A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing
We offer first grade galvanized Iron Billets manufactured in Saudi Arabia in the year 2021. The price shown is the minimum range of 300,000 Metric Tons per year including CIF to any seaport in the world. As the range goes up the prices go down as follows:
400,000 MT
500,000 MT
700,000 MT
900,000 MT
and 1,000,000 and more MT
---------------------------------------------
Please note that prices include VAT, the inner bank fees and all CIF expenses. Commercial Invoices are also included, but we would like the customer to pay it as a deposit that can be refunded after the Letter of Credit (bank guarantee, draft...) is issued.
---------------------------------------------
The prices shared are only for May 2021.
---------------------------------------------
Accepted LC: "Confirmed MT700 At Sight" & "MT705 through SWIFT"
---------------------------------------------
We offer Galvanized Rebar and Second Grade Railway as well. The manufacturer is one of the prominent Saudi Companies.
chemical composition % max
Trademark B-B:
C 0.003 Si 0.01 Mn 0.13 P 0.009 S 0.006 Cr 0.02 Ni 0.02 Al 0.03 Cu 0.02
Trademark B-BC:
C 0.002 Si 0.01 Mn 0.08 P 0.006 S 0.005 Cr 0.01 Ni 0.01 Al 0.01 Cu 0.01
Trademark B-CC:
C 0.002 Si 0.003 Mn 0.02 P 0.005 S 0.005 Cr 0.01 Ni 0.01 Al 0.005 Cu 0.004
Appliance of trademark from B-B to B-CC :
The raw material of all kinds precise alloy(super alloy),electric alloy,soft magnet,amorphous alloy and permanent magnet such as NdFeB etc.
We have available from the agent used rails + billet according to specifications and conditions We can provide any quantity required from the factory's agent directly and at very reasonable prices.
Bank to Bank only
The customer's financial ability via SWIFT only
We cannot make any offer until after the buyer's financial suitability
There are no down payments or fees
Prices start for used rails R50 R65 from $ 220 for quantities of 100 thousand tons and above
Prices start for billet iron from 450 dollars for quantities of 60 thousand tons and above ...
We have available from the agent used railroad rails + billet according to specifications and conditions We can provide any quantity required from the factory's agent directly and at very reasonable prices.
Bank to Bank only
The customer's financial ability via SWIFT only
We cannot make any offer until after the buyer's financial suitability
There are no down payments or fees
Prices start for used railroad rails from $ 220 for quantities of 100 thousand tons and above
Prices start for billet iron from 450 dollars for quantities of 60 thousand tons and above ...
1. Angles, Shapes And Sections Of Iron Or Non-alloy Steel.
2. Flat-rolled Products Of Iron Or Non-alloy Steel, Of A Width Of 600 Mm Or More, Hot Rolled, Not Clad, Plated Or Coated.
3. Bars And Rods, Hot-rolled, In Irregularly Wound Coils, Of Iron Or Non-alloy Steel
4. WIRE OF IRON OR NON-ALLOY STEEL
5. INGOTS
6. OTher Bars And Rods Of Iron Or Non-alloy Steel, Not Further Worked Than Forged, Hotrolled, Hot-drawn Or Hot-extruded, But Including Those Twisted After RollinG
We have a unique iron ore resource footprint with large, high-quality resource bases in South Africa and India. Demand for iron ore globally is largely dependent on the state of the steel industry worldwide and, more specifically, on that of the steel manufacturing sector in China. Brat supplies leading quality lump ore and also produces premium fine ore from the mines of its associate company in Goa, India.
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast.
steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m Quality : In various internationally well known standards including afnor (nf), aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. Astm a 615 gr 40 or 60, bst 420 s, din 488, st 37.2 din 17100, nfa 35015 and 16, bs 4449 (gr 250 or 460), jis g 3112 (sd 30, 35, 40), si 739 s 400, si 739 s 400 w, feb 44 k, 3 sp/ps or 5 sp/ps gost 380 88, 35 gs or 25 g2s, gost 5781-82, etc) Other grades available according to customer's request
STEEL BILLETS 3SP AND 5SP
ORIGIN : SAUDI ARABIA, QATAR, TANZANIA, INDIA, CHINA, MUSCAT
Steel billets of various dimensions available.
These are available in the following sizes (mm): 100X100 ; 120x120; 125x125; 130x130 ; 150x150S
Standard : JIS G3141, ASTM A653, GB, Ghos 380, BS 4449, EN 10025
Pig Iron comprises three main types: Basic Pig Iron, Foundry Pig Iron and Nuclear Pig iron. We supply compositions within fairly narrow ranges of specifications with the objective of optimizing customer's costs
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. Smaller and longer than a bloom, billets are usually a square cross-section less than 36 square inches.
They are used for the manufacture of all ‘long’ steel products such as bars, rods, pipes, tubes, wire and wire products.
HBI is a briquetted form of direct reduced iron with a high iron content (>90%). The chemical composition of the HBI we supply is consistent, with low levels of harmful impurities, such as phosphorus and sulphur. It is free from other harmful elements, such as copper, nickel, and any non-metallic compounds.
