Find Verified Metal Products Suppliers, Manufacturers and Wholesalers

Used beverage can scrap, sorted and baled for recycling. Price depends on cleanliness, contamination, and bale density.

Advantages :
High Recyclability: Aluminium can be recycled repeatedly without losing its fundamental properties.
Lightweight: Offers an excellent strength-to-weight ratio, making it valuable for various aluminium applications.
Energy Efficient: Recycling aluminium generally requires substantially less energy than producing primary aluminium.
Good Recovery Value: Clean and properly sorted UBC scrap is a widely traded recyclable material.
Easy to Process: Baled and sorted UBC scrap can be efficiently transported and processed by recycling facilities.
Strong Industrial Demand: Used as feedstock for aluminium sheet, ingot, and other aluminium products.
Environmentally Beneficial: Supports resource conservation and reduces the need for primary aluminium production.

Used rail scrap for ferrous recycling and steel reprocessing. Price varies widely by grade, condition, and bulk size.

Advantages
High Steel Content: Provides valuable ferrous material for steel production.
Strong & Durable: Railway rails are manufactured from high-strength steel, making them suitable for recycling.
Recyclable: Can be melted and reused in the production of new steel products.
Cost-Effective: Offers an economical alternative source of ferrous raw material.
Industrial Demand: Used by steel mills, foundries, and metal recycling facilities.
Reduced Waste: Recycling used rails helps recover valuable metal and reduces landfill disposal.

Clean copper wire scrap with high recovery value, based on Melbourne market scrap ranges. Suitable for recycling and remelting.

Clean Copper Wire Scrap- Advantages
High Copper Recovery: Clean, unalloyed copper wire scrap offers excellent recoverable copper content.
High Conductivity: Recycled copper retains the excellent electrical and thermal conductivity associated with copper.
Cost-Effective Raw Material: Provides manufacturers and recyclers with a valuable secondary source of copper.
Recyclable: Copper can be recycled repeatedly without significant loss of its essential properties.
Wide Industrial Demand: Used as a raw material for producing copper rods, wires, cables, tubes, and other copper products.
Easy Processing: Clean wire with minimal contamination can be efficiently sorted, processed, and recycled.
Environmentally Beneficial: Recycling copper reduces the need for primary mining and can lower energy consumption compared with producing copper from virgin ore.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines.

Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Primary aluminium ingots for casting, manufacturing, and industrial supply.

Advantages
High Strength-to-Weight Ratio: Lightweight while providing good mechanical strength.
Excellent Corrosion Resistance: Naturally forms a protective oxide layer that helps resist corrosion.
Good Conductivity: Suitable for electrical and thermal applications.
Excellent Castability: Can be efficiently melted, cast, extruded, and fabricated.
Highly Recyclable: Aluminium can be recycled repeatedly while retaining its essential properties.
Wide Industrial Demand: Used extensively in automotive components, construction products, electrical equipment, machinery, and packaging.
Export-Friendly: Available in different alloy grades and ingot sizes according to buyer requirements.

Heavy melting steel HMS or heavy melting scrap is broken up into two major categories HMS 1 and HMS 2 where HMS 1 does not contain galvanized and blackened steel whereas HMS 2 does HMS is typically traded as a blend of 1 and 2 either a premium blend 8020 or lower grade mixes 7030 and 6040 For example HMS 1 and 2 8020 should consist of HMS 1 and 2 in the ratio of 80 HMS 1 and 20 HMS 2

Each grade guarantees a minimum piece thickness at least 14 inch 63 mm for HMS 1 and 18 in for HMS 2

HMS 1 and 2 specifications as defined by ISRI North Americas Institute of Scrap Recycling Industries

