Find Verified Metal Metal Products Suppliers, Manufacturers and Wholesalers

Aluminum Ingot A7 generally refers to primary aluminum ingot of high commercial purity, commonly traded for industrial remelting and manufacturing .

Silicon (Si) : 0.20%
Iron (Fe) : 0.20%
Copper (Cu) : 0.10%
Zinc (Zn) : 0.10%
Manganese (Mn) : 0.05%
Magnesium (Mg) : 0.05%
Other impurities : Controlled
Appearance : Silver/metallic
Form : Cast ingot
Surface : Clean, free from excessive oxidation/contamination
Packaging : Bundled/palletized

A copper ingot is a purified, solid rectangular block of copper, typically weighing 25-35 kg, produced by casting molten copper into molds for easy transport, storage, and industrial processing. Due to high electrical/thermal conductivity and corrosion resistance, they are primarily used to manufacture copper wire, pipes, alloys, coins, and construction materials.

We also Offer
Copper Powder
Copper Plate

Please note: for price quotation, send us a message.

Thank you

Specification: Electrolytic Grade A 99.99% copper cathode. LME registered & Non-LME registered.

DIMENSION: 914mm x 914mm x 7mm ; 36 inch X 36 inch X 0.25 inch (approx.)
Weight of each sheet: 125 kgs +/-1%

QUANTITY:
A: Trial order: Monthly 100 MT (Buyer can request less quantity with intention)
B: Contract: Upon trial shipment ( Monthly up to 1000 MT with 11 Months contract)

INSPECTION: SGS or equivalent inspection for Quality and Quantity of the commodity at loading place.

PAYMENT TERMS: 100% LC or SBLC

INCOTERMS: FOB/ CIF / CFR / Ex-warehouse such as Steinweg, Comexas, Bollore & Manica.

DESTINATION PORT: Upon Buyer's interest (ASWP)

Used Rails

SPECIFICATION:

R50-R60 AND R65 With (ISRI) Standard
Lengths: Standard 1.5 -6 Metre Length

ORIGIN: Europe, Russia & Africa.

MINIMUM ORDER QUANTITY: 25,000 MT (Trial order can be discussed)

INSPECTION: SGS or equivalent inspection for Quality and Quantity of the commodity at loading place.
PAYMENT TERMS: PAYMENT 100% LC or SBLC

INCOTERMS: FOB/ CIF / CFR
DESTINATION PORT: Upon Buyer's interest (ASWP)

SPECIFICATION:

Various Grades (mainly 304, 201, 316)

QUANTITY:
A: Trial order: Monthly 300 MT (Buyer can request less quantity with intention)
B: Contract: Upon trial shipment ( Monthly up to 500 MT with 11 Months contract)

INSPECTION: SGS or equivalent inspection for Quality and Quantity of the commodity at loading place.

PAYMENT TERMS: 100% LC or SBLC

INCOTERMS: FOB/ CIF / CFR
DESTINATION PORT: Upon Buyer's interest (ASWP)

SPECIFICATION:

Scraps from industrial waste (detailed specification will be attached with FCO).

QUANTITY:
A: Trial order: Monthly 100 MT (Buyer can request less quantity with intention)
B: Contract: Upon trial shipment ( Monthly up to 1000 MT with 11 Months contract)

INSPECTION: SGS or equivalent inspection for Quality and Quantity of the commodity at loading place.

PAYMENT TERMS: 100% LC or SBLC

INCOTERMS: FOB/ CIF / CFR
DESTINATION PORT: Upon Buyer's interest (ASWP)

Purity: Cu 99.99%. Minimum Trial Quantity :- 500/MT. Payment Terms: SBLC/MT760, Irrevocable, Confirmed, Transferable. Origin :- Zambia. Price :- LME Discount % . Delivery: Zambia /Durban Bonded Warehouse.

