Find Verified Coconut Based Snacks Suppliers, Manufacturers and Wholesalers

Base oils are important basic raw materials for any lubricants included engine oils, gear oils, industrial oils, metal working fluids, hydraulic fluids and also greases. In most of the lubricants 70-90% ingredient is base oils. As per API classification Base oils can be grouped majorly into five groups, i.e., Group-I/II/III/IV/V. The base oil characteristics are very important in determining the quality of the finished product. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.

Base Oil SN 350 is a medium stock base oil produced from the vacuum distillates and residual components using the traditional refining methods. It has viscosity 8-9,5 cSt at 100C and 67-70 cSt at 40C. SN 350 is used in lubricant and lubricant additives production, mainly for industrial applications. The main benefits of SN 350 base oils are low sulphur content, high viscosity index, high oxidation stability and good susceptibility to the additives.

Base oil SN 150 is known as a light grade base oil at the lower end of the specifications for Grade I light base oils. It is mostly used in lubricant and lubricant additives production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities.

Applications :
Base oil SN 150 works as a base stock for several industrial lubricants.

General purpose oils
Mould oil
Transmission fluids
Gear oils
Metal working fluids
Additives
Hydraulic oils
Transformer oils

Base Oil SN 500 is defined as a light-grade base oil at the upper end of the specifications for Grade I base oils. It is mostly used in lubricant production. It is a Group I base oil that has undergone solvent refining processes. To finish the refining it was hydrogen-treated to clear out any impurities.

Applications :
Base Oil SN 500 works as a base stock for several industrial lubricants

Engine oils
Transmission fluids
Gear oils
Metal working fluids
Greases
Hydraulic oils
Transformer oils

Product Name:

Colorful Roasted Cashews

Product Code PM48
The selling points NON-GMO,No food color.free from frying,Good for eyesight.
The products are sold in: Asia
Percent of cashews: 40%
Breakage rate: 5%
Ingredients: Cashews, modified corn starch, wheat flour, corn starch, sugar, soy sauce, salt, colors
Main process: selecting,roasting,seasoning selecting & metal detection,and packaging in the GMP plant.
Key point:
CCP :Selecting and metal detection

Allergens handled on site: Peanut product, soybean, nut, cereals containing gluten and products thereof,sesame,mustard,sulphur dioxide and sulphite.
Flavor: Delicious flavor
Texture: Very Crispy
Shelf Life: 12 month
Quality standard: NON-GMO,EU Market
FDA No.: 15315764210
HS CODE: 19041 00000
NON GMO Yes
Certificate: BRC; HACCP(ISO2200);ISO9001
BRC Certificate: Audited by SGS with B grade
Organic No
Inner package: 6kg x2bag/CTN, Aluminium foil pack bag
Out package: 12KG/ctn,Double wall,Yellow color
Gross weight: 12.6KG/ctn
CBM(M�³) : 0.03=0.38*0.28*0.28m
Quantity:20'/40'/40HQ 980/2020/2310ctns
OEM: Available.
MOQ One 20'F container
Delivery Time: within 30 days (to the loading port:Shanghai,China )
Payment Terms: T/T,L/C
Samples: Available
Documents:
1. Certificate of Origin .

2. Phytosanitary Certificate

3.Health Certificate

4. Microbilogical Analysis certificate

5. Description of Ingredients

6. COMMERCIAL INVOICE

7. PACKING LIST

8. bill of lading (B/L)

Supply Ability: 1200 Metric Ton per month
Quantity of employees around 850


Recommended Cashew Nuts



1) Spicy Flavor Roasted Cashews

Soaps and detergents: Used in the manufacture of oil-based toilet soaps
Methyl ester
Biodiesel
Fatty alcohol
Anti-caking agents
Animal feeds
Cosmetics
Soluble soaps
Liquid pharmaceutical and personal care products
Chemical intermediates and derivatives

Uzima Virgin Coconut Oil

This is COCOVITA’s premier , unrefined ( Raw) and 100% natural coconut oil brand handcrafted by committed and hardworking local women out of very carefully selected fresh chemical free grown coconuts in the remote villages of the Kenyan tropical coast . It is produced using the old agetraditional low tech milling method called fermentation. No detail is spared to ensure that only the highest quality of raw and 100% coconut virgin oil is delivered to you packed with all the antioxidants that your body requires.

