Find Verified Networking Internet Peripherals Suppliers, Manufacturers and Wholesalers

Cisco IOS Software Release 12.2(50)SE for Cisco Catalyst 3750-E, 3560-E, 3750, 3560, and 2960 Series Switches, Cisco Industrial Ethernet 3000 Series Switches, and Cisco Catalyst Blade 3000 & 3100 Switch Series

Cisco AC-Power - power cable

CiscoCatalyst 4500-X Series Switch is a fixed aggregation switch that delivers best-in-class scalability, simplified network virtualization, and integrated network services for space-constrained environments in campus networks. It meets business growth objectives with unprecedented scalability, simplifies network virtualization with support for one-to-many (Cisco Easy Virtual Networks [EVN]) and many-to-one (Virtual Switching System [VSS]) virtual networks, and enables emerging applications by integrating many network services.

Versatile and professional LTE 450 router with WiFi, Dual-SIM and further expansion options

DIN rail mountable, versatile, wireless DUAL SIM industrial LTE router with WiFi, Ethernet port and several expansion possibilities.

The device uses the open source OpenWRT® operation system, supporting web admin interface.

The following expansion options can be chosen: RS232/RS485, Wireless MBus or IO-expansion.



Communication
Supporting the LTE 450 (450MHz Cat.4 module)
Usage of Dual SIM cards
WiFi (for the connected devices)
It can be extended with the listed modules
Self-developed expansion modules to integrate
Ethernet LAN/WAN



Software/Configuration
Easy to use open source OpenWRT® software
Opportunity for the developers to implement and use self-developed system or applications
The device can be parameterized on its web page by the local/remote interface
Firmware & software updates and parameterizing remotely by the M2M Device Manager® software



Security
System monitoring, auto restart mode
High availability
Extended tests during the development
Protection from network attack, traffic monitoring helps to reduce data usage
Application

Wireless data transmission, routing
Secondary/backup route
Industrial M2M machines (to a Scada)
Utility smart meters (remote readout)
Safety camera, DVR

Data concentrator with 32 digital inputs and Modbus RTU communication


Cost-effective industrial solution for reading out the data of consumption metering devices (e.g. water, gas, electricity meters) equipped with contact or pulse output line.

Furthermore, the concentrator can connect to any kind of measurement devices, PLCs, controlling machines, data collection system, automata or a network analyzer.

The device is capable of collecting and storing data of up to 32 endpoint devices through the input lines.

The M2M Modem Plus IO® device is connected through the RS485 port to read out the input values with Modbus RTU protocol.



Connection
32x digital inputs (4 segment x 8 isolable inputs, operation mode selection by jumper)
Receiving and counting the contact/pulse signals
Dry/wet contact relay
Open collector input
Receiving the output signals as input signals (alternate wiring)
Receiving reed/hall sensor outputs
RS485 output (ModBus RTU protocol towards the modem)

Software/Configuration
Modbus protocol communication
Readout of Modbus counters, registers
PLC compatibility
Configuration software (locally on serial port)

Security
Watchdog circuit and system monitoring
Data storage into non-volatile memory


Application

Data collection and counting
Measurement and data collection systems
Forwarding industrial system or PLC data
Monitoring industrial or measurement devices
Remote control

Professional, wireless 4G LTE Cat.3 router

DIN-rail mountable, universal 4G LTE router with wireless data forwarding capabilities, Ethernet port and industrial design.

The device uses the open source OpenWRT® operation system and provides web admin interface.


Communication
Supporting the 4G LTE Cat.3 (Telit® module)
Ethernet LAN/WAN


Software/Configuration
Easy to use open source OpenWRT® software with webadmin interface
Opportunity for the developers to implement and use self-developed system or applications
Firmware & software updates and parametrizing remotely by the M2M Device Manager® software


Security
System monitoring, auto restart mode
High availability and stable IP connection
Protection from network attack, traffic monitoring helps to reduce data usage


Application

Wireless data transmission, routing
Secondary/backup route
Industrial M2M and measurement, data collecting devices, PLCs (to a Scada)
Remote access, monitoring, maintenance
Utility smart meters (remote readout)
Safety camera, DVR

