Find Verified Magazine Stands Suppliers, Manufacturers and Wholesalers

MJRS-1 Hydraulic Mill Roll Stand

1) The sturcture is double rotary shafts with four arms; Support two paper mill rolls on both arms at the same time.

2) Hydraulic control for paper mill roller up-down, clamp-open and centering. Or motorized clamp-open and centering.

3) Using multi-point brake which imports from Italy and automatic expansion springiness chucks , Reduce paper waste.

4) Effective width:1400mm-2800mm.

5) Maximum paper roll diameter:¦Õ1500mm.

6) Maximum support weight: 7T.

7) Main axis:¦Õ270mm





HS CODE: 844180900

Polyester Flag

flag

polyester flags,
90*150cm
with or without metal hole
with your logo and design on

MJSGL-2 Single Facer Line

(2-layer corrugated paperboard production line)

(2-ply corrugated paperboard line)

Roll Stand Single Facer Paperboard Cutter

Note: For the Single Facer line, we can produce different model roll stand, single facer, and paper cutter as customer's requirements.


Introduction:
Single facer line is also called 2-layer corrugated paperboard production line. This Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.

Technological Parameter:

Working Width
1400mm
1600mm
1800mm
2000mm

Heating method
Electrical heating/Oil heating / Steam heating

Design speed
40-70m/min

Economical speed
30-60 m/min

Compress-air pressure
0.4-0.9MPa

Flute type
Standard flute
UV Flute

Standard spec.
A,B,C,E,F

MJT model 3-Layer Corrugated Paperboard production Line
Introduction
Corrugated cardboard production line includes mill roll stand, single facer, pre-heater, conveyer bridge, gluing machine, slitter scorer machine, cut off machine and stacker. We can produce the three ply, five ply and seven ply corrugated cardboard production line, Widths from 1400 to 2500mm\min,production speeds from 60 to 250 meters/min Customer's can choose according his own needs. We can provide a complete production line and can also provide individual parts to complete customer's own line.

Equipments List

Equipments Name
MJT-60-1600

Economical
MJT-80-1600

Standard
MJT-100-1600

High-speed

Mechanical Roll Stand (include the paper roll rail.)
2
2


Hydraulic Roll Stand (include the paper roll rail.)


3

Pre-heater (diameter 400mm)(Up)
1
2


Pre-heater (diameter 600mm)(Ground)


2

Vacuum Single Facer (Roll 280), gimbal drive
1
1


Vacuum Single Facer (Roll 320), gimbal drive


1

Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.)
1
1


Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.)


1

Double preheater (diameter 400mm)
1
1


Double preheater (diameter 600mm)


1

Double Gluer - A
1
1


Double Gluer - B


1

Double baker (600mm X9heat plates, 4.5meter cooling part.)
1



Double baker (600mm X11heat plates, 5meter cooling part.)

1


Double baker (600mm X14heat plates, 6meter cooling part.)


1

Thin Blade (Simple electrical adjust.)
1



High-Speed Thin Blade(Electrical up and down, electrical adjust the precision.)

1
1

Mechanical Cutter
1



NC Cutter (Servo, straight knife.)

1
1

Conveyor and Stacker

1


Paperboard booking machine


1

Glue system
1
1
1

Steam system (not include the boiler and pipes.)
1
1
1

MJSF-320FX Single Facer

Introduction:

Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.

Characteristics:
* Paper leading with Vacuum absorb model, have high-pressure & strong fan motor. The flow of fan can be adjusted, and have silencer; The electric control system fastens on a electrical case, which has min. 1.5meter distance from equipments, the operation side is completely independent.

* Gimble drive system, separated structure and independent drive case. Closed gear drive system with oiling lubrication, the usage life of the gears is highly prolonged.

* Machine base and wallboard is cast iron structure, thickness of the wallboard is 180mm.

* Corrugated Roll: Material of corrugated roll is 52CrMo alloy, which is dealt with quench, surface polish. Diameter of roll is Ø 320mm, surface hardness is more than HRC60. The adjust of up and down of roll is pneumatic controlled.

* Press roll: Diameter is Ø320mm, surface is worn down and chromeplated. The adjust of up and down of roll is pneumatic controlled, material is Carbon Iron 45#, dealt with confection.

* Pre-heater Roll: Diameter is Ø400mm, surface is worn down and chromeplated. All are connect with soft metal pipe.

* The bearing of corrugated roll and press roll are lubricated and high-temperature resistant.

* Glue supply and quit is pneumatic controlled, diameter of glue roll is Ø240mm, surface of roll has concave netted rind, surface polish & chromeplated. Surface of adjust roll is surface polish & chromeplated.

* Use electrical glue separate equipments, the glue part can run independently when the main motor stops, this can avoid the dry of the glue.(Choose by customer.)

* Middle height of corrugated roll is 0.10mm, middle height of press roll is 0.075mm. Have place limit equipment, diameter of tighten cylinder is Ø160mm.





Technological Parameters:

1. Working width: 1600mm, 1800mm, 2000mm,2200mm.

2. Design speed: 120m/min.

3. Operation direction: Left or right (design as customer’s workshop.)

4. Gas: 0.4-0.9Mpa.

5. Steam pressure: 0.8-1.3Mpa.

6. Flute: UV or UVV model, can design as customer’s requirement.



Diameter of the rolls:

1. Corrugated Roll: Ø320 mm

2. Press Roll: Ø320 mm

3. Gluing Roll: Ø240 mm

4. Pre-heating Roll: Ø400 mm



Drive Power:

1) Main Motor: 11KW, 380V, 50HZ

2) Fan Motor: 15KW, 380V, 50HZ

MJRY-2 Creasing and Die-cutting Machine (With Inverter For adjust the speed)

It is a kind of special equipment for all assortments of common card boards, corrugated boards, plastic sheets, leather products. It is suitable for printing, packing, decorating, plastic industries etc. with the features of firm structure, exquisite marking, greet cutting, high precision, ease of operation, safety and reliability etc. This Series Creasing and Die-cutting machine use Inverter to adjust the speed.

