Find Verified Tools Instruments Suppliers, Manufacturers and Wholesalers

Cotton Cord Buff With Flat Surface

Instant inch/mm conversion
Zero the reading any position

Generates high pressure air, double the primary pressure without electric power. Contributes to energy savings of the plant by utilizing existing compressed air equipment to boost pressure in areas where it is needed. Long service life components reduce total cost of plant.

Compact modular design in which major boundary dimensions of devices such as filters, regulators, lubricators, etc., are unified.

INCLUDES:

Dual Levered Mount

User Manual

Quick Reference Guide

3 CR123 Batteries

Trijicon Logo Sticker

Shuttered Eye Guard

Download Card & Cable

Warranty Card

LENSPEN

Hard Case

Function:

Battery charge way

Stainless body and luxurious appearance

Extended working time by using lithium-ion battery

Prevent water flow back to machine by forcing pump

Minimize chemical in tank by forcing pump

Control chemical volume(Pump motor output control)

We are one of the leading factory of stainless steel gardening scissors. Our products are durable and very easy to use.

Specifications:
-Sharp Cutting
-Light Weight
-Durable

Performance:
Ten second Cat 6A test time contributes to the fastest way to gain certification
Graphically displays the source of failures including crosstalk and distance to shield faults for faster troubleshooting
Manage up to 12,000 test results with full graphics
Capacitive touchscreen allows quick tester setup with easily selectable cable types, standards and testing parameters
1 billion links reported on LinkWare management software


Standards:
Compliant with proposed ISO (IEC WG9 Standard IEC61935-1) Level V accuracy requirements to 1000 MHz
Supports the complete suite of Resistance Unbalance standards needed for Power over Ethernet (PoE) â?? IEC61935-1 & 11801-1-4, IEEE 802.3af, IEEE 802.3at, ANSI/TIA/EIA-568-C.2
Next generation balance drafts â?? IEEE 802.3, TIA TR42.7

Specifications
Dimensions
Assembled Depth (in.)
62 in
Assembled Height (in.)
42 in
Assembled Width (in.)
30 in
Cutting Width (in.)
30 inches
Front Wheel Size (in.)
13
Mower Deck Width (in.)
30 in
Rear Wheel Size (in.)
18
Turning Radius (in.)
18
Details
Assembly Required
Yes
CA (CARB) Compliant
Not CARB Compliant
Commercial / Residential
Residential
Cutting Options
Mulch,Side-Discharge
Deck Material
13 Gauge Steel
Deck Type
Stamped
Drive Type
Rear-wheel Drive
Engine Displacement (cc)
344
Engine Make
Briggs and Stratton Engine
Engine Torque (ft.-lb.)
0
Fuel Tank Capacity (gallons)
1.3 gal
Horsepower (HP)
10.5 hp
Included with Riding Mowers
Battery(s),Engine Oil
Lawn Mower Type
Rear Engine Riding Mower
Maximum Cutting Height (in.)
4
Maximum Forward Speed (mph)
4.25
Maximum Reverse Speed (mph)
4.25
Minimum Cutting Height (in.)
1.25
Mower Size
Small
Number of Blades
1
Number of Blades
1 blade
Number of Cylinders
Single Cylinder
Number of Deck Wheels
0
Oil Capacity (oz.)
48
Power Type
Gas
Product Weight (lb.)
340 lb
Rear Wheel Size (in.)
18 in.
Recommended Oil Type
10W-30
Refurbished
No
Returnable
30-Day
Riding Mower Features
Adjustable Cutting Height,Adjustable Speed,Assembly Required,Built-in Hitch,Cup Holder,Keyed start,Mulching Lawn Mower,Pneumatic Tires,Residential,Reverse Mowing,Rust resistant deck,Single-lever height adjustment
Size of Yard
1 - 2 Acres
Size of Yard
1/2 - 2 Acres
Start Type
Electric
Terrain Type
Flat with Obstacles,Hilly
Transmission Type
Gear Drive
Warranty / Certifications
Certifications and Listings
No Certifications or Listings

Sokkia shc2500 data collector
Price/unit : usd 2, 877

Fedex, ups, dhl, tnt

Sokkia 28x digital level sdl50
Price/unit : usd 1, 186

Fedex, ups, dhl, tnt

Sokkia gir1600 differential gps receiver 1 hz
Price/unit : usd 1, 917

Fedex, ups, dhl, tnt

Leica gps 1200 base rtk smart rover station
Price/unit : usd 4, 230

Fedex, ups, dhl, tnt

Ashtech promark 800 gnss receiver
Price/unit : usd 6, 205

Fedex, ups, dhl, tnt

Price / unit : usd 2, 250
Our respect : geoland-surveying.Com

Angle/dist. Units: switchable between degrees, mil or gon, meter or feet, us/ft-international
Distance measurement: 1 prism: 8, 200, 3 prism: 9, 700, mini prism: 2, 600
Distance measurement precision: ±(2mm+2ppm)
Distance measuring time: 3s+every 0.3s tracking mode
Distance measuring time: 1s+every 0.5s coarse mode
Distance minimum display: 1mm/0.003ft
Display: single
Internal memory: surveying data + coordinates data total 4000 data blocks or 8000 fixpoints
Data input/output: rs-232c
Compensator: oil dual axis
Compensating range/accuracy: ±4/2
Weight: 5.2kg, 11.5lbs including tribrach and battery

