Find Verified Light Diesel Oil Suppliers, Manufacturers and Wholesalers

Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 �¢??) and heavy diesel (with a boiling point range of about 350-410 �¢??). Widely used in large vehicles, railway locomotives, and ships.
The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.

Custom Liquid filled Solar Inverter Step up Oil-Immersed Transformer for photovoltaic power plants includes hermetically sealed, amorphous alloy, conservator type and on-load tap changer type, which is usually pole mounted or installed in distribution station for daily lighting and factory power whose LV output up to 0.4kV. Our distribution transformer rating is up to 2500kVA, and primary voltage up to 35kV. The corrugated tanks as thermal expansion and contraction component enable the transformer oil completely isolated with the atmosphere. Oil distribution transformer with primary voltage range of 6,10,10.5,11,20,22,24,33, 35,38.5kV can be manufactured according to customer requirements.

Aviation turbine engine base lubricating oil (synthetic oil) is a high-performance lubrication base component specially designed for turbine engines (turbojet, turbofan, turboprop, turboshaft). It must pass rigorous certifications such as MIL-PRF-23699 (US military standard), MH/T 6084 (civilian standard), and GJB 135A (national military standard). Its core function is to lubricate bearings/gears, dissipate heat, prevent coking and corrosion, and ensure the stable operation of the engine under extreme conditions ranging from -60to 246.

The Uncooled-infrared thermal imaging module offers two resolution options:
640-512 and 384-288. Featuring high-sensitivity 12µm VOx infrared detectors and proprietary image processing circuits, it delivers high performance with compact size, lightweight design, low power consumption, and cost-effectiveness, fully meeting , SWaP (Size, Weight, and Power/Price) requirements.
This product utilizes the latest infrared thermal image processing algorithm, delivering refined and crystal-clear visuals. Its proprietary image processing circuit ensures high scalability. The module also offers multiple digital interfaces (some customizable) to meet user needs, enabling seamless integration with various intelligent processing platforms.

Light Diesel Gasoline Oil Purifier for Series TYB
Gasoline Diesel Oil Purifier

Light Diesel Gasoline Oil Purifier for Series TYB

Application:
It is for treating the diesel oil,fuel oil,gasoline oil for the generators.
This machine integrates fine filter, high efficiency demulsification and dehydration into one body. This machine, which can remove large amount of water without heating, even 50% water, creates the fastest dehydration speed,
It can quickly separate water from the oil, which even contains half water, to attain cleanness of NAS 6 grade, Convenient using with the go-cart model designed. In a word, it is be used for fast removal of water and sediment in fuel oil or light oil which contains large amount of water.
It can not only remove the impurities, water, and acid matters, organic and inorganic acid effectively, but also can remove guargum,surf, colloid and other sludge can be removed together.

Feature:
1 TYB series purifier adopt special oil water separator which requires no heating, offering 20 times higher water removing efficiently than over other types of purifiers.
2 As no heating is needed, the additives in the oil are well prevented from degradation or deterioration.
3 Easy-to-operate, water can be discharged online automatically without the presence of operators.
4 Low operation cost, 20%-40% lower than vacuum purifier, centrifugal purifier and filter press.
Technical Parameters:
Parameters Unit TYB-10 TYB-20 TYB-30 TYB-50 TYB- 80 TYB- 150 TYB-200 TYB-300
Flow rate L/min 10 20 30 50 80 150 200 300
Working pressure Mpa 0.3
Working noise Db(A) 65-75
Running hours without malfunction H 4000
Continuous running hours H 150
Water content ppm 3
Particle Size um 0.5
Cleanliness NAS 6
Power KW 0.75 0.75 0.75 2.2 2.2 3 3.5 3.8
Size mm 700*570*1200 700*600*1200 800*600*1200 850*650*1200 900*680*1200 1100*750*1200 1300*750*1200 1400*800*1200
Weight Kg 80 90 105 135 150 185 200 230

Our company export all kinds of Oil Purifier Machine we have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.

Cold-pressed castor oil in a 50 ml amber roll-on bottle with a rose quartz stone ball, packed in a printed box. For hair, brows and skin. Non-hazardous for transport, MSDS available.