MJZXJ-1 Automatic Folder and Gluer

1. Introduction of the machine:

MJZXJ-1 automatic fold gluer consist of three parts which is feeding paper part, gluing & folding part and counting piling part, with PLC and colorful touch screen to adjust the speed, to adjust the width of carton. with easy-faster-precise-faithful controlling style, automatic feeding paper, automatic gluing and folding, automatic counting, automatic piling and output the carton, average working speed is 150pcs/min,max speed is 220pcs/min.High efficiency, save energy, enviromental is our top pursuit.

1) PLC is Delta brand made in Taiwan.

2) Colorful touch screen is Hitech brand made in Taiwan.

3) All the motor is Taiwan brand.

4) The electric part such like contactor, relay, button, knobs adopt Telemecanique brand.

5) The belt for vacuum and for transmission is Italy brand.



2. Function and characteristics:

1) Automatically finish the top folding and middle folding, meanwhile finish the glue belt stick of the upper and down part, save labor and time.

2) suitable range is wide, can be used in different size of carton, quick and convenient to adjust.

3) The machine work steady and reliable, the pasting quality is firm and high precision.

4) Easy to operate and to maintain

5) Automatic amend the carton right-angle degree.



3.Main technique parameter.

1) Max. corrugate paperboard size:1200¡Á2200mm

2) Min. corrugate paperboard size:260¡Á600mm.

3) Power:8 kw



4.Introduction of each parts





1) Folding part

The first folding line is 180 degree, the third folding line is 135 degree





2) Automatic amending part:

Automatic amending, make the carton with the most exactly form after pasting.



3) Counting and piling part:

The finished product quantity can be counted and with good pilling, can setting the quantity of the out carton, and after pasting, the carton can be come out accord the setting number. The speed can be adjusted, can be controlled separately, the piling speed is 220m/min.



4) Control gauge part:

With PLC and colorful touch screen, and adjust production speed and data-input while the machine is running, many change function of the screen.
Also the carton width adjustment by this PLC and touch screen, input size, automatic adjust.

MJSF-380D Single Facer (Double Flute)

Purpose and Characteristics:

1) Design speed:200m/min

2) Effective width of machine: 1400mm-2500mm

3) Main flute roller diameter¦Õ380mm, pressure roller diameter¦Õ385mm, preheater roller diameter¦Õ400mm.

4) Vacuum suction paper leading features perfect flute formation

5) Dual flute structure, one pair flute rollers unit working and another preheating, achieve flute quickly change. Save working space ( if normal single facer machine need two sets to achieve this function ).

6) PLC control system. Touch screen display all running data, easy for operation.

7) The flute rollers made by special alloy steel with hardness treatment . it' hardness can reach HRC58-60, The surface is well treated by grind and plated chrome, or adopt Tungsten carbide flute rollers are optional.

8) The independent driving box, five driver axis, all gears with hardness treatment, oil spray lubricating by oil pump to reduce noise keep running stable, prolong the use life of gear.

9) Adopt Glue width motorized dividing to match the paper width. Idle running motor for glue applicator roll to avoid glue dry. Adjustment for gap between glue roller and doctor roller by electric . Digital read out for the gap between glue roll and doctor roll. Glue unit can be moved by pneumatic.

10) Flute rollers and pressure roller controlled by hydraulic system, working pressure stable.

11) With water spray device for adjust moisture capacity of flute paper.

12) This dual flute machine suit for single facer paperboard production line ---2 layer (Single facer paperboard ) and corrugated paperboard production line--- 3 & 5 &7 layer. With high market competitive power.

MJBD-2 Thin Blade

(Paperboard Slitter and Scorer)

Introduction

The Thin Blade (Paperboard slitting and pressing line machines) produced by our company is good appearance, good structure, with good design, easy to operation, easy to maintenance, and with competitive price.

The paperboard slitting and pressing machine use thin blade to cutting, the edge of the knives are very sharp, this makes the paperboard after cutting are very good edge, this improves the appearance and quality of the paperboard. Make the paperboard easier for entering printer machine, and improves the quality of the carton. The design of this machine use pressing and pulling paperboard with double wheels, can change wheels base. This means the machines can press and slitting, also can pull paper in front and back, can slitting stably. This is perfect machines for manufacturers of cartons.

Technological Parameters

Model
MJBD-2-1800
MJBD-2-2000
MJBD-2-2200
MJBD-2-2400

Max paperboard size (mm)
1700
1900
2100
2300

Max mechanical speed
100pcs/min
100pcs/min
100pcs/min
100pcs/min

Blade knives
4 knives
4 knives
4 knives
4 knives

Presslines
6 pairs
6 pairs
6 pairs
6 pairs

Min slitting width (mm)
130
130
130
130

Min pressing width (mm)
30
30
30
30

Outer diameter of the thin blade
220mm or 200mm
220mm or 200mm
220mm or 200mm
220mm or 200mm

Thickness of the thin blade
1.2mm(steel), 1.4mm (alloy)
1.2mm(steel), 1.4mm (alloy)
1.2mm(steel), 1.4mm (alloy)
1.2mm(steel), 1.4mm (alloy)

Power
4.0KW
4.0KW
4.0KW
4.0KW

Pneumatic pressure
<0.4mpa
<0.4mpa
<0.4mpa
<0.4mpa

Machine size (mm)
2400¡Á1600¡Á1500
2600¡Á1600¡Á1500
3000¡Á1600¡Á1500
3200¡Á1600¡Á1500

Machine Weight (kg)
1250
1550
1950
2500






Note: For both of above types Thin Blade, you can choose the quantity of knives and press lines. For the sizes, we can make as customer¡¯s requirement.

Right-angle Conveyor and Stacker

Charateristics:

* Automatically stack and collect the paperboard.

* Pneumatic control the transversely output of paperboard, electrical ouput.

* Vertical paperboard collecting use width belt for transportation.

* When the paperboard stack to required height, the paperboard is output by switch controlled.

Technological Parameters:

1.Speed: 60-80m/min.

2. Working width:1600mm.

3. Max. Length of paperboard: 2400 mm.

4. Max.Height of paperboard: 200 mm.

5. Gas: 0.4—0.9Mpa.

6. Steam Pressure: 0.8—1.3Mpa.

7. Operation direction: Left or right (design as customer’s workshop.)



Diameter of the rolls:

1. Belt roll: Ø86mm, Surface of roll is chromeplated and polished.

2.Transversely output roll: Ø124mm Surface of roll is chromeplated and polished.