In box (fedex, ups, tnt, ems, dhl)

Price / unit : usd 2, 137
Our respect : geoland-surveying.Com
oints
- rs232 port communicates with most data collectors
- contains multiple languages onboard
- waterproof, dustproof ip54
- graphic leveling aid
- laser plummet
- graphic sketches displays the most significant outline points from the site plan
- geb111 6-hr nimh rechargeable battery

In box (fedex, ups, tnt, ems, dhl)

gon, meter or feet, us/ft-international
Distance measurement: 1 prism: 9, 900, 3 prism: 13, 200, 9 prism: 16, 400
Distance measurement precision: ±(2mm+2pmm)
Distance measuring time: 3s+every 0.4s tracking mode
Distance measuring time: 3s+every 0.7s coarse mode
Distance measuring time: 4s+every 1.2s fine mode
Distance minimum display: 1mm/0.003ft
Display: dual
Internal memory: 8000 points or 16000 layout data
Data input/output: rs-232c
Compensator: liquid dual axis
Compensating range/accuracy: ±3/1
Optical plummet: erect 3x
Waterproof: ipx6
Weight: 4.9kg, 10.8lbs including tribrach and battery

In box (fedex, ups, tnt, ems, dhl)

Price / unit : usd 4, 713

Coaxial red laser pointer
Reflectorless
Dual-axis compensation
High quality nikon optics
Onboard survey pro software
Built-in windows ce operating system
Usb high-speed data transfer port
Up to 28 hours operating time with hot swappable batteries
Water resistant and dustproof to ip-66
Dual color touchscreen lcd display
Easy-to-use keypad
Compact, rugged and lightweight

In box (fedex, ups, tnt, ems, dhl)

Ideal as a construction stakeout total station
Perfect when combined with fc field controller and software

The entry-level value choice is the gts-100n. Built with legendary topcon precision and durability, the gts-100n provides the construction professional with a dedicated lay-out solution. Use the on-board software to layout points in the field, confident that with topcon, you'll be right on target. Or use any of topcon's field controllers running one of our range of software packages tailored to the tasks you want to perform.

We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term and mutual benefits.

New / ups, dhl, fedex

Expanded, full numeric keypad
On board programs & 24, 000 point data storage
Ideal as a construction stakeout total station
Perfect as a forensic evidence measuring and recording instrument
Superior, when combined with a data collector and field software
The gowin is a high-value total station. Built for the professional who needs both precision and durability. The gowin tks-202 represents a commitment to supplying surveying, construction and law enforcement with the world's most cost effective, high quality positioning instrument.

We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term and mutual benefits.

New / ups, dhl, fedex

Long-range bluetooth functionality
When connected with an external data collector, longlink communication provides control at the remote rod position. Topcon's exclusive technology, allows the controller operator to record data for codes and rod heights at the point of measurement. On the other hand, the remote operator can view directions required to find the next stake point. The system becomes very productive where the instrument man simply needs to follow, aim, and focus on the remote prism.

We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term and mutual benefits.

New / ups, dhl, fedex

The handheld niton xl3t goldd+ xrf analyzer stands alone with its many standard features and available options.
Enhanced goldd technology offers superior performance for light element (mg-s) analysis with the lowest limits of detection
Pinpoint areas of interest on a sample using the integrated color ccd camera and the optional integrated 3 mm small-spot collimation
True lab-quality performance in a handheld instrument

We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term and mutual benefits.

New / ups, dhl, fedex

We're not going to lie; you're gonna get a lot of double-takes when you're mowing with this suave-looking bad boy. Little do they know this hungry herbivore is a wiz at helping protect the earth, reducing your water and fertilizer use with the Super Recycler's Cutting System. Take mowing creature comforts to the next level with flex Handle suspension and hassle-free maintenance. When you're done, lock and store your Toro practically anywhere in your garage or shed with SmartStow. And you can rest easy knowing Toro stands behind its mowers with a 5-year full warranty. Count on it.


Brand Name: Toro
Sub Brand: SmartStow Super Recycler
Model Number: 21565
Deck Size: 21 in.
Engine Displacement: 163 cc
Powered By: Gas
Self-Propelled: Yes
Product Type: Lawn Mower
Rear Wheel Size: 10 in.
Maximum Cutting Height: 4.25 in.
Drive Type: Rear-Wheel Drive
Minimum Cutting Height: 1.25 in.
Deck Material: Aluminim
Number of Blades: 1 blade
Front Wheel Size: 8 in.
Blade Length: 21 in.
Engine Brand: Briggs & Stratton
Start Type: Pull Start
Cutting Options: Bagged/Discharged/Mulching
CARB Compliant: Yes
Assembled Depth: 62 in.
Assembled Height: 23 in.
Assembled Width: 44 in.
Bagger Included: Yes
Yard Size: 1/4-1/2 acre
Warranty: 5 year
44.86 in.
18.56 in.
23.25 in.

