Find Verified Electric Reactors Suppliers, Manufacturers and Wholesalers

Reactors are designed, manufactured and supplied in accordance
with GOST R 52630 : 2006, OST 26.291â??94 and/or EN 13445 4:2002, ASME Section VIII Div.1&2. Criteria for selection of materials for manufacturing of
reactor shells and piping are based on rich practical experience of AEM specialists in the sphere of oil refining, chemical and power units. Vessel designs may be complemented with other elements depending on input technical requirements and process parameters as defined at design stage

Types ofreactors
Hydrotreate rs
Reformers
Isomerization reactors,

Technical specifications
Diameter: up to 5000 mm Nominal
pressure: up to 20 MPa
Wall thickness : up to 300 mm
Design fluid temperature: up to 550C
Material: single metal plated with corrosion resistant material, type
08�¥18�?10�¢, 0813, or other as required by technical design
Internals UOP, AXENS, RIFING, etc.
Service life : 30 years

Application:

Distillation

Azeotropic distillation (phase separation) in glass overhead (optional)
Evaporation to any desired consistency

Multi-component reactions

Gas dispersion below liquid surface

Extraction multi phase mixture

Crystalization

Refluxing
Common chemical reactions liquid / liquid, liquid / solid

DC reactor can increase the power factor to more than 0.9. Because of its small size, many frequency converters have installed DC reactors directly in the frequency converter. In addition to improving the power factor, the DC reactor can also weaken the impact at the moment when the power supply is just connected. If AC reactor and DC reactor are equipped at the same time, the power factor of variable frequency speed regulation system can be increased to more than 0.95.
Structural design
The DC smoothing reactor is used for the filter circuit at the output side of the rectifier circuit. Because there is a DC current component, the magnetic flux of the iron core works in the first quadrant, resulting in magnetic bias. In order to increase the inductance and prevent magnetic flux saturation, DC smoothing reactors adopt cut iron core and add air gap to lengthen their hysteresis loop laterally, which is a bit like the case of single ended flyback transformer in principle. In this way, when there is a current of the same size, B is small and not easy to be saturated.

High-pressure digestion tank used in the oven, also known as sample dissolver, pressure dissolving bomb, hydrothermal synthesis reactor, digestion tank, PTFE high-pressure tank. The purpose is to use a strong acid or alkali in the tank and a high temperature and high pressure closed environment to achieve the purpose of quickly dissolving insoluble substances.Digest samples when measuring trace elements and measuring elements. Sample pre-treatment digests metals, pesticides, food, sludge, rare earths,
aquatic products, organic matter, etc
Products Description
Product Name:
High-pressure digestion tank
Material:
shell material Stainless Steel, interior material high quality PTFE
volume:
5-1000ml is available
Seal Structure
Inner: sealed by PTFE chamber
Outer: sealed by mechanical thread
Characteristic:
1. High quality 304 stainless steel material
2. Inner chamber is made of high quality PTFE, can withstand high temperature, high pressure and corrosion
3. High vacuum degree sealing design
4.factory with competitive price
5.MOQ is 1, most of products in stock and can dispatch quickly.
MOQ:
1pc

Rachanashakti Fabtech Pvt Ltd offering You Reactor is leak-proof in nature, high-temperature resistance, and low maintenance. We offer these Reactors at a reasonable price.

Wide range of volumes from 0.500KL to 100KL.

Construction Material grade is MS-IS2062, SS304/304L/316/316L, CS-SA516 Gr 60/70, our Stainless-Steel Storage tanks are regarded for their attributes like, Reactors Design Thickness as per Pressure Detail & Design Code: - ASME SEC VIII DIV 1, Good Engineering Practices.

Specifications

We have made Reactors consist of a cylindrical vertical shell with standard Tori spherical/ Ellipsoidal dish on both ends. Connection as per Requirement of Client, Thickness is deepened on diameter, Length of Tank & Working Pressure of Tank

Pressure 0.1 Bar To 350 Bar

Rachanashakti Fabtech Pvt Ltd Provide you Pressure Gauge, Safety Valve, Drain Valve, and all Other Accessories Shakti Engineering. Provide Excellent Finishing, Long Lasting, Easy to clean Tank, Leek Proof Tank.