Drive Power:

Main transport motor: 0.75KW 380V 50HZ

Transversely output motor: 0.55KW 380V 50HZ

Running power: 0.55KW 380V 50HZ



Main outsourcing parts, materials and origin

Name
Brand & Origin
Material

Motor
Jiangsu Deyi


Electrical elements
Delixi, Chint


Pneumatic elements
Tian Ao


Proximate Matter
Tangshan
10#,12# Channel steel

Transport belt
Own city


Bearing
Shenzhen HWL or Wanxiang


Sealmaster
Anhui Qianshan, Wanshan brand

MJNC-3 Automatic Double NC cutoff

1. Features

AC servo cutting system

Automatic synchronization of cardboard¡¯s speed; fixed length cut ¨Coff as its basic function; Automatic order change; Italian branded permanent magnet synchronous AC servo motor and German branded servo controller adopted for high efficiency and precision cutoff.

Optional color mark tracking system is used if preprinted liner paper is put into production.

VF control of feed-in and feed-out

Variable frequency motor and inverter control used for cardboards¡¯ feed-in and feed-out on this machine. Timing belt transmission; PU wheels used for cardboard pressing at feeding; Automatic synchronization of conveying speed and cardboard real speed.

Touch-screen monitor

Standard 5.7 touch-screen monitor and friendly HMI on operator console is used for on-site operating.

Superior working conditions

Individual sealed control cabinet; equipped with industrial air-conditioning system; Dust-free, constant temperature and humidity working conditions ensures longer life-span of electrical components.

Stability and reliability

High-quality raw materials, strict heat treatment, high-precision mechanical processing, ensures stable operation of equipment on the long run.

Use of international branded electrical, pneumatic components, standard parts, ensures high reliability and long service life.

High automation

High-automatic running and control, improve the efficiency, save labors, and reduce labor intensity

CE approval.

Our products are designed and constructed strictly according to CE standards and have obtained CE approval via SGS.

2. Technical specifications

Max. Speed
150,200,250m/min

Effective width
1800,2200,2500mm

Cutting precision
¡À1mm

Cutting length
500~9999mm

MJBL-6 Series 3-color big roll Flexo printer

Function and Characteristics

1) The operating panel own double control function from full-face and lateral, special lateral control panel designed personality, it is very convenient and fast.

2) Choose dimensional design, reduce arched cardboard printing error and cardboard shift during the machinery running.

3) Adopt pneumatic locking and motorized detachment.

4) The working method of ink printing plate, pneumatic uplift printing plate, pneumatic uplife ink well, unattached electrical machinery running, cannot stop the ink when stop device, automatic ink equably.

5) Printing plate roller 360 regulation electrical phasing adjustment. (You can also choose CPU digital display phase adjustment function).

6) 45# steel high frequency heat treatment for gear running whole machinery, exact color and last well.



Main Technical parameter

Model number
Roller diameter
Over the

paper width
Area of

valid printing
Electrical

power

MJBL-6-1600
695
1800
2100¡Á1600
5.5

MJBL-6-1600
800
1800
2450¡Á1600
5.5

MJBL-6-1800
800
2000
2450¡Á1800
7.5

MJBL-6-2000
800
2200
2450¡Á2000
7.5

MJBL-6-1800
908
2000
2800¡Á1800
10

MJBL-6-2000
908
2200
2800¡Á2000
10

MJRJ-5 Series Die-cutting and Creasing Machine 1600-1800

Introduction
MJRJ-5 Series Die-Cutting and Creasing Machine is the special equipment for die cutting and creasing many different kind sheet shape materials. Such as hard paperboard, corrugated paperboard, plastic, leather and so on. It is widely used in printing, packing and decorating industry. Our companie¡¯s product with its high-quality and competitive price are popular by our customers all over the world.

Characteristics

1. Sliding bearings are made of high quality alloy cooper, thus to get effect of anti-friction and shake reducing.

2. Flywheel is with big moment of force and large pressure.

3. High strength due to one piece casting by using top-ranking material for machine body.

4. Single plate electromagnetic clutch is sensitive and reliable.

5. Have functions of single cutting and creasing, continuous cutting and creasing and time-lapse opening, time-lapse range is adjustable.

6. Operation height is reasonable designed, the opening corner of the moving-bed is big.

7. Focus lubrication system makes the machine can lubricate very well, and reduce the abrasion.

8. Safety system is reliable.



Technological Parameters

Model
MJRJ-5-1600
MJRJ-5-1800

Max. die-cutting and creasing area
1600*1250mm
1800*1400mm

Working speed
16¡À2 strokes/min
16¡À2 strokes /min

Max. Rule length
<50m
<62m

Power
11kw
11kw

Weight
11500kg
13500kg

Machine Size (L*W*H)
2170*2560*2230mm
2240*2800*2130mm

MJTJ-3-750, 930, 1040, 1100, 1200 Hot Stamping and Cutting Machine

The series of model TYMB gilding, cutting & mark pressurized machine is product of new generation with clockwork precision and marked effect. It is used for gilding-printing all kinds of colored electro-chemical aluminum, marking a concave-convex die-cutting pictures, trade mark, advertisement of sample, boxes, cover of books and new year card, highly decorations and printing materials. It is the optimum equipment for printing, packing, decoration and plastic industries with materials including paper, cardboard, plastic, leather matters.

Characteristics
It adopts high quality material and high tension of casting

It adopts four-shaft bevel wheel structure with steady operation, great cutting, low noise.

Sound and layout of its height, great angle of frame.

Electrical system is designed according to IEC standard.

It has three functions for single slitting, successive slitting, time delay. Its can be adjusted.

Safety protection system is reliable.

Concentrated lubricating system.



