Our wood sawdust charcoal is produced from 100% natural hardwood sawdust, offering a clean and long-lasting burn. Itâ??s ideal for BBQ use, industrial heating, and export markets that value sustainability and performance.
Key Features: - Smokeless and odorless burn - High heat output and low ash content - Eco-friendly and sustainably produced
The OXE250 is a bi-turbo configuration that provides its full 755 Nm of torque at the propeller already at 2250 RPM. The power and high torque of the marinized diesel block in the OXE250 prove an enduring and relentless product, applicable in diverse settings as both a workhorse and a high-speed solution, as well as revolutionary bollard pulling power.
The OXE Diesel is powered by a modern, automotive-derived diesel engine, marinized in a standard inboard layout with closed cooling circuit and easy access to maintenance components. Its advanced transmission system features a hydraulic-electric multi-disk clutch, engineered for high-load duty cycles and frequent shifting. This setup enables smooth transitions during operation, trolling mode, and allows for emergency crash-stop procedures.
Delivering 250 hp and 790* Nm peak torque at 2,250 RPM, the OXE250 is extremely fuel-efficient, consuming just 51â??53 l/h at wide-open throttle. This results in fuel savings of 30â??40% and up to 60%
more range compared to gasoline alternatives. The unit supports propellers up to 17" in diameter and is available in configurations optimized for high-speed or high-torque applications. All models comply with EPA Tier III, IMO Tier II, EU RCD, and BKI emission standards, with the production facility in Poland meeting ISO9001 and ISO14001 standards.
Specifications:
Engine Type
Diesel, L6. (Base block by BMW)
Intake
Bi-Turbocharged
Power
250 hp
Fuel Consumption
51-53 l/h
Noise (RCD tested)
70.8 dB
Peak Torque
790 Nm*
Engine Displacement
3.0 l
Engine Position (from Base Automotive Block)
Unmodified (horizontal)
Engine Marinization Type
Standard Inboard Configuration
Max RPM
4200 RPM (�±100)
Weight
430 kg (25") / 435 kg (33")
Outboard Configuration
Rig Length
25" or 33"
Steering
Approved for Dometic and Ultraflex Steering
Rating
Light-Duty Commercial
Transmission
Transmission
Hydraulic Multidisc
Rapid Gear Shift Capability
Yes
Crash Stop Capability
Yes
Low Speed Capabilities
Yes
Gear Ratio
1.39:1
Cooling
Cooling
Glycol Closed Cooling Circuit
Water Pump
Replaceable Rubber Impeller, Serviceable From Transom
Max Sea Water Temp
40�°C
Ambient Temperature
50�°C
Electrical
Max Alternator Output
180 AMP
Alternator Output for Onboard Equipment
110 AMP
Prop Sizing
Slimmed Lower Housing for Reduced Drag
Yes
Max Prop Sizing
17"
INCLUDED:
Black Box Rigging Kits
Oxe Controls
Oxe Display
Steering
Service and Tools
Premium Oils and Coolants
Propellers
The OXE150 is the most popular unit in the OXE Diesel range. It delivers 150hp and 380Nm (280 ft-lb) of torque. With the high torque gear ratio on the primary system, the OXE150 delivers up to 607Nm (447 ft-lb) of torque on the propeller shaft.
The OXE150 is considered the ultimate work tool for many commercial users, especially heavy-duty vessels with single or multiple installations. The unit allows for long-range operations due to fuel consumption limited to 32L/hr (WOT).
The OXE150 is specifically designed for agility and controllability in heavy commercial or load demanding applications, as well as in tender boats.
Power and versatility
The powerful high torque of the diesel engine manifests itself throughout the OXE Diesel engine series. Together with the robust transmission and interchangeable gear ratios, it provides the users with reliable options to use the engine as both a powerful workhorse and a high-speed solution.
Diesel provides for high efficiency and torque. It gives increased load capacity and greatly reduced fuel consumption compared to gasoline, increasing the range by over 60%.
