Find Verified Rubber Items Suppliers, Manufacturers and Wholesalers

HS10 Rubber Bellow Seals are widely used in centrifugal pumps and rotating equipment's with pumping media as water. In addition, these are also considered as one of the most versatile products, which are widely used in different applications in various industries as it is easy to install and economical.
These Seals comes both in Cartridge & non Cartridge Version. With Special Rubber Material these can also be used for moderate to high temperature water applications.

Applications:

Domestic pumps
Hot & cold-water pumps
Oil pumps
Refrigerator compressor
Fuel injection pumps

Material:

Seal Faces: Carbon Vs Ceramic/Sic./TC
Secondary Seals: Nitrile/ Neoprene/Viton
Metal Components: SS-316

Product Specifications:

Shaft Dia.: 10 to 100mm
Pressure: up to 10 Bars
Temp.: -20 to 150 C
Speed: up to 25 m/s

LED HEADLIGHT BATTERY OPERATED ELASTIC BAND

headlamps enhance the road safety because of clear illumination. It has very high service life compared to other types of headlamps. It also enhances the styling of the vehicle. LED's put less strain on the eyes of the driver.

Categories - Surgical Products

Extruded rubber profile

EPDM profile

Rubber cords

Price: 24.00 - 30.00 INR/Box
Supply Ability : 5000 Per Week
Delivery Time :1 Week

Product Features of Rubber Expansion Joint


To provide stress relief in ducting system by absorbing any difference in dimension caused by thermal change.
To protect equipment by reducing equipment vibration.
To provide simple connection of misaligned pipes.
Accommodate expansion and contraction movement in axial, lateral and angular direction.
Prevent the propagation of electricity
Dampen sound transmission

Materials

Rubber : Neoprene, Nitrile, EPDM, Natural, Butyl, Hypalon, Silicone, SBR, Flurocarbon rubber
Fabrics : Canvas, Rayan, Polyester, Nylon, Glass Fabric
Metal Flanges : Stainless Steel, MS, Aluminium

Type, Size and Pressure Rating
Type : Single arch type, multi arch type, sleeve, Joint type, Enlarge Flange type, wide arch type.
Size : 50 to 3000 mm
Pressure (base on dia) : Upto 25 kg/cm2
Permissible movement : Axial (compression) - upto 200 mm
Axial (elongation) - upto 75 mm
Transverse - upto 75 mm
Face to Face length : 50 to 700 mm

PRODUCT FEATURES
Flexible Expansion Rubber bellows are used to make an end-to-end join between two ducts of the same size.

Provides a good airtight seal to prohibit intake of air, humidity or dust inside joined units.
Prevent access to high-voltage conductors.
Withstand high internal pressure.
Ensure electrical insulation between units.
Allow for relative axial movement.
Prevent transmission of vibrations of electrical equipment like generators etc. to the bus duct.
Take care of thermal expansion and contraction of the bus duct enclosures.
Provide enhanced fitment tolerance during installation of the bus duct
Product Type : Rectangular Rubber Bellows with Flange

For medium/low pressure hydraulic oil, air, water transportation
Product Description
Noise insulation Sheet better known as Sound deadner or floor silencer is a composite Material based on asphalt fillers and small Quantity of polymer as binder used in the Automotive interior floor for controlling Noise Vibration and Harshness

Application
Used on the cab floor, tunnel, door, pannel
Lower deskboard, vertical surface or over
Hanging parts of vehicle like passenger car
Commercials & utility vehicle and tractor

Form of Supply
Size as per dimensional requirement

Typical Physical Properties Color : Black
Thickness : 1.5-3.0 mm
Sp. Gr. : 1.4-1.8
Evaporation loss 30 (minutes)/150¦ C : 1% Max.
Heat Flow : No break due to Sagging
Adhesion Strength : 5.0 Kg/cm2 (mm)
Sound Atenuation : 8-17 db/sec.
Smoke temp. : Above 150¦ C
Thermal fusion weldability : 50% and above
Bondability - 20¦ C / 5¦ C : No crack
Dropping : No Sag crack
Cold impact resistance - 20¦ C / 5¦ C : No crack or peeling
Coefficient of damping : 0.08 and above
Over heating - 90¦ angle : No mark, peeling, falling
Tensile shear strength : 0.2-0/Kg cm2 (min)
Impact resistance - 20¦ C / 5¦ C : 35 or more
Corrosion resistance : No corrosion
Shrinkage : < 2%

Product Description
URI Butyl Vibro dampner are elastic, Non-curing and self adhesive compound for vibration dampening, sound proofing and heat insulation.

