Find Verified Gypsum Suppliers, Manufacturers and Wholesalers

Gypsum is a very soft sulfate mineral composed of calcium sulfate dihydrate, with the chemical formula CaSO4·2H2O. It is found in alabaster.
there is other analysis as customer need
uses:
1- calcinated gypsum is about 95 % of gypsum uses that we heat the gypsum to 130 degree which remove water and become hemi hydrated gypsum that called plaster of paris, it used in wall plaster, wall lining, plaster board, wall board, tiles for ceikings, partitions. Thermal isolation, regulator to moisture measurements.
2- add Uncalcined gypsum crushed from 3 to 6 % to produce Portland cement so solidification speed become low.
3- gypsum contain 15-20 % sulfur produce ammonium sulfate which act as natural fertilizer.
4- glass industry to easily remove the gases.
5- fine gypsum use in resin industry, paper filler, in soil used in drilling petroleum well.
• by heating to 1093 degree, calcium sulfide form which produce sulfuric acid and lime.
• A binder in fast-dry tennis court clay.
• Plaster of Paris (surgical splints; casting moulds; modeling).
• A wood substitute in the ancient world; for example, when wood became scarce due to deforestation on Bronze Age Crete, gypsum was employed in building construction at locations where wood was previously used.[19]
• A tofu (soy bean curd) coagulant, making it ultimately a major source of dietary calcium, especially in Asian cultures which traditionally use few dairy products.
• Adding hardness to water used for homebrewing.
• A component of Portland cement used to prevent flash setting of concrete.
• Soil/water potential monitoring (soil moisture tension).
• A common ingredient in making mead.
• In the medieval period it was mixed, by scribes and illuminators, with lead carbonate (powdered white lead) to make gesso which was applied to illuminated letters and gilded with gold in illuminated manuscripts.
• In foot creams, shampoos and many other hair products.
• Impression plasters in dentistry

Gypum board
Agriculture

Roof Coating Compound

Hyboard is a new and innovative panel engineered and introduced to face the most stringent and challenging construction demands.
This panel is comprised of a ber cement external skin laminated to gypsum to form a robust and durable single piece composite. It is abuse resistant, impact resistant, moisture resistant, and re resistant.
Advantages:
Customizable Gboard and Cboard
combinations that are suitable for any performance requirement
Hyboard is used in areas where high technical performance is required, such as fire rating, abuse resistance, moisture resistance, and sound attenuation.
Surface Finishing:
Painted (water or oil base paint)
Cladding (wallpaper, vinyl, wood
Joint filling with Ccoat Multi Purpose Joint Compound
Edge Types:
Squared edge
Tapered edge
Standards:
ASTM C1396
ASTM C518
ASTM C473
Dimensions:
Width 1200mm,1220mm
Length 2000mm, 2400mm, 2440mm, - 2500mm, 3000mm
Thicknesses 12.5mm, (3.5 mm Cboard & 9 mm Gboard

Gboar RockShield is a noncombustible, waterproof, and mold resistant gypsum board wrapped by glass mat sheathing on the long edges, and front and back faces providing additional reinforcement and protection against weathering. Gboard�® Rockshield is used as a substrate to exterior cladding material such as marble, tiles, brick veneer, clapboard, wood shingles and more. It can withstand heavy wind, rain, and high temperatures.
Advantages
A gypsum board most suitable for outdoor applications
Can withstand weather changes only if properly sheathed
A thermally balanced with low water absorption

Surface Finishing
Multiple finishing options: Painted (Water or oil bas paint)
Wallpaper, vinyl,wood
Joint fillingWith Gcoat All Purpose Joint Compound

Edge Types
Squared edge
Tapered Edge

Standards
ASTM C1396
ASTM C473
ASTM C518
ASTM C1178

Dimensions
Width: 1200mm, 1220mm
Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm
Thickness: 9.5mm, 12.5mm, 15.9mm, 18mm

Gboard Echo is a perforated gypsum board with a laminated acoustical eece to its back side. Its core is produced from non-combustible material and offers mechanical stability, which make the board suitable for screw-fastening to drywall framing. Gboard Echo provides excellent sound absorption for suspended ceiling applications or any other application that requires high NRC (Noise Reduction Coefficient) values.
Advantages
A lightweight accoustical fleece that absorbs sound laminated to its backside
High NRC values: up to 0.8
Various perforation types suitable for all applications

Surface Finishing
Multiple finishing options: Painted (Water or oil bas paint)
Wallpaper, vinyl,wood
Joint fillingWith Gcoat All Purpose Joint Compound

Edge Types
Squared edge
Tapered Edge

Standards
ASTM C1396
ASTM C473
ASTM E 84
ASTM C423

Dimensions
Width: 1200mm, 1220mm
Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm
Thickness: 8mm, 9.5mm, 12.5mm, 15mm, 15.9mm, 18mm

Gboard Deciloc is a complete sound barrier. Due to its high density and high ber content, when installed in a partition system, ceiling or dry lining system, sound transmission from one area to another is practically eliminated. Gboard�® Deciloc STC rating is designed to reach a sound attenuation up to 75 dB within the system. Gboard Deciloc is used in loud spaces to eliminate sound transmission to neighboring areas. It can be installed around generators and technical rooms, office spaces, hospitals, meeting rooms, cinemas, theaters and large commercial areas where separation is needed.
Advantages
Noise reduction up to 75 Db
Ideal to block sound inside of a space and eliminating its transmission to nearby rooms