We Provide Tank with QC Dossier (Hydro test Report, Drawing, Material Test Report, Internal Inspection Report ,1 year Warranty and more detail)

Application industries

�· All Industries

�· Chemical Industries

�· Pharmaceutical Plant

�· Food Plant

�· Process Plant

�· Power plant

Emic vibration test system :

Model: f-600bm/a-e90
Sine force: 600 kgf peak
Random force: 420 kgf rms
Frequency range: 5hz to 2300hz
Max.Stroke: 30 mm peak to peak at no load
Max. Acceleration: 70g at no load
Max. Velocity: 150cm/s
Max. Payload wt: 200 kg
Max. Bare table acc: 70.5 peak
Aramature weight: 8.5kg

Espec temperature & humidity chamber:

Model: pr -3sp
Temp range : -20 degree c to +100 degree c
Humidity range: : 20% to 98% rh
Inside dim:w600 x h850 x d800mm

Stirring type reactor.

Standard: GB10229 IEC289
Basic ordering data:
Rated Voltage: 10KV
Rated Current: 100~1350A
Rated Reactance: 0.35~17.0
Weight: 300~2290KG
Each start running timeú¼Continuous operation time
Starting and Cooling Period
For more in formation pls refer to our website 3w hslec com
And also you can send Email to adazq at live cn to get more information .

Type: CKSC
Standard JB5346 GB10299 IEC289
Basic ordering data:
Rated Capacity: 12~960kvar
Rated Voltage: 6~10KV
Rated Reactance: 0.44~36.29ª+
Weight: 150~3970kg
Rated curren and Max. continuous current
Cooling Methodú¿AN or AFú¬
For more information pls refer to our website 3w hslec com
Also u can add my MSN adazq at live cn to get more information.

Baisc Ordering Data:
Rated Voltage: 6~10.5 KV
Rated Current: 1500~3000A
Reactance Ratio: 6%~10%
Other Special Requirment
For more in formation pls refer to our website 3w hslec com
Also u can add my MSN adazq at live cn to get more information.

Qksgk dry-type air core starting reactor connected in series with ac electromotor, it is used for limiting the starting current of electromotor, reactor will be cut off after electromotor is running. Two ends of three-phase of starting reactor is rated reactance value, and its auxiliary tap is 85% of rated value.



Type qksgk
Standard: gb10229 iec289
Basic ordering data:
Rated voltage: 10kv
Rated reactance: 0.35~17.0ª+
Rated current: 100~1350a
Signle-phase weight: 230~550kg
Each start running timeú¼continuous operation time
Operation site(indoor or outdoor)
For more in formation pls refer to our website 3w hslec com
And you can also send email to me to get exactly informations adazq at live cn

The glass-lined equipment is made by coating the high silicon content enamel onto the surface of metal body and then firing them at high temperature ( ~ 900℃ ) in order to achieve a high adhesive strength of the enamel on the steel basic body. The glass-lined equipment, therefore, has high mechanical features and corrosion resistance. Substituting stainless steel and nonferrous metal equipment, the glass-lined equipment is widely used in fine chemical, pharmaceutical, dyestuff, pesticide, metallurgical and food industries.
Corrosion resistance stability: very high corrosion resistance against inorganic acid, organic acid, organic solvent with different concentration and weak base, but not applicable to alkali, hydrofluoric acid, fluoride-bearing medium and phosphoric acid with concentration above 30% at temperature over 180℃.
Thermal shock resistance: resistance to sudden cooling 110℃, resistance to sudden heating insulation performance: the enamel surface should be strictly tested at 20kv.

2be series water ring vacuum pumps and compressors are the high efficiency energy saving products of our company. It is produced on the foundation of scientific research achievements and production experience for many years, and combined with the advanced technology of import products. It is usually used to pump the gases without small solid granules, and gases that doesn't dissolve in water, and noncorrosive gases, so as to form the vacuum and pressure in the closed container. By changing the structural material, it is also available in aspirating corrosive gas or using the corrosive liquid as the operating liquid. So it is used extensively in many trades such as papermaking, chemical industry, petrol chemical industry, light industry, pharmacy, foodstuff, metallurgy and construction materials, stone implement, coal washing, ore dressing and chemical fertilizer etc..

This series pump is single stage and single acting. It is simply structured and convenient to maintain. It is energy saving and can run stably.Compared with the widely used sk, 2sk and sz series water ring vacuum pump in china, the 2be series pump possesses the notable merits such as the high vacuum degree and the low power consumption etc.. And it is the ideal replacement product of sk, 2sk and sz series water ring type vacuum pump.

2be series water ring vacuum pump assembles with gas-water seperator and is easy to install, operate and maintain.

