Find Verified Metal Metal Products Suppliers, Manufacturers and Wholesalers

Length: As Required Cu (Min): 99.9% Alloy Or Not: Non-Alloy Ultimate Strength ( MPa): 205 Elongation ( %): 45% Wall Thickness: 0.2mm~910mm Outside Diameter: 2mm*4mm~1016mm*1219mm Processing Service: Bending, Punching, Cutting Standard: JIS ASTM DIN EN ISO Material: C10200/C11000/C12000/C12200/TU1/TU2/T2/custom Surface: Polished Feature: High Strength Technique: Cold Rolled Hot Rolled Size: Custom Size

1, the use of aluminum in the construction industry, because of the stability of aluminum in the air and the excellent appearance after anodizing and is widely used.

2, in the aviation and national defense industry also a large number of aluminum alloy materials.

3. Aluminum cable reinforced by high strength steel wire is commonly used in power transmission.

4. In addition, aluminum and aluminum alloys are widely used in automobile manufacturing, container transportation, daily necessities, household appliances, mechanical equipment and other fields.

Silvery white light metal. It's malleable. Commodities are often made in rod, sheet, foil, powder, ribbon and filament. An oxide film can be formed in moist air to prevent metal corrosion. The aluminum powder and aluminum foil heat up in the air and burn violently, and emit a blinding white flame. Soluble in dilute sulfuric acid, nitric acid, hydrochloric acid, sodium hydroxide and potassium hydroxide solutions, insoluble in water. The relative density is 2.70. Melting point is 660. The boiling point of 2327 . Aluminum is the most abundant metal element in the earth's crust, ranking third only to oxygen and silicon. The development of three important industries, aviation, construction and automobile, requires that the material characteristics have the unique properties of aluminum and its alloy, which greatly benefits the production and application of this new metal aluminum. It is widely used.

Silvery white light metal. It's malleable. Commodities are often made in rod, sheet, foil, powder, ribbon and filament. An oxide film can be formed in moist air to prevent metal corrosion. The aluminum powder and aluminum foil heat up in the air and burn violently, and emit a blinding white flame. Soluble in dilute sulfuric acid, nitric acid, hydrochloric acid, sodium hydroxide and potassium hydroxide solutions, insoluble in water. The relative density is 2.70. Melting point is 660 â??. The boiling point of 2327 â??. Aluminum is the most abundant metal element in the earth's crust, ranking third only to oxygen and silicon. The development of three important industries, aviation, construction and automobile, requires that the material characteristics have the unique properties of aluminum and its alloy, which greatly benefits the production and application of this new metal aluminum. It is widely used.

Processing Service:
Bending, Decoiling, Welding, Cutting
Product name:
Copper Wire Scrap
Copper content:
99.9 % min
Tensile strength:
>1000 RM
Conductivity:
22%- 25%
Color:
Golden
Purity:
99.9%-99.99%
Wire diameter:
0.02mm-6mm
MOQ:
1 Ton
Core material:
copper cable
Surface:
Bright Smooth
Purity: 99.9% MIN Grade: Grade A

Type: Copper wire/copper granules

Delivery time: 20 days

Advantage : High purity, very clean, enough stock

Manufacturer: Great production ability

Wire diameter: 0.30mm, 0.25mm, 0.20mm

Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg

Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2

Mainly Used in making wires, cables, brushes,etc.
Commonly used to make magnetic instruments, such as compasses, aviation instruments, etc.
Can be made into tubes, rods, wires, strips, strips, plates, foils and other copper.
Used in electric power, electronics, energy and petrochemical, machinery and metallurgy, transportation, light industry,
emerging industries and other fields.

Weight of each sheet 125kgs(+/-1%)
Net weight of each pallet 2mts(+/-1%)
Min. weight in each container 20 mts approx
Gross weight of each container 22.20 mts approx
Dimendions 914*914*12
Thickness 0.1mm~200mm.

Loading port Laem Chabang port
Cu (Min): 99.99%
Grade: Pure Copper
Packing 125kg per sheet ,1000 kg per boundle , 19tons per 20 feet container or according to your request
914mm x 914mm x 12mm
Weight per sheet 105Kg (�±1%)
Net weight per pallet 2MT approx
Min, weight per pallet 20MT approx
Gross weight of each contaner 22.2MT approx
Model Number: Copper Cathodes High Grade 99.99%
Mainly Used in making wires, cables, brushes,etc.
Commonly used to make magnetic instruments, such as compasses, aviation instruments, etc.
Can be made into tubes, rods, wires, strips, strips, plates, foils and other copper.
Used in electric power, electronics, energy and petrochemical, machinery and metallurgy, transportation, light industry,
emerging industries and other fields.

Mainly Used in making wires, cables, brushes,etc.
Commonly used to make magnetic instruments, such as compasses, aviation instruments, etc.
Can be made into tubes, rods, wires, strips, strips, plates, foils and other copper.
Used in electric power, electronics, energy and petrochemical, machinery and metallurgy, transportation, light industry,
emerging industries and other fields.

