Find Verified Metal Handicrafts Suppliers, Manufacturers and Wholesalers

Vessels for TTO/STS EN590 available on regular basis
TERMS OF NEGOTIATION
INCOTERMS: TTO/STS
ORIGIN: EUROPEAN
INSPECTION: SGS, IQS,CIQ OR SIMILAR
INSURANCE: PAID BY SELLER, COVERING 110% OF SHIPMENT VALUE
ACCEPTABLE PAYMENT TERM: MT103/TT WIRE/USDT
COMMODITIES:
DIESEL FUEL EN590 USLD-10PPM/50PPM/500PPM GASOLINE
MINIMUM QUANTITY: 50,000 MT per Month
MAXIMUM QUANTITY: 400,000 MT Per Month
TTO/STS PRICE: USD $470 PER MT GROSS / USD 460 PER MT Net
NON-NEGOTIABLE TITLE/TANKER TAKE OVER PROCEDURE (TTO)/ SHIP
TO SHIP (STS)
1.The Buyer shall issue an Irrevocable Corporate Purchase Order (ICPO),
accompanied by the company's registration certificate and a Guarantee Letter confirming its intention to assume legal title of the product.
2.The Seller shall prepare and submit a draft Memorandum of Understanding
(MOU) to the Buyer. The Buyer shall review, countersign, and return the
executed MOU to the Seller.
3. Upon receipt of the countersigned MOU, the Seller shall provide the Buyer
with the following documentation for verification and confirmation:
A. Vessel Declaration
B. Bill of Lading
C. Loadline Report (Ullage Report)
D. Q&Q Analysis Report at Loading Port
E. Payment Invoice for Title Transfer Approval
F. Cargo Manifest
4. Upon verifying that the submitted documents, Buyer shall proceed to remit
the statutory governmental fee for Ttitle Transfer Approval in the amount of 95,000 via T/T wire transfer within two (2) international banking days. This
amount shall be deducted from the final purchase price.
5. If vessel rerouting is required, Buyer shall authorize the shipping company to
redirect the vessel to the Buyer's preferred port of discharge. The Seller shall
complete the transfer of product title to the Buyer through the relevant
governmental authority and shall issue the following documents to the Buyer:
Freshly dated Dip-Test Authorization (DTA)
Authority to Board (ATB)
Authority to Verify (ATV)
The Buyer shall then appoint SGS or an equivalent inspection agency to carry out the Q&Q analysis.
6. Upon successful completion of the dip test and once the vessel/tanker is
securely moored at the designated dock, the Buyer shall remit the remaining
balance of the purchase price via MT103 wire transfer. Following confirmation
of payment, the Seller shall issue the official Certificate of Ownership to the
Buyer, thereby finalizing the legal transfer of title. Trans-loading shall begin
immediately thereafter.
7. Trans-loading operations shall commence without delay upon confirmation of payment and title transfer.
8. The Seller shall release commissions and any agreed payments to intermediaries involved in the transaction within forty-eight (48) hours of receipt of full payment from the Buyer's bank.
7. Trans-loading commence immediately.
8. Seller will release payments to the intermediaries involved within 48 hours of receiving the Payment for the product from the Buyer's bank.

EN590 10ppm Kazakhstan origin from the largest trusted Refinery in Kazakhstan available for CIF or TTO transactions Very competitive price
TCO CIF

Terms Of Transaction
Delivery Ciftto 1521 Days To Any Safe World Port
Payment Term Dlclc Blcmt 103 Tt Wire
Origin Kazakhstan
Specification To Be Provided Upon Receipt Of Buyers Loiicpo
Inspection Any Universally Accepted Qq Inspection Company
Commission To Be Shared 50 Each By Both Sides
Performance

Bond
2
Procedures Transaction Procedure CIF
1Buyer issues Irrevocable Purchase Order ICPO with buyers banking details
and passport data of buyerrepresentative

2 Seller issues Draft contract for both parties to sign within 24 hours buyer signs and send back
with guarantee letter and proof of funds to fulfil the contractual agreement

3 Seller reissues the Proof of Product documents in buyer companys name as listed below

3 a Certificate of Origin

3 b Product quality passport Analysis test Report Kazakhstan GOST R

3 c Commitment to Supply

3 d Statement of Product Availability

3 e Product Allocation Export Permit

4 Upon verification of the sellers partial POP within seven 7 banking days the buyers bank
sends irrevocable operational DLC via MT700 as per the sellers credit bank account for the first
month fee In the event of the buyers banks inability to issue the letter of credit within seven 7
banking days the buyer will make a guaranteed cash deposit of USD 300000 by TT WIRE bank
transfer to the sellers bank account as security of the product allocation and also to enable the
seller to charter a vessel and start shipping This payment will be deducted from the total cost of
the product after inspection at the port of discharge

