Find Verified Lubricants Suppliers, Manufacturers and Wholesalers

Product Introduction:
Lauric Acid is used in many applications, including: anionic and nonionic surfactants, and raw material for emulsifiers. Used in the rubber industry as an activator/accelerator/ plasticizer and softener.
Widely used in pharmaceuticals, surfactants, soaps, detergents, cosmetics, daily chemicals.

Product Functions&Applications:

1. Lauric Acid mainly used in the production of alkyd resin, wetting agent, detergent, pesticides, surfactants, food additives and cosmetics raw materials.
2. Lauric Acid used as a surface treatment agent for the preparation of adhesive. It is also used in the manufacture of alkyd resin, chemical fiber oil, pesticides, synthetic spices, plastic stabilizer, gasoline and lubricating oil.
3. Lauric Acid is the raw material for producing soap, detergent, cosmetics, surfactants and chemical fiber oil.

Champion Blue Flame Synthetic Blend series engine oils are designed to provide industry-leading performance to meet the needs of the next generation of heavy duty engines. Increased power density, reduced oil volume and extended drain intervals place unique demands on engine oils to control oxidation by-products, sludge and deposits. Due to higher shear stress and lower viscosity minimums for engine oils, only oils with the highest wear protection and viscosity stability can maximize the performance and life of advanced diesel engines.

Oxidation Control- Champion Blue Flame Synthetic Blend series engine oils take oxidation resistance to another level, allowing users to achieve longer drain intervals, reduce maintenance and downtime, and extend engine life. Controlling oxidation, corrosive acids, sludge and varnish precursors allows for extended drains and minimized wear even under the most extreme conditions. Synthetic base oils provide reduced volatility and oil consumption, further reducing the build-up of sludge and varnish. Oxidation lower than OEM limits in over 60,000 mile on-highway and 600 hour off-highway drain intervals.â?¢ Proprietary additives and synthetic base oils have shown up to 80% reduction in Volvo T-13 oxidation.

Wear Control- Champion Blue Flame Synthetic Blend series engine oils keep your engines going longer by reducing engine wear, preventing high temperature corrosion and controlling abrasive soot contamination, even while allowing for improved fuel economy and lower total cost of ownership. Synthetic base oils improve cold-flow properties and reduce start-up wear, leading to extended engine life and performance. Over 75% less pushrod wear, 85% less injector screw wear and 70% better resistance to filter-plugging than CJ-4 oils in proprietary, extra-severe engine testing. Outperformed corrosion bench testing limits by 70% for copper and over 98% for lead and tin.â?¢ Cold-pumping viscosity 72% lower (SAE 15W-40) and 69% lower (SAE 10W-30) than J300 limits, providing excellent lubrication and wear protection at start


Part# 4358N/4 4/1 Gal.
Part# 4358U/2 2/2.5 Gal.
Part# 4358AN 55 Gal.

At Mirielle, we are dedicated to providing high-quality oil products to meet the diverse needs of our customers. We offer a comprehensive range of engine oil, hydraulic oil, grease, and gearbox oil grades to ensure that our customers find the right product for their needs.

Our engine oil grades include SAE 0W, SAE 5W, SAE 10W, SAE 15W, SAE 20W, SAE 25W, SAE 30, SAE 40, SAE 50, and SAE 60. Our hydraulic oil grades include ISO 22, ISO 32, ISO 46, and ISO 68. Our grease grades include NLGI 0, NLGI 1, NLGI 2, and NLGI 3. Our gearbox oil grades include SAE 75W-90, SAE 80W-90, SAE 85W-140, and SAE 90.

We offer a variety of packaging options, including 55-gallon drums, 275-gallon totes, and bulk tanker delivery. Our team is committed to providing tailored solutions to meet your specific requirements.

We offer flexible shipment options to our customers including Partial Load Containers and Full Load Containers. Our pricing is dependent on various factors including grade and type of oil, packaging options and quantity ordered, shipping terms (FOB, CIF, DAP), geographic location of the buyer, current market conditions, and availability. Therefore, we invite you to contact our sales representative to get a special offer that is prepared regarding your specific needs.

Our Incoterms options include FOB, CIF, and DAP, while our payment terms are L/C. We take pride in our ability to provide high-quality oil products and exceptional customer service to our clients. Please feel free to contact us for more information about our products or to place an order.

At Mirielle, we are dedicated to providing high-quality oil products to meet the diverse needs of our customers. We offer a comprehensive range of engine oil, hydraulic oil, grease, and gearbox oil grades to ensure that our customers find the right product for their needs.

