Find Verified Cutting Oil Suppliers, Manufacturers and Wholesalers

High spindle rotation. Cut two 45° (one 45°at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45°saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum â?¦â?¦ ).
1. Double-pole synchronous saw cutting: cut two 45° (one 45°at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting.
2. Stamp foot switch to auto press and saw materials, which is safe and easy.
3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp.
4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming.
5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform).

Model ZG-350SA2
Sawing angle 45Ã?2
Max. sawing width 90mm
Max. sawing height 140mm
Spindle speed 3300R.P.M
Saw blade tungsten steel head; alloy saw blade
Dimension of work surface 870Ã?190Ã?800mm
Machine motor 2HPÃ?2
Air pressure 6kg/cm2
Machine dimension 1410Ã?900Ã?1300
Packing dimension 1500Ã?980Ã?1420mm,2500*150*100
NW/GW 390/460kg

High spindle rotation. Cut two 45° (one 45°at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45°saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum â?¦â?¦ ).
1. Double-pole synchronous saw cutting: cut two 45° (one 45°at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting.
2. Stamp foot switch to auto press and saw materials, which is safe and easy.
3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp.
4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming.
5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform).

Model ZG-350SA2
Sawing angle 45Ã?2
Max. sawing width 90mm
Max. sawing height 140mm
Spindle speed 3300R.P.M
Saw blade tungsten steel head; alloy saw blade
Dimension of work surface 870Ã?190Ã?800mm
Machine motor 2HPÃ?2
Air pressure 6kg/cm2
Machine dimension 1410Ã?900Ã?1300
Packing dimension 1500Ã?980Ã?1420mm,2500*150*100
NW/GW 390/460kg

Product features:
Yellow or light yellow viscous and oily liquid. Molecular formula is c25h45cl7, average molecular weight is 594. It is inflammable, non-explosive, non-volatile and non-toxic. Soluble in most organic solvents, insoluble in water and ethyl alcohol. Quality index: meets the industrial standard hg2091-91 of the people's republic of china

Quality index:
Itemindex
Color (iodine)3-10
Density (50c)g/cm31.13-1.17
Chlorine content (%)40-44
Viscosity (50c)mpa.S450
Refractive index nd201.500-1.508
Heating loss (%130c, 2h) 0.3
Thermal stability index (175c, 4 hours, nigrogen10l/h) hcl% 0.2
Thermal decomposition temperature 150

Uses:
The product can be widely used in pvc products as plasticizer and flame retardant. It can also be used as additive for rubber, paint and cutting oil.

Packing, storage and transportation:
Keep in dry, clean, and rustless 200l galvanized iron drum, net weight (200â±0.5 ) kg/drum.
Dry and clean lbc ton drum, net weight 1 ton/drum.
Keep in cool, dry and well-ventilated place. To protect from sunlight and rain. Handle with care during transportation

.

Items Parameters
Thread rolling thread range diamete �?60mm
thread pitch 6mm
Spindle Angle �±10�°
Maximum rolling pressure 250kn
Spindle RPM Exchange gear 22/28/35/45/56/70rpm
Thread rolling wheel range diameter �?210mm
aperture �?75mm
Maximum width 160mm
Rolling time 0.1-99.9s
Pause time 0.1-99.9s
Spindle drive power 11kw
Hydraulic transmission power 3.0kw
Cutting oil Pump driving motor 90w
Physical size 1800Ã??1600Ã??1450mm
Machine weight 2100kg

Expolube ûinhibit
A bacterial inhibitor for soluble cutting fluids

ôsolubleö cutting oils used as coolant-lubricant in high speed metal cutting, grinding, rolling, etc., are vulnerable to
æù after emulsification with water. Microbial activity causes the oil emulsion to become progressively unstable due to emulsifier breakdown, this finally leads to the separation of free oil droplets which coalesce to form ætramp oilÆ floating on the surface of the fluid in the coolant well. Concomitantly, the ph of the emulsion falls, introducing a corrosive propensity in addition to the loss of lubricity. The economic justification for control of microbial degradation of cutting fluids by the addition of biocides devolves from the extended useful life of the emulsion that results, fewer rejects than would otherwise eventuate, prevention of foul odours and thus maintenance of hygienic working conditions for personnel.


50 kg &220 kg

Centrifugal oil cleaners

With the centrifuge you will be able to :

Remove contaminats from lube oil to 0.3 micron and below.
Double your oil drain interval.
Reduce wear and tear of main and camshaft bearings.
Extend life of your turbocharger.
Extend life of your piston rings and liners.
Extend time between engine overhauls.
Separate metal particles like copper, aluminium, g.M.From oil in case
Of metal cutting oil and extend life of oil.
One time investment
Payback period is 6 to 7 months, if engine is running continuously.

Tetra-polypropylene was synthesized with maleic anhydride, distilled, hydrolyzed with water and filtered.
Good oil solubility, for non-ferrous metals: steel, copper, aluminum has good rust resistance, used in the anti-rust oil, rust-proof membrane adsorption on the metal surface can be formed, prevent metal corrosion, is good for non-ferrous metal rust resistance is widely used in various types of anti-rust oil and cutting oil and turbine oil, hydraulic oil, gear oil, grease.