Product Feature
Retention of tack for indefinite period
Highly flexible, outstanding age & weather resistance and resistance to hardening
Very good chemical and thermal stabilty
Vibration & sound dampening characteristics
high durability, low vapour transmission rate and non-fogging characteristics
No corrosion on metal like Copper, Mild steel, Aluminium
Easy to apply

Typical Physical Properties Color : Black/Grey
Sp. Gr. : 1.1-2.6
Adhesion Strength : >0.4 Kg/Cm2
Tensile Strength : 0.7-1.2 Kg/Cm2
Stretch : >100%
Corrosion resistance on CU tube at 80 C for 168 hrs : No discolouration
Weather resistance : No peeling at sticking Part
Water absorption : 1%
Peeling property of release paper : Easily peelable
Errosion resistance on AL, CU : No Change
Solidity : >98%
Heat proof at 100 C for 72 hrs : No Peeling or crack
Odor : No unconformable odor
Frost resistance (-5 to 100 C) : No Crack
Physical Form : backing

Air Rubber Hoses
Material : NR Epdm
Size/Diameter : 30 100 mm
Working Pressure : 6000 psi
Usage/Application : Automobile
Type : Hydraulic Hose Pipe
Brand : Kemo
Color : Black
1000 pcs : 50000

Description
We are enlisted amongst the well-known names in the industry, engaged in manufacturing and supplying functionally advanced array of Rubber Hoses that are available in different sizes and grades. We test them on different parameters using latest tools thereby ensuring its quality. Our entire product range is as per the set quality standards and guidelines.

Features:

Low maintenance
High efficiency
Reasonable price
Additional Information:

Production Capacity: 10000 pcs
Delivery Time: within 45 days
Packaging Details: packing in polybags tthen in master cartons

DESCRIPTION:
EPDM rubber sheet / roll is very good weather-proof quality that makes highly recommended for the outdoor use, These sheets resist to oxidation, UV rays, Ozone, weathering & low temperature flexibility. The operating temperature range is from (-40°C to +130°C). EPDM rubber sheets / rolls are stable for long time due to its inert structure

APPLICATIONS:
EPDM rubber sheets are highly used for industrial & outdoor application like weather strips, drinking water applications, rain water sealing, protection against sunlight & heat gaining as a roofing membrane & acid resistance applications. Also useful as a liner in pulverizing system.

PROPERTY:
Very good resistance to water & water-based chemicals withstand temperature up to 130°C. Very good weathering resistance. Good resistance to mild acids, liquid fertilizer & break fluids. No resistance to oil & oil based products.



100% EPDM RUBBER SHEET: BLACK
NO GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BEP-1155 1.1 55 70 500
2 BEP-1260 1.2 60 80 400
3 BEP-1365 1.3 65 100 300
4 BEP-1470 1.4 70 70 250


COMMERCIAL GRADE EPDM RUBBER SHEET
NO GRADES EPDM (%) DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BEPNR-50 50 1.5 65 50 250

PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25

MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05


RECOMMENDATIONS REGARDING STORAGE AFTER RECEIPT
Store according to DIN 7716 standards. Products must be stored in cool, dry & dark places
Avoid contact with hydrocarbons, solvents, acids & alkalies.
If there is any doubt about the condition of sheet/roll, they should be retested before putting into service.
Products should be issued in the order of their date of manufacture.

