1. Screens with high open area are more suitable for the construction of high-quality water wells, oil wells and gas wells.
2. Low cost operation screens with high open area shall favor groundwater infiltration. Abundant water shall reduce the water level¡¯s down, thus to save energy consumption.
3. Reduce the abrasion of the pump
Under the same condition, high open area can make the speed of groundwaters entering into the screen much slower than any other filtration apparatus, which will avoid sand¡¯s entering into screen because of high pressure, thus reduce the abrasion of the pump.
4. Extend the life span of wells
Comparatively, groundwater¡¯s entering into screen with higher open area is much easier than the entering into lower open area screen. The slow water flow shall extend the life span of wells.
Slotted pipe
Api od:60.32-508mm
Thickness:4.24-16.13mm
Length:5-10m
Material: api j55, api k55, n80, p110
This machine is special for recovering and purifying various kind of high-precision lubricating oil such as hydraulic oil, mechanical oil, coolant oil, fear oil, heat treatment oil and so on.
Features
1. Strong capability of breaking emulsification
2. The combination of coalescing separation and vacuum dewatering
3. More deeply and precisely fh rectangular filtering system
4. Zn unique technology---H.P.M high polymeric absorbing material.
This machine is designed for treating unqualified turbine oil, especially the seriously emulsified turbine oil. It can remove water, gas and impurities rapidly and effectively and make the oil regenerated.
Features:
1. Fully breaking emulsification by means of polymeric material
2. High-effectively dewatering with once and for two steps dehydrator method, ty series can thoroughly remove the liquid water, free water and 80% of dissolved water
3.With zn q distinctive removing impurities technique filtering through double fh trapezoidal network and absorbing by polymeric material, this machine can make the surpass or equal to 200 and make the cleanness not cleanness not surpass grade 6 (nas 1638)
4. With the trapezoidal, spiral, automatic back flushing system
5. With the advanced dielectric condensation devices
6. On-line oil purification can be carried out with turbine or water turbine automatically
Advantages:
After demulsification by this machine, the treated oil is hard to be emulsified again. Its dehydration volume is large and it can drain off the water on line. Ty series, which prevent lubrication system from damage, can effectively extend the lifetime of oil and protect turbine and other machines.
This machine is designed for treating wide range of unqualified insulating oil, including aging transformer oil, mutual inductor oil, switch oil ect.
Features:
1.Bi-infrared liquid duplex 3d stereo-evaporation technology, dewatering and degassing effectively
2.Distinctive removing the impurity technology of filtering through double fh trapezoidal network and absorbing by high polymer without the mechanical power
3.Bi-infrared liquid level automatic controller system
4.Trinity inter locked preventive device
5.Either for vacuum oiling machine or vacuum drying machine
6.Automatically testing oil dielectric strength and printing out the result
Advantages:
This machine is a new-type of high-effective vacuum oil purifier with the duplex 3d stereo-evaporation technology and g technology. Adopting the technology which removes the impurities by using double fh trapezoidal network and high polymer absorbing without any mechanical power. It has 5-8 times effective than common vacuum oil purifiers. Low consumption of energy and less wearing materials are needed.
Wooden
1802 Oil Field Machinery Equipments Suppliers
Short on time? Let Oil Field Machinery Equipments sellers contact you.
This machine is particularly used in such industry as mines, metallurgy, electric power, transportation, mechanical manufacture in which lubrication oil like hydraulic oil, engine oil, car/motor oil, cooling oil etc are used. Gas engine oil used in the field of transportation like shipping, land-carriage etc. also can be treated with regeneration by LYE series machines.
Product description:
LYE series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.
Features:
1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil.
2. Completely removing water and harmful gas from the waste oil.
3. Recovering the color of the treated oil as fresh oil.
4. Simple operation, safe and reliable.
5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements.
6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating AC contract and prolong the service life of AC contract.
7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vacuum level, ultra-pressure etc.
Model yz/xz32-2 screw oil press is the biggest national continuous pre-press and one-tme pressing equipment and suitable for the oil plant to process the seeds containing more oil such as peanut kernels, cottonseed kernels, safflower seed and sunflower kernels. Such equipment has the following advantage: high processing ability; low power consumption; low operation expense, defatted cake being loose but not crushed, is helpful to sovent penetration; low esidual oil rate. The press is the ideal oil press equipment both for large size and middle size oil plant.
15) package: wooden case, 1000pcs each case.
16) usage: oil exploration equipment, accessories, oil sucker rod coupling
We are the manufacturer of sucker rod couplings and can supply the high quality sucker rod couplings in low price with the hope to establish a long-term relationship with you.
If any of the sucker rod couplings interests you, please contact me for more information about the sucker rod couplings.
Rzl lubricating oil vacuum purifier series:
Used for breathe into new oil and rebirth handle of unqualified high accuracy lubricating oil such as hydraulic oil, lubricating oil, refrigerating oil, anti-rub hydraulic oil.
Handled lubricating oil which come to be with low emulsify value, with low water content and high accuracy purified could be used again and again for domestic and international high accuracy lubrication equipment completely.Feature1super ability for demulsifying.
2accumulate separate combine to dehydrate in vacuum.
3deep level of structure, high accuracy fh trapezia filters system, long-time use, with low cost and high efficiency.
4jinrun technique of hpm high polymer adsorbing material.
