Find Verified Low Back Revolving Chairs Suppliers, Manufacturers and Wholesalers

The main raw material of PTA and MEG is added with modifiers of third monomer and fourth monomer, etc., then subjected to copolymerization reaction to make modified polyester pellet with melting point at 100'C - 225C.

Functional characteristics low melting point, good spinnability and excellent fiber adhesion effect

Application scope manufacturing bi-component core-sheath fiber and filament yarns, etc.

Specification - LOW MELTING PET CHIPS TRB FIBER GRADE 110-225.

Low Grade Titanium Ore refers to naturally occurring titanium-bearing mineral concentrates primarily Ilmenite with moderate titanium dioxide (TiO) content (typically 35% - 55%).

This type Chips that is designed to resist burning and melting at low temperatures.
Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch
Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating
Description:
Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220.
The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180.

Application:
Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products.

LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane.

Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue.

Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.

Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility.As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This high carbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry.The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentaly responsible future. Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dust a testament to our unwavering dedication to environmental responsibility and innovation.

Product Type Carbon Dust / Low-Grade Coal
Form Fine powder
Color Black
Fixed Carbon 40-60%
Ash Content 25-45%
Moisture 2-12%
Volatile Matter 5-20%
Sulfur 0.1-1.5%
Gross Calorific Value (GCV) 3,500-5,000 kcal/kg
Particle Size 0-5 mm or customized

Carbon Dust is a high-quality powder with a purity of 100%. It is designed in a powder form, making it easy to use and handle. The product does not float, ensuring easy application and minimal waste. The fine powder appearance makes it suitable for various industrial and commercial applications. As a trusted supplier and trader, we ensure that Carbon Dust meets the highest standards of quality and consistency, making it a reliable choice for your specific needs. Whether its for environmental remediation, filtration, or any other application, our Carbon Dust is the ideal solution for your requirements.

Moisture Content 2.60%
Ash Content 38%
Volatile Matter 6.76%
Fixed Carbon Content 48%
Total Sulphur 0.10%
GCV 4072 kcal/kg

Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility.As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This highcarbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentaly responsible future. Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dust a testament to our unwavering dedication to environmental responsibility and innovation

New-type hot-connectivity composite fiber is made from different types of modified high molecular materials through advanced composite spining technology. It has unique characteristic of melting at low temperature, and after hot treatment, it can naturally adhere without use of binder, green and environmental. The product abides by strict sanitation control standards to achieve sanitation material grade. The products include ES fiber and ETS modified polyester composite staple fiber which is initiated by the company, and can be applied to production of surface layer and guide layer of disposable sanitary articles

Functional characteristic

the product is a kind of chemical blend provided with advantages of the two materials. ES fiber has low melting point on the superficial layer, soft, bouffant and pervious, while the core layer has certain intensity and fiber state. ETS fiber is provided with advantages of heat bonding, high hygroscopicity and antistatic property, etc.

Application scope

the sanitary products are applicable to hot air penetrating technology to produce surface layer and guide layer of disposable sanitary materials such as paper diaper and sanitary towel; the conventional low-melting fiber is applicable to production of hard cotton, decorative wall board, environmental mattress, seat mat, environmental filter media, constructional acoustic damping and heat insulation materials, etc.

Specification 4D*51MMã??4D*32MM

Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our
premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility.As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This high carbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentaly responsible future.Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dustâ??a testament to our unwavering dedication to environmental responsibility and innovation

Commonly used as a binder fibre in core-sheath constructions, our Polyester Low Melt LMF (CoPET/PET) fibre bonds to other polyester fibres to produce wadding, insulation, filtration, automotive, and other products where heat is used to bond the fibres. This fibre is normally blended with solid polyester fibres or recycled materials.

Black 6DX51mm Virgin Low melt Polyester Staple Fiber for Filling

As substitute for existing chemical glue, LMF (Low melt fiber) is one kind of eco-friendly fiber which is developed by innovation.

LMF (Low melt fiber) is sheath/core structure PET/COPET, sheath is modified low-melting polyester (melting point 110â??) and core is general polyester.

During heat processing, sheath components are melted and adhered to stick fiber together, but core will be there to keep good resilience and shaping.

