EN590 diesel CIF with escrow payment procedure:
Seller / Buyer Financial Commitment * The Buyer Physically Visits The Seller's *Escrow/fiduciary Office* In **United Arab Emirates, Indonesia, China Or Rotterdam** * The Buyer Deposits A *5% Financial Guarantee* Into The Seller's Escrow/fiduciary Account
To Cover The First Or Annual Shipment As A Performance Guarantee. * The Seller Issues A Corresponding *5% Performance Bond* Into The Same Escrow/fiduciary
Account. * Failure By The Seller To Issue The 5% Performance Bond Within The Contractually Agreed Timeframe Constitutes A Breach, And The Seller Shall Pay An *agreed Security Guarantee Fee*
To The Buyer As A Penalty
1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along
with their Tank Storage Agreement "TSA".
2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial
invoice to the seller along with an Acceptance Letter of the sales and purchase procedure.
3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port
authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all
parties only if buyer's TSA is engaged, not active or cannot be verified with the local port
authority).
4. Seller issues all POP documents below to the buyer upon a successful verification and approval
of the buyer TSA or after receiving the TTIA fully signed by all parties:
a. Injection Report.
b. Product Passport.
c. 24 Hours SGS Report.
d. Product Certificate of Origin.
e. Tank Storage Receipt (TSR).
f. Authorization to sell and collect.
g. Unconditional Dip-Test Authorization.
h. Product Title Holder Transfer Agreement.
i. NCNDA/IMFPA.
5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense.
6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage
Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by
buyer storage facility and then injects the product into buyer's tanks.
7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder &
Ownership of the product to the Buyer.
8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to
Buyer for processing.
9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts
according to the signed NCNDA/IMFPA.
EN590 10ppm & Jet Fuel A1 available .Tank to Tank procedure :
TRANSACTION PROCEDURES FOR FOB â??TTTâ??
(TANK-TO-TANK)
1. Buyer issues ICPO together with tank storage agreement (TSA) for
seller approval.
2. Seller issues Commercial Invoice (CI), ICC WARNING LETTER for the
available product quantity in the
storage tank in the terminal port.
3. Buyer signs and then returns the commercial invoice with NCNDA/IMFPA
signed by all buyer Groups
with commission structures.
4. Seller Issue (3 DAY unconditional Dip Test Authorization (DTA) to be
endorsed by Sellerâ??s Company,
Buyerâ??s Company and Buyerâ??s chosen Logistic Company. Upon confirmation
of the signed unconditional
Dip Test Authorization (DTA) by both parties, Seller programs the
injection and then issues buyer the
following documents.
A.FRESH SGS REPORT INSPECTED IN LOADING TERMINAL PORT.
B.TANK STORAGE RECEIPT (TSR) WITH GPS COORDINATES).
C.AUTHORIZATION TO VERIFY (ATV).
D.INJECTION REPORT SHORE TANK.
E.CERTIFICATE OF ORIGIN.
F.AUTHORIZATION TO SELL & COLLECT (ATSC).
5. Buyer upon physical verification of the product and PPOP
confirmation, contracts SGS to conduct the
Dip test in Seller Storage Tank on Buyerâ??s expense.
6. Upon successful Dip Test, Buyer presents the tank storage receipt
(TSR).
7. Seller commences injection immediately into buyer tank and â??issues
buyer Title of Ownership
Certificate to be followed by all export Documentation.
8. Buyer makes payment by MT103 or TT wire transfer for the total
product and lifts the product, andseller pays all
intermediary involved in the transaction
1. Buyer issues ICPO containing the seller's procedure with banking details and scan of buyer's passport along with (TSA) Tank Storage Agreement (TSA) from buyer's Logistic Company.
2. Seller issues Commercial Invoice (CI) for the available products in Tank at the Port, for Buyer's review and endorsement.
3. The Seller's verify Buyer's Tank Storage Agreement (TSA). Upon approval releases POP documents to Buyer's Secure email.
a) Copy of Legalized Commercial Invoice.
b) Copy of Commitment to Supply.
c) Copy of injection report
d) Copy of Fresh SGS (Not Older Than 48 hrs.)
e) Copy of ATSC - Authorization to Sell & Collect
f) Copy of Authorization to Verify (ATV) VERIFY PHYSICALLY
g) Copy of UNCONDITIONAL Dip Test Authorization (DTA)
h) Copy of Commitment Letter to Supply
i) Copy of Export license.
j) Copy of Statement of Product Availability.
k) Copy of Tank Storage Receipt (TSR) with barcode and GPS coordinates.
l) Copy of NCNDA/IMFPA
4. The Buyer Conducts Dip Test in the product in the seller's tank.
5. Buyer provides Authority to Inject (ATI) for seller commence Injection of Product into the Buyer's Tank.(Or seller provides Injection schedule)
6. Buyer make payment Within Twenty-Four (24) Hours after injection completion Via TT wire transfer to seller's account.
7. Buyer lifts products and all intermediaries are paid, Seller and Buyer consider and sign further contracts after a successful Transaction
8. The Seller issues the Title of Ownership certificate and all relevant export documentation.
1. Buyer issues ICPO containing the seller's procedure with banking details and scan of buyer's passport along with (TSA) Tank Storage Agreement (TSA) from buyer's Logistic Company.