Main Specification

Model
Max.Platen Working Area
Max.Gilding Printing Area
Skip Order Range
Working Pressure
Foil-delivered Length
Foil-delivered Group
Working Speed
Main Motor
Overall Power
Overall Dimensions
Total Weight

TYMB750
750*520mm
740*510mm
Built-in Processing With Computer
100T
500mm
2groups
1380Time/h
2.2kw
10kw
2150*1400*1900mm
2500kg

TYMB930
930*670mm
920*660mm
Built-in Processing With Computer
170T
640mm
3groups
1320Time/h
4kw
13kw
2200*2000*1950mm
3500kg

TYMB1040
1020*700mm
1020*700mm
Built-in Processing With Computer
170T
700mm
3groups
1320Time/h
4kw
13kw
2230*2100*2000mm
4500kg

TYMB1100
1080*780mm
1080*780mm
Built-in Processing With Computer
220T
800mm
3groups
1200Time/h
5.5kw
19kw
2250*2200*2000mm
5000kg

TYMB1200
1180*800mm
1180*800mm
Built-in Processing With Computer
220T
800mm
3groups.

MJKC-1 Series Paperboard Cutting, Pressing Line, Slotting & Cutting corner Machine

Introduction
MJKC-1 Series Paperboard Cutting, Pressing Line, Slotting & Cutting corner Machine is and integrated machine used for the cutting, slotting, pressing line and corner cutting of corrugated paperboard. Its special characteristics are high production efficiency, good quality and easy operation. (We can also add the function of holing and carton window on this machine.)

Technological Parameters

Model
Max. Paperboard size (mm)
Min. Paperboard size (mm)
Slotting Depth (mm)
Work Speed (m/min)

MJKC-1-1800
1750¡Á1470
650¡Á350
500
0-80

MJKC-1-2000
1950¡Á1470
650¡Á350
500
0-80

MJKC-1-2200
2150¡Á1470
650¡Á350
650
0-80

MJKC-1-2400
2350¡Á1470
650¡Á350
650
0-80

MJKC-1-2600
2550¡Á1470
650¡Á350
650
0-80

MJMQ-3 Rotatory Die-Cutting Machine

(Chain model)

Front Photo Back and side Photo

Introduction
MJMQ-3 Series Rotatory Die-cutting Machine is driven by chain. It is used for die-cutting corrugated paperboard and different kind atypic packages. The advantage of the machine is high efficiency, power save, good safety and so on. This machine use PU roller cover which is imported from Taiwan, the usage life is more than 10million times. The machine has the function of automatically line-speed compensation, this function makes the die-cutting size of the paperboard is exactly right even when the roller cover is attrited. The renovate structure 3times prolongs the life of the roller cover. The feeding system use chain transport. The operation and usage is very easy.


Die-cutting part:
1) The roller uses high-grade steel, surface is abrasive with hard chromeplated.

2) Automatically revise the parallel, running stably.

3) Use PU roller cover which is imported from Taiwan.

4) The rubber roller have transverse 50mm moving system.

5) Automatic compensation of the line-speed means: the automatic compensation structure makes each batch carton size same after die-cutting without worker¡¯s operation.

6)The roller cover can automatically rehab, this prolongs the use life of the roller.





Technological Parameters

Model
Max. Paperboard size(mm)
Min. Paperboard size(mm)
Thickness(mm)
Main Power(kw)

MJMQ-3-1600B
1600¡Á1350
300¡Á500
1-8(3-5layer)
4.0

MJMQ-3-1800B
1800¡Á1350
300¡Á600
1-8(3-5 layer)
5.5

MJMQ-3-2000B
2000¡Á1600
400¡Á600
1-8(3-5 layer)
7.5

MJMQ-3-2400B
2400¡Á1600
400¡Á700
1-10(3-7 layer)
7.5

MJZX-2 Semi-auto Carton Gluer Machine

Introduction:
Semi-auto Carton Gluer Machine is new machine for carton production in recent years. It is mainly used for the glue of the carton. It can glue for 3-layer, 5-layer, 7-layer paperboard and so on. The machine structure is easy, working is stable, operation is simple, production efficiency is high, gluing quality is good, production cost is very low. The cost is 15times lower than steel wire stitcher machine.

Machine structure: Machine frame, up and down working-table, front transport equipment, front revising equipment, middle transport equipment, middle press equipment, finished product side output equipment, electrical control equipment.

Characteristics:
Easy and reliable operation system.
Novel design of the whole machine.
High-speed changing sizes.
Automatically counting and strap setting.


Technological Parameters:

Model
MJZXJ-2

Max. Size (L+W)*2
2460mm

Min. Size (L+W)*2
340mm

Max. Size (W+H)*2
1515mm

Min. Size (W+H)*2
240mm

Paperboard feeding height
900mm

Power
2.2kw

Mechanical Speed
40m/min

Machine Packing Size
4.5*1.95*2.0m

Machine Weight
2000KG


Note: We can produce different size machine as customer¡¯s requirements.

MJBZQ-2 Automatic Flute Laminating Machine
This machine adopts automatic feeding for bottom paper, more personalized design, more convenient feeding. It can be used for lamination between cardboard to cardboard, cardboard to corrugated board. This machine has the advantages of simple operation, convenient maintenance, high speed, low noise and high precision etc.

Characteristics:
1. Top sheet forwarded by feeder on high table is designed, the sheet can be piled up to 1.5m

2. Bottom sheet is automatically fed, The two sheets are plied freely, high efficiency

3. The machine is controlled by PLC which made feeding process smoother and more accurate

4. Flexible front positioning can avoid bottom sheet exceeding the top sheet and adjust back and forth lamination of paperboard to bottom paperboard(above 350g/m2),and to A/B/C/D/E flute corrugated cardboard

5. Automatic pasting mechanism to economize the economzie the paste consumption.



Main Technological Parameters



Model
Max.sheet size
Min.sheet size
Total power
Speed
Weight
Measurement

MJBZQ-2-1100E
1100¡Á1100mm
350¡Á350mm
9kw
0-90m/min
3500kg
8700¡Á1900¡Á2400mm

MJBZQ-2-1300E
1300¡Á1100mm
350¡Á350mm
9kw
0-90m/min
4500kg
8700¡Á2000¡Á2400mm

MJBZQ-2-1450E
1450¡Á1100mm
350¡Á350mm
10kw
0-90m/min
5000kg
8700¡Á2100¡Á2400mm

MJSD-2 Paperboard Cutter Machine (Light model)

Introduction
MJSD-2 Series Rotary Die-Cutting Machine (Light model) is used for the transverse and vertical cutting of the paperboard as customer¡¯s requirement. The machine use chain model drive, have big turning moment. The machine has reasonable structure, the cutting precision is high and adjust is fast.