What is Uzima Virgin Coconut oil made up of:

Saturated fatty acids: Most of them are medium chain triglycerides, which are supposed to assimilate well in the body's systems. Lauric acid is the chief contributor, representing more than forty percent of the total, followed by capric acid and caprylic acid. Lauric acid is converted by the human body to monolaurin which is helpful in dealing with viruses and bacteria that cause diseases such as herpes, inf luenza, cytomegalovirus, and even HIV. It also helps in fighting harmful bacteria such as listeria monocytogenes and helicobacter pylori, and harmful protozoa such as giardia lamblia.
Polyunsaturated fatty acids: Linoleic acid.
Monounsaturated fatty acids: Oleic acid.
Poly-phenols-Act as antioxidants: Coconut contains Gallic acid, which is also known as phenolic acid. These polyphenols are responsible for the fragrance and the taste of coconut oil. Vitamin E, vitamin K and minerals such as iron.
How Much Virgin Coconut Oil Should One Take
It is recommended to begin taking virgin coconut oil gradually. One can start with one table spoon daily slowly increasing the dosage depending on their weight and how comfortable they are with the dosage.

White Refined Sugar- Icumsa 45 Rbu Shall Conform To The Following Specifications. The Sugar Being Supplied Is 100% Fit For Human Consumption.

Specifications:

Icumsa : 45 Rbu Icumsa
Attenuation Index Units Method # 10-1978
Ash Content : 0.04% Maximum By Weight
Moisture : 0.04% Maximum By Weight
Magnetic Particles : Mg/kg 4
Solubility : 100% Dry & Free Flowing
Granulatio : Fine Standard
Polarization : 99.80 Minimum
Max As : 1 P.p.m.
Max Os : 2 P.p.m.
Max Cu : 3 P.p.m.
Colour : Sparkling White
Sediments : None
So : Mg/kg 20
Reducing Sugar : 0.010% Maximum In Dry Mass
Radiation : Normal W/o Presence Of Cesium Or Iodine So2: Certified
Substance : Solid, Crystal
Smell : Free Of Any Smell
Hpn Staph Aureus : Per 1 Gram Nil
Microbiological Limits : Pathogenic Bacteria Including Salmonella Per 1 Gram Nil Bacillus Per 1 Gram Nil
Pesticide Traces : Maximum Mg/kg Basis Ddt 0.005 Photoxin 0.01 Hexachloran Gamma Isomer 0.005
Crop : 2013 Or More Recent Crop
Phytosanitary Certificate Of No Radiation, No Virus, No Insect Parts, No Rodent Excrement, No Husks And No Poisonous Matter. Product Is Suitable For Human Consumption

Professional Sales Team Able To Communicate In The Following Languages: Chinese, English, Dutch, French, German, Japanese, Korean, Portuguese, Spanish And Russian And We Do Ship Our Goods Via Sea, Air And Land Via Truck
Quality Assurance.
Traceablility.
Fast Delivery At Your Request.

Premium Quality Organic Coconut Sugar
Our Coconut Sugar Is Made Of The Nectar Of Coconut Palm Tree (cocos Nucifera) Blossoms. It Is A Wholesome Alternative Sweetener That Can Be Used In Many Recipes As A One-to-one Replacement For White Sugar Or Brown Sugar. The Mellow Caramel Flavor Is Perfect For Cookies, Cakes And Breads. For A Delicious Breakfast, Top Your Outmeal With A Spoonfull Of Coconut Sugar. Its Delicious.

Commodity: soybeans oil
We offer optimum Soy beans Oil that is widely used in various applications like food and medicine. We produce our Soy beans Oil from natural coconuts at our sophisticated production facility.
It offers great heat-stability and slow oxidation which in turns provide resistivity against rancidity.

Raw cashew nuts for processing and kernel production.

Advantages
High Processing Value: Raw cashew nuts are an important input for the production of premium cashew kernels.
Strong Global Demand: Cashews are widely consumed in food, confectionery, bakery, snack, and food-processing industries.
Versatile Applications: Processed kernels can be used in snacks, sweets, nut butters, dairy alternatives, and various culinary products.
Longer Storage Potential: Properly dried and stored RCN can be maintained for processing over an appropriate period.
Export Commodity: Raw cashew nuts are widely traded between producing regions and international processing markets.
Value Addition: Processing creates multiple grades and sizes of kernels, offering opportunities across different market segments.

Capron Eco Magnatec is a four-season gasoline engine
oil produced with mineral base oil and good-quality
additives which features proper anti-rust and anti-corrosion properties.

Capron Eco Magnatec is a four-season gasoline engine
oil produced with mineral base oil and good-quality
additives which features proper anti-rust and anti-corrosion
properties.