Go green and cut clean with the 13 Amp 16 in. An alternative to traditional gas operated mowers, this electric powered mower is environmentally friendly and maintenance free with no gas, oil, filters or spark plugs. This portable and light weight mower is just 32 lbs. and has collapsing handles for quick and easy storage The single point height adjustment allows you conveniently adjust the height of your deck from 1 - 2-1/2 in.

Details
Voltage (v)
120v
Size of Yard
1/4 - 1/2 Acre
Power Type
Corded Electric
Engine Make
OEM Branded Engine
Rear Wheel Height (in.)
Low Wheel
Additional Tools Included
No Additional Tool
Amperage (amps)
13 A
Assembly Required
Yes
CA (CARB) Compliant
CARB Compliant
Cutting Height Options
5-position
Cutting Options
Bag,Mulch
Deck Material
ABS Plastic
Deck Type
Fabricated
Engine Torque (ft.-lb.)
0.0
Lawn Mower Type
Push Mower
Maximum Cutting Height (in.)
2.64 in
Minimum Cutting Height (in.)
.866 in
Minimum extension cord rating
12 gauge
Mower Size Type
Standard
Number of Blades
1
Number of Handlebar Positions
1
Recommended Terrain
Flat
Refurbished
No
Start Type
Push Button Start
Tools Included
Mower
Walk Behind Mower Type
Manual Push
Certifications and Listings
UL Listed
Assembled Depth (in.)
53 in
Assembled Height (in.)
40 in
Assembled Width (in.)
17 in
Blade Length (in.)
16 in
Cutting Width (in.)
16 inches
Front Wheel Size (in.)
6
Maximum extension cord length (ft.)
50 ft
Mower Deck Width (in.)
16 in
Rear Wheel Size (in.)
7

(bataviadropship)


Husqvarna Automower 430XH Robotic Lawn Mower uses smart technology from the world leader in robotic mowing(1) for a beautifully cut lawn 24/7

Use the Automower Connect app for convenient control of your robotic mower, including scheduling, tracking location, and checking mowing status

Set up the Automower 430XH with the self-installation kit (included); place the charging station, lay the boundary wire, and install the guide wire
The Husqvarna 430XH Robotic Lawn Mower features ultra-quiet, smart-mowing technology from the world leader in robotic mowing(1) to help you effortlessly achieve a beautifully cut lawn with easy control from your smart device. The advanced GPS-assisted technology automatically returns the electric mower to its charging station when the battery gets low. Seamless connectivity allows you to control the electric lawn mower from Amazon Alexa, Google Home or your smartphone with the Automower Connect app. The Husqvarna 430XH Robot Lawn Mower also features an adjustable cutting system and is designed for taller grasses, achieving up to a 3.6-inch cutting height. Each Husqvarna robotic mower works with a wide range of parts and accessories, from replacement wheels to Automower House Kits. (1)Based upon value sales (Dollars) Source Euromonitor International Limited; per Robotic Lawn Mowers category definition; Home and Garden 2022ed; retail value sales in RSP, 2021 data.
Husqvarna Automower 430XH Robotic Lawn Mower uses smart technology from the world leader in robotic mowing(1) for a beautifully cut lawn 24/7

Use the Automower Connect app for convenient control of your robotic mower, including scheduling, tracking location, and checking mowing status

Set up the Automower 430XH with the self-installation kit (included); place the charging station, lay the boundary wire, and install the guide wire

Smart lawn mower is equipped with GPS theft tracking, a built-in alarm system, and PIN code lock so you can secure and track its location at all times

For medium to large yards (0.8 acre), this robot mower mows up to 145 minutes on a single charge with an area capacity of 1,430 square feet per hour

Robot lawn mower is weatherproof and can navigate narrow passages, objects and 45%/ 22-degree slopes, making it perfect for complex yards

Battery powered lawn mower with a 9.45-inch cut width and a 2- to 3.6-inch cut height designed for taller grass types

Features three blades that cut less grass more frequently for a beautifully maintained lawn

Husqvarna robotic mower uses collision and lift sensors that stop the blades instantly when the mower is lifted

