A Pockels cell alters the polarization state of light passing through it when an applied voltage induces birefringence changes in an electro-optic crystal such as DKDP (KD*P) and BBO. When used in conjunction with polarizers, these cells can function as optical switches, or laser Q-switches. Frequently, Q-switches are employed in laser cavities for the purpose of shortening the output pulse, resulting in a light beam with enhanced peak intensity. In order to provide the device best suited to your purpose, we offer the DKDP (KD*P) series and LiNbO3 series Pockels cell.
You can operate the cell with either a pull-up voltage or a pulldown voltage. Changing the polarity will only change the direction of the phase rotation. In other words, the pull-down voltage Q-switch use ª-/4-voltage pulses on the Pockels cell and the pull-up voltage Q-switch use ª-/2-voltage pulses on the Pockels cell. You should not, however, operate the cell with a constant applied voltage potential between the terminals, or a duty cycle greater than ~ 2%.
Applications:
OEM laser systems
Medical/cosmetic lasers
Versatile R&D laser platforms
Military & aerospace laser systems
Product Feature:
1). Industry-proven performance;
2). Dry;
3). Highest (99.8% KD*P) deuteration levels in industry;
4). Adhesive/Epoxy-free assembly;
5). Apertures from 8mm diameter up to 20mm diameter;
6). Lowest absorption in industry;
7). High-reliability;
8). Economical upgrade/rebuild program;
9). Highest optical damage thresholds;
10). Accessible technical support;
11). Standard performance documentation;
12). One-year limited warranty.
13). Operation up to 1kHz.
Specification/Models:
D-EO-Q-25.4-39-X-C
Outline Dimension: ª¦25.4x39mm
Aperture: ª¦10mm
Single pass optical transmission:>98%
Voltage (V ª-/4) @1064nm: 3.2KV
Extinction Ratio: >1000:1
Single Pass Insertion Loss:<2%
ICR: >2000:1
VCR: >1500:1
Transmitted Wave Front Distortion: ª- /10
Capacitance: 3pF
Spectral Range of Operation:240-1400nm
Damage Threshold: >1GW/cm2
Fujikura fsm-60s fusion splicer is a updation of fujikura fsm-50s fusion splicer, 60s machine sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30" drop test.
The fsm-60s splices a optical fibre in 9 seconds and heats a 60mm splice sleeve (heat shrinkable tube)in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fibre holder system), automated monitor tuolima image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on.
Description:
Fujikura fusion splicer, 4.1" color screen, standard accessories, including cleaver ct-30a. Multiple foreign languages menu is optional.
Features:
>>> core to core fiber alignment system pas environment (rain, dust, shock) resistant features
>>> world's most compact and lightest of its class
>>> arc calibration-free system
>>> 4.1" tft color lcd monitor
>>> dual-directional operating system
>>> long life battery
>>> fiber holder option
>>> detachable work plate (attached to carrying case)
Modelú¦ electron eyepiece-a006
Detailed parametersú¦
Resolution: 1280(h)*1024(v) (1.30mp), or 2048(h)*1536(v)(3.00mp);
Chip: 1/2" micron mt9m001;
Magnification of optical system: 0.45x;
Capturing micro-images and showing live video on pc screen;
Saving still images as bmp, jpg files;
Software for previewing, measuring, comparing, counting, saving and deleting;
Tube mounts: ª¦23.2, ª¦30, ª¦30.5mmú+
Pc system required:
Hardware: usb2.0 socket; cpu: intel p4; ems memory: 256m; hard plate: 512m;
Software: win2000( with mend sp4); or winxp (with mend sp3); vista; directx 9.0
Model lgx-2006b
Detailed parameters
45mm din achromatic objective10x 100x (s, oil)
Metallurgical plan-scope achromatic objective40x
Wide field plane-scope eyepiecewf10xú¼wf12.5x
Wide field plane-scope eyepiece with 0.1mm cross micrometerwf10x micro-ruler0.01mm/scale
Total magnification100x-1250x
Articulated free binocular headú¼interpupillary distance55-75mm 45 inclined double layers mechanical stageú¿200x180mm with two plates 10 and 20mm
Moving range x-y70x50mm
Coaxial coarse and fine focusing adjustable mechanism by rack and pinion with tension adjustment and stage height limited knobú+
Focusing range25mmú+
Precision0.002mm
Built-in adjustable brightness halogen lamp 6v/20w and kohlar illumination system with blueú¼greenú¼yellow and ground glass filters
Net weight/set 8kg
Package1 set/carton 42x35x52cmú+
Gross weight/carton 10.5kg.