Origin: Mexico * Price: CIF * Payment terms: 100% LC Mt700 Transferable * Performance Bond: 2% * Weight: 25kg * Al (Min): 99.7 * Model Number: AL99.7% * Packaging Details: 25Kg /Ingot, Packed in wooden case, Net weight 1000Kg/ Case, or as customers requirements

Copper Cathodes Origin DRC Africa, secure supply up to 20,000MT /mth at mkt price

Aluminium Ingots

Copper wires (Millberrry).

Quantity Grade A: 5MT
Price: 95% x LME

Quantity Grade B: 6MT
Price: 90% x LME

Available quantity: 85 MT

Composition: 89% Al, 10% Si, 1% others

Test report analysis for every batch is available upon request

Iron Ore mines operation in Indonesia mostly operating in Kalimantan, Sumatera, Sulawesi and Papua with an annual production of iron ore averagely around 5
mil. tons per year.

Steel billets of Saudi origin. Supplied from SABIC.
Prices are as follows:
300 thousand tons =$360/MT
400 thousand tons = $335/MT
500 thousand tons = $320/MT
700 thousand tons = $300/MT
900 thousand tons = $270/MT
One million or more = $230/MT

Product Description -
MTL file is available and All lengths are available

Price of product (USD) -
1 million ton is 375 usd per mt CIF price.

Product origin -
SABIC steel of Saudi origin

Key Specifications/Special Features -
MTL file is available and All lengths are available

Minimum Order Size and Packaging details -
Minimun order quantity (MOQ) is one (1) million tons

Product Description -
We have full detail SGS inspection of the goods and laboratory analysis

Price of product (USD) -
30% less than the international stock exchange market.

Product origin -
Russian origin

Key Specifications/Special Features -
We have full detail SGS inspection of the goods and laboratory analysis

Minimum Order Size and Packaging details -
Current available stock: 3 million tons only. The minimum order quantity (MOQ) is 1 million tons.

Rm hard drawn low carbon wire is made of cold drawing of wire rods. We produce sizes ranges from diameter 2.00mm to 9.80mm.

Sizes:
2.00mm ----------- 9.80mm

Weight:
200kgs ----------- 800kgs

Inside dia:
400mm ----------- 750mm

Tensile strength:
Min 500 n/mm2 ----------- 1050 n/mm2

Application:
Hard drawn low carbon wire can be used in variety range of general application
1) for galvanised wire coating
2) manufacture of steel fabric
3) nails manufacturing
4) basket, market trolleys, racks, chains, fasterners, fences.
5) bicycles manufacturing
6) steel wire for prestressed concrete product
7) others general industry applications

Magnesium (Alloy, Anodes, Extrusion, Rolling, Primary)
High purity magnesium, Magnesium ingot, Alloy chip, Alloy ingot, direct Chil cast Magnesium Billet, Magnesium-Rare Earth alloy, Magnesium-Lithium alloy, Extruded Anode, Casting Anode, packaged anode, Extruded Profile, Extruded Plate/Sheet, Extruded Rod/Bar, Extruded Tube, Extruded Wire, Extruded Formwork, Rolled Plate/Sheet, Rolled Strips, Die Casting, Dolomite.

Welded ERW Mild Steel Rectangular Hollow Sections. Various thickness & size available.
Size range:
Rectangular: 38x19mm ~ 150x250mm, Thickness 1.2~9.0mm.
Square: 19x19mm ~ 200x200mm, Thickness 1.2~9.0mm.
Length: 6M, 12M or as requested. Spec: BSEN10255 / BSEN10219 / ASTM A500 or equivalent / as per requested. Grade: S195T / L275 / S275J0H or equivalent / as per requested.

Note: Price is indicative only, please contact with us for further discussion on the final quotation.

Cold-rolled steel coil in various thickness, may request to slit to desired width or cut to desired sheet length.
Thickness 0.2~3mm
Width max 1220mm.
Specs: JIS G3141 or equivalent (Such as EN / ASTM / AS / NZS) / as per requested.
Grade: SPCC-SD, SPCC-1B, SPCD-SD or equivalent / as per requested.

Note: Price is indicative only, please contact with us for further discussion on the final quotation.

