanium (Ti) 0.03%
Other (each) 0.03%
Total Others 0.30%

Containerization: Suitable for 20ft or 40ft containers

Quality Certifications:
ISO 9001:2015

Applications:
Electrical Conductors
High-grade Die Casting
Cable Sheathing
Precision Engineering Components
Aerospace Components

Function and usage: Industrial grade lithium carbonate is mainly used in steel continuous casting mold slag; in the electrolytic aluminum industry, adding industrial grade lithium carbonate can reduce the volatility, viscosity and melting point of the electrolyte, and improve the conductivity of the electrolyte, thereby reducing heat loss and improving Current efficiency, energy saving and prolonging the service life of electrolytic cells; used to prepare refrigerant lithium bromide; used to prepare lithium chloride as a raw material for metal lithium electrolysis; used to prepare high-purity grade lithium carbonate and pharmaceutical grade lithium carbonate; Used in glass, ceramics, enamel and enamel, etc.

Storage and use: Avoid contact with eyes, skin and clothes; keep away from strong acids and strong oxidizing substances, and store in a ventilated, dry and airtight manner.

Packing: paper-plastic composite bag lined with 2 layers of PE bag, 25kg/bag or as customer's request.

Shipping: The product is not classified as a hazardous chemical and is suitable for shipping by sea, rail, air and road. Pay attention to moisture-proof and acid-proof during transportation.

Silicomanganese Slag
Felman Production generates a residual commercial by-product, silicomanganese slag, through the production of Ferro Silicomanganese (FeSiMn). The slag is an inert solid green material consisting primarily of aluminum, manganese, magnesium, silicon, and calcium oxides.

Production
The slag is generated during the production of ferro silicomanganese using electric arc furnaces. The molten slag is casted, cooled by spraying it with cold water, and then crushed to the desired size.

Potential Uses
Potential uses of the commercial by-product include re-melt/reproduction, industrial fill, road base, textiles manufacturing, etc.

Chemical Composition
Below please find the available metals totals for the chemicals that were detected as components of the slag material. The material is considered non-hazardous as shown by Toxicity characteristic leaching procedure testing conducted on the material. A qualified and licensed environmental laboratory is currently conducting a general assay of the material to determine the % w/w of the different chemical components.

TCLP Testing of Slag
Chemical Slag Leachate RCRA Hazardous
Waste Limits
mg/L mg/L
Arsenic ND 5.0
Barium 0.85 100.0
Cadmium 0.0011 1.0
Chromium 0.02 5.0
Lead ND 5.0
Mercury ND 0.2
Selenium ND 1.0
Silver ND 5.0


Slag Available Metals Totals
Chemical mg/kg
Aluminum 88,900
Barium 5,590
Calcium 151,000
Iron 7,230
Magnesium 28,400
Manganese 85,000
Potassium 12,200J


Physical Aspects of the Material
The material is a hard solid stone that has irregular fracturing similar to chert or glass. The material is primarily green, gray, and black in color and is odorless. The bulk density of the material is approximately 635 +/- 100 kg/m3.

Material Size: Generally, one-to-four-inch stone, but can be crushed and sized to the clients desired specifications.

We supply and export FerroNickel Electrofurnance Slag. Our Slags are registered under REACH regulation. Conditions are FOB Durr�«s Port in Albany.

Application:
Sandblasting / High density submarine oil and gas pipe coating aggregate / Additional iron to clinker (Substituting the raw material in cement industries with our slag allows deduction of the ton of CO2 that plants would otherwise have accounted in their carbon balance) / Railway ballast / High strength concrete / Beach aggregate / Granular base for road construction.

Most common ingredients:
Ingredient and Content Classification (CLP)
Silicon Dioxide 30 - 50%
Iron 15 - 35%
Magnesium Oxide 13 20%
Aluminium Oxide 1 4%
Chromium (III) Oxide 1.4 3%
Nickel < 0.15%
Sulfur 0.1%
Calcium oxide 3 5%

We Have Lead Ore Of Nigeria Origin From Pb 30% - Pb 60%

This offer is from a subsidiary of JFE Holdings, Inc. (JFE Jeiefu H�rudingusu Kabushiki-gaisha). There is no intermediary between us and the subsidiary.