DESCRIPTION:
Nitrile Rubber is a copolymer of butadiene and acrylonitrile. Nitrile rubber sheets are mainly used as oil & solvent resistance as it has good tensile strength, low compression set, flexibility & impermeability to gases. These sheets are very good resistance to petroleum based products having recommended for operating temperature from (-20°C to +110°C).

APPLICATIONS:
These sheets / rolls are mainly used for sealing, gasket & packing to avoid leakages from oil, solvent, petroleum based fluids, lubricating oil, transformer fluid & sealing against gases.

PROPERTY:

Very good resistance to petroleum based fluid goods & high temperature resistance up to 110°C.
Very low-level permeability to gases. Poor ozone resistance.


100% NITRILE RUBBER SHEET: BLACK
NO GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BNT-1240 1.2 40 60 500
2 BNT-1350 1.3 50 70 450
3 BNT-1460 1.4 60 80 400
4 BNT-1570 1.5 70 80 300

COMMERCIAL GRADE NITRILE RUBBER SHEET
NO GRADES NEOPRENE (%) DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BNTNR-50 50 1.6 65 20 250


PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25

MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05


Store according to DIN 7716 standards.
Products must be stored in cool, dry places with temperature ranging between 10°C to 30°C, sheltered from the sun & free from ozone for better shelf life.
Avoid contact with acids & alkalies.
If there is any doubt about the condition of sheet/roll, they should be retested before putting into service.
Products should be issued in the order of their date of manufacture.

DESCRIPTION:
NR / SBR blend rubber sheets / rolls are used in the commercial and industrial applications. This specifically designed rubber material is long-¬lasting that is suitable for operational use which provides excellent mechanical properties like high resilience, low compression set, high resistance to cut, tear & abrasion & also offers resistance to many acids, alkalis & salts. The operation temperature range is (-¬20°C to +80°C). It is available in wide range of hardness from 40 Shore A to 80 Shore A. It has very good physical properties like Tensile strength, wear & tears properties, Abrasion resistance.

APPLICATIONS:
NR / SBR Rubber sheets / rolls are used for wide range of applications like skirt board, bridge bearing, gasket for high pressure packing, heavy weight machinery packing, Para-¬quality for sand/shot blasting machinery & used as shock absorber. NR / SBR Rubber sheets/rolls can be used as shelf liner; workstation table liner and work area rubber lining that can with and moderate chemicals & alkaline solutions. These sheets can also be used for anti-abrasion lining for material handling machinery in mines alike industries

PROPERTY:
Excellent resistance to inorganic chemicals, water, air & heat up to 80°C. Poor resistance to Ozone, UV, Sunlight, oil & solvents & organic chemicals.

NO. GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Elongation (%)
1 BNS-1240 1.20 40 80 600
2 BNS-1345 1.30 45 90 500
3 BNS-1450 1.40 50 70 450
4 BNS-1565 1.50 65 60 400
5 BNS-1670 1.60 70 50 300

PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25

MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05

STORAGE OF PRODUCTS
Do not expose rubber sheet to direct sunlight, sheets away from heat source, preferably in dark, air ventilated room will help give longer life & optimum properties
Do not remove polythene packing before use to prevent it from exposure of atmospheric oxygen, ozone & polluted air. Do not store rubber sheet rolls in open, even after covering it with tarpaulin to protect from air & rain. Always keep rolls in vertical position ONLY
Keep rolls away from solvent, oil & fuel storage. Do not use hooks while loading/unloading the rolls. Inspect sheet for smooth surface & hardness (with rubber hardness tester)

DESCRIPTION:
Diaphragm Rubber sheets are manufactured by inserting 1 ply & 2 ply Nylon Fabric used as Diaphragms for wide variety of applications specifically for Oil, LPG & solvent resistant applications. Recommended use for control valves, regulators, pumps etc. Diaphragm sheet is manufactured with high quality Nitrile rubber compound designed for long service. This rubber sheet is reinforced with multi-ply fabric to provide desired strength. The purpose of providing insertion is to provide additional strength to material in order to make it more pressure proof. Selection of fabric is available on request.



