PTFE rod is a high-performance plastic with excellent chemical resistance, electrical insulation, and low friction properties.
It is used in a wide variety of applications, including the chemical, food, and electrical industries.
SUPERSONIC DISTRIBUTIONS & SERVICES PVT. LTD. offers PTFE rod in a variety of sizes and lengths to meet your specific needs.
We are committed to providing high-quality products and services at competitive prices.
EXCELLENT RESISTANCE TO CHEMICAL CORROSION
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
LOW WATER AND GAS ABSORPTION
TRANSPARENT TO LIGHT AND RAYS
NON STICK FOR SMOOTH PASSAGE OF FLUIDS
HIGH TEMPERATURE RESISTANCE UPTO 200 Degree Celsius
Dimensions in mm
PLAIN TUBING NATURAL & COLORED / STRIPED - 1.0 TO 35.0 ID X 2.0 TO 38.0 OD
CORRUGATED TUBING NATURAL & BLACK - 6.0 ID TO 65.0 ID
HEAT SHRINK TUBING NATURAL & COLORED - 2.0 ID TO 100.0 ID ON REQUEST
PROPERTY - STANDARD - VALUE
Specific gravity - ASTM D792 - 2.16
Tensile strength - ASTM D638 - 31 Mpa
Ultimate elongation - ASTM D638 - 305 %
Flexural modulus - ASTM D790 - 586 Mpa
Impact strength - ASTM D256+23 Degree Celsius â?? 54 Degree Celsius - 155
Hardness - ASTM D2240 - 57 Shore D
Coefficient of dynamic friction - 0.2
Melting point - 260 Degree Celsius
Service temperature (20000h) with 50% retention of ultimate elongation -
205 Degree Celsius
Inflammability - UL-94 - 94 V-0
Dielectric constant at 103-106 Hz - ASTM D150 - 2.1
Dielectric strength - ASTM D150 - 45KV/mm
Arc resistance - ASTM D495(Stainless steel electrodes) - Greater than 300 S
Volume resistivity - ASTM D257 - Greater than 10 by 18 Omega cm
Weather resistance - "Weather-O-meter"(2000h)
Solvent resistance - ASTM D543 - Excellent
Chemical resistance - ASTM D543 - Excellent
EXCELLENT RESISTANCE TO CHEMICAL CORROSION
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
EXTREMELY LOW WATER AND GAS ABSORPTION
LOW STATIC AND DYNAMIC FRICTION COEFFICIENT
HIGHLY NON STICK FOR SMOOTH PASSAGE OF FLUIDS
HIGH TEMPERATURE RESISTANCE
Dimensions in mm
PLAIN TUBING NATURAL & COLORED / STRIPED - 0.5 TO 25.0 ID X 0.75 TO 28.0 OD
CORRUGATED TUBING NATURAL & BLACK - 6.0 ID TO 65.0 ID
HEAT SHRINK TUBING NATURAL - 2.0 ID TO 100.0 ID
IMPROVED HARDNESS OVER VIRGIN PTFE
EXCELLENT WEAR RESISTANCE OVER VIRGIN PTFE
HIGH COMPRESSIVE STRENGTH
EXCELLENT OILFREE SLIDING MATERIAL WITH LOW FRICTION
EXCELLENT OILFREE BUSHING & PISTON RING MATERIAL
SOME GRADESBIOSAFE AND INERT
REDUCED CREEP
Dimensions in mm
EXTRUDED RODS - 5 TO 100 X 1000 L
PRESSED RODS - 25 TO 300 DIA X 300 L
PRESSED SHEETS - 4 TO 100 THICK X 10002 / 12002 /15002
SKIVED SHEETS - 0.25 TO 3.O THICK X 1000 / 1200 / 1500 X LONG ROLLS
EXTRUDED HOLLOWS - 20 OD X 10 ID TO 150 OD X 75 ID X 1000 L
PRESSED HOLLOWS - 175 OD X 75 ID TO 1200 OD X 1050 ID X 100 / 200 / 300 L
CUSTOM SIZES - RODS, SHEETS, HOLLOWS AVAILABLE ON REQUEST WITH MOQ
MICROMACHINED CIRCULAR PARTS - 0.5 TO 10 DIA
MACHINED CIRCULAR PARTS - 10 TO 1200 DIA
MACHINED SQUARE / RECTANGULAR PARTS - 5 X 5 TO 1000 X 2000 / 1500 X 1500
EXCELLENT RESISTANCE TO CHEMICAL CORROSION
EXCELLENT SOFT SEALING MATERIAL
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
LOW STATIC AND DYNAMIC FRICTION COEFFICIENT
HIGHLY NON STICK
HIGH WEATHERING RESISTANCE
HIGH TEMPERATURE RESISTANCE
Dimensions in mm
EXTRUDED RODS - 1 TO 5 Dia X Long Spools
6 TO 25 Dia X 1000 OR 2000 L
30 TO 200 Dia X 1000 L
PRESSED RODS - Available in the above sizes in 300 L
PRESSED SHEETS - 4 TO 100 Thick X 10002 / 12002 /15002
4 TO 100 Thick X 1000 X 2000 Special Production with MOQ
SKIVED SHEETS - 0.2 TO 6.O Thick X 1000 / 1200 / 1500 / 2000 Wide X Long Rolls