Weight of each sheet 125kgs(+/-1%)
Net weight of each pallet 2mts(+/-1%)
Min. weight in each container 20 mts approx
Gross weight of each container 22.20 mts approx
Dimendions 914*914*12
Thickness 0.1mm~200mm.

Loading port Laem Chabang port
Grade: Pure Copper
Packing 125kg per sheet ,1000 kg per boundle , 19tons per 20 feet container or according to your request
914mm x 914mm x 12mm
Weight per sheet 105Kg (�±1%)
Net weight per pallet 2MT approx
Min, weight per pallet 20MT approx
Gross weight of each contaner 22.2MT approx
Model Number: Copper Cathodes High Grade 99.99%
Mainly Used in making wires, cables, brushes,etc.

Size
Outside diameter 2 to 800mm,
wall thickness 1mm to 220mm,
Length 1 meter to 6 meter.
All sizes can be according to customer's requirements.
Hardness
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard.
Surface
Polished,bright,oiled,hair line,brush,mirror,or as required
Export to
Ireland,Singapore,Indonesia,Ukraine,Saudi Arabia,Spain,Canada,USA,
Brazil,Thailand,Korea,Italy,India,Egypt,Oman,Malaysia,Kuwait,Canada, Viet Nam, Peru
Package
Plastic film with Wooden case or wooden pallet
Delivery time
Prompt delivery or upon your order quantity.
MOQ
Negotiable
Quality Control
Mill Test Certification is supplied with shipment,Third Part Inspection is acceptable.
Application
widely used inair conditioners,refrigerators,electric,solar water heater, polished pipe an be used in decorative,such as stair
rail.
Also can be made according to your required.
Shape
Round, Square, Flat, Hexagon, Oval

Grade

C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920,C10930,

C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300,C12500,C14200,

C14420,C14500,C14510,C14520,C14530,C17200,C19200,C21000,C23000,C26000,

C27000,C27400,C28000,C33000,C33200,C37000,C44300,C44400,C44500,C60800,

C63020,C65500,C68700,C70400, C70620,C71000,C71500,C71520,C71640,C72200


T1,T2,T3,TU1,TU0,TU2,TP1,TP2,TAg0.1,

Shape

Flat plate

Temper

O-H112; T3-T8; T351-T851

Size

thickness 0.3mm~100mm; Width 50mm~2500mm; Length 1000mm~12000mm

Surface

Mill finish, polished, anodizing, brushing, sand blasting, powder coating,etc

Payment terms

T/T,L/C,western union, Paypal

Price terms

CFR,FOB,CIF,Ex-work,CNF

Application

1)Further making utensil.
2)Solar reflective film
3)The appearance of the building
4)Interior decorating:ceilings,walls,etc.
5)Furniture cabinets
6)Elevator decoraction
7)Signs,nameplate,bags making.
8)Decorated inside and outside the car
9)Household appliances:refrigerators,microwave ovens,audio equipment,etc.
10)The consumer electronics:mobile phones,digital cameras,MP3,U disk,etc.

Aluminum is the most abundant metal element in the earth's crust, ranking third only to oxygen and silicon. The development of three important industries, aviation, construction and automobile, requires that the material characteristics have the unique properties of aluminum and its alloy, which greatly benefits the production and application of this new metal aluminum. It is widely used.
Silvery white light metal. It's malleable. Commodities are often made in rod, sheet, foil, powder, ribbon and filament. An oxide film can be formed in moist air to prevent metal corrosion. The aluminum powder and aluminum foil heat up in the air and burn violently, and emit a blinding white flame. Soluble in dilute sulfuric acid, nitric acid, hydrochloric acid, sodium hydroxide and potassium hydroxide solutions, insoluble in water. The relative density is 2.70. Melting point is 660 â??. The boiling point of 2327 â??.


1.the use of aluminum in the construction industry, because of the stability of aluminum in the air and the excellent appearance after anodizing and is widely used.

2. in the aviation and national defense industry also a large number of aluminum alloy materials.

3. Aluminum cable reinforced by high strength steel wire is commonly used in power transmission.

4. In addition, aluminum and aluminum alloys are widely used in automobile manufacturing, container transportation, daily necessities, household appliances, mechanical equipment and other fields.

Whole Dead Ship Scrap

1.85 M Dollars

Will give vessel specs to buyer

Our company PDY Metal Recycling, is a Philippine based ferrous and non ferrous scrap supplier. We are direct from collecting, marketing, packing and trucking.
We are looking for a serious and honest buyer to have a long and lasting business relationship.


Description: Scrap Stainless 309, 310, 316, inco 800, monel, Ti etc....
Origin: Any port of philippiens
Packing: Soft Press or Loose in 20 ft container.
Destination: Any port in asia pacific Region ( other port please inquire)
Payment Terms: 20 % advance deposit or irrevocable l/c at sight
Direct buyer preferred and agents also welcome.
Please include your required port of discharge, indicative price. Direct e-mail and
Company Profile

Used Electric Copper Transformers Scrap.
Whole Transformers.
Completely Drained Of Oil.
5KVA TO 150 KVA.
Stuffed Loose Into 40 Feet Containers.
2 Containers A Month To Start With.