For pharmaceutical intermediates
2-Cyanophenol
Product name 2-Cyanophenol CAS NO.: 611-20-1
MF: C7H5NO
Structural type:
Properties: Grayish white to light brown powder.Items Specification
Appearance White or off white powder
Salicylnitrile content, % 98.0
Salicylamide content,% 0.5
water content,% 0.5

It currently adopts the most advanced principles of Coalescence-separation in world, collecting filtration precision and efficient demulsification and dehydration in one, can remove a large amount water without heating the oil, can fast separate water from the oil that has the equal amount of oil and water, and after treatment the cleanliness level up to NAS6, the water content in oil up to 50ppm, it is not easy to rust when use the oil after filtration to clean the bearings, lower costs, the oil can be reused, compact design, simple and easy to operate. Basically it is non-wearing for parts, low maintenance costs, small energy consumption, and the trolley-style design is convenient for the movement of equipment.



Working Principle
Coalescence separator is equipped with two different functions of the filters inside - separation filter and coalescence filter. the medium for dehydration go through the import of coalescence separator into the filter shell, and the filter tray distribute it to of each coalescence filter, liquid flows from inside to outside of coalescence filter, after filtration, emulsion breaking, coalescence, and sedimentation four process, the liquid demulsify the emulsion, and then after demulsification the droplet water form the large big one and subside at the bottom of the shell. Part of the droplet water with the liquid flow into separation filter, the filter is made up of a special filter material with good water-repellent performance, small drops were completely and effectively blocked outside of the filter, and form bog drops again to subside, so as to ensure effective removal of water. The water subside at the bottom of the shell can be shown by the lever meter, so that the water and dirt can be removed out by the drainage valve from time to time. The media after separated water will be collected by separation filter tray, and flow out from export of the separator.




Technical parameters

Items Unit TLA-10 TLA-20 TLA-30 TLA-50 TLA-70 TLA-100 TLA-200
Flow L/min 10 20 30 50 70 100 200
Working pressure Mpa 0.3
Water content in oil PPM 50
CLeanliness NAS 6级
Working noise dB(A) 55 65 85
Power KW 0.75 0.75 0.75 2.2 2.2 3 6
Dimension mm 700 700 700 800 800 1000 1500
570 570 600 650 650 700 1000
550 600 650 750 800 850 1200
Weight KG 100 110 130 150 160 190 260
Dimension and weight will be changed with changing the technical specification.

There are two main types of aviation fuels used by airlines around the world: aviation gasoline and jet fuel, which are suitable for different types of aircraft engines. Aviation gasoline is used as fuel for piston type aviation engines. Due to the fact that jet fuels commonly produced and widely used both domestically and internationally belong to the kerosene type, they are commonly referred to as aviation kerosene, abbreviated as aviation coal.

1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.

Infrared optical lenses are specialized optical lenses designed specifically for receiving, focusing, and processing infrared wavelengths (typically referring to electromagnetic waves with wavelengths ranging from 0.76 1/m m to 1000 m). They differ fundamentally from the visible light lenses we are familiar with (such as camera and mobile phone lenses) in terms of design, materials, and working principles. Their core task is to efficiently transmit infrared radiation and form high-quality images.
In simple terms, it is an "eye" that enables "infrared cameras" to discern the temperature and outline of objects.

1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.

For pharmaceutical intermediate
2-Cyanophenol
Product nameï¼?2-Cyanophenol CAS NO.: 611-20-1
MF: C7H5NO
Structural type:
Properties: Grayish white to light brown powder.Items Specification
Appearance White or off white powder
Salicylnitrile content, % 8.0
Salicylamide content,% 0.5
water content,% 0.5

Application of nitrocellulose
Nitrocellulose, also known as cellulose nitrate or nitrocellulose, is an organic polymer compound with the chemical formula (C6H7N3O11) n. It is the product of the esterification reaction between cellulose and nitrate, usually in the form of white or slightly yellow cotton fluff, insoluble in water, but soluble in organic solvents such as esters and acetone
Nitrocellulose, also known as cellulose nitrate ester, abbreviated as NC, commonly known as nitrocellulose, is the product of the reaction between cellulose and nitrate. Nitrocellulose made from cotton fibers is called nitrocellulose. Nitrocellulose is a white fibrous polymer that is resistant to water, dilute acids, weak alkalis, and various oils. Different degrees of polymerization result in different strengths, but they are all thermoplastic substances. Easy to change color under sunlight and highly flammable. Attention should be paid to safety in production, processing, packaging, storage, transportation, sales, and use.