2.The meaning of model number
Take 2bec-303-0 for example
2bec refers to single stage water ring vacuum pump series.
30 tells the the nominal semidiameter of the impeller is 30cm.
3 is the ratio code of the impeller width and diameter. We can easily see that the ratio is 1 according to the formula below.
1----b/d=0.5
2----b/d=0.75
3----b/d=1
5----b/d=1.2
The last number 0 stands for the min suction pressure is 33mbar.(when the number is 1, it refers to the min suction pressure is 160mbar)

Glass lined storage tank
Glass lined storage tank 100l--50, 000l
Glass-lined reactor
Glass-lined plate type condenser
Graphite heat-exchanger
Glass-lined double cone vacuum dryer


By standard container or lcl

The in-line reactor can be scaled up to any power and size for different production capacity. Each reactor can be connected in series to achieve the designated power.

In-line reactor can increase the chemical activity during at cavitation process.

General Specification :

1) Output power : 1200W
2) Operating Frequency : 20KHz / 25KHz
3) Maximum fluid temperature : 100C
4) Maximum operating pressure : 5 bar
5) Maximum flow rate : 700L/hr/unit

Glass-lined reactors

Zibo zhuoxin pump industry co., ltd, including zibo zhuoxin industrial enamel plant, is a well-known manufacturer of vacuum pumps and glass-lined reactors in china. It consists of 38 professional technical staff as well as modern equipment and complete quality testing system. Now we've obtained patents for many techniques, especially the noise reducer for 2bvc series water ring vacuum pump and compressor, which can not only improve the pump's functional performance and service life, but also delete the cavitation and noise. So it is very popular both in the domestic and international market.
Our principle: live on quality, develop on unity.
Our goal: guarantee the quality and give an absolute satisfaction to clients.
We believe: success=credit+quality+service

Reactor

Iec60289 standards.
As the most famous brand in the field of dry-type transformer in china. It has the advantages of fire retardant, damp-proof, and good radiating ability. And it can go into the center of the load, such as the high-rise buildings, airports, wharfs, electricity plants, residential areas and whole-set substations and other places .Our product's features are as follows:
1.Low losses, low noise, low temperature rise
2. Better overload capacity
3. Intergrated intellectual interface is equipped.
Normal conditions:1) altitude: 1, 000m (must be for indoor or outdoor use)2) highest ambient temperature: +40pc3) highest annual temperature per day: +30pc4) highest annual average temperature: +20pc 5) lowest temperature: -5pc6) we can also provide transformers according to customers' requirementsstandards:1) gb6450-86 dry type power transformer2) gb/t10228-1997 technical terms and requirements of dry type power transformer.


Iec

Features

1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle.
2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean.

Technical Data

Glass reaction vessel: 10L;
Jacket capacity: 3L;
High borosilicate glass 3.3;
Kettle body tolerable temperature: -80 to +200 degree;
Kettle body resistance to temperature difference: 90 degree;
Motor power: 90W;
Stirring speed: 50 to 500rpm;
Operating pressure(MPa): Vacuum or normal pressure.

Features

1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle.
2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean.

Technical Data

Glass reaction vessel: 20L;
Jacket capacity: 6L;
High borosilicate glass 3.3;
Kettle body tolerable temperature: -80 to +200 degree;
Kettle body resistance to temperature difference: 90 degree;
Motor power: 90W;
Stirring speed: 50 to 500rpm;
Operating pressure(MPa): Vacuum or normal pressure.

Features

1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle.
2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean.

Technical Data

Glass reaction vessel: 30L;
Jacket capacity: 10L;
High borosilicate glass 3.3;
Kettle body tolerable temperature: -80 to +200 degree;
Kettle body resistance to temperature difference: 90 degree;
Motor power: 90W;
Stirring speed: 50 to 500rpm;
Operating pressure(MPa): Vacuum or normal pressure.

Features

1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle.
2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean.

Technical Data

Glass reaction vessel: 50L;
Jacket capacity: 16L;
High borosilicate glass 3.3;
Kettle body tolerable temperature: -80 to +200 degree;
Kettle body resistance to temperature difference: 90 degree;
Motor power: 120W;
Stirring speed: 50 to 500rpm;
Operating pressure(MPa): Vacuum or normal pressure.

Incorporated in the year 2014, We Treffer Power System Solution Pvt. Ltd. are one of the noted manufacturers, exporters, importers and suppliers of an immersed collection of Power Systems & Solutions. Our product assemblage comprises of Detuned Filter Panels, Filter Panels and Harmonic Filter Panels, which are manufactured with the help of supreme quality raw materials that are procured from our dependable and trustworthy vendors.