Our engine oil grades include SAE 0W, SAE 5W, SAE 10W, SAE 15W, SAE 20W, SAE 25W, SAE 30, SAE 40, SAE 50, and SAE 60. Our hydraulic oil grades include ISO 22, ISO 32, ISO 46, and ISO 68. Our grease grades include NLGI 0, NLGI 1, NLGI 2, and NLGI 3. Our gearbox oil grades include SAE 75W-90, SAE 80W-90, SAE 85W-140, and SAE 90.

We offer a variety of packaging options, including 55-gallon drums, 275-gallon totes, and bulk tanker delivery. Our team is committed to providing tailored solutions to meet your specific requirements.

We offer flexible shipment options to our customers including Partial Load Containers and Full Load Containers. Our pricing is dependent on various factors including grade and type of oil, packaging options and quantity ordered, shipping terms (FOB, CIF, DAP), geographic location of the buyer, current market conditions, and availability. Therefore, we invite you to contact our sales representative to get a special offer that is prepared regarding your specific needs.

Our Incoterms options include FOB, CIF, and DAP, while our payment terms are L/C. We take pride in our ability to provide high-quality oil products and exceptional customer service to our clients. Please feel free to contact us for more information about our products or to place an order.

At Mirielle, we are dedicated to providing high-quality oil products to meet the diverse needs of our customers. We offer a comprehensive range of engine oil, hydraulic oil, grease, and gearbox oil grades to ensure that our customers find the right product for their needs.

Our engine oil grades include SAE 0W, SAE 5W, SAE 10W, SAE 15W, SAE 20W, SAE 25W, SAE 30, SAE 40, SAE 50, and SAE 60. Our hydraulic oil grades include ISO 22, ISO 32, ISO 46, and ISO 68. Our grease grades include NLGI 0, NLGI 1, NLGI 2, and NLGI 3. Our gearbox oil grades include SAE 75W-90, SAE 80W-90, SAE 85W-140, and SAE 90.

We offer a variety of packaging options, including 55-gallon drums, 275-gallon totes, and bulk tanker delivery. Our team is committed to providing tailored solutions to meet your specific requirements.

We offer flexible shipment options to our customers including Partial Load Containers and Full Load Containers. Our pricing is dependent on various factors including grade and type of oil, packaging options and quantity ordered, shipping terms (FOB, CIF, DAP), geographic location of the buyer, current market conditions, and availability. Therefore, we invite you to contact our sales representative to get a special offer that is prepared regarding your specific needs.

Our Incoterms options include FOB, CIF, and DAP, while our payment terms are L/C. We take pride in our ability to provide high-quality oil products and exceptional customer service to our clients. Please feel free to contact us for more information about our products or to place an order.

At Mirielle, we are dedicated to providing high-quality oil products to meet the diverse needs of our customers. We offer a comprehensive range of engine oil, hydraulic oil, grease, and gearbox oil grades to ensure that our customers find the right product for their needs.

Our engine oil grades include SAE 0W, SAE 5W, SAE 10W, SAE 15W, SAE 20W, SAE 25W, SAE 30, SAE 40, SAE 50, and SAE 60. Our hydraulic oil grades include ISO 22, ISO 32, ISO 46, and ISO 68. Our grease grades include NLGI 0, NLGI 1, NLGI 2, and NLGI 3. Our gearbox oil grades include SAE 75W-90, SAE 80W-90, SAE 85W-140, and SAE 90.

We offer a variety of packaging options, including 55-gallon drums, 275-gallon totes, and bulk tanker delivery. Our team is committed to providing tailored solutions to meet your specific requirements.

We offer flexible shipment options to our customers including Partial Load Containers and Full Load Containers. Our pricing is dependent on various factors including grade and type of oil, packaging options and quantity ordered, shipping terms (FOB, CIF, DAP), geographic location of the buyer, current market conditions, and availability. Therefore, we invite you to contact our sales representative to get a special offer that is prepared regarding your specific needs.

Our Incoterms options include FOB, CIF, and DAP, while our payment terms are L/C. We take pride in our ability to provide high-quality oil products and exceptional customer service to our clients. Please feel free to contact us for more information about our products or to place an order.

Champion Universal Automatic Transmission Fluid is a cost-effective solution for planetary automatic transmissions in passenger motor vehicles, power transmissions in some vocational equipment, certain power steering systems, and anti-wear hydraulic applications.

This fluid is blended with quality base oils, shear stable polymer, and carefully balanced chemistry providing friction modification, cleanliness, air release, seal compatibility and resistance to corrosion, oxidation, and wear.