NO GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BDR-1370 1.3 70 80 300


PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25


MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05
RECOMMENDATIONS REGARDING STORAGE AFTER RECEIPT
Store according to DIN 7716 standards.
Products must be stored in cool, dry & dark places with temperature ranging between 10°C to 30°C, sheltered from the sun & free from ozone for better shelf life.
Avoid contact with acids & alkalies.
If there is any doubt about the condition of sheet/roll, they should be retested before putting into service.
Products should be issued in the order of their date of manufacture.

DESCRIPTION:
Butyl Rubber sheet / roll are a very low permeability to air & other gases. These sheets have excellent resistance to sunlight, ozone & oxidation. The operating temperature resistivity ranges from (-30°C to +110°C). It is resistant to most inorganic products and best resistance to mineral acids & alkaline.

APPLICATIONS:
These sheets / rolls are used for Chemical tank lining, Pharmaceutical stoppers, Acid protective clothing & many more applications.

PROPERTY:
Very good resistance to acids & alkalis. Very good for low resilience applications like shock absorber & vibration dampers. Not recommended its use in applications where resistance to oils & hydrocarbons is required.



NO GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BIIR-12560 1.2 55 80 350
2 BIIR-13065 1.3 60 60 300
3 BINR-60
(IIR: NR = 60:40) 1.3 65 70 350


PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25

MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05


RECOMMENDATIONS REGARDING STORAGE AFTER RECEIPT
Store according to DIN 7716 standards.
Products must be stored in cool, dry & dark places with temperature ranging between 10°C to 30°C, sheltered from the sun & free from ozone for better shelf life.
Avoid contact with hydrocarbons, solvents.
If there is any doubt about the condition of sheet/roll, they should be retested before putting into service.
Products should be issued in the order of their date of manufacture.

DESCRIPTION:
Commercial rubber sheet used for gasket & packing purpose in industrial applications. These sheets / rolls are made from Prime polymer blended with reclaim rubber. As it is cured using compression moulding & rotary drum curing system available in smooth & cloth impression finish with or without choice of insertion.

APPLICATIONS:
This commercial rubber sheets / rolls are mainly used for flange gasket packing to avoid leakages from air, water & inorganic chemicals, machinery packing pads, anti vibration pads & flooring purpose.

PROPERTY:
Good resistance to inorganic chemicals, water, air & heat up to 70°C. Poor resistance to Ozone, UV, Sunlight, oil & solvents & organic chemicals. Boron Rubbers India has custom designed this rubber to meet many applications on several different levels while maintaining a very economical basis for a rubber sheets / rolls.

COLOR: Black
No GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Elongation (%)
1 BRZ – 1560 1.50 70 25 200
2 BRZ – 1665 1.60 65 20 175
3 BRZ – 1870 1.80 60 15 150

PRODUCT DIMENSIONS
Rotocure Finish Plate Finish
SIZE (Mtrs) THICKNESS (MM)
1.2 x 10, 20, 30 3 to 12
Finish Smooth / Texture Impression
SIZE (Mtrs) THICKNESS (MM)
1.2 x 2.4 3 to 25
1.0 x 2.0 3 to 25

MANUFACTURING TOLERANCES
THICKNESS WIDTH LENGTH HARDNESS DENSITY
+ / - 0.3mm or 10% whichever is higher + / - 2% + / - 5% + / - 5 + / - 0.05

STORAGE OF PRODUCTS
Do not expose rubber sheet to direct sunlight, sheets away from heat source, preferably in dark, air ventilated room will help give longer life & optimum properties
Do not remove polythene packing before use to prevent it from exposure of atmospheric oxygen, ozone & polluted air. Do not store rubber sheet rolls in open, even after covering it with tarpaulin to protect from air & rain. Always keep rolls in vertical position ONLY
Keep rolls away from solvent, oil & fuel storage. Do not use hooks while loading/unloading the rolls. Inspect sheet for smooth surface & hardness (with rubber hardness tester).