Up to 60 minutes runtime on a single charge with the recommended 56V 7.5Ah ARC Lithium battery (available separately)
High-efficiency brushless motor delivers long runtimes, low vibration, and lifelong durability
7-position cutting height adjustments: 1.25 to 4 inches
3-in-1 function: mulching, bagging, side discharge
Quick and easy push-button start
21-inch deck
Bright LED headlights
Adjustable handle height
The EGO POWER+ 21â?? Self-Propelled Mower with Touch Drive delivers 6.0 foot-pounds of cutting torqueâ??power that exceeds gas without the noise, fuss, or fumes. Touch Drive technology puts complete control of the self-propelled system in the palm of your hands by using pressure to engage the system. Easily control the variable speed with a dial positioned at your fingertips for safe and convenient operation. This cordless lawn mower delivers up to 60 minutes of run time on a single charge with the recommended 56V 7.5Ah ARC Lithium battery (available separately). The electric lawn mower delivers precision cutting with its advanced mulching blade and seven cutting height positions from 1.25 to 4 inches, adjustable with one hand. Three-in-one functionality delivers your choice of mulching, side discharge, or bagging your grass clippings; an easy-access two-bushel grass collection bag is included. This self-propelled lawn mower includes bright LED lights for added visibility when mowing at dawn or dusk, and it folds flat for compact storage between cuts. Experience Power Beyond Belief with the EGO POWER+ 21â?? Self-Propelled Lawn Mower with Touch Drive

Features
Generac G-Force 608cc OHV Engine
Precision engineered components for durability and performance
Power to boot with convenient electronic ignition
Pressure lubrication provides superior lube (especially on inclines)
30-Inch Cutting Width
Easily slash through saplings up to 3" in diameter
Capable of cutting grass as high as 4 ft. and weeds up to 8 ft. tall
Designed to process clippings into a finer mulch-eliminating windrows
Commercial-Grade Electric Clutch
Self-adjusting clutch allows for easier access
No more pesky belt engagement pulleys to adjust
High-Performance Blade & Spindle
Wields a dual-sided brush blade for longer use inbetween sharpening
Iron blade spindles are integrated into cutting deck to reduce vibration
Double sealed bearings provide years of maintenance-free use
Enhanced Maneuverability
Though it's a rough cut mower, operation is everything but!
Each wheel has an individual hand brake for easier turning
Transmission locks in ground speed to one of three forward gears
Adjustable Ergonomic Handlebars
Controls are all easily accessible and integrated into the handle grips
Handlebar is adjustable for maximum operator comfort
Holds cord as thick as 5.72mm (4.4mm cord is included)
Tales a Lickin' & Keeps on Tickin'
Generac reinforced common stress spots for years of reliable service
The frame is comprised of heavy-duty powder-coated, laser cut steel
Puncture-Resistant Tires
Deep lugged tire tread provides optimal traction on unwieldy terrains

Specifications
Engine
Engine BrandGeneracStarting System12-Volt Key StartEngine Cycle4-CycleCutting Positions1HP18.67 HPCC608 CCsFuel Tank Size2 GallonsEngine Cylinders1 CylinderOil FilterYesIdle ControlNoLow Oil ShutdownYesConsumer Engine Warranty1 YearCommercial Engine Warranty1 Year
Motor
Battery Voltage12 VoltsBattery TypeLead AcidBattery IncludedIncluded
Deck
Cutting OptionsRear DischargeDeck Material12-GaugeSpindle MaterialDuctile Cast IronBlades1 BladeDeck Positions1 PositionDeck ConstructionWeldedCutting Width30 InchesCutting Height3.5
Drive
Speeds3 SpeedsForward Speeds3 ForwardTransmissionGearDrive SystemSelf-Propelled
Accessories
Hour MeterIncluded
Wheels
Rear Tire Size18 x 6.5 InchTire TypePuncture Resistant
Overview
Assembly RequiredYesConsumer Warranty1 YearCommercial Warranty1 YearPower TypeGasUPC843530005776

Features
Generac G-Force 452cc OHV Engine
Deep lugged tire tread provides optimal traction on unwieldy terrains
Precision engineered components for durability and performance
Highly capable output with convenient electric starting
26-Inch Cutting Width
Easily slash through saplings up to 2.5" in diameter
Capable of cutting grass as high as 4 ft. and weeds up to 8 ft. tall
Designed to process clippings into a finer mulch, eliminating windrows
Commercial-Grade Electric Clutch
Self-adjusting clutch allows for easier access
No more pesky belt engagement pulleys to adjust
High-Performance Blade & Spindle
Wields a dual-sided brush blade for longer use inbetween sharpening
Iron blade spindles are integrated into cutting deck to reduce vibration
Double sealed bearings provide years of maintenance-free use
Enhanced Maneuverability
Each wheel has an individual hand brake for easier turning
Transmission locks in ground speed to one of three forward gears
Adjustable Ergonomic Handlebars
Controls are all easily accessible and integrated into the handle grips
Handle bar is asjutable for maximum operator comfort
Holds cord as thick as 5.72mm (4.4mm cord is included)
Tales a Lickin' & Keeps on Tickin'
Generac reinforced common stress spots for years of reliable service
The frame is comprised of heavy-duty powder-coated, laser cut steel
Puncture-Resistant Tires