Now LMF (Low melt fiber) is widely used for nonwoven industries with very good self-adhesiveness by blending with other fibers.

This type solar water heater has pumps to circulate thermal media, (water, or glycol) to exchange heat from the solar collector to the water storage tank.

Thermal media circulate and collect heat from the collector and transfer to the drain back storage tank. The solar pump activates and heat transfer occurs only when it is required and as a result heating of the water happens in the controlled manner.

As the media drains to the drain back tank from the collector freely, the storage tank always needs installed below the collector and the interconnecting pipes must have slope.
Tanks can be installed separately from the collector
No overheating
Electric backup heater with auto temperature control
Remote monitoring & Control options

Drain Back Solar Water Heater

Drain back systems are closed-loop, indirect, active solar water heating systems. Glycol-water or mix of both will act as heat transfer media. The heat transfer media contained in an unpressurized, closed loop is pumped through the collectors. The media will transfer heat to the domestic water through a heat exchanger.

Origin - India .Russa, china


Packaging - 55 Gal Drum


Price - 400 USD MT


General Specs - Clear to Yellow free flowing liqued , SG 1-1.1Sg Cloud point at (3%in 10% NaCl Solution ) >120F or 50C , Fully soluble in water & Flash Point 230F Or 110C



Minimum Order - One 20 MT Container

Sugarbeet Shreds, Alfalfa, Rice Bran, Wheat Bran, Wheaten Chaff, Soya Oil, Soybean Meal, Wheat Bran, Salt, Vitamin and Mineral Premix, Barley,Limestone, Mycotoxin Adsorbent, Bio-available Selenium , Live Yeast Culture and DCP

Rose Zipped Back Romper

Product Name : Colorful low density mattresses available for cost effective solution. Any size

Product Description :
A 13kg density mattress with colorful fabric.

Price of product ( USD price or FOB price) : Different Sizes have different prices. Please contact us for price.

Product origin : Made in UAE

Key Specifications/Special Features :
Popular in the market for its cheap price.

Minimum Order Size and Packgaing details :
If out of UAE then Min Order 1 20ft container or full trailer. If want fewer qty we are flexible, discuss with us.
Within UAE Min Order 1 pcs.

Our coffee beans are freshly roasted to perfection, preserving their natural oils and flavors. With notes ranging from fruity and floral to nutty and chocolatey, each variety offers a unique tasting experience that will awaken your senses. Enjoy the satisfaction of brewing your own coffee at home, knowing youâ??re using high-quality beans that elevate your daily ritual.

Low Aromatic White spirit is a volatile colorless liquid distilled from petroleum mostly used as a paint thinner and solvent.

Evacuated type solar collector
Pressurized and non-pressurized systems

Premium Alloy for High-Performance Steel Applications.

Key Benefits of Low Carbon Ferro Chrome: Product Specifications:
Chromium (Cr): 60% - 62%
Silicon (Si): â?¤ 1.0%
Carbon (C): â?¤ 0.1%
Sulfur (S): â?¤ 0.03%
Phosphorus (P): â?¤ 0.04%
Size Range: 10 - 50 mm (Min. 90%)

Applications of LC FeCr:

1. Stainless Steel Manufacturing
LC FeCr is essential for producing both austenitic and ferritic stainless steels. Its low carbon content minimizes carbide formation, enhancing corrosion and oxidation resistance.

Applications include:
- Kitchen appliances
- Medical instruments
- Construction materials

2. Specialty Alloy Steels
Used in the production of tool steels, ball-bearing steels, and HSLA steels, LC FeCr improves toughness and wear resistance.

Ideal for:
- Automotive components
- Aerospace applications

3. Foundry & Casting Industry
Enhances hardness and durability in cast iron and steel castings. Also used in welding electrodes and hardfacing alloys for added wear and corrosion resistance.

Applications:
- Steel castings
- Welding consumables

4. Chemical & Petrochemical Equipment
The high chromium content makes LC FeCr perfect for acid-resistant steels used in aggressive chemical environments.

Examples:
- Chemical tanks
- Pipelines
- Refinery components

5. Energy & Power Generation
LC FeCr provides high-temperature oxidation resistance, making it ideal for energy systems.

Applications include:
- Chemical tanks
- Gas turbines
- Power plants