ISRI SPEC 200 HMS 1 Wrought iron andor steel scrap 14 inch and larger in thickness All pieces must be smaller than 6024 in
ISRI SPEC 201 HMS 1 Same as ISRI 200 except pieces must be smaller than 3618 in
ISRI SPEC 202 HMS 1 Same as ISRI 200 except pieces must be smaller than 6018 in
ISRI SPEC 203 HMS 2 Wrought iron andor steel scrap black and galvanized 18 inch and larger in thickness
ISRI SPEC 204 HMS 2 Same as ISRI 203 except pieces must be smaller than 3618 in
ISRI SPEC 205 HMS 2 Same as ISRI 204 except it may contain automotive scrap except for thin guage material
ISRI SPEC 206 HMS 2 Same as ISRI 205 except pieces must be smaller than 6018 in

Coltan (Columbite-Tantalite Concentrate)

We hereby wish to confirm with full legal responsibility, under the penalty of perjury, that we are the principal sellers of the commodity with its specifications mentioned below. We are ready to offer 100 MT at a competent price.

We are Ready, Willing and Able to offer high purity Coltan (Columbite-Tantalite Concentrate) with below specifications:

TECHNICAL CHEMICAL COMPOSITION:
A. Purity
Coltan (Columbite-Tantalite Concentrate) TaO 38%,
Niobium Pentoxide NbO 15%

B. Impurity Limits
W 0.5%, Sb 0.005%, Cu 0.2%, P 0.5%


C. Radioactive Compliance
The activity concentration of radionuclides (K) are within Chinese import standards with:
Any nuclide in the¸U, Ra, or Th decay chain 1 Bq/g10 Bq/g


SPECIFICATIONS
Commodity : Coltan (Columbite-Tantalite Concentrate)
Purity : 38% Tantalum Pentoxide (TaO)
Trial Quantity : 100 MT (One Hundred Metric Tons)
Contract Quantity:To Be Established After Trial Order
Origin : Rwanda
Incoterms : CIF/FCR
Form : Dry, free-flowing granules, be free of oil, waste, or foreign materials.
Packaging : Metallic Drums
Markings : Batch number, TaO/NbO content, gross/net weight
Granulometry : 2 mm maximum
Destination : AWSP
Inspection : Independent International laboratory i.e Alex Stewart, CCIC, Bureau Veritas, SGS or other
inspection company)
Price : 1.2 USD Per Kilogram calculated on purity %
Payment Terms: TT with full payment at the destination warehouse

NOTE: If TaO < 30% and NbO < 15%, the buyer reserves the right to reject the whole shipment or renego-tiate price.

EXPORT DOCUMENTS

- Certificate of Origin/Export Permit;
- Assay Report of Quality;
- Commercial Invoice;
- Packing List;
- Certificate of non-radiation;
- Ownership Certificate;
- CIGLR Certificate for conformity;
- T1 Release Order
- Air Waybill

We hereby wish to confirm with full legal responsibility under the penalty of perjury that we are the principal sellers of the commodity with its specifications mentioned below We are ready to offer 5000 MT at a competent cost

We are Ready Willing and Able to Grade A Copper Cathode of CATH Standard with below specifications

Commodity A Grade Electrolytic Copper Cathode
Purity 9999 Cu
Minimum Quantity 1000 MT One Thousand Metric Tons
Contract Quantity To BE Established
Origin Democratic Republic of Congo
Incoterms CIF Any safe world port
Shape LME Standard 914mm x 914mm x 12mm
Packing Palletized aluminum banded
Weight per sheet 125kg 1
Net weight per pallet 25 Metric Tons 1
Material To be free from contamination by radiation
Destination AWSP
Inspection Quality Quantity SGS or other inspection company
Price 25 Less LME
Payment Terms MT103 TT with FINAL payment at the destination warehouse

QUALITY CHEMICAL COMPOSITION

Element Value StandardSpecification
Copper Min 9999 ASTM B115 Grade 1 EN 1978
Silver Ag 005 BS EN 1978
Iron Feppm 001 ASTM B115 BS EN 1978
Sulfur Sppm 001 BS EN 1978
Oxygen O2ppm NIL ASTM B115
Lead Pbppm 0005 ASTM B115
Nickel Nippm 0005 ASTM B115
Arsenic Asppm0002 ASTM B115

EXPORT DOCUMENTS

Certificate of OriginExport Permit
Assay Report of Quality
Commercial Invoice
Packing List
Certificate of nonradiation
Ownership Certificate
CIGLR Certificate for conformity
Bill of Lading

Manganese

Manganese

High-quality, best-grade Aluminum UBC Scrap, derived from used beverage containers, such as soda and beer cans. Our scrap is carefully sorted and processed to ensure maximum aluminum content.