Our Avocado & Coconut soap combines the nourishing qualities of avocado oil with the cleansing and creamy-lathering properties of coconut oil. Avocado oil helps give the skin a soft, conditioned feel, while coconut oil contributes to a rich, creamy lather and effective cleansing. Together, they make a refreshing handcrafted soap that leaves the skin feeling clean, smooth and comfortable.

Capron Eco Magnatec is a four-season gasoline engine
oil produced with mineral base oil and good-quality
additives which features proper anti-rust and anti-corrosion
properties.

Capron Eco Magnatec is a four-season gasoline engine
oil produced with mineral base oil and good-quality
additives which features proper anti-rust and anti-corrosion
properties.

This bitumen is primarily used for the construction of extra-heavy bitumen pavements that have to bear significant traffic loads. Bitumen VG30 is the most widely used type of bitumen in road construction, insulation, building construction industries, and also in the production of cutback bitumen. it is better to know that this vg30 bitumen can be used instead of 60/70 penetration bitumen grade.

VG40 bitumen is used in areas in which high pressure comes from heavy traffic loads, such as intersections, near tolls booths, and truck parking lots.

Due to the high viscosity of this bitumen, it is more appropriate for improving resistance to shoving and other problems associated with higher temperatures and heavy traffic loads. It's long time that industries use vg-40 instead of the penetration grade bitumen 40/50.

VG10 bitumen is the softest grade of viscosity bitumen. This type of bitumen is widely used for spraying applications and surface coating.

VG 10 bitumen means that your bitumen is also suitable for paving roads in a very cold climate instead of the old 80/100 penetration grade. The air temperature that matches VG10 bitumen ranges from -10 C to 25 C.

Due to the high temperatures in hot climatic zones, the application of VG10 cannot provide desirable rutting resistance.

This type of bitumen is also used to manufacture bitumen emulsions and modified bitumen products especially in India.

As a viscosity grade bitumen, VG10 has a better performance incold weather. To know vg10 latest price contact us.

Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair conjointly for the production of asphalt pavements with below technical specifications. This grade of bitumen is mainly used in the manufacture of hot combine asphalt for bases and wearing courses. Bitumen 60/70 is the most used bitumen grade and basic material for all alternative bituminous products.

Bitumen Penetration Grade 60/70 is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by RAHA GROUP is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by RAHA GROUP is produced from vacuum residue (short residue) feedstock.

RAHA Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

Bitumen Penetration Grade 85/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 85 to 100.

Penetration Grade bitumens are specified by the penetration and softening point test. The designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

The Bitumen mode is dependent on temperature. The temperature-vs-stiffness relationship of bitumen is dependent on the type of crude oil and its refining method. Bitumen penetration grade 85/100 is semi hard penetration grade bitumen used as a paving grade bitumen which is suitable for road construction and repair. It is also used for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacturing of hot mix asphalt for bases and wearing courses. Bitumen 85/100 is one of the most used bitumen grades and a basic material for all other bituminous products.

Penetration determines the hardness of bitumen by measuring the depth to which a standard loaded the needle will vertically penetrate in 5 seconds, in a sample of bitumen maintained at a temperature of 25 degrees Celsius.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Urea 46%, also known as urea fertilizer, is a commonly used nitrogen fertilizer and animal feed additive in the agricultural industry. This white crystalline solid is highly soluble in water, making it easy to apply to crops. Urea 46% provides plants with an essential source of nitrogen, which is crucial for their growth and development. However, like any agricultural input, urea 46% has its pros and cons. In this blog, we will explore the composition, production process, and practical applications of urea 46%, as well as its potential drawbacks and best practices for farmers. By understanding the benefits and limitations of urea 46%, farmers can maximize its potential and optimize crop production while minimizing environmental impact.

Capron Magnatec Plus is a premium-quality four-season gasoline engine oil produced with semi-synthetic base oil and high-quality additives that features excellent anti-rust and anti-corrosion properties.

Engine Oil 10W-40 is a multi-grade lubricant formulated to provide reliable engine protection across a wide range of operating temperatures. It helps reduce friction and wear, maintain engine cleanliness, and support smooth engine performance. It is commonly used in passenger cars, commercial vehicles, motorcycles, and other compatible gasoline or diesel engines, depending on the formulation and OEM requirements.