Description

1) Widely used in construction, mining, metallurgy, chemistry and food industries, as well as power plant and ports
2) Light weight and high strength
3) Acid, alkali, heat, humidity and impact resistant
4) Good trough ability

Synchronous or asynchronous avilable

speed,voltage, power,frequency could be customized according to user's requriements
wind cooling and water cooling type
class H insulation , protection grade IP55,

started directly, without control cabinet
Finite element analysis is used in designing.
Compact structure, low startup torque solves the problem of low speed.
Inproving water energy utilization
strong rotors, the generator could achieve high speed

small size, light weight , high energy density, suitable for special situations
run efficiently throughout the whole speed range, hight efficient on producing power
high-speed oil-contained bearings, maintenace free, more reliablem long service life
the parameters like voltage, speed, power can be customized,
the shape can be changed,
more mounting way for your choice, like spline shaft, biaxial extension, flange

CE approved

Two-piece ceramic oil and incense burner with a candle chamber below and a removable dish above. Matte glaze, black, matching spoon included. Works with wax melts, essential oil and bakhoor. Packed in a foam-lined colour box for sea freight.

Bod series oil refinery machine could ture black and waste engine/car/diesel/motor/lubricating/crude/heavy fuel/rubber oil into base oil.
This machine could help to save your energy and bring profite for you in long term.
For more details, do not hesitate to contact me, your reply will be highly appreciated!

Bod series oil refinery machine could ture black and waste engine/car/diesel/motor/lubricating/crude/heavy fuel/rubber oil into base oil.


If this is not your needing type, follow is our catalogue for you to choose:
Series zy single-stage vacuum transformer oil purifier
Series zyd double high vacuum transformer oil purifier
Series zyb multiply-function insulating oil treatment machine
Series ty turbine oil purification apparatus
Series tya lubricating oil/ hydraulic oil purification unit
Series lye engine oil recycling machine
Series bod black dirty oil regeneration equipment
Series dod diesel oil regeneration equipment
Series tyb portable light fuel oil purification machine
Series ly plate pressure oil purifier
Series tyd vacuum dehydrator
Series jl portable oil filtering and oiling machine
Series iij oil tester (bdv tester)

Series JZC waste engine Oil regeneration equipment is specially designed for regenerating the black engine oil and diesel oil. It can effectively remove the wear debris, asphalt, wax quality, impurities, moisture, acid quality, organic acids and inorganic acids from waste engine oil; also, carbon particles, deep oxides and other fine impurities which disperse in oil are all removed out. JZC series can demulsify and improve oil color, making the regenerated oil color closed to new oil color, recover the oil performances. After the regenerating process, the treated oil will be the engine oil and diesel oil, which is suitable for making new diesel oil or lubricating oils.


wooden case

DSP Coalescence-separation Diesel Fuel Oil Filtration Systems uses coalescing filter to separate the free and dissolved water from oil, meanwhile, it also equips separation filter, which removes the water drop by gravity, falling into the water tank. DSP Diesel Fuel Oil Filtration Systems equips micro filter elements to remove the particles and cleanness up to NAS 6 grade. The oil purifier realizes online running with fuel filled, turbine oil filled and lubricating oil filled systems, especially good for water- leakage systems.

Features:
1.Rapidly removing large amount of water from oil and water content reach 100 PPM.
2.The working conditions of all the parts are displayed clearly, monitoring, alarming, action control and safety stop enable the oil purifier to run online.
3.The coalesced oil takes the least restricted path to exit and rises or floats through the media to the top of the bulk liquid surface.
4. DSP Diesel Fuel Oil Filtration Systems can remove the impurities through coarse filter, protecting filter, and fine filter.

This machine utilizes advanced coalescer and separator filter elements, gathers fine filter, high efficiency demulsification and dehydration in integral whole.

This machine, which can remove large of water without heating, creates the fastest dehydration speed in domestic at present. It can quickly separate water from the oil which even contains half water and attain cleanness of nas grade 6.

Convenient to use with the go-cart model designed, this machine is suitable for treating light oil with high water content.

Permanent magnet rotro structure,no field winding, no carbon brushes, no slip rings, simple structure,
high speed, small size, light weight, and large power densityreliable and durable
high efficient,small heat ,long life
save energy more than 15% than ordinary mortors

Product features
1.AS emergency power, it can help to solve power failure rapidly. Light, 4-wheels is the best choice for outdoor working.
2. High conversion rate 100% copper alternator, class F insulation, high conversion rate.
3. Stable output Smart AVR controller ensures stable voltage and less voltage waveform distortion.
4. Digital panel Digital intelligent control panel with display of voltage, frequency and running time, makes easy maintenance.
5. Easy carrying An open frame configuration means its easy to move and use.
6. Wide application Various output sockets are available to meet all customers requirements
7.Warranty period is one year or 500 hours.