The machine is electromagnetism speed adjust, continuous feeding, mechanical control, it can work together with the single facer machine as single facer line for producing the 2-layer corrugated paperboard.
The knives quantity can be required by the customer.
Transversely cut 400-2400mm.

Technological Parameters
Model
MJSD-2-1700
MJSD-2-2000

Max. Cutting width.
1700mm
2000mm

Cutting length
200-2000mm
200-2000mm

Cutting times
20-120times/min
20-120times/min

Cutting thickness
2mm
2mm

Power
3kw
3kw

Working Speed
0-70m/min
0-70m/min

Machine Size
2250*1400*1300mm
2750*1400*1300mm

Weight
About 1500kg
About 1700kg

MJDX-2 Stitcher (Stapler)

Introduction:
MJDX-2 Stitcher (Stapler), the head of the machine is made with electromagnetic clutch and electromagnetic arrester. The machine has advantages as working reaction speed is high, low noise and so on. The carton stapler is the special equipment for nailing the corrugated paper carton and paper box with double-feed device. It can nail double line oblique according to 45degree at the same time and nail the big and middle size paper case continuously or interruptedly.

Sizes available: 600mm, 900mm, 1200mm, 1400mm, 1600mm, 1800mm.

Technological parameters:
Main technological Parameters:

Model
MJDX-2

Speed
400 stitcher/min.

Working thickness
3-ply, 5-ply paperboard

Stitch type
45¡ã double lean-nail

Width of stitch feet
13mm

Size of stitch wire
17#

Operation table height
1.2m

Motor power
0.55KW

Machine Weight
650kg

Engine stand: we produce engine stands from 750lbs to 2000lbs. Pls contact us for details if you are interested.

Features
- Sturdy design prevents these engine stands from tipping while holding the block.
- Front swivel casters allow you to move and position engine exactly where you need it.
- Four adjustable arms and 360 rotation for easy mounting.
- Capacity from 750LBS to 2000LBS.

Usage
- Rugged steel construction, ideal for auto and truck repairs.

high-quality powder coating in black
The main tube of SQUAT STAND:50*50*1.5,45*45*1.5
The main tube of gym bench:50*50*1.5
steel construction
material profilel 5 x 5 cm
shelf stand/rack
free adjustable width
the shelf is height-adjustable in 16 positions (65-165cm)
adjustable back + seating position
incline, flat bench, decline bench
upholstery with leatherette, thickness 5cm
rubber puff end caps
max. weight capacity: 200kg
dimension rack LxWxH: 51 x 58 x91-165 cm
N.W./G.W.: 17/18kgs
dimension bench L x W xH: 110 x 52 x 115cm
N.W./G.W.: 14/15kgs
seat height: 46cm
Packing size Rack: 101 x 45 x 15cm
Packing size Bench: 111 x 42 x 17cm

CARTON SIZE: 56.5X56.X12.5 CM
NET WEIGHT: 17KG
GROSS WEIGHT:18KG
M.O.Q.: 1x20'GP
PRODUCTION LEAD TIME
will be 20 days upon receiving the deposit and all the detailed information confirmed for the order
CONTAINER
655pcs/20'GP; 1310 pcs/40'GP; 1590pcs/40'HQ

Model: 1107A
Max Pipe Capacity:12"
Height Adjustable Capacity:71-131 CM Max Load-bearing Weight:1130KGS
Gross/Net Weight:14.3/13.3 KGS Packing Size:80*25*20 CM

Data Sheet------
Model: A100 High Security Anti Theft Alarm Stand
Specifications : Height:11 cm , Charge current:2A , Color: White , alarm volume: 100db

Competitive Advantage------
1/It will be powered off when pick up mobile phone, and charge when back to the base
2/Unique built-in steel cable, anti cutting and strong
3/Mounted by screw and adhesive tape
4/Alarming port for protecting accessories (speaker, headphone, smart wearable, etc)
5/4 Arms Bracket with Higher Security
6/Charge cable is locked by metal cover

High Quality Anti-theft Alarm Stand for Cellphones



Features

1. Secure, charge different cellphones, tablets

2. Charge Alarm function

3. Sensor head locked to the base by screw to avoid false disconnection

4. Simple to Use, Attractive Display

5. Protect both cellphone, and accessory(headphone, speaker) at the same time

ZG-D6CMH Alarming Camera Display Stands With alarm function, this ZG-D6CMH is mainly designed for High-Theft Solutions of open merchandises such as SLR or camera or camcorder, and etc..

Secure & neat displays of these merchandises, interactions between consumers and merchandises are also realized with this product. And thus better promote sales of open merchandises.

Technical parameters:

1) With alarm function
2) 13cm (standard) or customize
3) Aluminous stand, Metal stand, Remote control. When the exhibit is separate from the sensor, or the sensor is separate from the stand, or the sensor is cut, or the stand is separate from the table, it will alarm immediately.
4) Retractor (pull box) inside the stand
5) Inbuilt battery type: 3.6V/ER14250
6) Exterior power adapter: DC-6V
7) Maximum battery standby: 1 year
8) Alarm volume: 85-105DB
9) Alarm indication: red LED light twinkling
10) Tamper indication: green LED light twinkling
11) Low battery indication: red LED twinkling with a "beep" given
12) Turn on / off alarm: sound & light indication
13) Alarm switch: Remote control.
14) Adhesive base: T-shaped metal mounting base.
(If required, please make statement before ordering)
15) Shell material: ABS & aluminous stand.

36 sets per carton.