EXTRUDED HOLLOWS - 20 OD X 10 ID TO 150 OD X 75 ID , 1000 / 2000 L
PRESSED HOLLOWS - 175 OD X 75 ID TO 1200 OD X 1050 ID , 100 / 200 / 300 L
ONE-SIDE SODIUM ETCHED PTFE SHEETS - Available in all sizes
CUSTOM SIZES - Rods, Sheets, Hollows available on Request with MOQ
MICROMACHINED CIRCULAR PARTS - 0.5 TO 5 Dia
MACHINED CIRCULAR PARTS - 5 TO 1200 Dia
TECHNICAL DATA SHEET
PROPERTY â?? STANDARD - VALUE
Density - ASTM D792 - 2.16 - 2.20 g/ cubic centimeter
Water Absorption - ASTM D570 - Less than 0.01 %
Tensile strength - ASTM D638 -greater than or equal to 200 kg/ square centimeters
Elongation - ASTM D638 - greater than or equal to 300 %
Impact strength, Izod,23 Degree Celsius - ASTM D256 - 1.6 J/cm
Hardness - ASTM 785 - 50 - 55 Shore D
Compressive strength at 1% def. - ASTM D695 â?? 40 - 50 kg/ square centimeters
Thermal conductivity - ASTM D2214 - 0.2 W/m. K
Coefficient of Thermal Expansion, 25 to 100 Degree Celsius - ASTM E831 - 16 x 1-5 Degree Celsius -1
Volume resistivity, at 50% RH - ASTM D257 - greater than or equal to 1018Ohm cm
Surface resistivity , at 50% RH - ASTM D257 - greater than or equal to 1017Ohm
Dielectric strength - ASTM D149 - greater than or equal to 55 KV/mm
Safe Operating temperatures - 50 to 200°C(biological, pharma, food applications)
- 50 to 260°C(Non-bio/food/ pharma applications)
Coefficient of friction, static - ASTM D3028 - Less than 0.09
Coefficient of friction, dynamic - ASTM D3028 â?? Less than 0.05
Moisture / solvent absorption - Negligible
Combustibility - Non-combustible
Weather resistance - Excellent
Chemical resistance - Excellent, except for highly fluorinating agents
3607 Plastic Items Suppliers
Short on time? Let Plastic Items sellers contact you.
EXCELLENT RESISTANCE TO CHEMICAL CORROSION
EXCELLENT SOFT SEALING, LIGHT CLAMPING SEALING MATERIAL
HIGH RESILIENCE & RECOVERY, SUITED FOR REUSE
LOW CREEP & LOW COLD FLOW UNLIKE NORMAL PTFE
EASY TO CUT WITH BLADE OR SCISSORS
BIOSAFE AND INERT
FIBROUS 3D STRUCTURE- EQUAL PROPERIES IN EACH DIRECTION
Dimensions in mm
FLAT SHEETS - 1500 X 1500 X THICKNESSES 0.5 , 1.0 , 1.5 , 2.0, 3.0, 4.0, 5.0, 6.0
CUT MADE-TO-ORDER GASKETS - CIRCULAR , RECTANGULAR , AS PER DRAWING ANY SIZE UPTO 1500 X 1500
Oftentimes a standard baffled FIBC is insufficient for ultra-clean applications. When the functionality of a baffled bag and film liner is required, a baffled liner is appropriate.
Baffled liners allow a standard bulk bag to maintain a square shape. The liner is form fitted to the bag and utilizes internal baffles to prevent bulging that could result in a rounded footprint. The square shape promotes greater bag stability and stackability. Furthermore, the square shape greatly improves storage capacity.
Technical Applications & Features
Eliminates dusting and leakage
Increased FIBC stackability
Increased stability
Can hold up to 30% more product in a given space
Custom-formed spouts for efficient filling and discharge
A lay flat tube is a common, cost-effective style of FIBC liner. The liner has no spouts or contours. Generally, the liner is open on one end and heat sealed on the other. Lay flat liners can be inserted and attached into a bulk bag in the same manner as a form fit liner.
Prior to filling the bag, it is recommended that the liner is pre-filled with air to remove possible twists or wrinkles in the liner.
Technical Applications & Features
Eliminates dusting and leakage
Cost effective vs. form fit style liner
Gusseted
Clear or custom colours
Improves compatibility with filling equipment
Sealed or open bottom
High Strength
Can be removed and reused