5 Upon confirmation of buyers Letter of Credit or Cash Guarantee Deposit payment at sellers
bank seller transfer title holder of the cargo to buyer issue the 2 PB and commence loading of
the cargo into the vessel tanker Upon completion of loading the cargo seller will issue the full
POP and shipping documents to buyer as shown below
Allocation Title Ownership Certificate
TransNeft Contract to transport the product to the loading port
Port storage agreement
Charter party Agreement to transport the product to the discharge port
Tank Storage Receipt
SGS Quality and Quantity Certificate
Bill of Landing
Vessel Questionnaire 88

6 NCNDA IMFPA shall be issued for all BuyerSeller Intermediaries to complete for further
processing by the Seller

7 Shipment shall commence and upon arrival of the vessel tanker at the final discharge port the
buyer shall conduct the SGSCIQ Inspection and make the balance payment for the full shipment
via TT Wire or MT103 TT Wire Transfer

8 The seller pays all buyer and seller intermediaries the full commission amount as stated in the
NCNDAIMFPA agreement

TTT procedure: EN590 10pm price $460/MT, Jet fuel A1 price $76/BBL

(1) FREE ON-BOARD TRANSACTION PROCEDURE - (TANK TO TANK). Rotterdam, Houston, Fujairah, Jurong, Ningbo-Zhoushan

1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along
with their Tank Storage Agreement "TSA".
2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial
invoice to the seller along with an Acceptance Letter of the sales and purchase procedure.
3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port
authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all
parties only if buyer's TSA is engaged, not active or cannot be verified with the local port
authority).
4. Seller issues all POP documents below to the buyer upon a successful verification and approval
of the buyer TSA or after receiving the TTIA fully signed by all parties:
a. Injection Report.
b. Product Passport.
c. 24 Hours SGS Report.
d. Product Certificate of Origin.
e. Tank Storage Receipt (TSR).
f. Authorization to sell and collect.
g. Unconditional Dip-Test Authorization.
h. Product Title Holder Transfer Agreement.
i. NCNDA/IMFPA.
5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense.
6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage
Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by
buyer storage facility and then injects the product into buyer's tanks.
7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder &
Ownership of the product to the Buyer.
8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to
Buyer for processing.
9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts
according to the signed NCNDA/IMFPA.

EN590 FOB TTV Seller Procedure
Origin : Kazakhstan
Loading port: Singapore port
UNIT PRICE : USD 490/MT
PAYMENT TERMS : MT103
TRANSACTION TERM : FOB

1. Buyer accepts seller working procedure and issue ICPO
2. Seller's issues commercial invoice (CI), Buyer signs and returns back commercial invoice.
3. Seller issue TSR with GPS coordinate to Buyer Company,
4. Buyer contacts the Seller's storage facility for tank extension to enable Buyer approval to gain access to the facility and execute the Quality & Quantity Inspection in Seller Tank Farm for FRESH Analytical Report/Result by SGS. ( Note* One day extension fee is 78,000 usd and will be deduct when buyer is paying total amount )
5. After successful DIP test, (NCNDA/IMFPA) will be signed by all parties.
6. Seller injects product into Buyer's vessel or injects into Buyer's tanks Buyer or buyer take over the storage tanks, within maximum 48 hours Buyer pays via MT 103/TT for the spot transaction and seller issues all export documents to buyer.
7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer.

EN590 10ppm & Jet Fuel A1 available .Tank to Tank procedure :
TRANSACTION PROCEDURES FOR FOB â??TTTâ??
(TANK-TO-TANK)
1. Buyer issues ICPO together with tank storage agreement (TSA) for
seller approval.

2. Seller issues Commercial Invoice (CI), ICC WARNING LETTER for the
available product quantity in the
storage tank in the terminal port.

3. Buyer signs and then returns the commercial invoice with NCNDA/IMFPA
signed by all buyer Groups
with commission structures.

