Printing Method
Printing Technology FINE: Full-Photolithography Inkjet Nozzle Engineering
Maximum Resolution 2400 x 1200 dpi
Ink Type Pigment-based
Ink Cartridge Configuration 8 individual cartridges
Number of Nozzles 1,536 nozzles x 12 channels
Total: 18,432
Minimum Ink Droplet Size 4 pL
Media Handling
Paper Handling Front-loading roll feed (one roll, front output)
Front-loading manual feed (front output)
Multifunction roll system (second roll, bi-directional take-up system)
Media Width 8-44" / 20.3-111.8 cm
Borderless Printing Width 10" / 25.4 cm, 14" / 35.6 cm, 17" / 43.2 cm, 24" / 61 cm, 36" / 91.4 cm, 42" / 106.7 cm, 44" / 111.8 cm, B2 20.3" / 51.5 cm, A1 23.4" / 59.4 cm, A0 33.1" / 84.1 cm, B0 40.6" / 103 cm
Minimum Length 8" / 20.3 cm
Maximum Length Roll Paper: 59' / 18 m
Cut Sheet: 63" / 160 cm
Media Thickness 2.8-31.5 mil / 0.07-0.8 mm
Margins Roll Paper
Top: 0.12" / 3 mm
Bottom: 0.12" / 3 mm
Side: 0.12" / 3 mm
Borderless
Top: 0" / 0 mm
Bottom: 0" / 0 mm
Side: 0" / 0 mm
Cut Sheet
Top: 0.12" / 3 mm
Bottom: 0.79" / 20 mm
Side: 0.12" / 3 mm
Maximum Roll Diameter 6.7" / 17 cm
Core Sizes 2 or 3" / 5.1 or 7.6 cm
Connectivity
Interfaces USB 2.0
Ethernet (10/100/1000Base-T/TX)
Wi-Fi (IEEE 802.11b/g/n)
Direct Printing USB
Wi-Fi
OS Compatibility Windows 70, 8.1, 8, 7, Vista (32/64-bit)
Mac OS X 10.7.5-10.11.x
Memory 3 GB
Hard Disk Capacity 320 GB
Print Languages Swift Graphic Raster (SGRaster)
Physical
Control Panel 3.5" / 8.9 cm color touchscreen LCD
Power Requirements 100-240 VAC
Power Consumption Maximum: 107 W
Standby: 1.8 W
Off: 0.5 W
Certifications ENERGY STAR
RoHS Directive
Acoustic Noise 49 dB(A)
Operating Conditions Temperature: 59 to 86�°F / 15 to 30�°C
Humidity: 10 to 80%
Dimensions 46 x 62.7 x 38.7" / 116.8 x 159.3 x 98.3 cm with basket open
Weight 267 lb / 121 kg
This printhead GEN5 (MH5420/5440) is suitable for Mimaki JFX500-2131 & UJV500-160 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022626 replacing M013497, M016979 and M015068).
The following items are expressly excluded from warranty coverage:
defects in printers related, in any way, to the use of any non-original or DIGINK inks or ink cartridges and nozzle clogging
defects related to misuse, abuse, accident, neglect, lack of use, or improper storage when not in use for extended periods
defects related to failure to perform periodic maintenance as specified in the user documentation; operation for unintended purposes
defects related to improper loading of media
all other defects, failures or damage not considered manufacturing defects
defects related to third-party applications, software, parts, components, or peripheral devices, including any bulk ink system.
defects that are merely cosmetic in nature.
Product Specifications
Dimensions: 89 x 25 x 69 mm (excluding cables)
Head materials: SST, Nickel alloy and Epoxy Adhesive
Nozzle plate surface: Coated SST
Number of nozzles: 4 x 320 nozzles
Nozzle spacing: 0.1693 mm
Nozzle density: up to 600 npi
Piezo yype: D33 Stacked PZT
Temperature control: Integrated Heater and Thermistor
Operator temperature range: Up to 80�° C
Native drop volume: 7 pl
Drop volume range: 7 - 35 pl
Drop velocity: 7 m/s
Jetting frequency: Up to 60 kHZ
Life: 100 billion actuations per nozzle
This printhead carries a manufacturer warranty.
Country of origin : Japan
Compatible firmware:
UJV55-320 FW Ver. 2.5 or later
SIJ-320UV FX Ver. 1.90 or later
SWJ-320EA FW Ver. 1.30 or later
UJV500-160 FW Ver. 2.00 or later
JFX500-2131 FW Ver. 3.40 or later
More Information Please Visit our website official store GAOLITOPRINTER,
many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys
, Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
This main board IPB100 is suitable for Seiko ColorPainter 100S printers.
This is the original Seiko part (number U00097340501 replacing number U000973405**).
SKU: U00097340501
Manufacturer part number: U00097340501
Intuitive touchscreen display: Control all scanner functions with a touch interface for unparalleled ease of use and control
Small and compact: With a size of only 9.5 x 8 x 4in and a weight of just 11lbs, the Focus3D is the smallest 3D scanner ever built
Integrated color camera: Photorealistic 3D color scans due to an integrated color camera featuring an automatic 70 megapixels parallax-free color overlay
High-performance battery: Integrated lithium-ion battery provides up to fve hours of battery life and can be charged during operation
Data management: All data is stored on a SD card enabling easy and secure transfer to a PC. Using SCENE WebShare, images can be shared on the internet
Compass: An electronic compass is now included within the unit to associate directional data to your scans and facilitate the auto-registration process
Height Sensor (Altimeter): Each scan now includes height information which can be used to scan different foor levels in a building. The data can then be used to differentiate the ?oors
Dual Axis Compensator: To minimize the number of targets needed, the dual axis compensator enables every scan to have integrated level information
WLAN (WiFi): WLAN remote control permits you to start, stop, view or download scans at a distance
GSSI SIR 4000 control unit
1600 MHz or 2600 MHz antenna
Model 615 handcart with encoder
7 meter control cable
Rugged carrying case
2x batteries and charger
2 year GSSI warranty
GSSI SIR 4000 control unit package includes
SIR 4000 Control Unit
1600 MHz or 2600 MHz antenna
Model 615 handcart with encoder
7 meter control cable
2x Lithium-ion battery, Dual-bay battery charger
Rugged transit case
2 year warranty
RADAN 7 Software
Accessories: Palm Antenna, SIR 4000 stand, SIR 4000 carry harness
2 year GSSI warranty
GSSI StructureScan Pro SIR-4000 is typically used to Scan for rebar, post-tension, conduits, and non-metallic objects, Concrete slab scanning, Locate voids, Concrete imaging, Condition assessment, Structural inspection