Hot-rolled steel coil in various thickness, may request to slit to desired width or cut to desired plate length.
Thickness 1.2mm~25.4mm.
Width max 2.428mtr, subject to thickness.
Specs: ASTM / JIS G3101 / JIS G 3131 / JIS G3132 / JIS G3113 / BSEN 10025 or equivalent / as per requested.
Grade: A36, A516, A588, A283, SS400, SS490, S275, S355, SPHC, SAPH or equivalent / as per requested.

Note: Price is indicative only, please contact with us for further discussion on the final quotation.

Welded ERW Galvanized Pipes or Galvanized Tubes in various thicknesses and size.
Size range: up to 10, Thickness 1.2~9.0mm.
Length: 6M, 12M or as requested.
Spec: BSEN10255 / BSEN10219 / ASTM A500 or equivalent / as per requested.
Grade: S195T / L275 / S275J0H or equivalent / as per requested.

Note: Price is indicative only, please contact with us for further discussion on the final quotation.

Steel mesh for concrete reinforcement manufactured from cold-worked reinforcement bar.
Size range: A142, A193, A252, A318, A393, A565 (A6~A12)
Width 2.2M x Length 6M or as per requested.
Specs: MS145 / SS561 or equivalent. Grade: B500A or equivalent.

Note: Price is indicative only, please contact with us for further discussion on the final quotation.

Welded ERW Mild Steel MS Pipe / ERW Pipes / Circular Hollow Section in various thickness & size.
Size range:'' ~ 10, Thickness 1.2~9.0mm. Length: 6M, 12M or as requested.
Spec: BSEN10255 / BSEN10219 / ASTM A500 or equivalent / as per requested.
Grade: S195T / L275 / S275J0H or equivalent / as per requested.

Note: Price is indicative only, please contact with us for further discussion on the final quotation.

Hot-rolled steel plates or steel sheets in various thickness and size.
Thickness 1.2mm~75mm. Max width 8ft. Max length 12192mm.
Standard size or customized size available for request.
Specs: ASTM / JIS G3101 / JIS G 3131 / JIS G3132 / JIS G3113 / BSEN 10025 or equivalent / as per requested.
Grade: A36, A516, A588, A283, SS400, SS490, S275, S355, SPHC, SAPH or equivalent / as per requested.

Note: Price is indicative only, please contact with us for further discussion on the final quotation.

Iron Ore

SPECIFICATION:

High Quality Heavy Melting Scrap (HMS 1& 2).
Composition: 80:20 (HMS 1:HMS 2)
ISRI CODE : 200-206
Free from radiation & explosive materials.
MINIMUM ORDER QUANTITY: 25,000 MT (Trial can be discussed).

INSPECTION: SGS or equivalent inspection for Quality and Quantity of the commodity at loading place.

PAYMENT TERMS: 100% LC or SBLC

INCOTERMS: FOB/ CIF / CFR
DESTINATION PORT: Upon Buyer's interest (ASWP)

1) Aluminium Ingots

SPECIFICATION: Various shape & Grades. Purity 96% - 99.7%
Aluminium Alloy Ingots (ADC12, AC4, AC2B, LM6, LM24)

2) Zinc Ingots

SPECIFICATION: Purity +/- 95% .Highly durable and good conductor of electricity.

3) Lead Ingots

SPECIFICATION: Purity +/- 99.94 to 99.99%.


QUANTITY:
A: Trial order: 1 container
B: Contract: Upon trial shipment (Monthly up to 10,000 MT with 11 Months contract)

INSPECTION: SGS or equivalent inspection for Quality and Quantity of the commodity at loading place.

PAYMENT TERMS: 100% LC or SBLC

INCOTERMS: FOB/ CIF / CFR / Cash & Carry
DESTINATION PORT: Upon Buyer's interest (ASWP)

SPECIFICATION:

Baled Aluminium Used Beverage Cans (detailed specification will be attached with FCO).

QUANTITY:
A: Trial order: 1 container
B: Contract: Upon trial shipment (Monthly up to 300 MT)
INSPECTION: SGS or equivalent inspection for Quality and Quantity of the commodity at loading place.