4. Seller Issue (3 DAY unconditional Dip Test Authorization (DTA) to be
endorsed by Sellerâ??s Company,
Buyerâ??s Company and Buyerâ??s chosen Logistic Company. Upon confirmation
of the signed unconditional
Dip Test Authorization (DTA) by both parties, Seller programs the
injection and then issues buyer the
following documents.
A.FRESH SGS REPORT INSPECTED IN LOADING TERMINAL PORT.
B.TANK STORAGE RECEIPT (TSR) WITH GPS COORDINATES).
C.AUTHORIZATION TO VERIFY (ATV).
D.INJECTION REPORT SHORE TANK.
E.CERTIFICATE OF ORIGIN.
F.AUTHORIZATION TO SELL & COLLECT (ATSC).

5. Buyer upon physical verification of the product and PPOP
confirmation, contracts SGS to conduct the
Dip test in Seller Storage Tank on Buyerâ??s expense.

6. Upon successful Dip Test, Buyer presents the tank storage receipt
(TSR).

7. Seller commences injection immediately into buyer tank and â??issues
buyer Title of Ownership
Certificate to be followed by all export Documentation.

8. Buyer makes payment by MT103 or TT wire transfer for the total
product and lifts the product, andseller pays all
intermediary involved in the transaction

En590 10ppm Diesel
Vopak-to-vopak Procedure:
1- Buyer Sends Cis + Cp
2- Conference Call /meeting Between Buyer & Seller Where Both The Parties Exchanges
Vopak Tank Coordinates
3- Seller Release Ci, Buyer Counter Signs
4- Seller Releases Full Pop With Fresh Sgs Report
5- Buyer Makes Full Payment Via Mt 103
6- Seller Transfers Title To Buyer
7- Buyer Pays Commission To Intermediaries
8- Seller Issues Spa Contract For 12 Months
Platts {-} Minus 50 U$d Nwe And U$d 10.00 Commission Payable By The Buyer. Hence Net Cost To
The Buyer Will Be Nwe Platts {-} Minus 40 U$d
Product: En590-10ppm
Quantity: 100,000 Mt
Availability: Fob Rotterdam {vopak Tank/s}
Monthly Deliveries In Annual Contract
Conditions: Ncnda { Attached} And Intermediary Services CONTRACT {ATTACHED} will be signed
by the Buyer once their CIS + CP is accepted by the Seller.

Brazil origin Icumsa 45 white refined sugar available for CIF ASWP with price $395/MT, SBLC payment, no upfront payment, no deposit required,

Best deal ever, Refinery offers CIF ASWP with Escrow payment method. No Upfront payment, No sharing of shipping cost. EN590 10 ppm CIF price $400/mt including $10 commission to buyer's side.

Simple Procedure:
1) ICPO
2) SPA
3) PPOP
4) Escrow Agreement
5) Product loading
6) POP with complete shipping documents

En590 Diesel Cif With Escrow Payment

En590, 10 Ppm
Origin Kazakhstan
Quantity 50,000 & Above
Price Price - $420 Gross/ $400 Net Per Mt
Terms Of Transaction
Delivery Cif Any Safe World Port
Payment Term Escrow/ Mt 103 Tt Wire
Origin Kazakhstan
Inspection Any Universally Accepted Q&q Inspection Company
Commission To Be Shared 50% Each By Both Sides
Procedure Transaction Procedure (cif)
1. Buyer Issues Icpo:
2. Seller Issues Draft Spa
3. Buyer Signs Spa And Commercial Invoice
4. Seller Registers Spa:
5. Seller Issues Partial Proof Of Product (ppop)
6. Escrow Agreement And Guarantee Deposit:
�?¢ Upon The Buyer's Receipt And Satisfactory Verification
Of The Ppop, The Buyer, Seller, And An Agreed Fiduciary
(escrow Agent) Shall Jointly Execute A Tripartite
Escrow Agreement.
�?¢ Subsequently, The Buyer Shall Deposit A Guarantee
Deposit Of Usd 360,000.00 Into The Fiduciary's Designated
Escrow Account, Typically Located In Singapore Or
Hong Kong.
�?¢ This Guarantee Deposit Will Be Credited Towards The
Total Cif Value Of The First Shipment.
7. Fiduciary Holds Funds:
�?¢ The Fiduciary Shall Hold The Guarantee Deposit In
Escrow
8. Product Loading, Full Proof Of Product And Shipment:
�?¢ Upon The Successful Completion Of Cargo Loading, The
Seller Shall Issue The Full Proof Of Product (pop) And
Complete Shipping Documents To The Buyer,
9. Transfer Of Title And Off-loading Commencement
10. Final Payment:
Following The Confirmation Of The Vessel Tanker Port
Clearance, The Buyer Shall Make The Balance Payment
For The Full Shipment Via Telegraphic Transfer (tt Wire)
Or Mt103.

