Find Verified Telecommunication Cables Suppliers, Manufacturers and Wholesalers

Multi-Function Digital Audio Optical Transceiver
Introduction
Cybervision CA021 Multifunction digital audio optical transceiver consists of digital audio transmitter CAT and digital audio receiver CAR for transmitting 2 channels analog audio and 1 channel digital audio AES/EBU in high-fidelity. In the process of transmission, analog audio convert to digital audio via A/D, and transmit it in digital method. At the receiving end, it outputs 2 channels analog audio and 1 channels AES/EBU digital audio.

Multi-channels audio optical transceiver with compatibility with analog and digital can be customized.

Features:
1. Be able to transmit analog audio, and digital audio also, automatically identify and switch digital and analog audio at input end, digital signal is priority.
2. Output digital audio and analog audio at same time
3. 24 bit digital decode
4. Audio output balance/unbalance automatically convert; ESD protection, it is more safety and reliable for using
5. LCD in both transmitter and receiver show working status:
1) Optical interface type;
2) laser working wavelength and optical power of transmitter
3) receiving wavelength and optical power of receiver
4) working temperature of optical transceiver and optical modules;
5) Level working status of each channel input/output audio;
6) voltage of dual power supplies for main board;
7) At the optical receiver, the working status and optical link loss of transmitter can be checked
6. System topology can be point to point, point to multi-point
7. Large analog audio dynamic scaleï¼?Max. input/output audio can be up to +18dBm or +24dBm
8. There are LCD for monitoring.
9. There are LED indicators on panel for input/output audio, optical signal, inner statusand, power supply.
10. Power supply support hot back, how swap.

Cybervision CHM-4K series Ultra HD-SDI optical transceiver consists of optical transmitter CHM-4KT and Optical receiver CHM-4KR for transmitting 1 channels 4K ultra HD-SDI signal , or 4 channels 3G ultra HD video, and downward compatible with SD-SDI with bit rate of 143, 177, 270, 300, 1485Mbps etc.

With circuit reducing the signal jitter at CHM-4KR, it can deal with the distorted signal well, it can provide more than 120m automatic balance for 3GMbps signal, more than 250m for 270Mbps signal.

With built-in distribution amplifier, CHM-4KR provides 2 channels output.

CHM-4K supports SMPTE178 standardpassed the test of SDI pathology.
Features:
1. Supports SMPTE424M, SMPTE292M, SMPTE259M
2. Supports 3G-SDI/HD-SDI/SD-SDI/DVB-ASI
3. The best solution for live casting by connecting with 4 channels 3G-SDI
4. With cable equalize at the input/Output, it can make up the loss of cable transmission
5. With circuit reducing the signal jitter, it can deal with the distorted signal well. Input/output cable transmission distance can be up to 120m@3G (BELDEN8281 cable)
6. LCD at both transmitter and receiver show working status, it is convenience to operate and maintain:
1) Optical interface type;
2) laser working wavelength;
3) transmitting/receiving optical power;
4) working temperature;
5) input/output working status of each channel signal;
6) voltage of dual power supplies for main board;
7. With clear working status, there are LED indicators on panel for input SDI signal, optical signal, power supply.
8. Supports SMPTE178 standardpassed the test of SDI pathology
9. Dual power suppliers can be selected, which can supply power independently, backup redundantly
10. Network management can be selected, support SNMP and web monitoring

The equipment is widely used as a termination point for the feeder cable to connect with drop cable. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building. Can be used indoor or outdoor.

FSM-80S fusion splicer is core-to-core alignment single fiber splicer succeeding to 60S.In addition to ruggedized concept,which 60S created,the fusion splicer 80S has a series of new features,such as Automated wind-protector and tube-heater for quicker splicing cycle as well as fewer operation steps,innovative carrying-case design for quicker preparation,powerful Li-ion battey for longer operation,high resolution bigger LCD monitor,and built-in operation manuals in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.

Telecom Pedestal Enclosure

Telecom pedestal enclosures provide superior environmental protection for fiber nodes in fiber, copper and FTTx networks. From fiber-optic flex points that connect services throughout a community, to pedestals that deliver services to individual homes, to dedicated pedestals for cellular sites and multi-tenant applications.

Features
- Provides mechanical and environmental protection of splice and cable storage areas.

- Constructed of non-metallic LLDPE to resist rust, corrosion, and impact. Internal equipment is protected from floods, fires, and wind-blown dust and debris.

- Easy to put the terminal box inside. - Easy to install on the ground.

Application
- Widely used in FTTX Network.

- Telecommunication Networks.

- Data communications Networks and Local Area Networks.

Fiber Optic Cassette
Fibre optic cassettes provide a compact solution for seamless wiring and splicing. Equally important, the design allows the box to extend forward from the chassis. This feature allows easy access to adapters and connectors.Cassettes are available in a variety of fiber types, connector types, and fiber counts.

Applications
Telecom cabinets

Data centers

Customer premises

Local area networks

Wide area networks

Remote terminals

Distributed antenna systems (DAS)

Product Name 10 Pair STB telecom distribution box terminal box Size 320*210*75 mm Packing 50 pcs/CTN . 541 CTNS/20' FCL. IP ground IP65 Suitable STB Module Color White or customized The terminal block of connection adapts for connecting the distributive wires of external and internal padding. Its construction provides the possibility of conducting the control measurements of the connected chains before both directions. Box provides protection from the environmental effects.       The terminal block of connection consists of housing and cover of rectangular form, and also 5- polar unit of connection, fixed on the housing. Cover is fixed beyond the axis common with the housing; however, it can be isolated from the housing for guaranteeing the convenience in the work due to the squeezed conditions. The introduction of wires is accomplished through the detachable stuffing boxes, which ensure the possibility of applying the wires of different sizes. Fastening wires is accomplished by the metallic screws, located inside the unit of connection.

-

100G CWDM 10KM CFP4 Optical Transceiver
ITEM NO.:ECP4XX10A-3LCD10
DATA RATE:100G
WAVE LENGTH:CWDM
DISTANCE:10KM
CONNECTOR:LC
FIRST:SM
DDM:YES
PRODUCT ORIGIN:China
SHIPPING PORT:Shenzhen
Package type: Individual package or 10pcs/package

Features
Compliant with 100GBASE-LR4
Support line rates from 103.125 Gbps to 111.81 Gbps
Integrated LAN WDM TOSA / ROSA for up to 10 km reach over SMF
Digital Diagnostics Monitoring Interface
Duplex LC optical receptacle
No external reference clock
Single 3.3 V power supply
Case operating temperature range:0°C to 70°C
Power dissipation < 6W

Applications 
Local Area Network (LAN)
Data Center
Ethernet switches and router applications

Standard
Compliant to IEEE 802.3ba
Compliant to CFP MSA CFP4 Hardware Specification
Compliant to CFP MSA Management Interface Specification

10G SFP+ CWDM 60km Transceiver 1270~1330nm LC SM Duplex DDM Optical Module