Excellent cleanliness; resistance to sludge and varnish buildup
Anti-wear performance and friction modification
Exceptional performance at low temperatures
Friction modification for smooth clutch engagement
High viscosity index
Champion Universal Automatic Transmission Fluid meets the performance requirements of: Allison C-3 & C-4 / Allison TES-389B / American Motors ATF +3 (MS7176-E), ATF +4 (MS9602) / Audi 5 HP LT71141 (ZF 5 HP 18FL/19FL/24A) / Audi G 052 162-A1/A2 (ZF Lifeguard fluid 5) / BMW LA2634 / BMW LT71141 (ZF 5 HP 18FL/19FL/24A) / BMW ZF 5HP18FL, 5HP24, 5HP30 / BMW 7045E / BMW ETL-8072B / Bosch TE-ML 09 / CAT TO-2Chrysler ATF+, +2, +3 (MS 7176E), +4 (MS 9602) / Daewoo LT 71141 / Esso LT 71141 / Ford MERCON / Ford ESP-M2C166H, XL-12 / GM TASA / GM DEXRON-II / GM DEXRON -IID / GM DEXRON-IIE / GM DEXRON-IIIG / GM DEXRON -IIIH / Hyundai/Kia Dex-II/ SP-II / Jaguar ATF 3403 M115 / Jaguar ATF LT71141, ZF 5HP24 / Jaguar ATF 3403 JLM20238 / JEEP ATF+3, +4 / MAN 339A / Mazda ATF D-II / Mazda ATF M-III / Mazda ATF F-1 / MB ZF 4HP20 / NAG 1 (Chrysler, Jeep, Cherokee) / Opel (all vehicles) / Peugeot/Citroen Z 000169756 / Porsche ZF 5HP19FL, ZF 5HP20, LT71141 / Porsche ATF 3403-M115 / Porsche 000 043 205 09 / Porsche 999 917 547 00 (A2) / PSA / Renault DPO/AL4Renault Matic D2 / Shell 3403, M115, LA 2634 / Texaco 7045-E / Texaco 8072B / Toyota ATF D-II / Toyota ATF D-III Vickers M2950-S, I-286-S / Volvo 97325 / Volvo 97335 / Volvo CE 97340 / Volvo CE 97341 / VW G-052 025 A2 / VW G-052 162 / ZF all 3 & 4 speed transmission / ZF TE-ML 05L / ZF TE-ML 09 / ZF TE-ML 21

Part# 4355H/12 12/1 QT.
Part# 4355N/4 4/1 Gal.
Part# 4355U/2 2/2.5 Gal.
Part# 4355D 5 Gal.
Part# 4355AN 55 Gal.

Champion Power Transmission Fluids are specifically designed to protect powershift and hydrostatic transmissions in heavy duty equipment where a high friction fluid is necessary for proper clutch performance. High quality base oils and additives provide gear and clutch protection even in the most demanding conditions.

Champion Power Transmission Fluids oils meet Caterpillar TO-4 and earlier specifications and is also recommended for powershift transmissions in other vocational equipment from manufacturers such as Kubota, Komatsu, Hitachi and more.

Part# 4311D 5 Gal.
Part# 4311AN 55 Gal.

Champion Power Transmission Fluids are specifically designed to protect powershift and hydrostatic transmissions in heavy duty equipment where a high friction fluid is necessary for proper clutch performance. High quality base oils and additives provide gear and clutch protection even in the most demanding conditions.

Champion Power Transmission Fluids oils meet Caterpillar TO-4 and earlier specifications and is also recommended for powershift transmissions in other vocational equipment from manufacturers such as Kubota, Komatsu, Hitachi and more.

Part# 4345D 5 Gal.
Part# 4345AN 55 Gal.

Champion Power Transmission Fluids are specifically designed to protect powershift and hydrostatic transmissions in heavy duty equipment where a high friction fluid is necessary for proper clutch performance. High quality base oils and additives provide gear and clutch protection even in the most demanding conditions.

Champion Power Transmission Fluids oils meet Caterpillar TO-4 and earlier specifications and is also recommended for powershift transmissions in other vocational equipment from manufacturers such as Kubota, Komatsu, Hitachi and more.

Part# 4313D 5 Gal.
Part# 4313AN 55 Gal.

CHAMPION POLY 7 RED is our tacky, multi-purpose, high temperature grease that incorporates polymer technology, premium additive technology, hydro-treated base oils and a lithium complex thickening system. Additive and polymer technologies ensure maximum lubricity and adhesion, resistance to water wash-out, and resistance to sling-off. Tackiness additives keep this grease in place under high pitch line speeds, and provide ease of application.