Brazil origin Icumsa 45 white refined sugar available for CIF , revolving DLC/SBLC. Seller provides 2% PB, BL, Q88 documents

Looking for buyers of EN 590 Vopak To Vopak transaction in Houston Vopak terminal, price at $560/mt ,

Kazakhstan origin EN590 offer from Kazakhstan Refinery:
FREE ON BOARD (FOB) PROCEDURE
1. Buyer Issues ICPO:
The buyer submits an Irrevocable Corporate Purchase Order (ICPO) with banking details and passport information.
2. Seller Issues Commercial Invoice (CI):
The seller sends a Commercial Invoice (CI) for the available product, which the buyer countersigns.
3. Seller Provides POP Documents:
The seller provides Proof of Product (POP) documents, including:

â?¢ Certificate of Origin
â?¢ Tank Storage Receipt (TSR)
â?¢ Product Analysis
â?¢ Injection Report
â?¢ Authority to Verify (ATV)
â?¢ Refinery Commitment Letter
â?¢ Authorization to Sell and Collect (ATSC)
4. Buyer Verifies POP:
The buyer contacts the tank farm to confirm product availability.
5. Payment & Dip Test:
The buyer pays for a 5-day tank lease, and the seller issues an Unconditional Dip Test Authorization (UDTA). The tank farm provides a Clearance Access Entrance Permit (CAEP) for the dip test and SGS report.
6. NCNDA/IMFPA Signed:
All intermediaries sign the NCNDA/IMFPA and send it to the seller for endorsement.
7. Sealing & Final Payment:
After a successful dip test, the buyer requests tank sealing. The buyer pays for the full product via MT103/T/T and extends the tank lease for 48 hours.
Payment to Intermediaries:
The seller pays the intermediaries within 48 hours of receiving payment.

EN590 ULSD available in Major Ports for FOB shipping terms, Kazakhstan Origin,
EN590 FOB price is $470/mt including $10 commission to buyer's side.
FREE ON BOARD (FOB) PROCEDURE
1. Buyer Issues ICPO:
The buyer submits an Irrevocable Corporate Purchase Order (ICPO) with banking details and passport information.
2. Seller Issues Commercial Invoice (CI):
The seller sends a Commercial Invoice (CI) for the available product, which the buyer countersigns.
3. Seller Provides POP Documents:
The seller provides Proof of Product (POP) documents, including:
SGS Report
Tank Storage Receipt (TSR)
Product Analysis
Injection Report
Authority to Verify (ATV)
Refinery Commitment Letter
Authorization to Sell and Collect (ATSC)
4. Buyer Verifies POP:
The buyer contacts the tank farm to confirm product availability.
5. Payment & Dip Test:
The buyer pays for a 5-day tank lease, and the seller issues an Unconditional Dip Test Authorization (UDTA). The tank farm provides a Clearance Access Entrance Permit (CAEP) for the dip test and SGS report.
6. NCNDA/IMFPA Signed:
All intermediaries sign the NCNDA/IMFPA and send it to the seller for endorsement.
7. Sealing & Final Payment:
After a successful dip test, the buyer requests tank sealing. The buyer pays for the full product via MT103/T/T and extends the tank lease for 48 hours.
8. Payment to Intermediaries:
The seller pays the intermediaries within 48 hours of receiving payment

EN590 10ppm FOB TTT Procedure:

TRANSACTION PROCEDURES FOR FOB JURONG/QINGDAO PORT TANK TO TANK (TTT)

1) Buyer issues ICPO and certificate of incorporation

2) Seller issues Commercial Invoice (CI) , buyer's signs and returns to Seller with his TSA, Seller verify buyer TANK FARM and make 3days tank lease payment to the buyer tank farm for the Injection Process.

3) Buyer pays his Tank Farm Company for 2 days tank storage costs, after his Tank Farm Company has received the buyer's payment the Seller Company pays 3 days cost (totaling) 5days TSR

4) Seller inject into buyer tank and issues SGS, ATV and Unconditional DTA.