Specifications
Engine
Engine BrandGeneracStarting System12-Volt Key StartEngine Cycle4-CycleCutting Positions1HP16 HPCC452 CCsFuel Tank Size2 GallonsOil FilterYesIdle ControlNoLow Oil ShutdownYesConsumer Engine Warranty1 YearCommercial Engine Warranty1 Year
Motor
Battery Voltage12 VoltsBattery TypeLead AcidBattery IncludedIncluded
Deck
Cutting OptionsRear DischargeDeck Material12-GaugeSpindle MaterialDuctile Cast IronBlades1 BladeDeck Positions1 PositionDeck ConstructionWeldedCutting Width26 InchesCutting Height3.5
Drive
Forward Speeds3 ForwardTransmissionGearDrive SystemSelf-Propelled
Accessories
Hour MeterIncluded
Wheels
Rear Tire Size18 x 6.5 InchTire TypePuncture Resistant
Overview
Assembly RequiredYesWeight290 PoundsConsumer Warranty1 YearCommercial Warranty1 YearProduct Length80.5 InchesProduct Width30.25 InchesProduct Height48.2 InchesPower TypeGasUPC843530005769

Features
196cc Cub Cadet 4-Cycle OHV Engine
Delivers consistent power under intense load
Overhead valve design runs cooler and cleaner for longer
SureStart Guarantees start-up in 1 or 2 pulls
MySpeed Drive System
Features 6 self-propelled speed settings for maximum control
Controlled speed variability makes the SC900 very versatile
Take it slower for increased traction and quicker when in open field
23-Inch, 2-in-1 Steel Mower Deck
Provides superior mulching, and rear bagging
Quickly and easily change your cutting height using a single-lever
Choose between 6 positions ranging from 1.25 - 3.75"
Large Bagging Capacity
A 3.1-bushel capacity allows you to mow more and empty less
Bag Full indicator let you know when it's time to be emptied
High-Pressure SmartJet System
Features a deck washout port that facilitates mower deck clean-up
Keep your grass clippings in the yard where they should be!
Simply connect a hose, turn on the water, and rinse away
Comfortable Operation
Foldable and adjustable handlebar with overmold bail
Traction & Control
9" wheels with industrial tread for better grip in slick conditions
RWD is especially beneficial for those with hilly terrain



Specifications
Engine
Engine BrandCub CadetStarting SystemRecoil StartEngine Cycle4-CycleCC196 CCsEngine Cylinders1 Cylinder
Deck
Cutting Options2-in-1 (Bag/Mulch)Deck MaterialSteelDeck ConstructionStampedBlades1 BladeDeck Positions6 PositionsCutting Width23 InchesCutting Height1.25 - 3.75"
Drive
Speeds6 Speeds
Accessories
Rear BaggerIncludedWashout PortYes
Wheels
Front Tire Size9 InchRear Tire Size9 InchTire TypePlastic Wheels
Overview
Assembly RequiredYesWeight100 PoundsConsumer Warranty4 YearsPower TypeGasUPC043033587186Additional Model Numbers12ABR2MM710, SC 900

Features
159cc Cub Cadet 4-Cycle OHV Engine
Autochoke SureStart guarantee
Mower will start in 1 or 2 pulls for full 3-year warranty period
Variable Speed Self-Propelled Drive System
Rear wheels propel the mower
Set your speed based on terrain and personal preference
Cub Cadet Signature System
21-inch, 3-in-1 steel mower deck
Provides superior mulching, rear bagging and side discharge
Patented SmartJet high-pressure deck washing system
1.9 bushel capacity dust-blocking rear bagger
Industrial Tread Wheels
7-inch front ball bearing full swivel caster style wheels
8-inch rear wheel size
Helps the mower easily move across uneven terrain
Soft-Touch Foam Grip Handle
3-way adjustable ergonomic bail

Specifications
Engine
Engine BrandCub CadetStarting SystemRecoil StartEngine Cycle4-CycleCC159 CCsEngine Cylinders1 CylinderOil FilterNoConsumer Engine Warranty3 Years
Deck
Cutting Options3-in-1 (Side-Discharge/Bag/Mulch)Deck MaterialSteelDeck ConstructionStampedDeck Positions6 PositionsSpindle MaterialSteelBlades1 BladeCutting Width21 InchesCutting Height1.25-3.75 Inches
Drive
Speeds6 SpeedsDrive WheelsRear WheelsDrive SystemBelt-Drive
Accessories
Rear BaggerIncludedMulcher KitIncluded
Wheels
Front Tire Size7 InchFront AxleSwivelRear Tire Size8 InchTire TypePlastic Wheels
Overview
Weight82 PoundsConsumer Warranty3 YearsUPC043033582327Additional Model Numbers12ABC62J710, SC 500 Z

Featuring 0.5" angle accuracy and sub-millimeter edm, the net05ax offers maximum precision in a broad range of applications.

