Find Verified Steel Wires Suppliers, Manufacturers and Wholesalers

The G I. Wire of 3.15mm dia x 4.00mm dia with
tolerance of +or- 2.5 % in dia as per IS:280/1978
with latest amendment/revision if any.
Yes
2) The G. I. Wire shall drawn from soft wire having
tensile strength 450-550 N/mm2
Yes
3) Breaking Load shall be as under :
for G. I. Wire 3.15mm dia x 339.3 to 459.2
for G. I. Wire 4.00 mm dia 544 to 740.54
Yes
Yes
4) Zinc coating shall be as under
i) Heavy coating IS : 4826/78
ii) How dip galvanizing, weight of zinc coating
when tested IS : 4826/79
iii) The quality of zinc shall be as per IS : 209/1992
iv) No. of dip guaranteed.
3 Nos. of 1 minute dips & 1 No. 1/2 minute dip as
per IS:2633/1986
Yes
Yes
Yes

Jhas 0.8 Mm - 1.2 Mm Sealing Wire Galvanized Steel for Lead Seal. ...
50-100 M Sealing Wire, For Industrial. ...
Packing Wire. ...
0.5-5 Mm Golden Sealing Wire, For Industrial, Thickness: 5-20 Mm. ...
Jamesmaag 1.26 Mm Sealing Wire. ...
Silver 1 Mm Packing Wire. ...
NBI Lead Seal. ...
Smartpack 15 Mm Sealing Wire, For Construction, Thickness: 1 Mm.

Ungalvanized steel wire rope 6 12 + 7FC, RHRL ( Right Hand Regular Lay), T/S 1770/mm2, according to EN 12385:4, packing in ply wooden reels/1000 meters. Size 6mm, 8mm, 10mm, 12mm, 14mm, 16mm.
...
Galvanized Steel Rope.
Fiber core RD / mm Weight kg/mm2 /unit
6 Ã?? 19 + 1 13.00 160

2 Tensile properties of the wire shall be as follows: Tensile strength of galvanized M.S. Wire shall be 300 550 N/mm2. 4.1. 3 Type of coating of galvanise shall be heavy as per IS: 4826 1979 and the wires shall be galvanized after drawing & annealing.

Wire Thickness( 2 Strand wires) : 2.5mm(12SWG)
Barb Spacing : 3 to 5inches
Length Per KG : 6 Meter /20 Feet
Approx Bundle Weight : 25 to 30 KG
Length per bundle : Approx 168 Mtr / 550 Feet

Diameter 0.30 mm to 16.00 mm
Material High Carbon Steel
Size 0.30 mm to 16.00 mm
Surface Finish BLACK & GALVANIZED
Coil Weight 10 to 1000 kg

Diameter 0.30 mm to 16.00 mm
Material High Carbon Steel
Size 0.30 mm to 16.00 mm
Surface Finish BLACK & GALVANIZED
Coil Weight 10 to 1000 kg

Standard: ASTM, BS, DIN, GB. Wire Diameter: 4.00mm-12.00mm.
...
Prestressed PC Steel Wire.
Nominal Diameter, mm(in) Tensile Strength, min, Mpa (psi)
Type BA Type WA
6.35(0.250) 1655(240 000) 1655(240 000)
7.01(0.276) 1620(235 000) 1620(235 000)

Diameter 0.30 mm to 16.00 mm
Material High Carbon Steel
Size 0.30 mm to 16.00 mm
Surface Finish BLACK & GALVANIZED
Coil Weight 10 to 1000 kg

Finished: Hot dip Galvanized.
Tension strength: 700-800 N/mm2.
Wire diameter: 2.10 mm.
Tolerance: + 0.025 mm / - 0.025 mm.
Thickness of Zinc coating: 15-17 g/m2.
Coil dimensions: inner diam. about 400 mm.
Outer diam: 900 mm.
Height: 750 mm.

Steel wool grades and fiber thickness
Steel wool is made by shaving thin layers of steel from wires. Steel wool consists of long and relatively strong shavings with sharp edges.

2 Tensile properties of the wire shall be as follows: Tensile strength of galvanised M.S. Wire shall be 300 â?? 550 N/mm2. 4.1. 3 Type of coating of galvanise shall be heavy as per IS: 4826 â?? 1979 and the wires shall be galvanised after drawing & annealing.

High Tensile Wire
Standard: Both GB/T 20118-2006, DIN, EIPS are available.
Nominal tensile strength (Mpa): 1570, 1770, 1870, 1960 etc.
Quality control: ISO 9001 etc.
High Tensile Wire Diameter: 4 / 4.5 / 4.8 / 5 / 6 / 6.25 / 7 / 8 / 9 / 10 / 12mm.
Tolerance: +/-0.05mm.
Elongation: 3.5.

