Find Verified Silicon Sheets Suppliers, Manufacturers and Wholesalers

Model:728
Appearance:white
Viscosity(cs):15000-17000
Hardness(shore a):26-28
Tensile strength (kgf/c o):35
Tear strength (kgf/ m):22
Elongation (%):470
Mixing ratio (%):2~3
Operating time(h):0.5
Curing time(h):2~4




32x32x46cm/durm
25kg/durm.

Solid Silicone Sheet/ Silicone Rubber Sheet materials are inventoried by Seashore Manufacturing Limited from 0.5mm to 20mm thick and 30 to 70 durometer(hardness) Shore A.

Our Solid silicone sheeting continues to grow and is available in four standard colours white, translucent, red oxide and black.

The dimensions for silicon rubber sheet of our stock stardard is in the following:

500mmx500mmx0.5mm
800mmx800mmx1.0mm
1000mmx1000mmx1.5mm

1000mmx10mx from 1mm to 20mm
1200mmx10mx from 1mm to 20mm
1500mmx10mx from 1mm to 5mm
1800mmx10mx from 1mm to 5mm
2000mmx10mx from 1mm to 5mm

The specification of most standard silicone sheet we produce are as below:

Density:1.25 g/cm3
Handness:55 Shore A
Tensile strength:7.0 mpa
Elongation at Breakage:320%
Tension Set:8%
Tear Strength:20 KN/M
Heat Resistant: 200 C

Sizes Thinkness tolerance(+/-mm)

10mx1m or 1.2mx1mm 0.1
10mx1m or 1.2mx2 to 6mm 0.2
10mx1m or 1.2mx7 to 10mm 0.3

The above is silicone rubber sheet standard at Shore A Hardness 40,50,60. Other sizes, colours and hardnesses are available on request.

Beside standard ones,we supply FDA food grade silicone sheet,anti-static silicone sheet,anti-acid silicone sheet.
Special silicone sheet is use of wood/chipboard laminating,glass industrial,solar industrial.

Our Solid silicone rubber sheet is 200 degree centigrade temperature resistant as standard,but we also can do high temperature resistant up to 270 degree centigrade.
Sponge Silicone Rubber Sheet
100% closed cell Silicone Rubber material,double sides fabric impression or smooth finished.

Our sponge silicone sheeting is available in four standard colours white, red oxide,black.

The dimensions for sponge silicon rubber sheet of our stock stardard is in the following:

1000mmx1000mx from 3mm to 20mm
2000mmx1000mx from 3mm to 20mm
5000mmx1000mx from 3mm to 20mm

The above is sponge silicone sheet standard at Shore A Hardness 10,20,30. Other sizes, colours and hardnesses are available on request.

Our sponge silicone rubber sheet is 200 degree centigrade temperature resistant as standard.

Sponge silicon rubber sheet material is readily fabricated into gaskets and cushioning pads.

Insertion rubber sheet
General Insertion rubber sheet is manufacturing by SBR rubber material and Natural rubber material compounded.However,we also can put insertion into Neoprene rubber sheet and EPDM rubber sheet.Our insertion rubber are including general PE100 insertion rubber sheet and nylon insertion reinfore rubber sheet.

It have good resistant to aging and temperature.They are widly using in industrial,mine,from decorative to rubber rolling flooring runners etc.Further more,this rubber sheet can be provessed into die cut parts,strips or pads.

Thickness range from 1mm to 50mm.

Width available are 1m to 2m or cutting to other width according to your requirement.

Smoothly glossy finish or both side fabrics impress on finish. Continuous length.

Silicon metal (si 99.28%)

Silicon metal-553
Silicon metal-3303

1.Application of brushing rtv-2 molding silicone rubber :

Brushing rtv-2 molding silicone rubber mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
2.Operation instruction of brushinng silicone rubber :

Brushing rtv-2 molding silicone rubber is composed of two components.Component a is white flowing liquid while component b is the curing agent.
Steps:
A. Take silicone rubber of 100g and add 2% curing agent for mixing evenly.
B. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles.
C. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Note: brushing rtv-2 molding silicone rubber is used for pouring or brushing technique. That is to say,
Firstly fix the product or sole model to be duplicated onto a plane plate,
Then enclose the plane frame with wooden plates to prevent the leakage of the silicon ,
Thirdly mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100: 2 and pour them onto the sole model,
At last brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.
3. Storage and precautions of brushing molding silicone rubber :