If interested, end user must indicate the following:
1. Quantity(Monthly)
2. Destination
3. Use of product

Seller is willing and able to send 5-10 kg free sample to buyer to examine.

Attached are the pictures of our manganese slag, one is piled up state and the other to give rough image of its size and color.

Ferro Manganese Slag
Product specifications
Mn : 6.6 %
SiO2 : 28.5 %
CaO : 37.5 %
MgO : 10.6 %
Al2O3 : 8.9 %
Fe : 0.03 %
Size
-75mm (75mm under)
Packing
Product is usually delivered as bulk. Packing in big bags and other packaging is on request.
Origin of product
Japan

Due to Japanese safety regulation and customs procedures reasons, client/buyer must please clarify the purpose or the use of this material.

1.- PRICE: 40,00 US$ per ton
2.- PRODUCT: Electric steelmill slag (iron slag)
Mining material from primary metallurgy or smelting of raw
materials that are generated in electric arc furnaces.
5.-SPECIFICATIONS: Contained in the Attached Technical Sheet
6.- MONTHLY SUPPLY
AMOUNT
100,000 metric tons or more monthly. (Shipment 25.000 MT)
7.- TOTAL AMOUNT OF
ANNUAL SUPPLY 1,200,000 metric tons per year, at a rate of 100,000 MT per
month.
The selling company is capable of supplying, through a firm,
definitive and direct sale, the amount of one million two
hundred thousand metric tons (1,200,000 MT) per year. In the
event that the buying company decides to buy a smaller
volume of the product, it could do so, from a minimum of four
hundred thousand MT (400,000 MT), for its withdrawal within a
period of four (4) months, from the date of the respective
contract, because the company has a monthly supply capacity
of 200,000 tm of said product

Iron Silicate is appreciated for its hardness. The products are made up of best quality granulated slag in order to maintain their adherence to universally accepted norms. The offered product is widely demanded in domestic as well as international markets.

Slag is used in Roofing Granules, Pipeline Blasting, Corrosion Cleaning, Garment & Textile Blasting, Jeans & Clothing Sandblasting, Golf Course Filler, Paints and Coatings, Sandblasting, Surface Prep, Grinding Wheels, Offshore oil pipeline blasting, Blast Cleaning, Asphalt anti-skid additive and many more.

Electric Arc Furnace steel Slag
Presentation: 2cm to 5cm pieces (rocks)
Pozzolan if pulverized to 200 Mesh

Oxide Wt% At%
MgO 6,57 11,72
Al2O3 7,80 5,50
SiO2 18,81 22,50
P2O5 0,98 0,50
SO3 0,41 0,36
CaO 35,03 44,90
TiO2 0,53 0,47
Cr2O3 0,28 0,13
MnO 1,02 1,03
Fe2O3 28,54 12,85

Mine dryer is a core supporting equipment in mining, building materials processing, environmental protection and other fields. It is mainly used for drying materials such as ore, slag, coal slurry, river sand, sludge, etc. By removing moisture from the materials, it improves their subsequent processing efficiency, storage stability or resource recovery value. It is an indispensable equipment in the mining industry chain.

working principle
Adopting a tilted drum and copying board design, the material is lifted up by the copying board as the drum rotates inside, and fully contacts with hot air to complete drying. Suitable for various types of materials such as quartz sand, coal slurry, slag, etc., for example, a 1.5 Ã?? 10 meter drum dryer can reduce the moisture content of quartz sand from 30% to below 1%. After drying, the particles are uniform and free of lumps, which does not affect the subsequent processing accuracy

70M - 3 Ply Surgical Masks; OTG L.A.; Price: US$0.11 EA