Advantages
Excellent protection against engine wear
Good cold-start performance
Maintains viscosity at high operating temperatures
Helps reduce sludge and deposit formation
Supports smooth and efficient engine operation
Good oxidation and thermal stability
Suitable for a variety of automotive applications

Pure sulfuric acid does not occur naturally due to its strong affinity to water vapor; it is hygroscopic and readily absorbs water vapor from the air. Concentrated sulfuric acid is highly corrosive towards other materials, from rocks to metals, since it is an oxidant with powerful dehydrating properties. Phosphorus pentoxide is a notable exception in that it is not dehydrated by sulfuric acid but, to the contrary, dehydrates sulfuric acid to sulfur trioxide. Upon addition of sulfuric acid to water, a considerable amount of heat is released; thus, the reverse procedure of adding water to the acid should not be performed since the heat released may boil the solution, spraying droplets of hot acid during the process. Upon contact with body tissue, sulfuric acid can cause severe acidic chemical burns and even secondary thermal burns due to dehydration. Dilute sulfuric acid is substantially less hazardous without the oxidative and dehydrating properties; however, it should still be handled with care for its acidity.

VG-20 bitumen is a grade of viscosity bitumen used in cold climatic and high altitude regions. This grade of bitumen is suitable for road construction in regions with 30 to 37 C average temperature.

In North India, vg20 is used for road construction in hot mix asphalt. The standard penetration value of bitumen viscosity grade VG-20 is 60 mm at 25 C. The absolute viscosity of VG-20 bitumen is 1600 to 2400 poise at 60 C.

Bitumen penetration grade 40/50 bitumen means the penetration value is in the range 40 to 50 at standard test conditions which commonly used as a Paving Grade. Bitumen is applicable for the production of hot mix asphalt for bases and pavements and for road construction. Penetration Grade Bitumen supplied by RABIT (RAHA BITUMEN) Co. This bitumen is produced through aeration on vacuum bottom (the raw material used for making bitumen left in vacuum distillation column in oil refineries) in bitumen production units. Its penetration grade ( the measure of bitumen hardness) is between 40 to 50. Bitumen is specified by the penetration and softening point test. Designing is by penetration range only. The penetration grade bitumen has a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature-viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen.

Prilled urea is a form of nitrogen-rich solid fertilizer that has the ability to dissolve quickly in water.

Prilled urea is more commonly used today to resist breaking down when mixing with other fertilizer components like Potassium chloride.

It is also known as ice melting or deicing urea since it can reduce ice efficiently, even at very low temperatures.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines.

Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

With regards...
We are proud to announce to you that we are the largest producer of powdered milk powder in various grades...
We have the possibility of supplying to the order of our dear customers...
We export more than 1000 tons per month to African and Central Asian countries...
Experience the quality and the right price with us....

Clean copper wire scrap with high recovery value, based on Melbourne market scrap ranges. Suitable for recycling and remelting.

Clean Copper Wire Scrap- Advantages
High Copper Recovery: Clean, unalloyed copper wire scrap offers excellent recoverable copper content.
High Conductivity: Recycled copper retains the excellent electrical and thermal conductivity associated with copper.
Cost-Effective Raw Material: Provides manufacturers and recyclers with a valuable secondary source of copper.
Recyclable: Copper can be recycled repeatedly without significant loss of its essential properties.
Wide Industrial Demand: Used as a raw material for producing copper rods, wires, cables, tubes, and other copper products.
Easy Processing: Clean wire with minimal contamination can be efficiently sorted, processed, and recycled.
Environmentally Beneficial: Recycling copper reduces the need for primary mining and can lower energy consumption compared with producing copper from virgin ore.

We are suppliers of BEST QUALITY Kenyan White Kidney Beans and looking for serious buyers in need of our products, contact with us for more details.

White kidney beans, also known as cannellini beans, are large, creamy white beans with a mild flavor and smooth, creamy texture.
They are a popular ingredient in various cuisines around the world.
These beans are highly nutritious, providing plant-based protein, dietary fiber, complex carbohydrates, and essential minerals.
White kidney beans are commonly used in soups, stews, chili, salads, and dips.
They can be cooked and enjoyed on their own or used as a versatile ingredient in a wide range of dishes.