Convert plastic waste into carbon-neutral

diesel fuels, Full supply chain program , we

will supply you your waiste plastic, build

your pyrolysis reactor on your land [with

power, water, and mains water output ]

Installed any where in the world, Full

installation and manufacturing of your very

own plant, all work is structurally

guaranteed for 10 years and come with 30 days

free training on how to run the plants

operating procedures and protocols

We are leading mfg and exporter Limpet coil reactor customised as per client requirements

We are leading Mfg and Exporter of Jacketed reaction vessel with capacity from 500 ltrs upto 45000 ltrs

We are mfg and exporter of of High Pressure Stainless Steel Reaction Vessel

Sunkiss matherm was the inventor of the thermal reactor and the first manufacturer who designed an innovating technology for ir radiation, adapting excellently to the requirements of drying, fusing and polymerizing of paints and varnishes. Sunkiss matherm, inventor of the thermoreactor®, was the first manufacturer to create and perfect infrared radiation technology that is particularly suitable for drying, fusion and polymerization. Today sunkiss matherm designs and builds installations for many industrial manufacturers who are looking for savings in time and space, better product finish, energy savings and more flexible operation.
Commercial advantages:
Atex ec certification:
Ce type examination certification by validation of equipment and protective systems intended for use in potentially explosive atmospheres directive 94/9/ec.

Time saving:
Drying time is always one third to one eighth of the normal time because of the rapid rise in temperature and acceleration of evaporation, fusion and polymerization processes.

Space saving:
This saving always results in a more compact and shorter tunnel, which favours installation where space is limited.

Quality:
Improved finished appearance and paint film hardness occur because of core drying, solvent or water evaporation from inside to outside, and also because of the very quick fusion of powder paint.

Freedom from dust:
Dust contamination is avoided by rapid drying.

Solvent vapor removal:
The solvents (vocs) in contact with the thermoreactor® during the drying phase are destroyed by flameless oxidation.

Energy savings:
The reduction in energy consumption, which can be more than 50 per cent, can be explained by the direct transfer of energy from the thermoreactor® to the organic coatings.

Productivity:
Faster throughput resulting in minimal numbers of paint sprayed items queing for thermoreactor® treatment.

Rapidity:
The start-up for a tunnel with a thermoreactor® system is only ten minutes.

Pilot Plant For High Performance Applications Scaling Up To The Kilolab Glass Reactor
We offers a wide range of pilot plants for research and production. The systems are modular, flexible, user-friendly and can be integrated anytime with various accessories.
* Easly configurable range of Pilot Plants from 10 to 100 liters of usable volume .
* Smart supporting structure interely made of AISI 316 Stainless Steel allow the expansion the basic configuration.
* A wide range of instruments from the most reliable brands can be intgrated with the reactor:pH meter,Conducivity meter ,Redox meter, Cristallization monitoring probe etc.
* As option a software running on PC can be supplied for the full logging, the monitoring and the controlling of the connected instruments.
* The unit came standard with secure solvent resistant wheels for extreme flexibility on using the lab or hood space.
* A spill containment tray is part of the basic configuration.

Reactor kits include the following components:
* Support Stand
* Vessel with drain valve
* Shaft and agitator(s)
* Bearing
* Lid with clamp and o-ring
* Overhead stirrer with shaft couplings
* Condenser
* Jacket adapters
* RTD probe adapter

Brief Introduction of the Single Glass Reactor

1. Single glass reactor using borosilicate glass, has excellent physical and chemical properties, bottles and transparent, visible reaction liquid material

2. Stirring tetrafluoroethylene, used in a variety of solvents stirring

3. Motor running smooth, torque, no spark

4. PTFE sealing components, high vacuum

5. Heated oil / water bath with precise control

6. Deconstruction is compact, easy to operate


Function feature of the Single Glass Reactor

1. Distillation, reflux can be achieved simultaneously

2. Special long-term agitation seal

3. GG17 glass and PTFE materials and contacts, no cross-contamination.

4. Digital speed and high and low temperature display, easy operation

Jacket Glass reactor principle is two parts, in the inner glass,the mix bar is continous stirring to make mixing or evaporating reaction under negative vacuum pressue. The stirring is under speed controlling. The jacketed glass could supply heating or cooling material to help the chemical reaction. Recently glass reactors has been widely used in chemical, biological and pharmaceutical experiment and prodcuction.
Brief Introduction of the Jacket Glass Reactor
The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use (one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional.
The working principle of the series reactor: double-layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat (water, water or hot oil or electric sets) to do heating or cooling; The reaction solution was controlled to evaporate and reflux.