Operating microscope with 3 & 5 step magnification
Operating microscope, available for ophthalmology, ent procedures, dental procedures, neuro surgeries, plastic & general surgeries. 45degree inclined binocular tubes for ophthalmic, dental, neuro & plastic surgery
90degree straight binocular tube for ent surgery
Available with 3 step magnification i.E. 7.5x, 12.5x & 20x
Field of view: 37.8mm, 23.5mm, 14.5mm
And 5 step magnification i.E. 5x, 7.5x, 12.5x, 20x, 30x
Field of view: 59 mm, 37.8mm, 23.5mm, 14.5mm, 9.5mm
Eye pieces:12.5x extra wide field / 16mm dioptric adjustment
Objective lens:f=200
Working distance:200mm
Interpupillary distance adjustment:55mm to 75mm
Motorized foot focusing system
Illumination section:
Light source:15v/150w halogen lamp
Illumination control:continuous adjustment
Field of illumination:70mm
Filter: cobalt blue, red-free, heat absorbing filter
General information
Base size:600mm x 550mm
Weight:50kg approx.
Height:1550mm
Electrical power:ac 220/110v
Optional accessories:
1. Beam splitter with c' mount
2. Monocular assistscope
3. Ccd camera
4. Objective lens 300mm or 400mm.
A water-cooled acousto-optic Q-Switch for use in high-power Nd:YAG laser systems. Combining top grade fused silica with high quality optical finishing and in-house anti-reflection coatings, this Q-Switch exhibits very low insertion loss and high damage threshold. Through an innovative design and manufacturing process, RF powers up to 100W may be applied.
Standard options include a choice of frequencies (24 to 68MHz), active apertures (1 to 8mm), acoustic modes (compressional for linear polarisation, shear for unpolarised) and water connectors. Customised housings are available for OEMÆs.
A high power RF driver module is available in output powers of 50W, 75W or 100W. Powered from 220VAC or 110VAC, the modulation inputs allow either full digital control or activation of an internal pulse generator. First pulse suppression is automatically implemented.
Profile projectors have become an indispensable need of automobile, engineering goods, electrical, plastic & rubber industry because of the increasing demand for critical measurements with precision, accuracy & repeatability. Apart from the basic function of a profile projector, which is to project the magnified image of the component with the help of optics, sipconÆs profile projector comes with various options of D.R.O.S & software to measure geometrical dimensions (like roundness, parallelism etc.) & to perform all kind of reverse engineering operations, thanks to its compatibility with a large number of drawing & modeling softwares.
Coordinate measuring machine versatile, portable & low cost CMM for engineering institutes from SIPCON provides all the functionalities with a user friendly software from Metronics, USA is available in both manual & CNC system.
Profile projectors have become an indispensable need of automobile, engineering goods, electrical, plastic & rubber industry because of the increasing demand for critical measurements with precision, accuracy & repeatability. Apart from the basic function of a Profile Projector, which is to project the magnified image of the component with the help of optics, SIPCONÆs Profile Projector comes with various options of D.R.O.S & software to measure geometrical dimensions (like Roundness, Parallelism etc.) & to perform all kind of reverse engineering operations, thanks to its compatibility with a large number of drawing & modeling software.
For engineering institutes from SIPCON, provides all the functionalities with a user friendly software from Metronics, USA and is available in both manual & CNC system.
613 Optical Machinery Equipment Suppliers
Short on time? Let Optical Machinery Equipment sellers contact you.