2. Seller issues Commercial Invoice (CI) for the available products in Tank at the Port, for Buyer's review and endorsement.
3. The Seller's verify Buyer's Tank Storage Agreement (TSA). Upon approval releases POP documents to Buyer's Secure email.
a) Copy of Legalized Commercial Invoice.
b) Copy of Commitment to Supply.
c) Copy of injection report
d) Copy of Fresh SGS (Not Older Than 48 hrs.)
e) Copy of ATSC - Authorization to Sell & Collect
f) Copy of Authorization to Verify (ATV) VERIFY PHYSICALLY
g) Copy of UNCONDITIONAL Dip Test Authorization (DTA)
h) Copy of Commitment Letter to Supply
i) Copy of Export license.
j) Copy of Statement of Product Availability.
k) Copy of Tank Storage Receipt (TSR) with barcode and GPS Coordinate.
l) Copy of NCNDA/IMFPA
4. The Buyer Conducts Dip Test in the product in the seller's tank.
5. Buyer provides Authority to Inject (ATI) for seller commence Injection of Product into the Buyer's Tank.(Or seller provides Injection schedule)
6. Buyer make payment Within Twenty-Four (24) Hours after injection completion Via TT wire transfer to seller's account.
7. Buyer lifts products and all intermediaries are paid, Seller and Buyer consider and sign further contracts after a successful Transaction
8. The Seller issues the Title of Ownership certificate and all relevant export documentation.
646 Petroleum Oil Related Products Suppliers
Short on time? Let Petroleum Oil Related Products sellers contact you.
1. Buyer issues ICPO containing the seller's procedure with banking details and scan of buyer's passport along with (TSA) Tank Storage Agreement (TSA) from buyer's Logistic Company.
2. Seller issues Commercial Invoice (CI) for the available products in Tank at the Port, for Buyer's review and endorsement.
3. The Seller's verify Buyer's Tank Storage Agreement (TSA). Upon approval releases POP documents to Buyer's Secure email.
a) Copy of Legalized Commercial Invoice.
b) Copy of Commitment to Supply.
c) Copy of injection report
d) Copy of Fresh SGS (Not Older Than 48 hrs.)
e) Copy of ATSC - Authorization to Sell & Collect
f) Copy of Authorization to Verify (ATV) VERIFY PHYSICALLY
g) Copy of UNCONDITIONAL Dip Test Authorization (DTA)
h) Copy of Commitment Letter to Supply
i) Copy of Export license.
j) Copy of Statement of Product Availability.
k) Copy of Tank Storage Receipt (TSR) with barcode and GPS Coordinate.
l) Copy of NCNDA/IMFPA
4. The Buyer Conducts Dip Test in the product in the seller's tank.
5. Buyer provides Authority to Inject (ATI) for seller commence Injection of Product into the Buyer's Tank.(Or seller provides Injection schedule)
6. Buyer make payment Within Twenty-Four (24) Hours after injection completion Via TT wire transfer to seller's account.
7. Buyer lifts products and all intermediaries are paid, Seller and Buyer consider and signing further contracts after successful Transaction
8. The Seller issues the Title of Ownership certificate and all relevant export documentation.
FOB: PROCEDURE TANK TO TANK (TTT)-2
NON-NEGOTIABLE
F.O.B. FREE ON-BOARD TANK TO TANK PROCEDURE (DIP AND PAY)
1. Buyer issues ICPO and Company Registration Certificate or any I.D. With TSA for
seller's verification.
2. Seller issue Draft Commercial Invoice, Buyer signs and returns to Seller with his Tank
Storage Agreement.
3. Seller lease and pays the buyer's tank for 3 days for the tank to tank Injection Process,
Buyer do pay his Tank Farm Company for 2 days after the Tank Farm Company has received
the payment from Seller Company. (Note: If buyer has existing TSR and or buyer can provide
TSR after the sign of commercial invoice on its own, there will be no need for joint payment
for the buyer tanks.
4. Seller provides buyer with FULL POP Documents:
Fresh SGS Report less than 48 hours
Dip Test Authorization-Unconditional
Injection Report
Storage Receipt with GPS Coordinates
Tank Farm Bar-code Information
Letter of Commitment to Supply.
Registration Certificate & Export License Copy
Authority to Sell & Collect (ATSC)
Endorsed Injection Schedule by the buyer & buyer Tank Farm
ATV - For Physical Verification
Irrevocable Commitment to Supply for Spot and 12 months Contract
Injection Schedule signed by buyer & buyer's tank farm
5. Buyer conducts Dip-Test in seller's tank; via SGS on buyer's cost seller inject the fuel
into buyer's tank and Buyer makes payment based on Q&Q by MT103 wire transfer / TT
according to the final Commercial Invoice.