PAYMENT TERMS: TT and LC

INCOTERMS: FOB/ CIF / CFR
DESTINATION PORT: Upon Buyer's interest (ASWP)

Purity of Copper : CU Purity 99.99% min
Production Method : Copper Pyro Metallurgy
Dimension : 914mm x 914mm x 12 mm
Weight Of Each Sheet : 125 kg ( +, - 1% )
Weight Of Each Pallet : 2 MT ( +,- 1% )
Weight Of Each 20 Ft. Ctr : 20 MT appox

ZINC plays an important role in continuous hot-dip galvanizing. Using the correctly specified grade of ZINC, continuous galvanizing grade (CGG) alloy, or master alloy is key to producing a galvanized product.

ZINC Coatings on Steel
One of the biggest uses of ZINC is in making protective coatings for steel. The development of the wide range of ZINC coatings arose from two happy accidents of chemistry, the relatively slow and predictable rate of atmospheric corrosion of ZINC compared with steel, and the relative positions of ZINC and iron in the electrochemical series.

ZINC will corrode preferentially to give cathodic protection to iron when both are in contact in an aqueous medium. This is used to good effect to protect immersed structures such as ships’ hulls, drilling rigs and pipelines. It also means that any bare areas in a ZINC coating on steel, caused by damage or operations such as cutting or drilling, are still protected by the surrounding ZINC.

Other ZINC Coatings
Originally, ZINC coatings were applied by hot dip galvanizing. This involves dipping prepared steel in molten ZINC. This was done mainly with fabricated steel or with sheets of steel, many of which were profiled to produce the ubiquitous ‘corrugated iron’. The first development from this was the production of continuous strip steel with a galvanized coating. Refinements of this process today account for the greatest part of the total tonnage of steel carrying ZINC coatings.

Standard Specification for ZINC
Specifies the chemical requirements and other delivery conditions for 5 ZINC grades, including Special High Grade (SHG), High Grade (HG), and Prime Western Grade (PW). These grades, and scores of nonstandard variations of them, were once all that were available for use by the continuous galvanizing industry. Some are still employed in certain instances, e.g., SHG (99.990% Zn) is used to reduce the aluminum content in coating line zinc baths. The grades in this standard are also used in the general galvanizing and ZINC die-casting industries.

ZINC INGOTS
Application
Mainly used for die-casting alloy battery industry.
Widely used in Painting / Printing / Dyeing / pharmaceutical / rubber industry etc
Chemical industries, ZINC and other metal alloy plating coating industry.
In ZINC plating, manufacture of brass, manganese bronze, galvanized iron, dry battery; as catalyst and reducing agent.

Specifications
ZINC Ingot 99.995 High quality special high grade ZINC Ingots
Zn (purity): 98.7%-99.995%
Durability
Resistant to abrasion
Corrosion free
Impact resistance

Product Specification

Product Name: Primary Aluminum Ingot A7
Origin: Kazakhstan
Grade: A7
Purity: Minimum 99.70% Aluminum

Chemical Composition (Typical)
Aluminum (Al): 99.70%
Silicon (Si): 0.10 - 0.15%
Iron (Fe): 0.16 -0.20%
Copper (Cu): 0.01%
Zinc (Zn): 0.03 - 0.04%
Magnesium (Mg): 0.02%
Other impurities: 0.30% total

* In the field of constructions, steel acts as a powerful structure, which creates a high strength, durability and stability. Steel is an alloy of iron and carbon and sometimes other elements. It is a low cost and a significant component used in buildings, infrastructures, tools, machines, appliances, etc.

* Steel being the most preferred choice for construction has great benefits. The buildings are made up of different types of steel, which forms a structural framing system, saves time and less expensive

* Steel reinforcement bars or rebars are used to improve the tensile strength of the concrete.