Diesel engine features:
1.Easy and quick start, easy maintenance, low operation cost.
2.Strong Power, the miniaturized fuel injection system/
3.Low fuel consumption, stand up the hard work.
4.High quality spare parts, excellent performance.
5.Process innovation, long service life.
6.Light weight, compact construction.
7.Unique drive system, safe and reliable.

waste engine oil recycling plant to diesel fuel can be used in black engine oil, crude oil,plastic oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with raw material , through the gas,fuel oil or coal heating to working temperature, the maximum working temperature about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of raw material in reactor is complete, stop heating, and remove residue from the tank of bottom, then this machine can be used again.
Systems of waste engine oil recycling plant to diesel fuel
Reaction tank: raw material will be pumped into this tank from the primary filter .
Heating system: by burning fuel oil ,gas or coal to make the oil temperature up to setting value. This system equips with insulation system.
Catalytic system: raw material reaches the predetermined temperature, via catalytic effect, and then the gaseous hydrocarbons will become gasoline and diesel composition.
Cooling system: gasoline and diesel after catalytic effect can be condensed into liquid materials.
Temperature control system: ensure that raw material transform into gasoline and diesel oil, raw material drying by distillation, can stop heating timely.
Exhaust gas handling system: a small amount of not liquefied gas via treated, can meet emission standards.
3.Index of oil after treatment:
Yield
diesel oil : 86-88%,
gasoline oil: 5-6%,
oil residue: 6-8%.
Low-speed diesel engine can be used directly.

Overview
black motor oil recycle to diesel fuel machine can be used in black engine oil, crude oil,plastic oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with raw material , through the gas,fuel oil or coal heating to working temperature, the maximum working temperature about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of raw material in reactor is complete, stop heating, and remove residue from the tank of bottom, then this machine can be used again.
Systems of black motor oil recycle to diesel fuel machine
Reaction tank: raw material will be pumped into this tank from the primary filter .
Heating system: by burning fuel oil ,gas or coal to make the oil temperature up to setting value. This system equips with insulation system.
Catalytic system: raw material reaches the predetermined temperature, via catalytic effect, and then the gaseous hydrocarbons will become gasoline and diesel composition.
Cooling system: gasoline and diesel after catalytic effect can be condensed into liquid materials.
Temperature control system: ensure that raw material transform into gasoline and diesel oil, raw material drying by distillation, can stop heating timely.
Exhaust gas handling system: a small amount of not liquefied gas via treated, can meet emission standards.
3.Index of oil after treatment:
Yield
diesel oil : 86-88%,
gasoline oil: 5-6%,
oil residue: 6-8%.
Low-speed diesel engine can be used directly.

Main products:

Diesel generator set: power by Perkins, Cummins, Doosan,Deutz, Volvo,Ricardo Yuchai and so� on.
Natural gas generator set: power by Perkins, revised Cummins, Yuchai and son on.
Generator type: open generator, silent generator, mobile generator

The power range of our generating set is from 6kw to 3000kw, it is coupled by world famous brand engine such
as Perkins,Cummins,Deutz,Doosan,Yuchai etc. with world famous brand alternator such as Stanford, Marathan,
Leroy Somer etc.

FAQ
---------------------------------------------------------------------------------------------------------------------------------------
Q1: Are you trading company or manufacturer ?
: We are factory.

Q2.What is your power range of your diesel generator: we can provide power from 6KVA-3000KVA 

Q3. How long is your delivery time?
A: 2-6 weeks

Q4: What is your terms of payment ?
A: T/T 30% in advance and  TT 70% balance paid before shipment or 100% LC at sight. 

Q5: What is your warranty period?
A: Our payment terms is 1 year or 1500 running hours whichever comes first. But based on some special project, we can extended our warranty period.

Q6: Do you offer OEM service?
A: Yes 

Q6: How could I trust you?
A: Diesel Service & Supply stands behind the quality of all the used generators and industrial power equipment we sell. If you are not convinced by the pictures, videos, check-in reports, load tests, customer experiences and sales associates' knowledge about the generator you are interested in, then we invite you to come visit our expansive yard and shop facility to witness a load test and see the professional operation we have going on here.

Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.

Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.

Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.

Low Noise Running
Scientific damping effect, advanced air-flue design and muffler device.
Strong power
With four-stoke diesel engine, new tip-clearance fuel pump and bottom inertia injection technology, makes burning full and power strong.
Low oil level alarming system
New AVR (Automatic Voltage Regular) provide Overload protection
Short circuits protection
High conversion efficiency
class F insulation, high conversion efficiency, smart AVR controller ensures stable voltage and less voltage waveform distortion
100% copper alternator with advanced winding & provide a stable output while running inductive loads
Preheating device
With air-preheating device, it can be easily started at low temperature.
Optional items
Remote control, more control distance and control as your kindly heart.
Remoter: control anytime anywhere freely.
ATS Control to make the city power and generator change more easy.
ATS: automatic transfer from city power and gen-set power.
It can be used Smart digital panel to make the generator more easy and safe using.
Intelligent digital control panel: with overload, over voltage, over current and low oil pressure protection function.

One unit, dual function
Welding and power supply at the same time.
Supper welding
With Koop strong air-cooled 4-stroke diesel engine, provides supper welding current.
High conversion efficiency
100% copper alternator, class F insulation, high conversion efficiency, smart AVR controller ensures stable voltage and less voltage waveform distortion
Safe and low fuel consumption
With new tip-clearance fuel pump and bottom inertia injection technology, security is better than that of gasoline.
Portable design
New design of frame, compact structure, four strong wheels, easy to move.

Small lighting towers with 4x500W matal halide lamps

Engine:DE186FAEAlternator:GPA5KVAController:MetersFrequency:50/60Hz
Model GLT2000-5M
Type of Lights Metal Halide Lamps
No. & Power of Lights 4*500W
Lights Bar Tilting System 90 Manual Operation
Light Capacity 4 x 40000 luemn
Mast Lifting System Vertical Mechanical
Mast Section 3
Max. Height of Mast 5 meters
Brake System Mechanical Parking Brake
Engine Model DE186FAE
Engine Speed 3000/3600RPM
Max. Power 9.0HP
Displacement 416CC
No. of Cylinder Single
Engine Type Air-cooled, 4 stroke DIESEL
Frequency 50/60Hz
Phase Single
Generator Rated Power 4.5/5.0KW
Fuel Tank Capacity 16L
Continuous Operation Time 15 hours
Dimension (LxWxH) 1200*600*2200mm
Net Weight 280kg

High performance, high quality, good price.


Standard packing

Feature
1mW red laser output, test scope more than 5km
650nm highlight red laser output, convert between CW and 2Hz
Universal interface adapter, suit for FC, SC and ST.
Stable single or multi mode of wavelength, CW or 2KHz
Big LCD show working wavelength state
One press to shift work wavelength, flexible to operate.
Technique Parameter
Model DT-605A DT-605B DT-605P
Output wavelength 850nm /1300nm 1310nm /1550nm 1300nm /1490nm /1550nm
Output power -10dBm -5dBm -5dBm
Laser type LD
Spectrum range 850nm@10nm ; 1300nm/1310nm/1490nm/1550nm@5nm
Stability 0. 01dB@5 minutes£»0. 1dB@24 hours
Connector type FC/PC £»Customized ST or SC
Fiber type SM¡¢MM
Audio load wave 270Hz, 1KHz, 2KHz
Display info Wavelength¡¢Battery¡¢carrier wave state
Power auto on/off 10 minutes
Battery type AA alkaline cell, rechargeable lithium battery
Continuous working time >40h

Technical parameters:

Dimensions 304 264 68 (mm)
Flame retardant abs material shell white shell
White oval lamp flame-retardant casing material, transparent pc cover
Mount installation
The main electric power supply 220v 50hz
The main electric power 1.8w
Source type 2 6v 0.3a incandescent bulbs, 2 1.8w
Standby power supply 6.0v, 1200mah Ni-Cd battery
Emergency response time 90min
Charging time 20h
Conversion time 0.25s
Non-continuous mode
Ambient temperature -10 - 50
Relative humidity Rh 95%

We are the manufactory of motorcycle lighs, our manufactory established in 1995. We are specialized in motorcycle lights, and most of our products have passed e-mark and dot certification. We have the professional testing equipment, we sell out our products are after our strict testing. We are the main supplier of zongshen, lifan, and ect. If you want more prictures pleas let me know. Hope our products will meet your demand

7-ply carton

Light truck

Standard equipment: 5-20transmission, 1030rear axle, heater optional: clutch electronic fan; power steering
Actual payload: within 3.5 t; purpose: for city middle and short distance transportation purpose; potential buyers: vehicles rental company, wholesalers, self-employed people and companies.

