Find Verified Remote Controls Suppliers, Manufacturers and Wholesalers

The controller is designed for aquarium controlling.It process is directly and efficiently perceived through the senses.The autocontrol including temperature, pump an lights.The customer setting can be remembered when the power shut down.For the physical desigh, we seperate the high voltage circuit from the controlling circuit.This is safe for the operating personnel.The power board print every output name , such as light, uv, .Etc.The controller is necessary for aquarium.



CARTONS

Cooling and heating controller.

Fan controllers
Light control / baybus
Front i/o adapters
Temperature sensors
Configurable lcd displays
Fan speed controller
Manual rpm control
Multi fan controller,
Fan rpm monitoring and control .




Cartons.

Application
6181B is cord for use in machine tools and electrical appliances.
Conductor
Extra flexible copper conductor
Insulation
PE/XLPE insulation
Core
Single core and multi core conductor from 0.5-1000 mmsq
Armouring:
Armoured and unarmoured available
Jacket
PVC/LSOH/LSF.

Application: Power limited circuit, remote control, signaling, security systems, communications, intercom/P.A. systems, sound/audio, and nurse call.
Conductor Material: Bare copper wire strands
Insulation Material: PE/PVC
Laying-up: Units
Drain Wire: Solid bare copper
Shield: Overall Al/Polyester foil shield
Nylon Rip Cord: 150D
Sheath Material: PVC/LSF/PE
Sheath Color: As your request
Shape: Circular in cross-section
Voltage Rating: 300/500 voltage
Temperature Rating: 75íµ
Fire Performance
Flame Propagation Test to IEC 60332 Part 1 and Part 3
Determination of the amount Halogen Acid Gas to IEC 60754 Part 1
Smoke Density Test to IEC 61034
Oxygen Index Test to BS 2863 or ISO 4589-2
Temperature Index Test to BS 2782 or ISO 4589-3
Fire Resistant Test to IEC 60331-24.

Applications:
Long distance outside telephone, catv, data, communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial
(with armoring).
Construction:
The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a
Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable
Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation)
Minimum bending radius:
Short term installation: 20 x overall diameter
Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored)
Twist (torsion length): 125 x overall diameter
Working temperature: -40íµ ~ +70íµ (pe sheath)
Storage temperature: -50íµ ~ +70íµ (pe sheath)
Product highlights:
All the fiber containing tubes are placed in concentric layers around the central member; through the control of
The twist length, the fiber cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene,
Are placed at the centre of the cables.


Roll, box, drum

Application
These cables are designed for transmission of analog and digital signals, and the interconnection of electrical equipment and instruments, particular for the process control industry.
Conductors: Annealed solid copper(Class 1), stranded(Class 2), or flexible(Class 5) to BS 6360.
Insulation: PE/XLPE
Screen:
(Overall Screen)
(Individual Screen + Overall Screen)
(Overall Screen + Steel Wire Armour)
(Individual Screen+ Overall Screen+Steel Wire Armour)
Sheath Version: PVC/LSF/LSOH
Pair Identification:
a) Collectively screened cables: Color coded in accordance with Color Code as per BS5308 standard.
b) Individually screened pairs: One white core and one black core in each pair. Pairs identified by numbered screen isolation tape.

Conductor: Plain annealed
Fire barrier: Mica Tape
Insulation: XLPE
Filler: Polypropylene yarn
Binder Tape: Polypropylene
sheath : LSOH compound
No. of Core Conductor Nominal Thickness of Insulation Nominal Thickness of Sheath Approx. Overall Diameter Approx. Weight
Size No/Dia. of Wire Approx. Dia.
mm2 No/mm mm mm mm mm kg/km
2 1.5 7/0.53CR 1.59 0.7 0.9 9.0 115
2.5 7/.067CR 2.01 0.8 1.0 10.5 160
4.0 7/0.85CR 2.55 0.8 1.1 12.0 220
3 1.5 7/0.53CR 1.59 0.7 1.0 10.0 140
2.5 7/0.67CR 2.01 0.8 1.1 11.5 195
4.0 7/0.85CR 2.55 0.8 1.1 12.5 265
4 1.5 7/0.53CR 1.59 0.7 1.0 11.0 170
2.5 7/0.67CR 2.01 0.8 1.1 12.5 240
4.0 7/0.85CR 2.55 0.8 1.2 14.0 335 .

Note: CR = Circular stranded conductor .

Reference Standard: CW1198
Application: This cable is used for communication and telephone systems, distribution cabling and direct buried.
Conductor Material: Solid plain annealed copper referred to BS6360
Insulation Material: Cellular High Density Polyethylene
Laying-up: Pairs; Units
Wrapping: Polyester Tape
Filler: Petrolatum Jelly filled
Screen: Aluminum foil with overlapping
Bedding: Polyethylene.

These cables are designed for transmission of anglog and digital signals, and the interconnection of electrical equipment and instruments, particular for the process control industry.
Conductors: Annealed solid copper(Class 1), stranded(Class 2), or flexible(Class 5) to BS 6360.
Insulation: PE/XLPE.

Screen:
(Overall Screen)
(Indiviudual Screen + Overall Screen)
(Overall Screen + Steel Wire Armour)
(Individual Screen+ Overall Screen+Steel Wire Armour)
Sheath Version: PVC/LSF/LSOH.

Pair Ideatification:
a) Collectively screened cables: Color coded in accordance with Color Code as per BS5308 standard.
b) Individually screened pairs: One white core and one black core in each pair. Pairs identified by numbered screen isolation tape.

1.Specialize for gift wrapping, flower & plant packaging, promotion, shopping etc.
2.High quality, competitive price, punctual lead time, good after sale service
3.Customized sizes, colors and designs can be available
4.Strict control of quality from raw material, printing process to carton packaging.
5.Favorable terms with further cooperation.
6.Experienced advice to you for confirmation before mass production.
7.Sgs & msds certificate
8.Transportation service from china port to named destination

Any size
Any shape
Material:kinds of paper, kinds of pp, pe, pvc, pet.Non woven pp.
Kinds of handles:
Soft rope/pp grosgrain ribbon/flat cotton grosgrain ribbon/ flat cotton twill ribbon/four knots/inserted into turn-top and glued/without grommets/with grommets/die-cut etc.
Printing:
Silkscreen/ offset/4-color process/foil hot stamp/emboss/deboss.
Finishes/coatings:gloss film lamination/matte film lamination/no lamination/gloss varnish/matte varnish/uv gloss coatings/uv matte coatings/gloss silkscreen/matte silkscreen/heat stamped/embossed
Top and bottoms:
Plastic/paper cardboard-reinforced bottom board
Folded in turn-top
Folded out turn-top
Finishes/coatings:
Gloss laminated/matte laminated/gloss varnish/matte varnish/uv spot varnish
Percentage ink coverage
0%-100%/one or both sides
Packaging:
Paper carton with opp bag enclosed.
Attention:image is for illustrative purposes only.
If colour is important and for further information, pls be free to contact us via email


Paper carton with opp bag enclosed.

Applications:
Long distance telephone, catv, data communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct
Burial (with armouring).
Construction:
The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the
Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical
Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh
Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500n (short term installation); 900n (long term installation)
Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter)
Twist (torsion length): 125 x overall diameter
Working temperature: -20íµ ~ +70íµ (pe sheath)
Storage temperature: -40íµ ~ +70íµ (pe sheath)
Product highlights:
Small diameter and light weight.
Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber
Cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress
And achieve better flexibility.
íewide operating temperature range.


Roll, box, drum