Product name: Light Speckled Kidney Beans
Year of production: New crop
Origin: Germany
H.P.S
Size: 190-210pcs/100g / 210-230pcs/100g
Moisture: 16.5%max
Admixture: 0.2% max
Imperfect Grains: 3% max
Packing: 25kg or 50kg P.P.bags / 1 metric ton big bags / in bulk in
container
Minimum Order Quantity: 24 Metric Ton
Delivery Time: Within 30days After signing the contract
Payment : NEGOTIABLE

Commodity: black beans

Kidney beans, also known as black beans, are a type of legume that is commonly used in Latin American and Caribbean cuisine.
They are high in protein, fiber, and a variety of vitamins and minerals.
Black beans have a dark, almost black outer skin, and a creamy, white interior.
They have a slightly sweet, nutty flavor and a tender texture.
They can be cooked and used in a variety of dishes, including soups, stews, salads, and side dishes.
Some of the health benefits of black beans include:
* High in fiber: Black beans are an excellent source of dietary fiber, which can help regulate digestion and prevent constipation.
* Good source of protein: Black beans are a good plant-based source of protein, making them a great option for vegetarians and vegans.
* Rich in antioxidants: Black beans contain antioxidants that can help protect the body against damage from free radicals.
* Low glycemic index: Black beans have a low glycemic index, which means they are digested slowly and can help regulate blood sugar levels.
Overall, black beans are a nutritious and versatile food that can be incorporated into a healthy diet in a variety of ways.

Kenyan company exporters of black ctc tea, green tea, oolong tea, purple tea, orthodox tea based in Mombasa Kenya. We source our teas from Mombasa largest tea Auction in the world and directly from producers from Kenya, Tanzania, Uganda, Rwanda, Burundi, DRC Congo, Madagascar and Ethiopia. We export teas in bulk where by the minimum quantity is 20ft container which carries 12,000kgs or 12 tonnes and 40ft container which carries 26,500kg or 26.5 tonnes We we do pack 5g, 10g, and 20g, 50g 100g, 125g, 250g, 500g, 1kg, and 5kg in foiled aluminium pouches then repacked in master cartons, then 10kg,20kgs,25kgs in foiled bags with strong handles, all these packaging are available for supermarkets and stores shelves. We can also pack as per clients requirements including their own (LOGO) Design and do request clients to provide us with their desired designs after the approval of the samples.Kindly find attached some of our range of products. Therefore we request your good office to provide us with your company physical full addresses for us to forward our Tea samples for your approval

Fresh Strawberry
Top-grade fresh strawberries for direct consumption and culinary use.
Dried Strawberry
Delicious dried strawberries, perfect for snacks and baking ingredients.
Frozen Strawberry
IQF frozen strawberries for smoothies, desserts, and food processing.
Strawberry Juice
Freshly extracted strawberry juice for beverage applications.
Strawberry Paste and Puree
High-quality paste and puree used in sauces, desserts, and flavorings.
Strawberry Pulp
Natural strawberry pulp for use in dairy, bakery and drink products.
Value-Added Strawberry
Processed strawberry products tailored for various customer needs.
Other Processed Strawberry
Assortment of strawberry-based goods including jams and concentrates.
Categories
Strawberry
Agriculture - Food - Beverage
Fresh Fruits
Other Processed Strawberry
Fresh Strawberry
Dried Strawberry
Strawberry Paste and Puree
Frozen Strawberry
Value-Added Strawberry
Strawberry Juice
Strawberry Pulp

Cashew Nut
Cultivation Type:
Common
Processing Type:
Blanched
Style:
Dried
Grade:
WW320
Use:
Healthy Snacks
Place of Origin:
KENYA

We supply a wide selection of premium fresh-cut summer flowers suitable for bouquets, floral arrangements, weddings, retail flower shops, and wholesale distribution. Our flowers are grown under carefully managed conditions and harvested at peak freshness to ensure superior quality and extended vase life.

Our summer flower range may include varieties such as alstroemeria, statice, solidago, asters, chrysanthemums,Gypsos,Eryngiums,Asparagus and other seasonal flowers, depending on availability. Each stem is carefully graded for size, color, and quality before packing.

Product Features:

Fresh-cut, export-quality flowers
Bright colors and healthy blooms
Long-lasting freshness
Suitable for wholesale, retail, and floral design
Available in mixed or single-variety orders

Packaging:

Export-standard cartons
Customized bunch sizes and packaging options
Cold-chain handling to preserve quality during transit

We are committed to delivering consistent quality, reliable supply, and timely shipments to customers worldwide. Customized orders based on buyer specifications are welcome.