Electric Standing Desk Dual Motor Sourcing Height Adjustable Desk

External Size(MM): 1080-1800 680 685-1185
Material:
1. Including a hand control: LED screen display with memory buttons
2. Contains a controller: WHB36N2
3. Contains two uprights: three-section rectangular uprights
    (80 50mm, 75 45mm, 70 40mm)
4. Minimum height: 595mm
 Maximum height: 1245mm
5. Maximum load: 120kg
6. Speed: 38mm/s
7. Color: black, white, gray
8. Voltage: 110V or 230V
9. Anti-collision system: Yes
10. Adaptable length 1200-1800mm 
table board depth 600-800mm
Color  Black, white, grey

The lift desk can be adjusted to different heights to switch between different office postures, helping you to stand and work in the office, relieve fatigue, and facilitate small meetings and discussions

Pneumatic Braker for roll stand

XF-250/250A BRAKE DIAMETER IS 250MM
Air pressure Min. 0.02Mpa Max. 0.6Mpa
Single module torque 0.15(1.5) 16(160)

Heat dissipation power (kw) Rotating speed (100rpm) Rotating speed (300rpm) Rotating speed (600rpm) Rotating speed (1000rpm)
With fan 3.5 4.5 6 9
Without fan 1.2 2.2 3 4.8

Specification:
XF-250/250A BRAKE DIAMETER IS 250MM
Air pressure Min. 0.02Mpa Max. 0.6Mpa
Single module torque 0.15(1.5) 16(160)

Heat dissipation power (kw) Rotating speed (100rpm) Rotating speed (300rpm) Rotating speed (600rpm) Rotating speed (1000rpm)
With fan 3.5 4.5 6 9
Without fan 1.2 2.2 3 4.8

Specification:
XF-250/250A BRAKE DIAMETER IS 250MM
Air pressure Min. 0.02Mpa Max. 0.6Mpa
Single module torque 0.15(1.5) 16(160)

Heat dissipation power (kw) Rotating speed (100rpm) Rotating speed (300rpm) Rotating speed (600rpm) Rotating speed (1000rpm)
With fan 3.5 4.5 6 9
Without fan 1.2 2.2 3 4.8

Specification:
XF-250/250A BRAKE DIAMETER IS 250MM
Air pressure Min. 0.02Mpa Max. 0.6Mpa
Single module torque 0.15(1.5) 16(160)

Heat dissipation power (kw) Rotating speed (100rpm) Rotating speed (300rpm) Rotating speed (600rpm) Rotating speed (1000rpm)
With fan 3.5 4.5 6 9
Without fan 1.2 2.2 3 4.8

Engine stand 750lbs (Mk5075) & shop equipments: capacity: 750lbs package size: 86x18x18cm height: 890mm g.W./ n.W.:18/17kg 20s fcl: 900pcs mini order: 50pcs delivery time: 35days upon the deposit receipt more items are available: 1000lbs, 1250lbs, 1500lbs, 2000lbs engine stand: used for safe handing and positioning of automotive engines. 360 deg rotating head can easily position engine.


N.W.: 18kg package size: 88x20x18cm

Characteristics:
1) The structure is symmetrical, can load two rolls raw paper at the same time, can change the paper roll without stop the machine. The tighten, loosen, up and down, move for center, left and right moving all use electrical control.
2) Effective working width: 1800mm.
3) Max. raw paper diameter: Ã??1400mm
4) Min. raw paper size: Ã??400mmÃ??900mm
5) Max. load of single arm: 1500kg.
6) Each roll sand has two paper roll sending rails, two paper roll up dolly. Rail is made from the welding of the 12# channel steel and direction-leading pole. The dolly is made from 12# channel steel, the length of the rail is 4500mm.
7) Use disk model brake, have handle and electrical models. (can choose.)
8) The clip head is cast-iron finial model or automatic double expanded model. (can choose.)
9) Electrical elements are centralized controlled, this highly improves the production efficiency.

Characteristics:
1) The structure is symmetrical, can load two rolls raw paper at the same time, can change the paper roll without stop the machine. The tighten, loosen, up and down, move for center, left and right moving all use electrical control.
2) Effective working width: 1800mm.
3) Max. raw paper diameter: 1400mm
4) Min. raw paper size: 400mm-900mm
5) Max. load of single arm: 1500kg.
6) Each roll sand has two paper roll sending rails, two paper roll up dolly. Rail is made from the welding of the 12# channel steel and direction-leading pole. The dolly is made from 12# channel steel, the length of the rail is 4500mm.
7) Use disk model brake, have handle and electrical models. (can choose.)
8) The clip head is cast-iron finial model or automatic double expanded model. (can choose.)
9) Electrical elements are centralized controlled, this highly improves the production efficiency.

Technological parameters:
1. Paper roll frame working model: Mechanical electrical operation.
2. Paper roll length scope: Max.: 1800mm Min.:900mm
3. Paper roll diameter scope: Max.: 1400mm Min.:400mm
4. Single side max. load: 1500kg.
5. Motor power: (all are planet cycloid motor)
Clip motor: 0.75KW 4units 380V 50HZ
Up and down motor: 2.2KW 1unit 380V 50HZ

Paper roll up-dolly and rail:
1) On the dolly have direction-leading wheel, can send the paper roll stably.
2) Rails are installed inside of the floor, main body is made from 12# channel board and 12 cold drawl steel, the length of the rail is 4500mm.
3) Each roll stand has two paper roll sending rails, two paper roll up dolly, it can load the paper roll in two sides at the same time.

Characteristics:
1) The structure is symmetrical, can load two rolls raw paper at the same time, can change the paper roll without stop the machine. The tighten, loosen, up and down, move for center, left and right moving all use electrical control.
2) Effective working width: 1800mm.
3) Max. raw paper diameter: 1400mm
4) Min. raw paper size: 400mm 900mm
5) Max. load of single arm: 1500kg.
6) Each roll sand has two paper roll sending rails, two paper roll up dolly. Rail is made from the welding of the 12# channel steel and direction-leading pole. The dolly is made from 12# channel steel, the length of the rail is 4500mm.
7) Use disk model brake, have handle and electrical models. (can choose.)
8) The clip head is cast-iron finial model or automatic double expanded model. (can choose.)
9) Electrical elements are centralized controlled, this highly improves the production efficiency.