* Steel is only used as rebar because elongation of steel due to high temperatures (thermal expansion coefficient) nearly equals to that of concrete

Types of Steel Reinforcement Bars
* Major types of steel bars used in the construction

I.Mild Steel Bar
* The surface of the mild steel bars are plain and round in shape. They are available in various sizes of 6 mm to 50 mm. They are used in concrete for special purposes, such as dowels at expansion joints, where bars must slide in a metal or paper sleeve, for contraction joints in roads and runways, and for column spirals. They are easy to cut and bend without damage.

Grades in mild steel bars
1. Mild Steel Bars
Mild steel bars grade-I designated as Fe 410-S or Grade 60.

Mild steel bars grade-II designated as Fe-410-o or Grade 40.

2. Medium Tensile Steel Bars designated as Fe- 540-w-ht or Grade 75.
II.Deformed Steel Bar
Deformed steel bars have ribs, lugs and indentation on the surface of the bar, which reduces the major problem that is faced by mild steel bar due to slippage and good bonding is achieved between concrete and rebar. The tensile properties is higher compared to other rebars. These bars are produced in sections from 6 mm to 50 mm dia.

1. TMT Bars (Thermo Mechanically Treated Bars)
Thermo Mechanically Treated Bars are hot treated bars that are high in strength used in reinforced cement concrete (RCC) work. It is the latest induction in the MS steel bars with superior properties such as strength, ductility, welding ability, bending ability and highest quality standards at international level.

Characteristics of TMT Rebars
Better ductility and malleability
High yield strength and toughness
More bonding strength
Earthquake resistance
Corrosion resistance
High thermal resistance
Economical and safe in use
No loss in strength at welded joints
Ordinary electrodes used for welding the joints
2. High Strength Deformed Bars
High strength deformed bars are cold twisted steel bars with lugs, ribs, projection or deformation on the surface. It the extensively and majorly used for reinforcement purposes in a construction. These bars are produced in sizes or sections from 4 mm to 50 mm in diameter.

Description: Raw crystalline sulphur in lump form used in fertilizer production, chemical processing, and soil amendment applications. It is ideal for further processing or direct industrial use.

Specifications: Sulphur content 99.5 %; moisture 0.5 %; irregular lump size (50-200 mm typical); bright yellow color; high purity; melting point ~115C; odor of natural sulphur; low ash content.

Note:

For price Quotation, please reach out to us Via email or WhatsApp, it will be our pleasure to work with you.

Description: High-purity elemental sulphur in granulated form used for fertilizer blending and soil conditioning. It improves crop yield by correcting sulphur deficiencies and supporting chlorophyll formation in plants.

Specifications: Sulphur content 99.5 %; moisture 0.5 %; particle size 2-4 mm; uniform yellow granules; insoluble in water; melting point ~115 C; suitable for agriculture and industry.

Note:

For price Quotation, Packaging size etc, please reach out to us Via email or WhatsApp, it will be our pleasure to work with you.

Buy Iron Ore From Top Suppliers
* Shree Trading and Services, are the top significant suppliers of Iron Ore in the domestic and international markets. We have years of experience in supplying the best quality of iron ore. This raw material has many advantages in the production of the steel manufacturing process.

* Iron ore is procured from nature in the form of rocks and other materials. Most of the iron ores contain high quantities of hematite and magnetite, as well as other types of iron minerals. With the use of advanced resources and modernized equipment, various levels of processing are incorporated for the delivery of Iron Ore suitable for steel manufacturing companies. The raw material of the iron is suitable to make pig iron, which is one of the essential raw materials used to make steel.

Best Quality Iron Ore
* At Shree Trading and Services, we have emerged as one of the most renowned suppliers of highly reliable and durable iron to various destinations. Iron ore obtain is matched according to the specifications of the market and compliance with the international quality standards. We ensure that the chemical properties of the iron ore are stringently tested to ensure that the material is usable in the manufacturing of different applications. The iron ore is available in different grades ranging from 50% to above 65% of the iron (Fe) content.

Iron Ore Transportation
* We offer to different destinations through vessel chartering freight. Iron ore is usually supplied in bulk in big carriers or as per the customer requirements. We are highly capable of shipping thousands of metric tonnes of Iron Ore and in the most efficient manner as per the shipping terms.