Reduced CO2 emissions
The reduced fuel consumption is a key factor to why the OXE Diesel engine emits significantly lower CO2 than a gasoline outboard engine. One litre of diesel produces approximately 2.69kg CO2 and one litre of petrol produces 2.36kg CO2 when ignited. Since OXE150 consumes less fuel than petrol alternatives, it reduces CO2 emissions by up to 34.5%.
FEATURES
Diesel Engine
Low Speed Control
Fuel Economy
CAN based helm control system
Dual helm capability
Joystick docking
Robust modular design
Low drag propulsion housing
Directly replaceable with other outboards
Quick shift capable
Specifications :
Engine type
Diesel, L4
Displacement
2.0 L
Intake
Turbocharged, inter-cooled
Torque
High Speed: 380Nm (280 ft-lb), High Torque: 607NM (447 ft-lb) @ 2500 RPM
Power
150 HP at 4100 RPM
Fuel
Diesel
EN 590, ASTM D 975 No.1
No.2. JIS KK2204, F54 & F75
Weight
350 kg
Alternator output
130 Amp
Rig length
25â?� or 33â?�
Cooling
Closed cooling circuit
Starting
Electric
Steering options
Hydraulic, Electronic Power Steering, Joystick
Shiſt
CANbus, Electro-hydraulic
Clutch
Hydraulic multi-friction plate
Gear ratios
1.73:1 and 2.17:1
Dimensions (25â?� leg), LHW
994x1880x678mm
INCLUDED :
Black Box Rigging Kits
Oxe Controls
Oxe Display
Steering
Service and Tools
Propellers
Coconut Charcoal Briquette
For Shisha
Mix Coconut Charcoal Sulawesi
and Java for Shisha
Premium Quality
(Gold Level) Middle East and
Asia Standard:
Calorie value: 7200 Kilocalorie
Total moisture: 6%
Ash content: 2.5 %
Fixed carbon: 80 %
Burning time: 2 Hours
White ash
Size 2.5 cm x 2.5 cm x 2.5 cm
(Can be customized)
MSDS Certificate
10 Kg Packaging Carton
(Include inner box)
Indonesian coconut-shell charcoal briquettes for shisha and hookah applications. Available in 25 mm, 26 mm and 27 mm cube formats, subject to final producer confirmation.
Packing can be coordinated for retail, private-label and bulk/Gastro requirements depending on buyer specifications. Typical configurations may include 1 kg inner packing and master cartons.
MARL Indo Sourcing coordinates buyer requirements, Indonesian producer matching, product specification alignment, commercial communication, quality-evidence coordination and export follow-up.
Buyers are invited to provide their required cube size, ash level, burn duration, spark/smoke/odor expectations, packing, quantity and destination so the closest production match can be confirmed.
Indicative FOB Indonesia price. Final quotation is subject to confirmed specification, packing, order quantity and current production terms.
Coconut Shell Charcoal Briquettes Are Compressed Blocks Mad From Crushed, Burned Coconut Shells. They Are An Eco-friendly, Renewable Fuel. They Burn Much Hutter And Longer Than Standardwood Charcoal. They Are 100% Natural, Produce No Smoke Or Bad Smell, And Leave Very Little Ash
These Briquettes Are Commonly Used For:
~ Barbeque (bbq): They Provide Steady, High Heat For Grilling Food.
~ Hookah Or Shisha: They Are The Top Choice For Heating Shisha Pipes Without Changing The Flavor Of The Tobacco
~Coocking And Heating: They Are Used As A Clean Alternative To Regular Wood Charcoal.
Beacause Coconut Shell Are Very Hard And Dense, They Hold A Lot Of Carbon. When Burned In A Low-oxygen Oven, Yhey Turn Into A Pure, High Heat Charcoal. Manufacturers Mix This Charcoal With A Natural Starch Binder ( Like Cassava Starch ) And Press It Into Shapes Like Cubes Or Hexagons.
We would like to introduce ourselves as a reliable supplier COCONUT SHELL CHARCOAL from Central Sulawesi, Indonesia.
Please feel free to request more product information or updated pricing based on your order quantity.
1. Available Grades & Technical Specifications
We offer several grades of Coconut Shell Charcoal and can customize specifications according to your requirements.