Product Description


Getting the job done has never been easier with GreenWorks Tools.
Get started within seconds and leave the gas hassle behind using GreenWorks Tools.
To make your life easier, GreenWorks offer a range of corded and cordless options--all with a complete yard work line to get the job done.


Keep your lawn neat with this electric lawnmower from Greenworks, featuring a 16" cutting swath to make quick work of trimming the grass. Four-wheel maneuverability helps you mow around obstacles and in tight spaces. Collect grass clippings using the rear discharge chute and included discharge bag, or switch the mower to mulch mode to break down grass clippings and redeposit them in your lawn. Mow your yard with fewer emissions and less noise with this corded electric mower. The 10-Amp mower is powerful enough to make it through thick grass while reducing air and sound pollution from your yardwork. With this environmentally friendly option, there's no need to worry about purchasing and transporting gasoline. Simply plug your mower in, and it is ready to go. 10-Amp electric motor for the power to cut through tough, thick grass 16" cutting deck to cut lawns quicker 2-in-1 feature provides both mulching and rear discharge capabilities for versatility 5-position height adjustment offers a range of cutting heights from 5/8" to 2-5/8" for the perfect cut on all types of grass 7" rear wheels and 6" front wheels for maneuverability Greenworks lawn mower with model number 25142 with removable discharge bag and mulch plug constructed of steel, plastic and rubber for durability measures 27" high x 16" wide x 14" deep assembly required.Less

Features for the Husqvarna L221FHE


Cutting Method:Mulching, bagging, and side discharge are all available cutting methods.
Transportation and Storage:Handle is foldable, allowing for easier storage and transportation.
Deck Wash:Connect a hose to the port to quickly and easily clean out the cutting deck.
Electric Start:Easily start the engine with the push of a button.


Technical Specs for the Husqvarna L221FHE

Engine
Engine Brand Briggs & Stratton
Engine 675 Series W-26 EXI
Engine Cooling Air

Cutting Deck
Cutting Methods Collect/Mulch/Rear Ejection
Cutting Width 21 in.
Cutting Height Steps 4 Point
Cutting Height (min-max) 1 - 4 in.

Equipment
Collector Type Down Vented Soft Bag
Collector Volume 2.2 cu. feet
Handle Straight Handle
Handle Height Adjustment Yes
Blade Brake Clutch (BBC) No

BLUEBIRD HM200 (20") 4.4HP HONDA HOVER MOWER
Price:$641.10
SKU:HM200
Brand:Bluebird
Condition:New
Weight:1.00 LBS
Shipping:Calculated at checkout

Product Description
Features
Special Order Item - Please Allow Up To 3 Weeks For Delivery
Advanced Design With High Quality Materials
Proprietary material blend offers immense strength without compromising manueverability
Powerful 4.4HP 160cc Honda GCV160 4-Cycle Engine
Reliable, rugged and easy-to-start
No mixing of oil and gas and less exhaust
Hover Mow Your Lawn With Precision
Air cushion ride technology tackles slopes, pits and other uneven terrain
Comfort & Control
Padded handle moves easily on Versa-Mount pivots
Two built-in mount positions allow fine tune adjusting
Handle length of 59" provides control at any angle
Cut Accurately & Efficiently
Easily choose a cutting height from 0.3" to 3"
20" cutting width handles the work of 4 stick trimmers
Stainless steel blade with proprietary design
Easy To Move & Easy To Store
Integrated front grab handle makes for simple loading and unloading
Never worry about grabbing the blade or engine during transport
Weighs only 36.5 pounds
Not Recommended For Use On More Than A 45 Degree Angle
Specifications
Engine
Engine Brand
Honda GCV
Starting System
Recoil Start
Engine Cycle
4-Cycle
HP
4.4 HP
CC
160 CCs
Deck
Blades
1 Blade
Cutting Width
16 Inches
Cutting Height
0.3-3 Inches
Drive
Drive System
Push
Overview
Weight
36.5 Pounds
Product Length
59.0 Inches
Product Width
23.4 Inches
Product Height
36.7 Inches
Consumer Warranty
2 Years

Features for the Scag STCII-61V-26CV-EFI


Kohler 26 HP Engine: Big Power, air cooled, EFI (electronic fuel injection.
Velocity Plus Cutter Decks: The envy of the industry, Velocity Plusâ?¢ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scagâ??s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.
Ogura PTO Clutch Brake: The Ogura GT3.5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 250 ft. lb. of holding strength, and an adjustable air gap for long life.
Tiger Eye Advanced Monitoring System: Depending on the mower model and engine selection, the Tiger Eyeâ?¢ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operatorâ??s seat.
Comfort Suspension Seat: Torsion-spring suspension seat adjusts to each operatorâ??s weight to provide superior comfort. Seat features full padding, forward/rearward adjustment, a high back, adjustable armrests and an adjustable back angle. The 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.