DESCRIPTION:
Neoprene rubber is a chloroprene rubber, which has excellent mechanical property & good abrasion resistance. It gives good resistance to oil & heat, ozone, sunlight & weather and also gives good adhesion to metal surface. Neoprene rubber sheets / rolls are available for a range of applications in the industries. Many grades of neoprene are available depending on the application. These rolls will handle most tough industrial environments and moderate to heavy alkaline and chemical resistive situations. It is manufactured in pure neoprene rolls, commercial, medium strength, High Strength, Cloth Inserted, Antistatic, Fire Retardant, and Textured & in Strips. The temperature ranges from (-30°C to +100°C) in operation condition.

APPLICATIONS:
Neoprene rubber sheets / rolls are mainly used in sealing applications in construction sites & sound studios, general & industrial applications like sealing, gasket & packing to avoid leakages of oil, heat, steam, water, air, acid & alkali. It is also used in marine applications. It has flame retardant properties & good resistance to inorganic chemical products.


100% NEOPRENE RUBBER SHEET: BLACK
NO GRADES DENSITY (g/cc) HARDNESS (SH–A) TENSILE (Kg/cm2) Eb (%)
1 BNP-1445 1.4 45 60 350
2 BNP-1555 1.5 55 70 300
3 BNP-1665 1.6 65 70 250

Zenith Rubber manufactures a comprehensive range of rubber Moulded & Extruted Product. From basic commercial compounds to highly technical sheets to match stringent customer specifications.

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Rubber manufactures a comprehensive range of rubber Moulded & Extruted Product. From basic commercial compounds to highly technical sheets to match stringent customer specifications.

Zenith Rubber manufactures a comprehensive range of rubber Moulded & Extruted Product. From basic commercial compounds to highly technical sheets to match stringent customer specifications.

Zenith Rubber manufactures a comprehensive range of rubber Moulded & Extruted Product. From basic commercial compounds to highly technical sheets to match stringent customer specifications.

Zenith Rubber manufactures a comprehensive range of rubber Moulded & Extruted Product. From basic commercial compounds to highly technical sheets to match stringent customer specifications.

Zenith Rubber manufactures a comprehensive range of rubber Moulded & Extruted Product. From basic commercial compounds to highly technical sheets to match stringent customer specifications.

Zenith’s Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Inflatables Products

With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts.

The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors.

Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.

Inflatables Products

With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts.

The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors.

Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Inflatables Products

With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts.

The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors.

Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.

Inflatables Products

With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts.

The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors.

Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.

Inflatables Products

With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts.

The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors.

Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request

Zenith Abra-Super Rubber sheets

use premium natural rubber for abrasion, impact and corrosion resistance. The Abra-Super range provides unmatched wear performance in the toughest abrasion environments.

Pure natural rubber is an outstanding abrasion resistant material, particularly for handling slurries. The inherent properties of strength, resilience and cut resistance have a direct effect on wear performance.

Features

Premium Resistance to abrasion with excellent tensile strength and high elasticity.

Applications

Lining of slurry chutes, pipes, tanks, cyclones, foat cells, launders, and storage bins.

Finish Type

Both side smooth, both side fabric and buffed finish, One side smooth other side fabric or buffed finish.

Standard Thickness

1 mm to 40 mm

Standard Length

10 Mtr, 33 Ft, 11 Yard

Standard Width

1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches

Technical Specification
Code Specific Gravity Hardness (+/- 5) Tensile Strength Elongation Abrasion Temperature
Gm/cm3 Shore A Kg/cm2 % mm3 C
STANDARD ASTM D297 ASTM D2240 ASTM D412 ASTM D412 ASTM D5963 --
Abrasuper 40 0.98 38 240 810 120 -30 to +70
Abrasuper 60 1.10 60 200 500 110 -30 to +70
ABRA R 60 1.10 60 270 700 110 -40 to +75
ABRA HDR 1.15 70 225 600 110 -40 to +75
>Custom width and length is available on request
>Custom colours available on request