Non aloy steel wires

Stainless Steel Wire 316L
Carbon: 0.030.
Manganese: 2.0.
Phosphorus: 0.025.
Sulphur: 0.01.
Silicon: 0.75.
Chromium: 17.0-19.0.
Nickel: 13.0-15.5.
Molybdenum: 2.0-3.0.

A) Capacity: 24,000 MT And Growing

B) Equipment

8-Blocker Straight line machine with PLC control
4-Blocker straight line machine with PLC control
Hi speed 40-table annealing furnace-12 m long
Inverted vertical wire drawn machine
All machines are available with an online clearing and coating facility.

PRODUCT SPECIFICATIONS

WIRE

SIZE RANGE : 1.8 - 8 mm

PHYSICAL ATTRIBUTES : Coil ID 300 - 700 mm Coil Weight - 25 - 850 kg

FINISH : Bright material

TOLERANCE : H9, H10, H11

SUPPLY CONDITION : Soft annealed
¼ hard
½ hard
Spring hard
Tensile standard /
As per customer
requirement

GRADES : AISI: 201, 202, 204Cu, 301, 302, 303, 304, 304Cu, 304HC, 304L, 304H, 310, 310S, 312, 314, 316, d16L, 316LN, 316Ti, 316LCu, 321, 410, 420, 430, 430L, 904L

DIN/EN: 1.4301, 1.4306, 1.4307, 1.4310, 1.4401, 1.4404, 1.4567, 1.4841, 1.4842, 1.4541, 1.4845, 1.4570, 1.4571, 1.4578, 1.4597, 1.4362, 1.4370 and 1.4016

Electrode Grades: ER304, ER304L, ER307, ER307SI, ER308, ER308L, ER308LSi, ER310, ER316, ER316L, ER316LSi, ER347, ER347SI, ER309L, ER430 and ER420

*Specialised grades also available as per customer requirements

A)CAPACITY: 2,20,000 TPA

B)EQUIPMENT:

Reheating Furnace fully automated with dual fired burner LPG/LDO.s
High-pressure De-scaler.
4-Stand Housingless Roughing Mill in horizontal and vertical combination.
10-Stand Housingless Continuous Mill in horizontal/vertical combination with 8 loopers for tension free rolling and 2 shears for end cutting.
4 Cantilever stands in horizontal and vertical combination with Tungsten Carbide (TC) Rings.
10-Stand V-type, no twist wire rod block.
Primary cooling line for controlling laying temperature.
Laying head.
70 m long cooling conveyor with retarded, forced cooling and online quenching facility.
Pallet type coil handling with vertical compactor.
Mill fully automated by ABB drive and PLC.
Solution Annealing Furnace.
Pickling line with Effluent Treatment Plant.
Wendt CNC grinding machine for TC Rings

PRODUCT SPECIFICATIONS

WIRE ROD

a. SIZE RANGE : 5.5 - 16 mm
(Wire rod block )

COIL WEIGHT : 850 kg

COIL DIMENSIONS : ID: 800 - 900 mm OD: 1250 (wire rod block)

TOLERANCE : As per EN 10088

SUPPLY CONDITION: Hot rolled (HR
Hot rolled + pickled (HRP)

b . SIZE RANGE : (Available in mm) 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12, 13, 14, 15 and 16.

COIL WEIGHT : 50 kg, 25 kg

SUPPLY CONDITION : Hot rolled + annealed + pickled (HRAP)

c . SIZE RANGE : Under commissioning: 17 - 40 mm (garret coiled)

GRADES
ASTM: 201, 202, 204Cu, 301, 302, 303, 304, 304Cu, 304HC, 304L, 304H, 310, 310S, 312, 314, 316, d16L, 316LN, 316Ti, 316LCu, 321, 410, 420, 430, 430L, 904L

DIN/EN: 1.4301, 1.4306, 1.4307, 1.4310, 1.4401, 1.4404, 1.4567, 1.4841, 1.4842, 1.4541, 1.4845, 1.4570, 1.4571, 1.4578, 1.4597, 1.4362, 1.4370 and 1.4016

Electrode Grades: ER304, ER304L, ER307, ER307SI, ER308, ER308L, ER308LSi, ER310, ER316, ER316L, ER316LSi, ER347, ER347SI, ER309L, ER430 and ER420

*Specialised grades also available as per customer requirements