This advanced batch hydrogenation reactor delivers unmatched flexibility and control.

Designed to operate safely under high pressure (configurable to meet your specific requirements), it enables faster reaction kinetics, higher conversions, and access to chemistries impossible at lower pressures.

The robust vessel construction ensures reliability for critical catalytic hydrogenation processes, maximizing catalyst efficiency and lifespan.

Volume: 5/10/20/25/30L (customizableï¼?
Material: 316L (other special materials customizable)
Structure: Flange type, customizable
Heating method: electrical heating, circulating oil heating.
Structure: fixed vessel lid, vessel body is lifted up and down.
Temperature: RT-300C (customizable)
Pressure: -0.1~10MPa (customizable)
Agitation Method: mechanical stirring.
Interfaces on the lid: temperature sensor, pressure gauge & rupture disc, gas inlet, vent, spare port,
Power Supply: AC220V, 50HZ/60HZ
Control: Touch screen control, PID self-tuning temperature control.

Expandable Functions
Isobaric Feeding: Add liquid reactants during reaction (controlled total volume)
High-Pressure Feed Pump: Introduce liquid reactants during reaction (precise flow rate control)
Gas Mass Flow Meter: Accurately measure cumulative gas flow and instantaneous flow rate
Built-in Cooling Coil: Enables rapid internal reactor cooling
Condenser: Provides condensation reflux or solvent recovery functionality
Process sampling function: rapid sampling and analysis during the reaction process.

Key Advantages for Your Lab or Pilot Plant
High-Pressure Expertise: Engineered for demanding conditions, this high pressure hydrogenation reactor accelerates reactions and expands your synthetic capabilities.

Precision Batch Processing: Ideal for R&D, process development, and lab or pilot plant scale production, offering complete control over reaction parameters (Temperature, Pressure, agitation, dosing).

Optimized Catalytic Performance: Designed specifically as a catalytic hydrogenation reactor to ensure efficient gas-liquid-solid contact and maximize catalyst utilization.

Enhanced Safety & Reliability: Built with premium materials (e.g., 316SS, Hastelloy) and incorporates critical safety features (pressure relief, leak detection, robust seals) for secure high-Pressure operation.

Full Customization: Available in various sizes (benchtop to pilot scale), materials of construction, pressure ratings (e.g., 100 bar, 200 bar+), agitation systems (magnetic, mechanical), and instrumentation packages.

Scalable Results: Achieve consistent, reproducible results from lab development to pilot production.

We are involved in production of shunt Reactor. It is used in Large Reactor Transformers. We offer shunt reactor in built form / full column as per Customer Specification. We are using unique technology of Edge Chamfering. We can supply cakes with OR without edge chamfer as per customers requirement. Edge Chamfer reduces vibration, noise and in turn improves performance of shunt reactor.

Unique and state of the art edge chamfering technology.
Shunt reactors are produced upto 2500 mm height in single column.
Columns above 2500 mm height will be supplied in 2 parts.
Max. Column Diameter 1200 mm
We use ceramic spacers to maintain air gap.
Steatite and high Alumina ceramics are used.
We make cores up to 400 MVAR 1200 kV class.

Brief Introduction of the Jacket Glass Reactor

The series of reactor kettles is my company according to the actual requirements of customers and the standard production of new double glass reactor with cylindrical glass reactor body, which absorb the international and domestic advantages of similar products, while bold and innovative, not only easy to use (one can easily move, , And the structure of innovative and practical, beautiful appearance generous, leading domestic; for modern chemistry, fine chemicals, bio-pharmaceuticals, new materials, such as the synthesis of experimental and production of the ideal equipment. Specific specifications from 1L to 200L optional.
The working principle of the series reactor: double-layer glass reactor inside the reaction material, but also can be vacuum to do the stirring reaction; sandwich can be connected to heat (water, water or hot oil or electric sets) to do heating or cooling; The reaction solution was controlled to evaporate and reflux.
Main Features of the Jacket Glass Reactor

1, The use of borosilicate glass (GG17 material), has excellent physical and chemical properties.
2, Speed mixing, smooth and reliable operation, torque, no spark.
3, PTFE components mechanical seal, proprietary technology, can maintain the market similar products, high vacuum (-0.095mpa or so), the leading domestic.
4, PTEE discharge valve, kettle body and lid are also customized according to customer requirements.
5, The reaction of the sandwich heating (cooling) solution can be completely removed after the reaction, no solution.
6, Regardless of refrigeration or heating, can be produced according to customer requirements matching products.
7, The overall structure of science, novel, practical, beautiful, leading domestic.