GENERAL Total Fuel Capacity 9.5 gallons
Drive Tires 24" x 12"-12" (61")
Caster Tires 13" x 6.5"-6", flat-free
Seat 4-point iso-mounted mid-back mounted on operator-suspension platform
DRIVE SYSTEM Drive System Type Dual Pump and Motor
Pumps Hydro-Gear 12 cc
Motors Parker 14.5 ci
Forward Ground Speed 12 mph
Reverse Ground Speed 5 mph
Parking Brake Foot-operated pedal
DECK Cutting Widths 61"
Type Velocity Plus&trade
Cutting Height 1" to 5" in .25" increments
Deck Lift Adjustable foot-operated pedal
Construction Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles.
Spindles Cast-iron housing with tapered roller bearings.
Blade Engagement Ogura GT3.5 (250 ft lb)

AIR FORCE (19") 160CC HONDA HOVER MOWER

Price:$468.90
SKU:F-19
Brand:Air Force
Condition:New
Weight:1.00 LBS
Shipping:Calculated at checkout

Product Description
Features
Advanced Design With High Quality Materials
Allows you to maximize time and effort for turf care needs
Powerful 160cc Honda GCV 4-Cycle Engine
Mounted in reverse to maximize oil lubrication to the engine
Cup and dipper spashing system showers internal components
High performance fuel pump ensures constant delivery of fuel
Extra Strength Reinforcement
7-point engine mount with steel insert reinforcement
Extra thick handle mounts are set low & wide for better stability
19-Inch, Injection-Molded ABS Mower Deck
Coated for UV and chemical restistance
Exceptionally strong yet lightweight deck enhances mower lift
14-Inch Lightweight Impeller
Provides maximum lift and smoother mowing
Operator Presence Control With Blade Brake
Detects when operator releases their grip and cuts the engine
Heavy Gauge Steel Handles
53" handle for maximum reach
Padded for added comfort
Not Recommended For Use On More Than A 45 Degree Angle
Specifications
Engine
Engine Brand
Honda GCV
Starting System
Recoil Start
Engine Cycle
4-Cycle
CC
160 CCs
Fuel Tank Size
0.24 Gallons
Engine Cylinders
1 Cylinder
Oil Filter
No
Torque
6.9 Lbs
Consumer Engine Warranty
2 Years
Commercial Engine Warranty
90 Days
Deck
Blades
3 Blades
Cutting Width
19 Inches
Cutting Height
.5-2.5 Inches
Drive
Drive System
Push
Overview
Weight
38 Pounds
Consumer Warranty
1 Year

https:**powertoolsequip*com*products*-Agri%252dFab-Hard%252dTop-Chip%252dN%252dVac-Tow%252dBehind-Lawn-Vacuum*html

https://powertoolsequip.com/products/-Agri%252dFab-Hard%252dTop-Chip%252dN%252dVac-Tow%252dBehind-Lawn-Vacuum.html

AGRI-FAB HARD-TOP CHIP-N-VAC TOW-BEHIND LAWN VACUUM

Price:$886.35
SKU:45-0540
Brand:Agri-Fab
Condition:New
Weight:1.00 LBS
Shipping:Calculated at checkout

Product Description
Features
208cc Briggs & Stratton Intek Engine
Dependable, powerful performance
Creates 80 mph suction power
Enough power for leaves, pine needles and grass clippings
Safety shutoff prevents accidental engine startups
Large 26 Bushel/32 Cu Ft Capacity
Holds more yard debris - meaning fewer stops
Hopper tilts back for easy dumping of yard debris
Hard Top Collector
Vented to keep dust out of the engine, prevents wear
Steel, Side Chipper Hopper
Chips branches up to 2" in diameter
Converts yard debris into useful mulch
Versatile Design
Fits over 40 different tractor decks up to 54" wide
Templates included (only fits right-side discharge mowers)
Additional hose kit (#65640) needed for zero-turn mowers
Optional #45-0253 Hose Kit (sold separately)
Vacuum debris around shrubs, on patios and under decks
Some Assembly Required - Shipped 75% Assembled
Specifications
Engine
Engine Brand
Briggs & Stratton
Starting System
Recoil Start
Engine Cycle
4-Cycle
CC
208 CCs
Fuel Tank Size
1 Gallon
Consumer Engine Warranty
1 Year
Feed Chute
Wood Diameter
2 Inches
Feed Type
Gravity
Number of Blades
2 Blades
Replaceable Blades
Yes
Discharge Chute
Bag
No
Discharge Chute Material
Plastic
Vacuum
Removable Hose
No
Towing
Towable
Yes
D.O.T. Lights
No
Fenders
Yes
Hitch Type
ATV/Lawn Mower Hitch
Accessories
Rear Bagger
No
Wheels
Tire Type
Pneumatic Wheels
Overview
Assembly Required
Yes
Weight
365 Pounds
Product Length
96 Inches
Product Width
33 Inches
Product Height
62 Inches
Consumer Warranty
3 Years
Commercial Warranty
90 Days
UPC
00052613104705

Features for the Husqvarna Z254F






Ergonomic control panel
The ergonomic control panel places everything conveniently at your fingertips.