5electrical interlock control, with high automatization.
Used for 35kv and above power transmission and distribution equipment and national main distribution net.
Dehydrates, removes gas and impurity substance thoroughly at high speed. Handled oilf+s limit withstand voltage is increased, and meets the oil standards fast. Not only for purifying oil, but also for working as the independent vacuum device, and vacuum treating for power insulating equipment.
Feature
1. High degree of vacuum, limit vacuum f_5pa, operating degree of vacuum f35pa, high suction speed, pump speed fª333l/s.
2. Reply type stereoscopic flash steam, fast dehydrate liquid water a great deal. Adopts the uk technique, effectively remove moisture such as dissolve water etc..
3. Uses removing impurity technique of double net type filters combine to high polymer filter elements, and efficiently remove the impurity substance. The filter elements are cleanable, and can be used for long time, then cut down the cost.
4. Special electrical power heating system get rid of ethyne from oil completely.
5. Be specially suitable for vacuum filling and drying for high grade transport and transform electric equipments.
6. Electrical interlock control, with high automatization, be available for safely and reliably online operation.
Uses:
Used for breathing into new oil and handling unqualified turbine oil, especially for the emulsified turbine oil as mixing with the water and air because of seal problem, and for dehydrating, removing impurity substances, demulsifying for lubricating oil.
Destroys emulsify oil thoroughly, not easy to emulsify again. Not only dehydrates a great deal but also drains off water without stopping machine. Improves oil quality from all direction.
Feature:
1. Adopts high polymer material destroy emulsify thoroughly.
2. Adopts the two elements once way of dehydrating, dehydrating efficiently, removes not only liquid water thoroughly, but also 100% free water and 80% dissolve waters.
3. Uses Jinrun technique of double net type filters combine to high polymer absorbing material, the cleanness of treated oil can met 6 class ( NAS1638) or lower .
4. Handled oil meets the standards of The Pollution Control Standards For Steam Turbine Oil in Operation.
5. Light weight, safety, and reliability. Operates automatically and stably with steam turbine machine or water turbine machine etc.. Remote operation is available.
6. Available for adopting PLC automatic operating system, operates by touching screen with dynamic display. It can be connected to computer, and realize intelligent operation.
Application:
Mainly used for electric power, metallurgy, coal mine, etc., and electrification vacuum oil-replenishment for on-working oil-filling device, and vacuum oil-filling or replenishment for after-examination and repair oil-filling device, and especially for filling or replenishing oil for under 220kv oil-immersed transformer and metal expander, as well as providing vacuum for electric power equipment and non oil-fill device.
Feature:
Djl filling machine series accumulates dehydration, removal of impurity and air-drying. Delicate filtering system without oil pump attached, decreased working noisy, and enhanced the controllable function. With small size, the machine is easy to be operated, and flexible for being moved.
On process of oil-filling, insulating oil keeps untouched with air. High accuracy purifying particulate substance ensures high efficient oil-filling.
Application:
Mainly used for electric power, metallurgy, coal mine, etc., and electrification vacuum oil-replenishment for on-working oil-filling device, and vacuum oil-filling or replenishment for after-examination and repair oil-filling device, and especially for filling or replenishing oil for under 220kv oil-immersed transformer and metal expander, as well as providing vacuum for electric power equipment and non oil-fill device.
Feature:
Djl filling machine series accumulates dehydration, removal of impurity and air-drying. Delicate filtering system without oil pump attached, decreased working noisy, and enhanced the controllable function. With small size, the machine is easy to be operated, and flexible for being moved.
On process of oil-filling, insulating oil keeps untouched with air. High accuracy purifying particulate substance ensures high efficient oil-filling.
The advantages of TRZJ series oilfiled drilling fluid mud cleaner
1. Oilfiled drilling fluid mud cleaner has used Solidworks 3D software in its design to make its configuration compact and less space.
2. Desander and Desilter there is a control valve which can always adjust the amount of work of Desander and Desilter and it is simple operation and easy maintenance.
3. Desilter and Desander equipped an automatic sand-blocking devices and bottom orifice adjustment device.
For fueling diesel, Kerosene, not for gasoline
Mechanical seal that guarantees constant reliability, even in low temperatures.
Cast-iron pump casing, treated against corrosion and paint-finished.
Vane pump with steel rotor
Bypass valve built in.
In-built 100-micron filter, easily accessible for cleaning.
Induction motor with aluminium casing. Grade of protection: IP54.
Continuous running.
ZYB-50 Vane Pump, built in air separator, by pass valve, filter, is with three different top covers for different connecting pipes. A type. B type and C type.
With the advantage of low noise, high flow rate, long life service, etc.
EXYTB-60 is designed according to vane pump's feature, with mechanical seal and explosion proof single-phase asynchronous motor for oil dispensers that guarantees constant reliability, even in low temperature. Cast-iron pump casing, treated against corrosion and paint-finished. In-built 100micron filter, easy to clean. Continuous running.1" Threaded joints on pump casing. Bypass valve built into pump casing. It's easy to operate, being widely used in motorcade, factory, house using for diesel, kerosene and gasoline. It is made in stainless steel, with stainless nozzle and corrosion resistant hose . It also can extract chemical liquids.
Technical performance
Medium
Gasoline,Diesel oil, Coal oil etc.
