Find Verified Oil Field Machinery Equipments Suppliers, Manufacturers and Wholesalers

Our commitment to blending / packing of Lubricants and Greases as per ISO Standards. All our products are blended at ISO certified plants, at whichever location the products may be blended.

-----------------------------------------
PRODUCT RANGE

1- PETROL ENGINE OILS
2- TRACTOR FLUIDS
3- TRANSMISSION FLUIDS
4- MARINE ENGINE OILS
5- INDUSTRIAL FLUIDS
6- DIESEL ENGINE OILS
7- COOLANT & ANTI FREEZE
8- BRAKE FLUIDS
-----------------------------------------
Packaging

- CTN 12X1 L
- CTN 4X4L
- CTN 4X5L
- Pali 20L
- Drum 208L
- ISO Tanks Or Flexi Tanks
-----------------------------------------
Private Labeling Available
-----------------------------------------
Manufactured at ISO certified plants
Meet & exceed various API certifications
OEM approvals
-----------------------------------------
Please don't hesitate to contact us.

Overview
Products Description
The Composite Bridge Plug is made from composite material and easy to drill out. It is mainly composed of mandrel, rubber, slips, cones, protection bowls, release/start pins, lower sub and so on. The composite bridge plug is mainly used for provisional plugging in oil and gas well, and fracturing construction
Working principle
The opposite power produced by setting tool (wire line or transmitting hydraulic pressure in oil tube) acts on the lower sub, shears the starting dowels and exerts compressive force on rubber through cone. Inside the tension range slips dehisce and inlay the in wall of the casing, rubber expand to the in wall of the casing and seal up it, finish setting. When the tension rises to the shear rating, the starting dowels be sheared and the setting tool separates from the bridge plug, finish releasing. After taking out the setting tool, the frac ball that be put into the well will work hermetically with the head face of the mandrel. The plug can be quickly drilled out under the necessity of the after steps
Drilling out
Recommend the use of special milling tools. Recommend rotation rate: 60~150rpm, bit weight: 5~15kN, viscosity of drilling plug fluid:15~30mPas and minimum cyclic velocity: 36.6m/min, to make sure the debris circulates out. After the preparation is done, start the screw drill and drill slowly into the bridge plug. Ensure continuous drilling speed by applying drilling pressure. The torque added to the drilling tool should not be greater than the recommended value. Excessive drilling pressure increases the friction resistance of the pipe string and results in large pieces of debris which must be salvaged separately.
Specification
Type
DTJ92
DTJ100
DTJ112
DTJ145
Suitable casing size
9.5-13.5lb/fï¼?99.56mm-103.88mmï¼?
13-18 lb/fï¼?108.62mm-114.14mmï¼?
17-23lb/ft 118.62mm-124.26mm
26-32lb/ft 154.78mm-159.42mm
Max OD
3.62" 92mm
3.93 (100mm)
4.4" 112mm
5.68" 144mm
Min ID
1.1" 28mm
1.8 (30mm)
1.5 38mm
1.14" 45mm
Total length
26" 660mm
26" 660mm
26" 660mm
39.4" 1000mm
Working pressure
10000psi 70MPa
10000psi 70MPa
10000psi 70MPa
10000psi ï¼?70MPa
Working temperature
300 150
300 150
300 150
300 150
Seating load
120-130kN
160-180kN
160-180kN
160-180kN

We supply RE-CONDITIONED ALFA LAVAL CENTRIFUGES, Mitsubishi and Westfalia oil purifier, industrial centrifuge, oil separators.



We have the following separators in our ready stock:

OIL SEPARATORS ALFA-LAVAL MAB-103
OIL SEPARATORS ALFA-LAVAL MAB-104
OIL SEPARATORS ALFA-LAVAL MAB-204
OIL SEPARATORS ALFA-LAVAL MAB-205
OIL SEPARATORS ALFA-LAVAL MAB 206

OIL SEPARATORS ALFA-LAVAL MAPX 204
OIL SEPARATORS ALFA-LAVAL MAPX 205
OIL SEPARATORS ALFA-LAVAL MAPX 309
OIL SEPARATORS ALFA-LAVAL MAPX 207


OIL SEPARATORS ALFA-LAVAL MOPX 309
OIL SEPARATORS ALFA-LAVAL MOPX 310
OIL SEPARATORS ALFA-LAVAL MOPX 207
OIL SEPARATORS ALFA LAVAL MOPX 205
OIL SEPARATORS ALFA LAVAL MOPX 207

OIL SEPARATORS ALFA-LAVAL WHPX 407
OIL SEPARATORS ALFA-LAVAL WHPX 410
OIL SEPARATORS ALFA-LAVAL WHPX 505
OIL SEPARATORS ALFA-LAVAL WHPX 513
OIL SEPARATORS ALFA-LAVAL WHPX 510

OIL SEPARATORS ALFA LAVAL FOPX 605
OIL SEPARATORS ALFA LAVAL FOPX 613
OIL SEPARATORS ALFA-LAVAL FOPX 610

OIL SEPARATORS MITSUBISHI SJ 700
OIL SEPARATORS MITSUBISHI SJ 3000
OIL SEPARATORS MITSUBISHI SJ 4000
OIL SEPARATORS MITSUBISHI SJ 10T
OIL SEPARATORS MITSUBISHI SJ 20T
OIL SEPARATORS MITSUBISHI SJ 30EH
OIL SEPARATORS MITSUBISHI SJ 40EH
OIL SEPARATORS MITSUBISHI SJ 30F
OIL SEPARATORS MITSUBISHI SJ 50F
OIL SEPARATORS MITSUBISHI SJ 2000
OIL SEPARATORS MITSUBISHI SJ 11 T
OIL SEPARATORS MITSUBISHI SJ 15 T
OIL SEPARATORS MITSUBISHI SJ 16 T
OIL SEPARATORS MITSUBISHI SJ 25 T
OIL SEPARATORS MITSUBISHI SJ 25 EH
OIL SEPARATORS MITSUBISHI SJ 60 EH

OIL SEPARATORS WESTFALIA OSA7-02-066
OIL SEPARATORS WESTFALIA OSA20-02-066
OIL SEPARATORS WESTFALIA OSC4-02-066
OIL SEPARATORS WESTFALIA OSA20-0136-066
OIL SEPARATORS WESTFALIA OSA 35
OIL SEPARATORS WESTFALIA OSB 35

it is intrinsically safe Atex approved used to fill lpg cylinder



1000 * 1000 * 1000 mm
110 Kg

Oil & gas equipments.