Product description
AX3000 Wi-Fi 6 GPON ONU is pure data HGU products following ITU-T, IEEE, and industry standards. Fully
considering the existing cable TV network in the rapid development of the "integration of the three networks" business
needs, to meet the needs of users for various value-added services, which can quickly improve the market
competitiveness of cable TV operators, and well meet the application of radio and television FTTH.
Main advantage
1. Support optical fiber switching technology, Self-adaptive EPON or GPON OLT local terminal. The selection of
working mode is completed automatically by the equipment, without manual participation in setting and operation.
2. EPON mode supports 1.25Gbps PON transmission rate with upstream and downstream
symmetry, and GPON mode supports 1.25Gbps with 2.5Gbps PON downstream transmission rate. Efficient
bandwidth utilization and Ethernet service support capabilities help operators provide reliable service quality
assurance for their users.
3. Low-power design, ONU < 8W.
4. It is suitable for a variety of business application scenarios, and can be flexibly expanded and upgraded online
according to business needs.
5. The product is designed with the equipment interface and status indicator light on both sides of the device for
convenient installation and intuitive display.
www.e-skybest.com
____________________________________________________________________________________________________________________
CHONGQING E-SKYBEST ELECT CO.,LIMITED
Factory address: Second Floor, building No. 7, Phaseâ? , Standard Workshop, South District, Zitong Street Industrial Park, Tongnan District, Chongqing.
Shenzhen office: No.406 Room, Yuan Meng building, Ming Le Industrial Park, Mingzhi Street,Long Hua district, Shenzhen city, China.
Page: 1 / 4
Main features
1. It adopts point-to-multipoints network topology to effectively collect and gather scattered Ethernet services from
users, and provide standard RJ45 fast Ethernet interface on the user side to smooth interconnection with the existing
network.
2. Realize reliable service quality (QoS) to ensure the service quality of different services in the same network.
3. Support IGMP multicast to effectively use broadband.
4. Provide 4 Gigabit Ethernet ports to support port isolation. Support for Ethernet loop detection.
5. Provide 1 POTS port to quickly open voice calls.
6. Support Ethernet loop detection, it can automatically determine whether the network connected to the device is
blocked by Ethernet loop, and can automatically recover when the loop disappears.
7.Support for VLAN.
8. Abundant OAM and OMCI function designs, including configuration, alarm, performance monitoring, fault isolation
and security management, etc., which not only provides remote management through OLT, but also supports local
console management.

Product description
AX3000 Wi-Fi 6 GPON ONU is pure data HGU products following ITU-T, IEEE, and industry standards. Fully
considering the existing cable TV network in the rapid development of the "integration of the three networks" business
needs, to meet the needs of users for various value-added services, which can quickly improve the market
competitiveness of cable TV operators, and well meet the application of radio and television FTTH.
Main advantage
1. Support optical fiber switching technology, Self-adaptive EPON or GPON OLT local terminal. The selection of
working mode is completed automatically by the equipment, without manual participation in setting and operation.
2. EPON mode supports 1.25Gbps PON transmission rate with upstream and downstream
symmetry, and GPON mode supports 1.25Gbps with 2.5Gbps PON downstream transmission rate. Efficient
bandwidth utilization and Ethernet service support capabilities help operators provide reliable service quality
assurance for their users.
3. Low-power design, ONU < 8W.
4. It is suitable for a variety of business application scenarios, and can be flexibly expanded and upgraded online
according to business needs.
5. The product is designed with the equipment interface and status indicator light on both sides of the device for
convenient installation and intuitive display.
www.e-skybest.com
____________________________________________________________________________________________________________________
CHONGQING E-SKYBEST ELECT CO.,LIMITED
Factory address: Second Floor, building No. 7, Phaseâ? , Standard Workshop, South District, Zitong Street Industrial Park, Tongnan District, Chongqing.
Shenzhen office: No.406 Room, Yuan Meng building, Ming Le Industrial Park, Mingzhi Street,Long Hua district, Shenzhen city, China.
Page: 1 / 4
Main features
1. It adopts point-to-multipoints network topology to effectively collect and gather scattered Ethernet services from
users, and provide standard RJ45 fast Ethernet interface on the user side to smooth interconnection with the existing
network.
2. Realize reliable service quality (QoS) to ensure the service quality of different services in the same network.
3. Support IGMP multicast to effectively use broadband.
4. Provide 4 Gigabit Ethernet ports to support port isolation. Support for Ethernet loop detection.
5. Provide 1 POTS port to quickly open voice calls.
6. Support Ethernet loop detection, it can automatically determine whether the network connected to the device is
blocked by Ethernet loop, and can automatically recover when the loop disappears.
7.Support for VLAN.
8. Abundant OAM and OMCI function designs, including configuration, alarm, performance monitoring, fault isolation
and security management, etc., which not only provides remote management through OLT, but also supports local
console management.