Our standard export grade is as follows:
Fixed Carbon:� 75-85%
Ash Content: 3%
Moisture Content: 17%
If you require higher-grade specifications, we would be pleased to discuss your technical requirements.
2. Minimum Order Quantity (MOQ)
Our minimum order quantity is� one 40-foot container, equivalent to approximately� 26 metric tons (26 MT).
3. Payment Terms
We accept the following international payment methods:
Telegraphic Transfer (T/T)
4. Incoterms: FOB Palu (Pantoloan Port), Indonesia
5. We can assist in obtaining the latest CIF shipping cost to your requested destination port, as well as arranging the shipment and handling the necessary export documentation. However, all freight, insurance, documentation, and any related costs will be borne by the buyer.
Premium Shisha Charcoal Briquettes
Experience long-lasting heat, low ash, and a clean burn for the perfect shisha session. Premium quality, export-ready, and available for worldwide shipping.
We are a leading manufacturer and exporter of premium Indonesian coconut shell charcoal briquettes. Engineered for both Shisha/Hookah and Barbecue (BBQ) purposes, our briquettes deliver long-lasting burning time, high heat output, and minimal ash. We support OEM/White Label branding and worldwide shipping with complete export documents.
Product Specifications:Material: 100% Pure Coconut Shell (No chemical additives)Shape & Size: Cube (25x25x25mm, 26x26x26mm), Finger/Cylinder, or Hexagonal (Customizable)Calories: 7,200 - 7,500 Kcal/kgMoisture Content: Max 5%Ash Content: 1.8% - 2.5% (Super White / Silver Grey Ash)Fixed Carbon: Min 80%Burning Time: 1.5 - 2 Hours (Consistent heat)Features: Odorless, smokeless, sparkless, and eco-friendlyPackaging & Logistics:Inner Box: 1 kg / 2 kg (with your custom brand design)Master Carton: 10 kg / 20 kg double wall carton boxMinimum Order Quantity (MOQ): 1 Full Container Load (FCL 20ft / approx. 18 Metric Tons)Supply Ability: Up to 300 Metric Tons per month Shipping Documents: MSDS, SHT, COO, BL, and Phytosanitary Certificate
Mocaf is modified Cassava Flour, which is kind of all purpose plain flour like wheat flour. The difference is the content of gluten. Mocaf is free of gluten while wheat flour is content a gluten.
Wood charcoal is a lightweight, black, carbon-rich fuel made by heating natural wood in a low-oxygen environment through a process called pyrolysis
**Spec :
* Moisture : 4.05%
*Ash : 2.00%
*Volatile matter : 15.84%
*Vixed carbon : 78.08%
Indonesia-origin premium white charcoal / Binchotan for premium grilling, foodservice and restaurant-supply applications. The product is natural hardwood lump / stick white charcoal offered in mixed D / S / M / L grades.
Supplier-stated technical figures include fixed carbon above 90%, calorific value of 7,000â??7,500 kcal/kg, burning time of approximately 6â??7 hours, total moisture of 5.27%, and ash content of 2â??4%. These values should be reconfirmed against the relevant production batch and supporting COA / laboratory data where available.
Typical packing is 10 kg or 15 kg carton boxes with inner plastic. Private-label packing can be coordinated subject to producer capability and buyer requirements.
MARL Indo Sourcing coordinates buyer requirements, Indonesian producer matching, specification alignment, sample coordination, commercial communication, QC evidence coordination and export follow-up. MARL acts as a sourcing representative and commercial liaison, not as the manufacturer.
Indonesiaâ??s tropical lands produce some of the finest coconuts in the world, with versatile uses across industries. At Tiga Export, we supply not only raw coconuts, but also high-value derivatives such as:
Coconut Fiber â?? durable natural fiber widely used in furnishing, mattress production, and industrial applications.
Coconut Shell â?? a sustainable raw material for activated carbon, handicrafts, and energy sources.
Coconut Briquettes â?? eco-friendly, high-density fuel blocks ideal for heating and cooking, widely demanded in international markets.
Our coconut products are sourced responsibly, processed with care, and delivered to meet global standards.