Mixed Electric Motors Scrap Electric Motors and Alternators Scraps in Bulk Top Quality Mixed Electric Motor Scrap at Affordable Prices Buy electric motor scraps scrap electric motors Electric motor scrap
Mixed Electric Motors Scrap Electric Motors and Alternators Scraps in Bulk Top Quality Mixed Electric Motor Scrap at cheap price electric moto scrap for sale electric motor scrap

Dear buyers here are a list of our product which we supply

Electric Motor Scrap, AC fridge compressor scrap, Alternator Scrap, Starters scrap with 100% copper wind. We collect locally from our small

We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.

Our Company is a prestigious company with a good reputation to suite all customer`s across the world and we look forward to providing good quality products and we will offer at very good price as our prices are 100% NEGOTIABLE.

Operating conditions:
Ambient temperature: -15C Altitude: altitude should be lower than 1000 meters above sea level
Rated voltage: 380V
Rated frequency: 50/60HZ
Duty/Rating: Continuous(S1)
Insulation class: B
Protection class: IP54
Cooling method: IC0141.

Fridge/AC Compressor Scraps
We sell Fridge/AC Compressor Scraps at a very competitive market price.
Please let us know if you have a target price.

Please kindly find some specification below.
1) Quantity: between 1,500 MT up to 3,600 MT per month.

2) Packing: As buyer requires (20ft container is up to 3000 pcs to 3450 pcs of compressors in the container. 25 MT or 26 MT)

3) Delivery: Immediately and prompt.

Delivery Time: 7-21 days depending on delivery port..

Specifications
Drained Copper Compressor Fridges/AC (RAINS per ISRI Specifications).
Our copper content on 99.97 %
Monthly Supply Capacity: 500 - 1500 metric tons,
Type: Fridges, AC.
Packaging Detail: Wood Pallets, 20(40) FCL/ According to ISRI Specification in Containers
Quantity: Between 200~500MT per month
Minimum Order acceptable 1x20FCL (25MT or 26MT/20FCL, 3000 or 3450 Pieces/20FCL

Aluminium alloy 6063

6063 aluminium alloy

Aluminum wire scrap

Aluminum scrap UBC(Used Beverage Cans)

Aluminum wheel scrap

Aluminum tense and tabor
Aluminum content 75%, 95%,99%,99.7%

Aluminum wire scrap Composition:



Description clean old alloy aluminum sheet and sheet utensil scrap of two or more
Al content: >98%

We are global bulk suppliers of Premium Aluminum Wheel Scrap, ideal for recycling and reuse in various industries. Our aluminum wheel scraps are derived from used aluminum wheels and carefully sorted to ensure a high-quality product.

Key Features:

- High Aluminum Content: Minimum 95% aluminum content
- 6061/6063 Alloy: Suitable for a wide range of applications, including aerospace, automotive, and industrial manufacturing
- Clean and Sorted: Free from contaminants, such as steel, iron, and other non-aluminum materials
- Competitive Pricing: We offer competitive pricing

Applications:

- Aerospace: Ideal for producing aircraft and spacecraft components
- Automotive: Suitable for manufacturing automotive parts, such as engine blocks, cylinder heads, and gearboxes
- Industrial Manufacturing: Used in the production of industrial equipment, such as machinery and tools

Specifications:

- Material: Aluminum Wheel Scrap (6061/6063 Alloy)
- Aluminum Content: Minimum 95%
- Weight: 10-20 kg (22-44 lbs) per piece
- Dimensions: Varies
- Packaging: Wrapped in plastic or paper, strapped with steel bands

If you're interested in purchasing High quality Aluminum Wheel Scrap, please don't hesitate to contact us to provide you with a customized quotation and answer to any questions you may have.

Aluminum UBC Scrap

1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminum is produced in the production of industrial waste. Such as: Scrap Aluminum Wire, Scrap
Aluminum block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferrous, electronic waste etc.

Supply and exportation of metals and metal scraps of all types. Considering the fact this enterprise is new and its goal to satisfy all customers to the full, we have gained authorization to export this product all over the world.

Our company PDY Metal Recycling, is a Philippine based ferrous and non ferrous scrap supplier. We are direct from collecting, marketing, packing and trucking.
We are looking for a serious and honest buyer to have a long and lasting business relationship.



Description: Scrap Stainless Sabot.
Origin: Any port of philippiens
Packing: Jumbo Bags or Loose in 20 ft container.
Destination: Any port in asia pacific Region ( other port please inquire)
Payment Terms: 20 % advance deposit or irrevocable l/c at sight
Direct buyer preferred and agents also welcome.
Please include your required port of discharge, indicative price. Direct e-mail