Removable foot plate
The unique tube style chassis features a removable foot pan for easy access to the top of the cutting deck.

Anti-slip foot area
The footrest area incorporates generous non-slip surfaces for safe and comfortable use.

Bumper
The integrated front guard/ bumper offers bold styling while protecting the nose of the unit. An optional bright LED headlight kit can easily be added, providing improved visibility in dark conditions.

Refinement
Rubber bellows offer a refined look and prevent debris and moisture from entering the control system.

Comfortable Seat
The thick padded seat and soft outer cover offers superior support and comfort, while the open back gives added ventilation.

Specifications

Capacity

Speed forward max: 6.5 mph

Speed forward min: 0 mph

Cutting deck

Cutting width: 54in

Cutting deck type: ClearCutâ?¢ - Fabricated

Cutting methods: Collect/Mulch/Side discharge

Cutting deck material: Steel

Deck thickness: 10 gauge

Cutting height steps: 6

Blade engagement: Electric clutch

Clutch rating: 87 ft.lb

Blades: 3 pcs

Anti-scalp wheels: 6

Nose roller: No

Deck lifting system: Manual, hand operated

Powder-coated cutting deck: Yes

Spindle/mandrel type: Cast iron

Greaseable mandrels: Yes

Deck Wash Port: Yes

Cutting height, min-max: 1.5-4 in

Dimensions

Base machine, length: 75 in

Base machine, height: 40 in

Base machine, width (chute down): 67 in

Base machine, width (chute up): 56 in

Weight: 595 lbs.

Tire size, front Width: 5 in

Tire size, front Diameter: 11 in

Tire size, front Diameter wheel: 6 in

Drive System

Transmission type: Hydrostatic

Transmission manufacturer: Hydro-Gear

Transmission manufacturer: Hydro-Gear

Pump displacement: 10 cm�³

Fan-cooled pumps: Yes

Engine

Motor/engine manufacturer: Kawasaki

Engine name: FR Series

Power output: 24 hp

Cylinder displacement: 726 cm�³

Cylinders: 2

Engine cooling: Air

Air filter type: Auto-type Paper

Power/fuel type: Gasoline

Engine lubrication type: Full pressure with oil filter

Oil filter: Yes

Fuel tank volume (with reserve): 3.5 gal (US)

Fuel tank location: Side (Single)

Equipment

Seat material: Vinyl

Seat spring: Yes

Seat back height: High

Hour meter type: Digital with pre-programmed service intervals

Cup holder: Yes

Hinged armrests: Standard

ROPS: No

Seat type: Comfort high back

Features for the Champion 200989 - Generator


Quiet Technology and Extended Run Time
61 dBA is great for RVs, tailgating, or camping with 4500 starting watts and 3500 running watts and up to 14 hours run time on only 2.3 gallons of gasoline.

Parallel Ready
The optional parallel kit (sold separately) enables this inverter to connect with another 2800-watt or higher Champion inverter to double your output power.

Intelligauge with Power Meter
Monitor voltage, frequency, and operating hours with ease, plus the EZ Start Dial simplifies startup while Economy Mode monitors power consumption in real time.

Clean Power for Sensitive Electronics
RV Ready with a 120V 30A RV, plus two 120V 20A household outlets with clean power (less than 3% THD) and two convenient USB ports.

SPECIFICATIONS

Gasoline Starting Watts : 4500W

Gasoline Running Watts: 3500W

Gasoline Starting Amps at 120V: 37.5A

Gasoline Running Amps at 120V: 29.2A

Volts: 120

Frequency: 60Hz

Outlets: 120V 30A (TT-30R), Dual 5V 2.1A USB, 120V 20A Duplex (5-20R)

GFCI Outlets: No

Covered Outlets: Yes

Covered Circuit Breakers: Yes

Gasoline Run Time at 1/4 Load: 14â??h.

Noise Level: 61â??dBA

Inverter: Traditional

Parallel Capability: Yes

DC Operation: Yes

Voltmeter: Intelligauge

Automatic Voltage Regulation: No

Battery: No

Start Type: Recoil

Engine Brand: Champion

Engine Size: 212cc

Engine Type: 4-stroke

Engine Speed: Variable

Fuel Type: Gasoline

Fuel Gauge: Yes

Gasoline Capacity: 2.3â??gal.

Gasoline Tank Material: Steel

Engine Oil Type: 10W-30

Engine Oil Capacity: 0.5â??qt.

Engine Oil Included: Yes

Low Oil Shut-Off: Yes

Wheels: Yes

Wheel Type: Solid

Wheel Diameter: 5â??in.

PGMA G300-2018 Compliant: No

EPA Certified: Yes

CARB Compliant: Yes

DIMENSIONS

Length: 23.2 in.

Width: 17.7 in.

Height: 20.1 in.

Weight: 95.0 lb.