Technical Specifications:
Name Description
Product Name - Iron Ore
Type - Iron Ore Fines or Lumps
Material- Iron Ore Mineral
Color - Red, Brown, Black
Grade - All Grades
Form - Fines or Lumps
Packaging Type - Jumbo Bags or Loose Cargo as per Customer Requirement

Specification: High Purity Grade A 99.9% to 99.99% scrap copper wire with diameter of 0.30mm, 0.25mm,0.20mm.
Clean (free from any insulation), uncoated, untinned, unalloyed copper wire, brittle, & free of burnt.

Chemical Composition:
Element: (%)
Copper : 99.90% min
Lead: 0.005% Max
Bismuth: 0.03% Max
Carbon: 0.03% Max
Iron: 0.005% Max
Zinc: 0.003%
Cobalt: <0.001%
Phosphorus: <0.01%
Sulphur: <0.01%
Total impurities: 0.03% Max

QUANTITY:
A: Trial order: Monthly 100 MT (Buyer can request less quantity with intention)
B: Contract: Upon trial shipment ( Monthly up to 1000 MT with 11 Months contract)

INSPECTION: SGS or equivalent inspection for Quality and Quantity of the commodity at loading place.

PAYMENT TERMS: 100% LC or SBLC

INCOTERMS: FOB/ CIF / CFR

DESTINATION PORT: Upon Buyer's interest (ASWP)

Product Description -
Base Aluminum P1020, Purity% 99,97 until 99,99%

Price of product (USD) -
"Russian Aluminum ingots:
Annual contracts for quantities
100,000 tons at a price of $ 1,590 per tonne cif
3000 tons at $ 1900 cif.

Saudi Aluminum ingots:
5 thousand tons at $ 1,866 per ton, cif price.
Large quantities are priced at $ 1733.

The higher the quantity, the lower the price.
Seller requires solvency with the loi letter. "

Product origin -
Russian / Saudi ingots aluminum

Key Specifications/Special Features -
Base Aluminum p1020, Purity% 99,97 until 99,99%

Minimum Order Size and Packaging details -
"Russian Aluminum ingots:
Minimum order quantity is 3000 tons

Saudi Aluminum ingots:
Minimum quantity of 5 thousand tons"

Product Description -
Full details of the product will be provided to the buyer

Price of product (USD) -
"Annual contracts for quantities of 240,000 tons: the price is $ 5230/ton (CIF to all ports)
Minimum order quantity (MOQ) is 500 tons"

Product origin -
Russian origin

Key Specifications/Special Features -
Shipping to any port around the world

Minimum Order Size and Packaging details -
Minimum order quantity is 500 tons

Laira Group specializes in the supply and export of highly demand Iron Ore. We may promote wide order quantities of Iron ore lumps.

We can offer a high level of service in shipping Iron Ore (Hematite) to our customers at a great quality and fair price because of our devoted employees and extensive expertise in this sector. If you are more interested in product information or need to place an order contact or inquire our Sales team.

Our company can supply a varieties of copper piping, copper bar, plate , strip and even rivets to name a few. Material wise we are able to cater for copper, brass, copper nickel, nickel silver and also stainless steel.

â?¢ Total Iron (TFe): 64.37% (Min 62.00% specification)
â?¢ Ferrous Oxide (FeO): 14.50%
â?¢ Silica (SiOâ??): 5.18%
â?¢ Alumina (Alâ??Oâ??): 1.93% (Max 2.50% specification)
â?¢ Moisture: 8.32% (Max 10.00% specification)
â?¢ Phosphorus (P): 0.0068% (Max 0.10% specification)
â?¢ Sulfur (S): 0.2051% (Max 0.40% specification)
â?¢ Loss on Ignition (LOI): 0.06%
â?¢ Other Elements: CaO: 0.293%, MgO: 0.4698%, MnO: 0.1116%, TiOâ??: 0.1307%

Car engine block scrap.

Die cast , machining , stamping.

Iron scrap.

Aluminium wire scrap.

Aluminium ingot.

Aluminium scrap.

Copper wire scrap.