Artisanal hand-braiding ensures a consistent and high-quality construction.
Each rope is unique, showcasing the natural variations in texture and color.
Made from the sustainably sourced and renewable fibers of the hyacinth plant.
Provides an eco-conscious alternative to synthetic ropes, aligning with environmentally friendly practices.
The inherent strength of hyacinth fibers makes the braided rope robust and resilient.
Suitable for a variety of applications where strength and durability are essential.
Color: natural.
Moisture: 8% max.
Diameter: 5-6mm, 10-12mm, 16-18 mm, 28-30 mm
Length: 100m, 200m.
Made from medium to long fiber.
100% natural, well cut, smooth surface.
Packaging: each roll is wrapped by straps.
Origin: Vietnam
Color: natural.
Moisture: 8% max.
Diameter: 4-6mm, 10-12mm, 16-18mm, 28-30mm and 58-60mm
Length: 100m, 200m.
Made from medium to long fiber.
100% natural, well cut, smooth surface.
Packaging: each roll is wrapped by straps.
Andritz S Pump and Spares S100-350 pump front lining is made of 1.4460 material, and S100-350 pump fields of application including mechanical pulp production, secondary fibres, board machine, biological waste water treatment, sugar industry, flue gas desulphurization, bio-ethanol treatment, chemical pulp etc.
Alternative Andritz S series single-stage process centrifugal pumps are available with closed, semi-open or open impellers. These wear-resistant pumps are suitable for working with a wide range of media. Depending on the type of impeller, they can transport contaminated liquids with amount of solids up to 8%. They are used as process pumps in paper, chemical, sugar, energy, food industries, water, sewage treatment, drainage or other systems.
FP Series Double Suction Fan Pump is a low pulse and high efficient paper pulp pump,It is new standards in terms of efficiency, flexibility, and design. This double-suction pump series was designed for flow rates up to 20,000 m/h and heads up to 220 m. The pumps can convey stock suspensions with consistencies of up to 2%. The fan pump supplied has a very high efficiency of 92% and lowest pulsation in order to guarantee perfect sheet formation.
FP Paper Pulp Pump is one kind of centrifugal single stage single suction paper pulp stock pump .it is widely used in such as paper making industry, pulp and paper, steel, chemical, food, sugar, or bioethanol industries .It can transport less than 6% concentration paper pulp, sewage water,chemicals or fine slurries etc.,and it can also transport the non-abrasion medium in other industries.
Design Features:
Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration.
Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation.
Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc
Shaft seal - Mechanical seals and packing seal can be used as per requested
Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)
20622A Gland Assembly for Mission 4x3x13 Mud Pumps.
offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
Frame Plate Liner Insert SP15041A05 is the main part of 150SV-SP Vertical Slurry Pump wet side. It works with the volute lining. The frame plate liner inserts and impellers are used to transport mud. And the frame plate has a replaceable wear-resistant metal lining plate or rubber lining plate.
are a professional slurry pump parts manufacturer, Slurry Pump spare parts are a maintenance requirement when operating slurry pumps, and can t be ignored. offer suitable replace spare parts for original slurry pump, including heavy duty slurry pumps AH (R), M (R), high head slurry pump HH, light duty slurry pump L (R), gravel pumps, vertical sump slurry pump, and froth pump. Tobee have different materials, such as high chrome pump parts, dual-phase steel slurry pump parts, slurry rubber pump spares, polyurethane pump spare parts, slurry pump ceramic sapres, etc.
Impeller SP10206 - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
Casing SP10092 - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Back Liner SP10041 - It forms a pump chamber with throat bush and volute liner where the slurry would flow through them, Tobee offers back liners are interchangeable with stardard pump back liners with high chrome, natural rubber, polyurethane for different working condition.
Vertical Sump Pump Parts:
Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones. The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered.
Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected.
Submerged Bearings - None
Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.
Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.
Rock bolts are commonly used in civil engineering and mining to reinforce and stabilize
rock masses. A rod or bar is inserted into a drilled hole, which is then grouted in place using
cement or resin. FRP Rock bolts withstand tensile forces and evenly distribute load,
eventually increasing overall strength. They control rock movements, reduce deformation
and prevent collapses.