25kg/drum, 200kg/drum

Usage of liquid rtv silicone rubber for sculpture molding

Liquid rtv silicone rubber for sculpture molding is intended for making silicone rubber mold for resin crafts, candles, plastic toys, relieve furniture, architectural decoration, furniture decoration, sculpture and so on.
Feature of liquid rtv silicone rubber for sculpture molding
Liquid rtv silicone rubber for sculpture molding is flowing liquid with general hardness of 22-50 a ++p after curing with features:
1) low shrinkage
2) good operation
3) high tear and tensile strength
4) curing agent free
5) easy de-mold
6) high reproduction times
7) resistance to deformation and high-temperature, acid-alkali

Operations of liquid rtv silicone rubber for sculpture molding

If customers want to make large products and large size moulds, the mould should be made of silicone rubber with high hardness. On the contrary, if the mould with fine and precision patterns, it should be made of silicone with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If mould requiring fast drying and demould, more curing is needed.







25kg/drum, 200kg/drum

Applications of rtv 2 molding silicon rubber:
Silicone rubber is mainly applicable to manual mold design, pvc plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.

Description of rtv molding silicon rubber:
Silicine rubber for manual moid is flowing liquid with consistant quality in whatever color. It consists of two components, wherein component a is silicone rubber, and component b is curing agent or vulcanizing agent. Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicone rubber, add 2-3% solidifying agent, and mix evenly for use. One mold pair can be solidified and formed in 2-3 hours. The formed mold can be used repeatedly without deformation and water shrinkage and with high temperature resistance, thereby providing fast duplication of the product with a product shrinkage 2. The 418 manual mold silicon is mainly applicable to manual molds and small number of product duplication.

Operation instruction of rtv molding silicon rubber::
1. The manual mold silicon is applied to small products or products with fine patterns. The mold for the fine detailed and small products should be made of soft silicon to protect the products from easy breaking when demoulding.
2. If large product duplication or fabrication, the mold should be made of higher hardness silicone rubber so that the products made will not deform.







25kg/drum, 200kg/drum

Silicone Sheet

Durable seaworthy packing

As your requirement

As your requirements

We are the manufacturer & exporter of all kinds of rubber sheets, rubber compounds, reclaimed rubber, crumb rubber, rubber chemicals & all other related products like precured tread rubber

50 kg

Rubber Sheet: Nature Rubber, Viton Rubber, EPDM

Use of Sheets: Automobile Industry, Construction industry, Space industry etc.

Sample Service: Free Samples

Good quality and sell well

We provide raw materials for some large-scale factories in Europe.

Spec. Si%min Fe%max Almax Ca%max Size
553 98.7 0.5 0.5 0.3 10-100mm
441 99.1 0.4 0.4 0.1 10-100mm
331 99.35 0.3 0.3 0.05 10-100mm
2202 99.58 0.2 0. 2 0.02 10-100mm
2502 99.48 0.25 0.25 0.02 10-100mm
3303 99.37 0.3 0.3 0.03 10-100mm


10~100mm
1mt 1 plastic woven bag

Mold making silicone rubber is primarily intended for poly resin crafts, pu crafts, pu resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy stationery gifts crafts industry, a large statue buddha, furniture, furniture decorative materials, statues buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. any more information, please feel free to contact.


25kg /drum 200kg /drum

Specification(sheets or rolls):
A. Sheets: 500*500*0.7-1mm
B. Sheets or rolls: 500*1.5mm above
C. Sheets or rolls: 1000*2mm above
D. Sheets or rolls: 914.4*2mm above
E. Sheets or rolls: 1200*2mm above.
F. Sheets or rolls: 1500*2mm to 10mm
Conforms to the national profession standard: hg/t2949


Polybags and pallets

Silicone rubber sheet.

Manual mold silicone rubber is mainly applicable to manual mold design, pvc plastic molds, cement products molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, electronic appliance vibration resistance.

25kg/drum

Description of rtv silicon rubber:
Silicine rubber for manual moid is flowing liquid with consistant quality in whatever color. It consists of two components, wherein component a is silicone rubber, and component b is curing agent or vulcanizing agent. Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicone rubber, add 2-3% solidifying agent, and mix evenly for use. One mold pair can be solidified and formed in 2-3 hours. The formed mold can be used repeatedly without deformation and water shrinkage and with high temperature resistance, thereby providing fast duplication of the product with a product shrinkage 2. The 418 manual mold silicon is mainly applicable to manual molds and small number of product duplication.



25kg/drum, 200kg/drum

Silicon.

Silicone bakeware

1.100% food-grade silicone material
2.Non-stick finish durable and easy-cleaning
3.Welcome customer's design
4.Any color availiable

Rtv-2 room-temperatue sulfureted silicon rubber

Silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts, lighting and candle crafts.