6. Seller transfers the title of ownership as per Buyer's instruction. Buyer lifts the
product.
7. Seller pays all intermediaries involved in the transaction and subsequently monthly
contract shipment continues as per terms and conditions of the sales and purchase
agreement contract between buyer and seller
Product: Jet A1 fuel
Origin: Kazakhstan
QTY: Trial 2million BBL Followed by any qty per month X 12months contract.
Product: Diesel fuel EN590 10PPM
Origin: Kazakhstan
QTY: Trial 100,000. MT Followed by any qty per month X 12months contract.
FOB TRANSACTION PROCEDURES FOR TANK TO TANK DIP& PAY
1) Buyer issue ICPO containing the seller's working procedure and banking details along with company registration
certificate, buyer data page of buyerâ??s Passport with buyerâ??s Nominated TSA for refinery verification and approval.
2) Seller issues commercial invoice (C.I.), buyer signs and return commercial invoice along with an acceptance letter.
3) Seller issues a copy of SGS Report to buyer's Tank Farm Company only to verify SGS Report with a Confidentiality &
Non-Circumvent letter.
4) Upon confirmation of SGS Report by Buyer's Tank Farm Company, Seller request to leases and pays the buyerâ??s tank
for 2 days, and Buyer pays his Tank Farm Company for 3 days after Tank Farm Company confirms the payment from
Seller. A total (5) days of operational TSR will be issued on seller/buyers name for a minimum of XXXX to XXXX GALS /
BBLS / MT.
5) Sellerissuesfollowing POP documentsto buyer:
A. Q&QReport
B. Pre Injection Report(Fromrefinery reservoir to leased tanks)
C. Unconditional Dip test authorization letter (DTA)
D. Authorization to sell
E. FreshUpdate SGS Report
F. Certificate ofOrigin
G. Authorization to verifyphysically the productin seller's tank(ATV)
6) Buyer and his testing teams conducts Dip test on the product and injection commence from seller's tank to buyer's
tank.
7) Upon completion of injection, seller issues full Injection reportto buyer and buyer makes 100% payment via MT103
for the total value of product injected into the tanks.
NOTE: The refinery will provide NCNDA/IMFPA immediately after step No.4 of the procedure.
Lubricating the gears of industry and innovation. Our high-quality oil is engineered to keep machinery running smoothly and efficiently. From automotive engines to industrial equipment, our oil reduces friction, dissipates heat, and protects against wear and tear, ensuring optimal performance and longevity. With a blend crafted for precision and reliability, trust our oil to keep your engines running at their best, powering progress and innovation.
Recommended for structural fire fighting, general fire rescue & bush fire fighting. Made of Vulcanized Rubber (upper part and sole) and woven cotton canvas for extra comfort.
Features:
Sole/Heel:
- Flame-retardant rubber outsole
- Fuel oil resistant
- Slip-resistant
- Excellent abrasion resistance
- Catered to enter high temperature
- Cold insulation
- Steel midsole
Upper construction:
- Flame-retardant upper part with heat insulation
- Waterproof
- High visibility with black and yellow contrast
SN 150 (LVI)
SN 150 (blend, VI 95+)
SN 350
SN 400
SN 500
BS (23-26cst)
BS 150 (28-34cst)
VHVI-4 Tatneft (VI 120+, typically around 130-133)
VHVI-6, VHVI-8 with VI 114-120
Green petroleum coke or green coke was a solid residue carbon substance processed from refinery petroleum. Green coke has higher calorie comparing with traditional steam coal, it can reach 7500-8500 KCal/kg.
Special advantages of using Green Petroleum Coke;
-Has higher calorie value (7500-8500)
-Containing Low ash value
-Very Low Sulphur (S)
We are in connection with one of the largest petroleum coke supplier in the world:
1.Resources: Our raw materials are not only from China, as well as other local refineries, but also from other countries, such as North America, CIS, Middle East and Asia. We can provide the petcoke based on client different requirements.
2.Export Volume: We have been the largest petcoke exporter in China for many years and occupy 40% market share of China total export volume.
3.Logistics: We have a unique advantage in logistics and warehousing, and our main storage bases are located in the Northeast at Panjin port, Shandong at Qingdao & Rizhao ports, Yangtze River at Nanjing & Nantong ports, and in South China at Fangcheng port. We can guarantee the stable quantity.
Commodity : Bitumen 50- 70
Type : Eastern European
Penetration : at 25°C (50-70)
Softening Point : at 0°C (46-54)
Resistance to Hardening : at 1630c
Change of Mass % : Max -0.5
Retained Penetration : Min -50
Softening Point After Hardening : Minimum Deg. C-48
Flash Point Minimum : Deg. C230
Solubility Minimum : %99
Kinematic Viscosity : at 135 Deg. C, Minimum mm2/s 295
Delivery : CIF Paranagua Port
Quantity : 200 Metric Ton (MT) Spot for Test ?? Extension 2000 MT Contract for 12 mos.
646 Petroleum Oil Related Products Suppliers
Short on time? Let Petroleum Oil Related Products sellers contact you.