, We are pleased to introduce to you as Kenyan company exporters of black, ctc tea, green tea, oolong tea, purple tea, orthodox tea based in, Mombasa Kenya. We source our teas from Mombasa largest tea Auction in, the world and directly from producers from Kenya, Tanzania, Uganda,, Rwanda, Burundi, DRC Congo, Madagascar and Ethiopia., We export teas in bulk where by the minimum quantity is 20ft container, which carries 12, 000kgs or 12 tonnes and 40ft container which carries, 26, 500kg or 26.5 tonnes, We we do pack 5g, 10g, and 20g, 50g 100g, 125g, 250g, 500g, 1kg, and 5kg, in foiled aluminium pouches then repacked in master cartons, then, 10kg, 20kgs, 25kgs in foiled bags with strong handles, all these, packaging are available for supermarkets and stores shelves., We can also pack as per clients requirements including their own (LOGO), Design and do request clients to provide us with their desired designs, after the approval of the samples.Kindly find attached some of our range, of products., Therefore we request your good office to provide us with your company, physical full addresses for us to forward our Tea samples for your,

, We are pleased to introduce to you as Kenyan company exporters of black, ctc tea, green tea, oolong tea, purple tea, orthodox tea based in, Mombasa Kenya. We source our teas from Mombasa largest tea Auction in, the world and directly from producers from Kenya, Tanzania, Uganda,, Rwanda, Burundi, DRC Congo, Madagascar and Ethiopia., We export teas in bulk where by the minimum quantity is 20ft container, which carries 12, 000kgs or 12 tonnes and 40ft container which carries, 26, 500kg or 26.5 tonnes, We we do pack 5g, 10g, and 20g, 50g 100g, 125g, 250g, 500g, 1kg, and 5kg, in foiled aluminium pouches then repacked in master cartons, then, 10kg, 20kgs, 25kgs in foiled bags with strong handles, all these, packaging are available for supermarkets and stores shelves., We can also pack as per clients requirements including their own (LOGO), Design and do request clients to provide us with their desired designs, after the approval of the samples.Kindly find attached some of our range, of products., Therefore we request your good office to provide us with your company, physical full addresses for us to forward our Tea samples for your,

, We are pleased to introduce to you as Kenyan company exporters of black, ctc tea, green tea, oolong tea, purple tea, orthodox tea based in, Mombasa Kenya. We source our teas from Mombasa largest tea Auction in, the world and directly from producers from Kenya, Tanzania, Uganda,, Rwanda, Burundi, DRC Congo, Madagascar and Ethiopia., We export teas in bulk where by the minimum quantity is 20ft container, which carries 12, 000kgs or 12 tonnes and 40ft container which carries, 26, 500kg or 26.5 tonnes, We we do pack 5g, 10g, and 20g, 50g 100g, 125g, 250g, 500g, 1kg, and 5kg, in foiled aluminium pouches then repacked in master cartons, then, 10kg, 20kgs, 25kgs in foiled bags with strong handles, all these, packaging are available for supermarkets and stores shelves., We can also pack as per clients requirements including their own (LOGO), Design and do request clients to provide us with their desired designs, after the approval of the samples.Kindly find attached some of our range, of products., Therefore we request your good office to provide us with your company, physical full addresses for us to forward our Tea samples for your,

Cultivation Type:
Organic
Processing Type:
Roasted
Style:
Dried
Packaging:
Bag, Box, Carton
Grade:
A
Use:
Snack, Direct Consumption
Place of Origin:
KENYA
Model Number:
N/A

Cashew Nut
Cultivation Type:
Organic
Processing Type:
Roasted
Style:
Dried
Packaging:
Box, Carton
Grade:
A
Use:
Snack, Direct Consumption
Place of Origin:
Kenya
Model Number:
N/A

Bananas are extremely healthy and delicious. They contain several essential nutrients and provide benefits for digestion, heart
health and weight loss. Aside from being very nutritious, they are also a highly convenient snack food.

TECHNICAL SPECIFICATIONS
Product Type: Anti-wear hydraulic oil
Technology: Zinc-based (ZDDP) additive system
ISO Viscosity Grades: HM 32, HM 46, HM 68
Standards & Approvals: DIN 51524 Part 2 (HLP) ISO 11158 (HM)
Oxidation Stability: High
Water Separation: Good
Rust & Corrosion Protection: Excellent
Application Environment: Industrial and mobile hydraulic systems

It creates water-resistant and durable feed pellets. These pellets ensure feed stability in water for 2-6 hours, depending on formulation ingredients, mesh size, and processing conditions.

This versatile product is widely used in construction, art, and medical applications, offering excellent workability and setting properties.

These compounds are utilized in various applications such as dam sealing, construction, and other industrial uses.