CHAMPION POLY 7 RED's premium combination of additives provide for excellent resistance to oxidation, rust and corrosion. Extreme-pressure chemistry and polymer technology work together to ensure reduced wear, especially under extreme shock loads, and protects against scuffing, spalling, fretting, and pitting of bearings, gears, and bushings. High base oil viscosity index improves pumpability while offering higher protection at high operating temperatures, while lithium complex thickening provides for high run-out resistance at very high operating temperatures.

Part# 4053T 10/14 oz.
Part# 4053D 35 lb.
Part# 4053C 120 lb.

We are supplier and exporter of Hydraulic Oil.

Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.

Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.

CHAMPION SUPER GRADE TORQUE FLUID is our premium power transmission and final drive fluid specifically designed to meet the requirements of heavy duty equipment powershift transmissions, final drive components, and hydraulic systems. This fluid uses premium hydrocracked base oils and shear-stable viscosity modifiers to provide excellent cold flow properties and film strength at high temperatures. The frictional performance of this fluid is specifically designed for optimum operation and protection of final drive components and provides the best friction for clutches, gears, and friction materials. Super Grade Torque Fluid meets the performance requirements of Caterpillar TO-4M, Caterpillar TMS, Komatsu, Allison C-4, API CF & CF-2.

Benefits and Features:
All-season fluid for excellent cold-start flow and high temperature protection
Provides anti-wear and extreme-pressure protection
Good shear-stability for stay-in-grade performance
Protects seals
Protects against oxidation
Reduces gear wear and provides excellent friction control
Excellent foam control
Provides crankcase protection if oil is misapplied

Part# 4287U 2/2.5 Gal.
Part# 4287AN 55 Gal.

Champion 4000 ULTRA is our high-efficiency, all-weather synthetic transmission/hydraulic fluid designed for tractors, diggers, excavators and vocational equipment. Our synthetic hydrocarbon base oils and exceptionally shear-stable technology results in a fluid with optimal fluid life, cold flow, and viscosity control. Compounded with premium additives, 4000 ULTRA provides excellent anti-wear, extreme-pressure, friction control, cleanliness, anti-oxidant, anti-corrosion, and air release properties.

Excellent cold-flow reduces start-up wear
Shear stability and viscosity control reduce internal pump leakage
Dispersants and anti-oxidants clean and control sludge and varnish
Friction modifiers provide excellent resistance to noise, chatter, and slippage
Extreme-pressure additive protects against scuffing and spalling of gears
Seal conditioners prevent sloughing, blistering, cracking and hardening of gaskets
Synthetic hydrocarbon base oil resists thermal and oxidative breakdown and releases water
better than conventional base oils.
Retains a better high temperature film strength than competing monograde and HV-type fluids.

Champion 4000 ULTRA reduces loss of power due to internal pump-leakage in hydraulic systems. This results in typically 5 - 10% reduction in fuel or energy consumption. By reducing your usage of fuel and electricity, you can save money and provide the best protection for your equipment.

Champion 4000 ULTRA meets both summer and winter grade John Deere specs J20C and J20D as well as J20D/CNH MAT 3526 winter specifications. 4000 ULTRA also meets specs of most major tractor and equipment manufacturers for transmission/hydraulic oil. It also meets the Parker Hannifin HF-0 pump specification.

Part# 4001U 2/2.5 Gal.
Part# 4001AN 55 Gal

Lubricants

Ester of 12 hydroxystearic
Syntholube h-450
Oloa (additive package-no number)
Ia-160 additive package
Potassium persulfate
Triethylene glycol (w/ 4% cellulose acetate)
Precipitated silica 135
Copper pibsa
Fatty acid (trimer)
Polyethylene micro powder (40 mesh)
Precipitated silica (hi-sil 135)
Fyrol pcf (flame retardant)
Polybutene with eva
Hystrene 3675 (dimer)
Lexemul 561
Lexemul as
Lexolube n-110

Amines

Adma 12
Jeffamine 900
Rapi-cure (see uv inhibitor under new items)

Epoxies

E-purge (epoxy powder for purging)
Epoxy curing agent 87
Epoxy resin (for mfg powder coatings) $.66/lb.
Waterborne epoxy dispersion -$.77/lb.
Ortho creosol resin-$.88/lb.
Ketimine curing agent $.90/lb.
Epoxy resin (40% solids in mek) $.85/lb.