Key Features:

- Aluminum Content: 99.7%-99.99%
- Clean and Sorted: Free of contaminants, such as steel, copper, lead, foil, glass, organic material, and other non-aluminum materials
- UBC Material: Derived from used beverage containers (Soda and beer cans)
- Competitive Pricing: We offer competitive pricing

Applications:

- Aluminum Recycling: Ideal for recycling into new aluminum products
- Manufacturing: Suitable for manufacturing various aluminum products, such as foil, sheet, ingots and extrusions
- Aerospace: Can be used in the production of aerospace components

If you're interested in purchasing High quality Aluminum UBC Scrap, please don't hesitate to contact us to provide you with a customized quote and answer any questions you may have.

Why Sell Your Used Motors and Parts to Us?
Top Market Rates: As the best motor scrap dealers, we provide competitive prices for a used electric motor recycling machine and its parts for sale based on current market trends and material quality. Whether you're selling a single motor or bulk quantities, we ensure maximum returns.
Hassle-Free Collection: Disposing of heavy and bulky items like motors and parts is easy with our reliable pickup service. Covering all areas across the UAE, we handle all logistics, making us the preferred choice for those seeking machinery scrap dealers or looking to sell motor scrap.
Eco-Friendly Recycling: Recycling used motors and parts reduces waste and minimizes the demand for new raw materials, conserving resources and lowering environmental impact. By working with trusted scrap buyers in Dubai, you contribute to sustainable recycling while earning money for your scrap.

Copper Wire Scrap Mill-Berry is high-quality, 99.9% pure copper scrap sourced from recycled copper wires. This type of scrap is widely used in various industries, including electrical, construction, and manufacturing, due to its excellent conductivity, durability, and recyclability. It is free from coatings, insulation, and impurities, making it ideal for remelting and reuse in different applications.

Specifications
Material: 99.9% Pure Copper
Type: Millberry Copper Wire Scrap
Appearance: Clean, Bright, and Shiny
Wire Diameter: 0.2mm - 2.5mm
Length: Various Sizes Available
Impurity Content: Free from Insulation, Coatings, or Other Metals
Packaging: Bales or Rolls
Application: Electrical Wiring, Conductors, Busbars, Transformers, and More

Below is the cpu scrap types we offer

Intel 486 & 386 Cpu
Intel I960 & Motorola Cpu
Intel Pentium Pro Cpu
AMD 486 & 586 Cpu
Gold Top Cpu
Gold Top & Bottom Cpu
Intel Pentium 1
DLP Cpu
Gold cap cpu pins

Density 283gcm3 0102lb in3 at 20 C 68F
Annealing temperature 415 C 775 F
Solution temperature 475 C 890 F
Aging temperature 120175 C 250350 F

The main alloy element of 7075 system aluminum alloy is zinc Adding magnesium to the alloy containing 3 75 zinc can form mgzn2 with remarkable strengthening effect which makes the heat treatment effect of the alloy much better than that of aluminum zinc binary alloy If the content of zinc and magnesium in the alloy is increased the tensile hardness will be further improved but its resistance to stress corrosion and exfoliation corrosion will be reduced After heat treatment it can reach very high level The material of this series is made of 70757651 aluminum alloy which is known as the best product in aluminum alloy It has high strength and is far superior to mild steel This alloy has good mechanical properties and anode reaction It is mainly used in aerospace mold processing mechanical equipment tooling and fixture especially for aircraft manufacturing structure and other products with high strength and resistance High stress structure with strong corrosion resistance

Provide sample Yes
Payment terms TT LC
Price term FOB CFR CIF TT
Alloy or Not Yes
MOQ 500kg
Production Capacity 100000 SqmMonth
Color Siver White