Hose for fuel, lubricating oil
The characteristics of:
For the vast majority of oil and chemical products, not brittle no swelling.
Resistance to ozone and ultraviolet radiation
Suitable for delivery of gasoline , diesel, heating oil, cutting oil and glycol refrigerant compound

The water-soluble reverse-demulsifiers can be used to treat contaminated cutting oils, but also for other industrial oil-in-water emulsions, as can be encountered in various industries. Clarification of the waterphase is the main objective.
Coalescence agents are used to destabilise this type of emulsions by increasing the size of the oil-droplets present.
They can be used together with flocculation agents to accelerate the separation process and/or to improve overall clarification.

Price unit: inch/KG
incoterm : EXW or DAP

Main parameters:
Spindle speed:1400r/min
Dimension:840*540*1070mm
Weight:150kg
Function:the automatic single-tool seal gem cutting machine adapt high quality bearing and rail to provide high cutting accuracy and cutting speed.Apply automatic feeder and travel control switch for stable operation.The gem material is fixed on the platform and the travel switch distance is set,then the machine can auto stop after the cutting process is finished.

Features:
1.One personel can operate 5-6 machines
2.With the protective cover, more secure,low noise, non-pollution
3.Apply oil pump to cycle supply cutting oil,to lower the cost and consumables
4.Suitable for cutting the gem with width less than 40cm
5.The max. load blade size is 30inch(75cm)





Dimension:840*540*1070mm
Weight:150kg

Good oil solubility, non-ferrous metals: steel, copper, aluminum have good rust resistance, applied in rust resistance oil, can form rust resistance oil film adsorption on the metal surface, prevent metal corrosion, non-ferrous metals have good rust resistance performance is widely used in various types of rust resistance oil and cutting oil.

Products principle :
The principle is to use oil and water differences between gravity and surface tension, and other characteristics, when blowing across the surface with oil and draw away at the surface of oil slicks, nc-40 mechanical bar screen belonging to oil slicks in profits in addition to fishing in addition to small oil slick devices, small size, can be directly connected to the machine tools, the models used cnc machine tools, cnc machine tools , drilling, milling machines, grinders and other machines in the cooling of the oil-water separation, the units cooling water(coolant), washing machine cleaning ducts machine tools on.
Is has the following three functions:
1、significantly increases the life of cutting agent, therefore reducing operation cost, because the gravity of waste oil is lower than that of cutting agent, so waste oil will surely float on the cutting agent (coolant), while on air-tight conditions, cutting agent is easy to oxidize, deteroprate and produce odor, so it has to be replaced frequently, this will increase cost. If we install this machine, the floating oil will be cleaned, life of cutting agent is thus prolonged significantly, cost will go down accordingly. (the life of cutting agent will be prolonged from 1 week to 3 even 6 months). 2、protects the blades of machine tool, if the cutting agent or cutting oil contains other waste oil or impurities, first, it will influence the accuracy of cutting; second, it will seriously damage the blades.

Methyl Ricinoleate

PARAMETERS SPECIFICATIONS
Synonyms : RICINOLEIC ACID METHYL ESTER, METHYL ESTER OF RICINOLEIC ACID
CAS No. : 141-24-2
Formula : C19H36O3CH3(CH2)5CH(OH)CH2-CH=CH(CH2)7 COOCH3
Mol. Wt. :312.45
Purity : Min. 85% Ricinoleate by GC
Description: Pale yellow to Dark Yellow Liquid
Acid Value:3.0 Max.
Saponification Value : 174 - 187
Iodine Value : 78 - 88
Hydroxyl Value : 160 - 172
Moisture :0.75% Max.
Uses : Methyl Ester of Castor Oil is used in place of Castor Oil in the production of hydraulic fluids. Methyl Ricinoleate is found to be of use in ethyl cellulose, nitrile rubber, nitrous and polyvinyl butyral lacquers.

DESCRIPTION:-

Acme Synthetic Chemicals is the Manufacturer, Supplier & also Exporter of Methyl Ricinoleate.

Methyl Ricinoleate is also known as Methyl Ester of Ricinoleic Acid & Ricinoleic Acid Methyl Ester which is classified under CAS No. 141-24-2.

Acme Synthetic Chemicals is one of the reputed organizations engaged in providing superior quality Methyl Ricinoleate (Ricinoleic Acid Methyl Ester, CAS No.141-24-2) to our esteemed clients.

Methyl Ricinoleate (Ricinoleic Acid Methyl Ester, CAS No.141-24-2) is used in several lubricating formulations, cutting oils and gear oils, motor fuels, cylinder lubricants etc.

Methyl Ricinoleate (Ricinoleic Acid Methyl Ester, CAS No.141-24-2) delivers additional benefits of anti- rusting and corrosion.

Methyl Ricinoleate (Ricinoleic Acid Methyl Ester, CAS No.141-24-2 ) is also used as a plasticiser in several industries such as phenolic moulding resins, spray resin systems, rubber polymers etc.