Technological parameters:
1. Paper roll frame working model: Mechanical electrical operation.
2. Paper roll length scope: Max.: 1800mm Min.:900mm
3. Paper roll diameter scope: Max.: 1400mm Min.:400mm
4. Single side max. load: 1500kg.
5. Motor power: (all are planet cycloid motor)
  Clip motor: 0.75KW 4units 380V 50HZ
Up and down motor: 2.2KW 1unit 380V 50HZ

Paper roll up-dolly and rail:
1) On the dolly have direction-leading wheel, can send the paper roll stably.
2) Rails are installed inside of the floor, main body is made from 12# channel board and 12 cold drawl steel, the length of the rail is 4500mm.
3) Each roll stand has two paper roll sending rails, two paper roll up dolly, it can load the paper roll in two sides at the same time.

All of extremely stands are made of high grade material and most of them can be detached for easy storage
Make it easy and safe when lifting your whole motorcycle for repair, maintenance, and storage
Optimum leverage
Oil resistant 3" wheels


Great-moto is a machine facotry, be located in hanzhou, china, long established and run by a strong, experienced management team, concentrating on cnc machining, motorcycle accessories .Motorcycle stands, tyre warmers( tire heater), racing lever, rear sets, frame slider, and metal processing products. Also we provide cnc milling machine service as your 2d/3d format drawing, meanwhile we have the services of cnc punching, cnc laser cutting, cnc bending, most of our products are sold in japan, germany, usa, france, uk, italy, spain, swden, australia etc. We have built its reputation on both quality of service and technical expertise.
in-house parts design and production, aided by cad/cam, and other technological advances, which enables us to design, manufacture, and maintain customers' products to achieve optimum performance.
a bespoke manufacturing control system ensuring effective capacity planning to achieve on time delivery.
a variety of finishing and sub-assembly facilities.
accreditation to ISO 9001, with stringent quality procedures that include apqp, fmea and spc, with quality measurement to assure our products qualified.

Transport tubes, sometimes called mailing tubes, are used in multiple sectors of the laboratory market, including environmental, independent testing, food testing, and biological research labs.
PekyBio's transport tubes are made from polypropylene (PP), and screw caps are Polyethylene (PE).
Tubes are self-standing with conical bottom and molded graduations.
Vailable in 5 mL and 10 mL, non-sterile and gamma radiation sterilized.

Hexin glass writting board is an ideal option extensively used in diverse applications in computer institutions, seminar and
Conference halls, highly facilitate to write with marker pen and help easily to clean them with dusters.A wide range of colors to be chosen, so it's easy to acquire the beautiful decorative effect. Secondly, you can discover the room becomes very comfortable and soft, which attributes to the fantastic sunshade function of the art glass.
Features:
1.With auto grade float glass as the original material
2.Scratch proof and moisture proof
3.Customarized size and pattern
4.Tangible stereoscopic pattern will never fade
5.Rich and colorful pattern design
Detailed product description
Thickness:4-12mm
Size:3300*2134mm, 3210*2140mm, 2200*1650mm, 2000*1500mm, 3048*2134mm, etc. Color:clear
Different size, thickness, high quality clear float glass can be supplied.This product can be applied on silver mirror, picture frame, automobile sheld glass, buildings and processed products.
Applications:
For domestic and commercial decoration
1.Decorative door
2.Window glass
3.Partition glass
4.Furniture glass
5.Shower room glass
6.Ktv
7.Office
8.Hanging on the wall

Introduction:
MJRS-3 Electrical Roll stand is used in the simple single facer line, for load the paper roll, and rolling paper. It has advantage of good design, beautiful appearance, work stable, and have long life for use.

Technological Parameters:
Model Max. width Min. width Max. diameter Max. Load
MJRS-3-1200 1200 mm 600 mm 1500 mm 2.5t
MJRS-3-1400 1400 mm 600 mm 1500 mm 3.0t
MJRS-3-1600 1600 mm 600 mm 1500 mm 3.0t
MJRS-3-1800 1800 mm 600 mm 1500 mm 3.0t
MJRS-3-2000 2000 mm 600 mm 1500 mm 3.0t
MJRS-3-2200 2200 mm 600 mm 1500 mm 3.0t

Mainly purchased parts, raw materials and origin:
Name of main parts Brands or place of origin Material
Main shaft Day steel production Diameter 242mm
Swing arm Production by own Resin sand gray ironHT200
wallboard Jigang prduction Q235AWelding parts
bearing HRB,ZWZ,LYC
expand chuck Zhejiang xusheng 3ã??4inch shared
Main electrical appliance France Schneider
button CHINT NP2series
Air switch French Schneider
Pneumatic components Zhejiang Sonor CSM
Hydraulic station Shandong zaozhuang
Brake pump zhejiang

Hydraulic system parameters:
1. Work pressure (Mpa):16---18Mpa
2. lifting hydraulic cylinder: 100-440mm
3. Clamping hydraulic cylinder: 63-1300m
4. Hydraulic station motor power: 3KW --380V -- 50Hz
5. Solenoid valve voltage: 220V 50 Hz

Mainly purchased parts, raw materials and origin:
Name of main parts Brands or place of origin Material
Main shaft Day steel production Diameter 242mm
Swing arm Production by own Resin sand gray ironHT200
wallboard Jigang prduction Q235AWelding parts
bearing HRB,ZWZ,LYC
expand chuck Zhejiang xusheng 3-4inch shared
Main electrical appliance France Schneider
button CHINT NP2series
Air switch French Schneider
Pneumatic components Zhejiang Sonor CSM
Hydraulic station Shandong zaozhuang
Brake pump zhejiang

Introduction:
MJRS-3 Electrical Roll stand is used in the simple single facer line, for load the paper roll, and rolling paper. It has advantage of good design, beautiful appearance, work stable, and have long life for use.

Technological Parameters:
Model Max. width Min. width Max. diameter Max. Load
MJRS-3-1200 1200 mm 600 mm 1500 mm 2.5t
MJRS-3-1400 1400 mm 600 mm 1500 mm 3.0t
MJRS-3-1600 1600 mm 600 mm 1500 mm 3.0t
MJRS-3-1800 1800 mm 600 mm 1500 mm 3.0t
MJRS-3-2000 2000 mm 600 mm 1500 mm 3.0t
MJRS-3-2200 2200 mm 600 mm 1500 mm 3.0t

Structural feature:
Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others the lifting of the paper adopts hydraulic drive.
Brake adjustable adopts multipoint braking system.
Every stand matched two sets paper car , and they can paper on the both sides at the same time.