Ro-ro or container; 3410kg; 5215mm81900mm*2150mm

Light truck

Jl465q5 and jl474q is gasoline engine
Standard equipment: gasoline, heater, optional: air conditioning
Actual payload: within 1.5 t; purposes: for city short and long distance transportation
Potential buyers: wholesalers, self-employed person, companies and vehicles rental companies

Ro-ro or container; 2830kg; 4545mm * 1690mm * 2040mm

Light truck

Standard equipment: 5-20transmission, 1028rear axle, heater, without sub-rear spring leaf Optional: 6.50-16tyre, clutch electronic fan;
Actual payload: Within 2.5 T; Purpose: For city middle and short distance transportation purpose; Potential buyers: Vehicles rental company, wholesalers, self-employed people and companies.

Ro-ro or container; 2875kg; 5020mm*1800mm*2130mm;

Light truck

Standard equipment: 5-20transmission, 1028rear axle, heater, without sub-rear spring leaf optional: 6.50-16tyre, clutch electronic fan
Actual payload: within 2.5 t; purpose: for middle and short distance city transportation purpose; potential buyers: vehicles rental company, wholesalers, self-employed people and companies.

Ro-ro or container; 2095kg; 5020mm*1800mm*2130mm

Comfort
Foklift use of advanced HumanComputer Engineering Technology, Engine suspension damping devices, drive axle flexibility to connect, configuration low input torque steering, made it more easy to turn in situ; Adjustable steering wheel can adjust according to the operating environment situation shape of operator will not fell fatigue under longtime working Wide leg space make operator more comfortable Suspension design of high-intensity whole hood, built-in advanced sound-absorbing insulation materials.

Reasonably stable low center of gravity
Computer simulated the most reasonable low center of gravity, and use of high-strength steel to weld the body of the forklift, ensure the reliability of transportation.

Security
Lifting system gantry wide field of vision, dramatically improved the vision of drivers, to make sure the safety and speed of operation. Pipeline system provided a safety device, even if the pipeline ruptured, door frame will not be out of control.

Cooling system
Using large-capacity copper water tanks, international advanced cooling technology, to ensure that the vehicle has good heat dissipation.

Electrical System
Using the latest technology of the harness and waterproof plug-ins , multi-fuse fuse layout, greatly enhanced the safety and stability of circuit system.


Diesel Forklift 2.0T-2.5T
Performance

Self-priming design (require initial priming to operate)
Suitable for waste water transfer, irrigation, garden, mining and civil engineering
High quality cast-iron impeller
High quality ceramic plunger, silicon carbide water seal
Low oil consumption, low noise
Powered by advanced YARMAX engine, reliable performance, easy start

General features:
Engine (CCEC cummins MTAA11-G3)
Radiator 40oc max, fans are driven by
Belt, with safety guard
24v charge alternator
Alternator: single bearing alternator IP23,
Insulation class h/h
Absorber
Dry type air filter, double fuel filter, oil filter,
Coolant filter
Main line circuit breaker
Standard control panel
Two12v batteries, rack and cable
Ripple flex exhaust pipe, exhaust siphon,
Flange, muffler
User manual.

Place of Origin: Chongqing, China (Mainland)
Brand Name: YANGKE
Model Number: YK500GF-KTA19
Output Type: AC Three Phase
Speed: 1500RPM
Frequency: 50HZ
Rated Power: 500KW
Rated Voltage: 400/230V
Rated Current: 900
Bore&Stroke: 159x159mm
Type of governor: Electronic
Usage: construction,hotel,school,mine,etc
Certification: CE,ISO9001,SGS,GOST,TUV,BV
Advantages: small size,large power reserve,high reliability
Options: silent,container,dust proof
Color: as your request
Warranty: 1 year or 1000 working hours
Engine Net Weight: 4300kg
Package Dimension: 3550x1500x2100mm
Packaging & Delivery

Packaging Details:bubble film or naked packing with plastic wrap.
Delivery Detail: within 7 days after deposit confirmed