5) Buyer conducts Dip Test and makes the payment for the total value of product injected TRANSACTION PROCEDURES FOR FOB JURONG/QINGDAO PORT TANK TO TANK (TTT)

1) Buyer issues ICPO and certificate of incorporation

2) Seller issues Commercial Invoice (CI) , buyer's signs and returns to Seller with his TSA, Seller verify buyer TANK FARM and make 3days tank lease payment to the buyer tank farm for the Injection Process.

3) Buyer pays his Tank Farm Company for 2 days tank storage costs, after his Tank Farm Company has received the buyer's payment the Seller Company pays 3 days cost (totaling) 5days TSR

4) Seller inject into buyer tank and issues SGS, ATV and Unconditional DTA.

5) Buyer conducts Dip Test and makes the payment for the total value of product injected into the tanks through the means ofMT103-

6) Seller pays all intermediaries involved in the transaction, and subsequently monthly shipment continues as per terms and Conditions of the sales and purchase agreement contract between buyer and seller .

Vopak to Vopak deals prices EN590 10 ppm US$ 540/MT, Jet fuel A1 is $82/bbl
Procedure as follows:
*VOPAK TO VOPAK*
*ROTTERDAM ð??³ð??± HOUSTON ð??ºð??¸*

ð??¢ï¸? *EN590 10PPM*
NON SANCTIONED


*PRE QUALIFICATION STEPS*
1. Buyer to provide CIS
2. Upon acceptance, Seller details will be provided for issuance of ICPO

*PROCEDURE*
1. BUYER to issue ICPO addressed to SELLER for verification and approval
2. SELLER to issue CI. BUYER signs and returns CI within 24 hours
3. SELLER to issue Authorization to BUYER for BUYER's Vopak Terminal Manager to communicate with SELLER's Vopak Terminal Manager to verify the existence of the products.This is to allow BUYER to verify fuel is real
4. After confirmation from BUYER's Vopak Terminal Manager, BUYER's Vopak Terminal Manager submits below documents to SELLER's Vopak Terminal Manager:
* Vopak Terminal Agreement or Vopak Reference Code
* Vopak Barcode
5. BUYER finalizes the Vopak Terminal Protocols
6. SELLER to issue Full POP documents to BUYER's Vopak Terminal Manager and injection begins
7. Upon completing the injection, BUYER makes full payment via MT103 TT and SELLER transfers title to BUYER
8. SELLER pays commission to its own intermediaries until the Contract is complete along with all rolls and extensions.

Kazakhstan origin EN590 10ppm 100k mt, en route Singapore ETA 11th June , available for TTO, STS, VTT, TTT,

Origin: Japan
Material: PMMA Sheets off cuts Mix colors
Category: PMMA
Type: Sheets off cuts
Color: Mix colors
Quantity: 22 Tons
Loading weight: 22 Tons
Specification:"PMMA sheets off cuts come from handicraft processing companies, can be granulated.
1 load ready from middle till end of Feb 2025
Subject to unsold"

Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?

1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?

Purity Copper cathodes are at least 9995 pure 
Dimensions Copper cathodes can vary in size but are typically around 914 mm x 914 mm x 12 mm 
Weight Copper cathodes can weigh around 125 kg per sheet 
Electrical resistivity Copper cathodes are tested for electrical resistivity using Test Method B 193 
Composition Copper cathodes contain trace amounts of other elements such as bismuth tellurium silver and selenium 
Copper cathodes are produced from copper ore through smelting and electrorefining to remove impurities They are the primary raw material for copper rods used in the wire and cable industry Copper is also used in the production of brass copper tubes and copper sheets

Purity Copper cathodes are at least 9995 pure 
Dimensions Copper cathodes can vary in size but are typically around 914 mm x 914 mm x 12 mm 
Weight Copper cathodes can weigh around 125 kg per sheet 
Electrical resistivity Copper cathodes are tested for electrical resistivity using Test Method B 193 
Composition Copper cathodes contain trace amounts of other elements such as bismuth tellurium silver and selenium 
Copper cathodes are produced from copper ore through smelting and electrorefining to remove impurities They are the primary raw material for copper rods used in the wire and cable industry Copper is also used in the production of brass copper tubes and copper sheets

Origin: Japan
Code: 2025598BN
Material: PMMA Sheets off cuts Mix colors
Category: PMMA
Type: Sheets off cuts
Color: Mix colors
Quantity: 22 Tons
Loading weight: 22 Tons
Specification: "PMMA sheets off cuts come from handicraft processing companies, can be granulated.
1 load ready from middle till end of Mar 2025
Subject to unsold"

Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?

1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?