ï??Provide 1-8 E1 channels interface transparently, confirming to ITU-G.703.
ï??High transmit efficiency, low transmit delay.
ï??Provide 4*E1 channels and 2*10/100/1000Base-TX and 1*1000Base-X interface.
ï??The length of Ethernet packet can be set, supporting huge packet.
ï??User can select IP protocol encapsulation or simplicity Ethernet type.
ï??Support VLAN setting.
ï??Support Ethernet ping function.
ï??Support package loss indicator function for E1 transmission line.
ï??Local and remote E1 loop and local E1 enable function.
ï??Point to point or point to multi-points connections, satisfying different applications.
ï??High efficiency transmission, up to 90% bandwidth utility ratio.
ï??Support two type interfaces-75�© and 120�©-unneed setting.
ï??10/100/1000M Ethernet, full/half duplex auto-adapt, support auto-MDIX.
ï??When selecting network adaptation clock, it can resume the original clock accurately through TDM clock resumption mechanism, stable clock, little jitter and small excursion, conforming to ITU-T clock jitter and excursion standard.
ï??The device Support WEB management platform, online software upgrades, the host side can manage the work of each state machine equipment;

24-Port 10/100/1000BASE-T RJ45 copper with IEEE
802.3at/af Power over Ethernet Injector function
4-Port 10/100/1000Mbps TP and SFP shared combo
interfaces, supporting 100/1000Mbps dual mode
RJ45 console interface for basic management and setup
Web smart management for easy application.
Bandwidth management based on port input and output
SNMP V1/V2/V3 management
Support loop protection, automatic recovery
Plug & play, no configuration required

*. Input:100-240VAC 50/60Hz
*. Output:48VDC 0.32A 15.5W
*. AC socket: IEC320 C6 or C8 optional

*.Ethernet rate: 10/100/1000Mbps gigabit

*.Pin assignment: Pin 12/36 & 45/78, 4 pairs

*.Protocol Standard:Active type, compliance with IEEE802.3 Standard

*.Appliance: IP camera, poe switch, wifi AP ect

*.output type: Single output

*.Efficiency: 84% Min

*.Ripple & Noise:4800mV p-p

*.MTBF:45000hours

*. Protection:OVP SCP OCP OTP

*. Material: Plastic housing, Compliance UL 94 V-0
*. Warranty:2 years

*.Color: Black

New Passive PoE Injector single output 52VDC 90W PoE power supply Dual RJ45 PoE adapter for 5G Ethernet Switch Antenna
*. Input:100-240VAC 50/60Hz*. Output: 52Vdc 90W
*. AC socket: IEC320-C14, 3 pins socket

*.Ethernet rate:1G/2.5G/5G

*.Connector:1*RJ45 for PoE + 1*RJ45 for LAN

*.Pin assignment: Pin 12/36 & 45/78, 4 pairs

*.Protocol Standar:Non-IEEE802.3AF/802.3AT, Passive type

*.Appliance: IP camera, poe switch, wifi AP ect

*.output type: Single output

*.Efficiency: 85% Min

*.Ripple & Noise:480mV p-p

*.MTBF:45000hours

*. Protection:OVP SCP OCP OTP

*. Material: Plastic housing, Compliance UL 94 V-0
*. Warranty:2 years

*.Color: Black

Company Profile


* GRT established
in 2007, is the manufacturer who specialized in
research and development, production, sales, service as
one.

GRTis located in Shunde(the Kingdom of Home-Appliance),
owns several Senior professional engineers, to
research, develop and

design kinds of power supplies and provide various
customized solutions. *.All items is with 2% output
accuracy and compliance

with international standard. Owns license of Importing
and Exporting and Pass kinds of international approvals
like as UL,

GS,TUV,CCC,CE, FCC,ROHS,ERP,PSE, CB,SAA ect, suitable
for the global markets.