Methyl Ricinoleate (Ricinoleic Acid Methyl Ester, CAS No.141-24-2 ) use as dispersing agent, mulsion stabilizer, conditioning agent, emollient in personal care products.

Methyl Ricinoleate (Ricinoleic Acid Methyl Ester, CAS No.141-24-2 ) use as a plasticizers in pharmaceuticals industries & as perfumery chemicals in cosmetic industries.

We can offer Methyl Ricinoleate (Ricinoleic Acid Methyl Ester, CAS No.141-24-2) in drums / FCL Lots and ISO Tanks.

Methyl Ricinoleate (Ricinoleic Acid Methyl Ester, CAS No.141-24-2 ) is packed in 190 kg HMHDPE ( plastic ) drums.

Each FCL can take 80 drums of Methyl Ricinoleate (Ricinoleic Acid Methyl Ester, CAS No.141-24-2).
An ISO tank can take between 18 to 20 tons of Methyl Ricinoleate (Ricinoleic Acid Mehylt Ester of CAS No.141-24-2 ).

Our current capacity for Methyl Ricinoleate (Ricinoleic Acid Methyl Ester, CAS No.141-24-2 ) is 1200 tons per annum.

The offered product Methyl Ricinoleate (Ricinoleic Acid Methyl Ester, CAS No.141-24-2) is formulated using supreme class ingredients and modern techniques by our team of skilled professionals as per the set industry norms at our state-of-the-art processing unit.

This Methyl Ricinoleate (Ricinoleic Acid Methyl Ester, CAS No.141-24-2) is widely demanded in the international market due to its high effectively, eco-friendliness & purity, and is offered in different packaging options to meet the varied needs of our clients. Moreover, we are offering the entire range at an affordable cost to our clients.


Packaging : 190 kgs net hmhdpe drum.

Engine oil
Hydraulic oil
Cutting oil
Gear oil
Brake fluids
Compressor oil
Grease

Sutiable metal surface cutting oil/stamp oil /lubricating oil/processing oil stains removeral

Vzen Cutting Oil Soluble is premium quality soluble oil blended from refined mineral oil, emulsifier and other performance enhancer additives. It forms extremely stable milky emulsion of the Oil in Water type. This oil has exceptionally high emulsion stability even with extreme hard water (400 ppm) leading to excellent tool life and finish in all metal cutting operations, where cooling is more important than lubrication. It does not decompose chemically and leave objectionable odour, cause discoloration and staining.

Function introduction
The HCY010 ~ HCY035 Series Oil Cooler provides thermostatic (±2.5â??) circulating oil, satisfying long-term steady cooling requirement of the heat generating equipment with a heat load less than 3500W.

Scope of application
Cooling of spindle of CNC machining equipment, cooling of hydraulic equipment, cooling of cutting oil etc.

Z Premium Straight Cutting Oil Recommended for Cutting, Grinding, Milling, Deep Hole Boring, Drilling, Gear Shaving, Gear Hobbing, Screw Cutting etc. These Oils reduces tool wear and improves machinability.

A premium quality, general purpose, emulsifiable oil which provides
optimum cooling and lubricant in metal cutting and grinding operations. It
mixes readily with water to from stable emulsions, has good rust- preventive
properties and is inhibited against foaming. It resistance to bacterial attack
prolongs the storage life of the emulsion. The most common mixtures are
20:1 for machining and 30:1 for grinding.

TESTS
Density @15 oC : 0.97
Color, ASTM : 2.5
Viscosity Approx, cst @ 40 o C : 69
Emulsion appearance : Milky white

Isothiazolinones is composed of 5-chloro-2-methyl-4-thiazoline-3-ketone (CMI) and 2-methyl-4-thiazoline-3-ketone (MI). The bactericidal effect of Isothiazolinones is carried out through breaking the bond between bacteria and algae protein. When contacted with microbes, Isothiazolinones can quickly inhibit their growth, thus leading to death of these microbes. Isothiazolinones has strong inhibition and biocidal effects on ordinary bacteria, fungi and alga, and has many advantages such as high biocidal efficiency, good degradation, no residual, safety in operation, good compatibleness, good stabilization, low cost in operation. Isothiazolinones can mix with chlorine and most caution, anion, and non-ionic surfactants. When used at high dosage, its biosludge stripping effect is excellent. Isothiazolinones is a kind of fungicidal with properties of broad spectrum, high efficiency, low toxicity and non-oxidative, it is the ideal biocidal in industrial circulating cool water system and in wastewater treatment in oilfield, papermaking, pesticide, cutting oil, leather, detergent and cosmetics etc.

Grade I : Grade II
Appearance : Amber transparent liquid : Light yellow or light green transparent liquid
Active content % : 14.0 min : 1.50 min
pH value(as it) : 1.0-4.0 : 2.0-5.0
Density (20¡æ)g/cm3 : 1.25 min : 1.02 min
CMI/MI (wt %) : 2.5-4.0 : 2.5-4.0.