What is a reactor?
The reactor is a comprehensive reaction vessel, and the structure, function and configuration accessories of the reactor are designed according to the reaction conditions.
Pre-set reaction steps can be completed with a high degree of automation from feed-reaction-discharge, which are strictly regulated for important parameters of the reaction process such as temperature, pressure, mechanical control (stirring, blasting, etc.), reactant/product concentration.
Its structure generally consists of kettle body, transmission device, stirring device, heating device, cooling device, and sealing device. Corresponding auxiliary equipment: fractionation column, condenser, water separator, collection tank, filter tank, etc.
Material:SUS304, SUS316L stainless steel
Capacity:customized
Heating:Electric heater heating; Circulation oil heating; Steam heating etc
Application:dairy products, beverage, and pharmaceutical factories.
Advantages
1. Bear higher working pressure and deformation.
2. Fast heating or cooling speed
3. High temperature resistance
4. Strong corrosion resistance
5. Can be customized according to requirements.
� Shandong Qinglei Environmental Technology Co.,Ltd is an equipment manufacturer integrating design, production and assembly. Our products include heat exchangers, heat exchange units, pressure vessels, storage tanks, TCU temperature control systems, reactors, distillation towers, VOCS purification and recovery systems, vacuum frying machine.
If you need any of them,please donâ??t hesitate to let me know,I will reply you ASAP.

Fully automated operations with datalogging, remote access and control
Capacity 8.26 GPM filtrate
Weight Shipping: 11024 lbs
Operating: 51000 lbs
Dimensions 8 ft W x 20 ft L x 8.5 ft H
Membrane ItN Ceramic Flat Membrane Systems
Rack material Stainless Steel
Power 240V, 3PH, 60 Hz, 45 Amps, NEMA 12

Lab glass reactors are the greatest systems for optimizing and reproducing chemical reactions, mixing, dispersing and homogenizing processes on a laboratory scale. Laboratory glass reactors widely accepted as Lab Glass Reactors are known to allow you to have a clear view of the processing of the chemical reactions happening inside the reactor. Lab glass reactors work perfectly with the given atmospheric pressures as well as the vacuum and have significant corrosion-resistant qualities. To get a higher level of productivity, a considerable amount of accuracy, and complete reproducibility.

The best quality lab glass reactors that are linked with the auxiliary equipment, including thermostats, nutsche filters, and gas scrubbers, gives you the guaranteed optimal process performance in the laboratories. The fireproof design and all the fixed materials permit the safe processing of all the solvents as well as the acids in a fully sealed reaction vessel.

We have a wide range of vessel options that you have all the liberty to choose from our standard product range. Apart from the manufacturing of our premium vessels and reactors, we also have expertise in manufacturing the reactors concerning our clientâ??s requirements.

We have a team of skilled engineers who are working day and night and can also help in designing and manufacturing the glass reactors as per our client's requirement.

The OPGW Hardware Fittings are instrument used for surge protection of communication and transmission lines. It replaces the earlier PLCC (using waves as the transport medium) with an optical signal which is faster and distortion free.
a professional manufacturer of OPGW & ADSS cable prefabricated parts with many years of experience. With a factory area of 26,593 square meters, we can produce and transport about 1,000,000 PCS of prefabricated parts (OPGW & ADSS) per year. We have world class certificates such as ISO 9001:2015 certification and are trusted by several companies. More than 15 professional R&D engineers and timely technical support ensure to provide high quality and competitively priced solutions to make customers more profitable in this industry.

The unique design of the lightweight HuaNeng Fitting mechanical suspension supports spans of optical ground wire (OPGW) cables through a wide range of line angle variations. HuaNeng Fitting's mechanical suspension is easy to install while supporting vertical, lateral, and longitudinal unbalanced loads and angular tension without damaging cable strands or affecting fiber performance. Separate bolts
Composition
inner twisted wire, Outer twisted wire, Rubber block and cast aluminum shell.

Uses
To play a supportive role, the optical fiber composite overhead ground wire (OPGW) are hung on a straight line on the tower.