*.Owns ISO9001:2015 and kinds of advanced machines for
production and testing.

*.Owns two green workshops which covers area 8000
square meters. monthly output upto 880K



Our Services & Strength

*. Offer OEM service, accept print your own logo and
special requirements for package and others

*. Experienced Technical team, to provide kinds of
solutions

*. Provided authorized certifications

*. 100% Full Burn-In Testing, strictly inspect and
control during production


FAQ


1.MOQ
:500pcsas the the first order, small qty
(more than 100pcs) will be
acceptable.



2.Sample terms

*Common sample:2pcs are free offered, the
buyer shall pay for the shipping cost and
Tax; Leadtime within one week

*. Special Sample: the buyer shall pay for
the sample cost, shipping cost, Tax,
R&D cost (if caused)

Leadtime will be confirmed when the project
starting



3. Mass production

20-25 working days, from the day got the
confirmed order and payment



4. Shipment

By Sea, By Air, By Train, By Express
ect



5.Payment: T/T in advance, L/C

Passive PoE Injector 24VDC 1A 24W PoE adapter 100Mbps Ethernet switch antennae networking AP CCTV camera

*. Input:100-240VAC 50/60Hz
*. Output: 48Vdc 1.25A 60W
*. AC socket: IEC320-C14, 3 pins socket

*.Ethernet rate:10/100/1000Mbps Gigabit

*.Connector:1*RJ45 for PoE + 1*RJ45 for LAN

*.Pin assignment: Pin 12/36 & 45/78, 4 pairs

*.Protocol Standard:Passive type, Non-compliance with IEEE802.3 Standard

*.Appliance: IP camera, poe switch, wifi AP ect

*.output type: Single output

*.Efficiency: 86% Min

*.Ripple & Noise:480mV p-p

*.MTBF:45000hours

*. Protection:OVP SCP OCP OTP

*. Material: Plastic housing, Compliance UL 94 V-0
*. Warranty:2 years

*.Color: Black

Gigabit Passive PoE Injector 48VDC 0.5A 24W PoE adapter 1000Mbps Ethernet switch antennae networking AP CCTV camera
*. Input:100-240VAC 50/60Hz
*. Output:48VDC 0.5A 24W
*. AC socket: US plug, 2 pins plug

*.Ethernet rate: 10/100/1000Mbps gigabit

*.Pin assignment: Pin 12/36 & 45/78, 4 pairs

*.Protocol Standard:Passive type, Non-compliance with IEEE802.3 Standard

*.Appliance: IP camera, poe switch, wifi AP ect

*.output type: Single output

*.Efficiency: 84% Min

*.Ripple & Noise:4800mV p-p

*.MTBF:45000hours

*. Protection:OVP SCP OCP OTP

*. Material: Plastic housing, Compliance UL 94 V-0
*. Warranty:2 years

*.Color: Black

High intensity focused
. The effective penetration depth of High intensity focused is 8cm, covering the whole neural network anddriving the contraction of the whole musclelayer;
.The effect of fat apoptosis and "super muscle exercise" can never be achieved by physicalexercise;
.Studies in the United States have shown that the effect of four treatments is the best;
.The treatment experience is good.

EMS
Most of the energy of the current is concentrated in thesurface layer, only a small part can reach the muscle;
Feeling a slight tingling or contraction;

Advantageï¼?
Easy to lose weight and rebuild your body shape
Dissolve fat
Simplicity ofoperator
Tyra firming
thin arms
thin legs
thin belly
thin body
thin buttock

Mfr No:
IPP60R060P7XKSA1

Manufacturer:
Infineon Technologies

Package:
TO-220-3

Category:
Single FETs, MOSFETs

Rohs:
Lead free / RoHS Compliant

Description:
High-voltage, high-speed power electronics component for demanding industrial and commercial applications

Usb hub lapcare,zebronics,adnet,prodot,enter and in expensive fingers,portronics etc.

This FiberHTT 1550 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 80km. The SFP+ 80km module electrical interface is compliant to SFI electrical specifications. The
transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.

This FiberHTT 1310nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 40km. The SFP+ 40km module electrical interface is compliant to SFI electrical specifications. The
transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.

This Hengtaitong 1310 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km. The SFP+ 10km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.