Technical parameters:
1. The range of clamping paper: MAX1800mm MIN1000mm
2 Clamping diameters: MAX.  1500mm MIN.  350mm
3 Main shaft diameter of paper holder:  242mm
4 Gas source work pressure (Mpa): 0.4---0.8Mpa

Hydraulic system parameters:
1. Work pressure (Mpa):16---18Mpa
2. lifting hydraulic cylinder:  100 440mm
3. Clamping hydraulic cylinder:  63 1300m
4. Hydraulic station motor power: 3KW --380V -- 50Hz
5. Solenoid valve voltage: 220V 50 Hz

Mainly purchased parts, raw materials and origin:
Name of main parts Brands or place of origin Material
Main shaft Day steel production Diameter 242mm
Swing arm Production by own Resin sand gray ironHT200
wallboard Jigang production Q235AWelding parts
bearing HRB,ZWZ,LYC
expand chuck Zhejiang xusheng 3-4inch shared
Main electrical appliance France Schneider
button CHINT NP2series
Air switch French Schneider
Pneumatic components Zhejiang Sonor CSM
Hydraulic station Shandong zaozhuang
Brake pump zhejiang

Introduction:
MJRS-3 Electrical Roll stand is used in the simple single facer line, for load the paper roll, and rolling paper. It has advantage of good design, beautiful appearance, work stable, and have long life for use.

Technological Parameters:
Model Max. width Min. width Max. diameter Max. Load
MJRS-3-1200 1200 mm 600 mm 1500 mm 2.5t
MJRS-3-1400 1400 mm 600 mm 1500 mm 3.0t
MJRS-3-1600 1600 mm 600 mm 1500 mm 3.0t
MJRS-3-1800 1800 mm 600 mm 1500 mm 3.0t
MJRS-3-2000 2000 mm 600 mm 1500 mm 3.0t
MJRS-3-2200 2200 mm 600 mm 1500 mm 3.0t

HS CODE: 844180900

Introduction:
*This machine is used for supporting the paper roll, supply the paper to the production line
*It can be loading two paper rolls at the same time, without stopping the machine for changing paper roll
*The whole machine moving use 5 motor fully electric controlled, electric control arm lift and down, clamping and open, left and right moving
*Tension control: manual or pneumatic disc brakes
*The chuck adopt inner expansion type or teeth type, reduce the destruction of the paper core. saving paper

Specification:
Max. working width 1600-2500mm
Min. working width 700mm
Max. paper mill dia 1400mm
Max working pneumatic pressure: 0.6-0.9Mpa
Power requirements: 380V, 50Hz
Length of track for carry paper mill 4270mm
Clamping Motor Power 550W*4pcs
Lifting Motor Power 1.5KW

Functions & features:
1) optional metal mounting base; specially designed separation way for stand & metal mounting base; mounting to table top / wall surface by 3m adhesive tape / screws.
2) led on base red / blue / green color for your options.
3) independent alarm stand da1852b is compatible with es548c sensor;
Non alarm stand da1852 is compatible with es548b4v super sensor (with independent alarm function);
Non alarm stand da1852 can work with es548c sensor & central control alarm units.
4) 90or 180adjustable display angle for sensor head.
5) can indicate alarm location.
6) provide charging output max charging current 2a.
7) da1852b has many alarm functions. Alarm can be triggered when:
Bottom base is tampered / sensor is disconnected / charging cable is cut or taken out.
8) stand color: white / black / silver / gold.
9) suitable for merchandise displays of mobile phone or small-sized electronic products.

Main parameters:
1) stand shape & size: oval shaped stand: 6.3 x 4.9 x 7 cm (intermediate value).
2) main material for the stand: abs. Material for metal mounting base: aluminum.
3) alarm volume for da1852 alarm stand: â?¥100db
4) max output charging current: 2a.
5) battery standby time (for the rechargeable lithium battery inside da1852b): 7 days (if no external power supply)
6) code modification function: yes.
7) low battery indication: yes.
8) external power on / off indication: yes.
9) display angel: adjustable.
10) power input via: usb plug, 1 meter cable

Optional accessories for da1852b:
* power adapter: 5v/a2-usb / 5v/2ax6usb power adapter.
* charging cable types: micro usb, apple, type-c.
* dp1151 / dp1161 apple clamp (clamp for mobile phone / tablet).
* eas051r hand-held decoder (with detacher & remote key functions).

Characteristics:
1) The structure is symmetrical, can load two rolls raw paper at the same time, can change the paper roll without stop the machine. The tighten, loosen, up and down, move for center, left and right moving all use electrical control.
2) Effective working width: 1800mm.
3) Max. raw paper diameter: Ã??1400mm
4) Min. raw paper size: Ã??400mmÃ??900mm
5) Max. load of single arm: 1500kg.
6) Each roll sand has two paper roll sending rails, two paper roll up dolly. Rail is made from the welding of the 12# channel steel and direction-leading pole. The dolly is made from 12# channel steel, the length of the rail is 4500mm.
7) Use disk model brake, have handle and electrical models. (can choose.)
8) The clip head is cast-iron finial model or automatic double expanded model. (can choose.)
9) Electrical elements are centralized controlled, this highly improves the production efficiency.

Technological parameters:
1. Paper roll frame working model: Mechanical electrical operation.
2. Paper roll length scope: Max.: 1800mm Min.:900mm
3. Paper roll diameter scope: Max.: 1400mm Min.:400mm
4. Single side max. load: 1500kg.
5. Motor power: (all are planet cycloid motor)
â?  Clip motor: 0.75KW 4units 380V 50HZ
â?¡ Up and down motor: 2.2KW 1unit 380V 50HZ

Paper roll up-dolly and rail:
1) On the dolly have direction-leading wheel, can send the paper roll stably.
2) Rails are installed inside of the floor, main body is made from 12# channel board and 12 cold drawl steel, the length of the rail is 4500mm.
3) Each roll stand has two paper roll sending rails, two paper roll up dolly, it can load the paper roll in two sides at the same time.