Hello,
I Hope you are keeping well . is a leading supplier of MI 17 - MI 35 new / used helicopters and spares or Overhaul kits (Military & Civil variants) / OVERHAULING
DESCRIPTIONï
Four cylinders,horizontally opposed engine,aircooled,single magneto ignation,wet sump pressure lubrication
FEATURERSï
1.The ratio of power weight is higher.
2.Extremely low failure rate.
3.Turbo charger,full take off power up to 3500 meters.
TECHNICAL DATA:
Maximum Power 64 kW/87 HP at 3200 rpm
Displacement 2424 cm3 / 147.91 cub. in.
Compression ratio 8.5:1
Two carburetors
Fuel min. octane 98 RON (Unleaded) / AVGAS 100 LL
Dry weight 82 kg, plus accessories
Fuel consumption 14L/hour
APPLICATION:
Used for fixed wing, manned/unmanned, helicopter, gyrocopter, sailship.
OTHER INFORMATION:
We can provide propellers, generators(for UAV), start-generators and other accessories.
Product Featureï
1,Designed for unmanned aerial vehicle (uav)
2,The ratio of power weight is higher
3,Extremely low failure rate
Product Specificationï
Power: 16 kW / 7200 rpm
Displacement: 274 cm3
Weight: 7.8 kg with magneto ignition
Fuel: 90 RON (unleaded) / AVGAS 100 LL - oil mixture
1:25 for mineral oil or 1:50 for synthetic oil
Optional accessories:Electric starter,Shielded ignition leads,Exhaust stacks (stainless steel 150mm long, 2 needed),Generator 28V/1200W2,Generator coupling kit (engine side),Certificate of Conformance / Test - run
Application:
Remote control airship,fix wing plane,helicopter,sailship etc.
Other Information:
We can also provide propellors for L275E engine,such as 27*20,28*20,34*10,34*12,also we can provide generator and other accessories.
391 Helicopters Suppliers
Short on time? Let Helicopters sellers contact you.
DESCRIPTION
Four cylinders,horizontally opposed engine,aircooled,single magneto ignation,wet sump pressure lubrication
FEATURERS
1.The ratio of power weight is higher.
2.Extremely low failure rate.
TECHNICAL DATA:
Maximum Power 44 kW/60 HP at 3600 rpm
Displacement 1680 cm3 / 102.52 cub. in
Compression ratio 8:1
Two carburetors
Fuel min. octane 98 RON (Unleaded) / AVGAS 100 LL
Dry weight 73 kg, plus accessories
Fuel consumption 10L/hour
APPLICATION:
Used for fixed wing, manned/unmanned, helicopter, gyrocopter, sailship.
OTHER INFORMATION:
We can provide propellers, generators(for UAV), start-generators and other accessories.
we have for sale Helicopters Mi8 / Mi17.
- Sale helicopter engines D3-117D 02-s, refurbished and with warranty...
- If you have engines that need renovating, we renovate them and offer you a warranty.
- Sale - spare parts for all Helicopters type Mill - Mi 8/Mi17 engines and parts, etc.....
Awaiting your answer.
This helicopter is designed for indoor and outdoor flight. Emitter adopt newest 2.4g make band pair technology, could auto make band pair, separate and exact make band pair. After making pair, you can fly helicopters at same time.
Product: al-ztw80a sbec
Code: 3080201
1.Specification: 1.1 output :continuous current 80a , burst current 90a for 10 seconds1.2 battery cell :5-18nc/2-6lipo1.3 weight :87g1.4 bec output :5v/2a1.5 size :68*37*17mm(l*w*h)
2. Features: 2.1 extremely low internal resistance2.2 super smooth and accurate throttle linearity2.3 safety thermal over-load protection2.4 auto throttle shut down in signal lose situation2.5 supports high rpm motors2.6 power arming protection (prevents the motor from accidentally running when switched on)2.7 new advanced programming software
- Sale helicopter engines TV3-117VM 02-s, refurbished and with warranty...
- If you have engines that need renovating, we renovate them and offer you a warranty.
- Sale - spare parts for all Helicopters type Mill - Mi 8/Mi17 engines and parts, etc.....
The talon receiver was designed to give the end user an option to use a field maintainable, self-sealing device that could replace pad eyes and is only usable with the appropriately sized talon fastener.
The talon receiver is installed flush with the deck, once the talon fastener is removed, nothing remains above the deck and the self-sealing talon receiver automatically prevents debris and liquid from entering.
No more engineering or labor cost associated with installation or removal of pad eyes multiple times.
No more tripping or safety hazards associated with pad eyes or obstructions above the deck.
The talon receiver is perfect for hot work applications where welding is not a safe or viable option.
The talon fastener was designed to give the end user the ability to install a bolt where access to the rear of the bolt is unavailable for the placement of the nut (i.E. Walls, tanks, floors, etc).
For additional safety, the talon fastener has a built in, spring loaded locking device to prevent accidental release of the fastener after installation. This provides the end user with a visual indication when the talon fastener is properly engaged.
Having the ability to provide quick and secure attachment points, utilizing a single person, equates to savings by reducing material and labor cost.