Surface Finishing
Multiple finishing options: Painted (Water or oil bas paint)
Wallpaper, vinyl,wood
Joint fillingWith Gcoatâ All Purpose Joint Compound

Edge Types
Squared edge
Tapered Edge


Standards
ASTM C1396
ASTM C473
ASTM C518

Dimensions
Width: 1200mm, 1220mm
Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm
Thickness: 8mm, 9.5mm, 12.5mm, 15mm, 15.9mm, 18mm

Gboard FR is a fire-resistant gypsum board reinforced with fiberglass. The fiberglass acts as a retardant and protection to the board, improving the performance of the system when exposed to re. Gboard FR has a pink color paper face. Gboard FR is used in indoor areas such as internal walls and ceiling applications where improved re protection is needed. All materials are certi�ed based on ASTM and EN standards and tested in approved laboratories.
Advantages
Reinforced with fiberglass that improves the performance of the system when exposed to fire
Used in indoor areas as fire protection limiting its spread and growth

Surface Finishing
Multiple finishing options: Painted (Water or oil bas paint)
Wallpaper, vinyl,wood
Joint fillingWith Gcoat All Purpose Joint Compound

Edge Types
Squared edge
Tapered Edge

Standards
ASTM C 1396
ASTM C473
ASMT C518
ASTM E84
EN 520

Dimensions
Width: 1200mm, 1220mm
Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm
Thickness: 8mm, 9.5mm, 12.5mm, 15mm, 15.9mm, 18mm

Gboard MR H3 is a moisture resistant board with silicon oil in the core having an average percentage, between 10 and 25 %, of water absorption. The oil acts as a water repellent rendering the core more resistant to moisture. Gboard�® MR H3 is the perfect suit for areas of high humidity. Gboar MR H3 is composed of the best quality gypsum, non-toxic minerals, and moisture repellent additives which suit health conditions. All materials are certiï¬?ed based on ASTM and EN standards and tested in approved laboratories.
Advantages
The perfect suit for humid areas
Moisture resistant board with a percentage of water absorption between 10 to 25%
Convenient backer for showers and bath areas

Surface Finishing
Multiple finishing options: Painted (Water or oil bas paint)
Wallpaper, vinyl,woodâ?¦
Joint fillingWith Gcoatâ?¢All Purpose Joint Compound

Edge Types
Squared edge
Tapered Edge

Standards
ASTM C 1396
ASTM C473
ASTM C518
EN 520

Dimensions
Width: 1200mm, 1220mm
Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm
Thickness: 8mm, 9.5mm, 12.5mm, 15mm, 15.9mm, 18mm

Gboard MR H2 is a moisture resistant board having a reasonable percentage, between 5 to 10 %, of water absorption. The silicon oil in its core acts as a water repellent rendering it more resistant to moisture. Gboard�® MR H2 is the perfect suit for areas of high humidity. Gboard�® MR H2 is composed of the best quality gypsum, non-toxic minerals, and moisture repellent additives which suit health conditions. All materials are certified based on ASTM and EN standards and tested in approved laboratories.
Advantages
The perfect suit for areas with high humidity.
Moisture resistant board with a percentage of water absorption between 5 to 10%.
Ideal for toilets, humid areas, reception areas, meeting rooms, cafeterias, showrooms, office buildings, malls, and shops.

Surface Finishing
Multiple finishing options: Painted (Water or oil bas paint).
Wallpaper, vinyl, woodâ?¦
Joint filling with Gcoatâ?¢ All Purpose Joint Compound.

Edge Types
Squared edge
Tapered Edge

Standards
ASTM C 1396
ASTM C473
ASTM C518
EN 520

Dimensions
Width: 1200mm, 1220mm
Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm
Thickness: 8mm, 9.5mm, 12.5mm, 15mm, 15.9mm, 18mm

Gboard RG is a regular plasterboard ideal for general drywall and ceiling applications. It is a flexible gypsum board as it can accommodate any indoor architectural design. It is composed of the best quality gypsum, extracted straight from our quarries, and processed using the best ecological practices. All materials are certified based on ASTM and EN standards and tested in approved laboratories.
Advantages
Composed of the best quality gypsum
Ideal for standard interior installation in commercial or residential buildings
A lightweight alternative

Surface Finishing
Multiple finishing options: Painted (Water or oil bas paint)
Wallpaper, vinyl,woodâ?¦
Joint fillingWith Gcoatâ?¢All Purpose Joint Compound

Edge Types
Squared edge
Tapered Edge

Standards
ASTM C 1396
ASTM C 473
ASTM C 518

Dimensions
Width: 1200mm, 1220mm
Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm
Thickness: 8mm, 9.5mm, 12.5mm, 15mm, 15.9mm, 18mm

Gboard for gypsum board all types of Regular, fire resistant and moisture resistant

Gboard for gypsum board all types of Regular, fire resistant and moisture resistant

Please visit website for more information

Gypsum boards, commonly known as drywall is a premier building material designed to provide a monolithic surface when joints and fastener heads are

Cement Boards

Gypsum Boards

The cellular polycarbonate skylight for metal roofs is a natural lighting system based on lines shaped in half barrel cellular polycarbonate.

All it's elements are designed under the norms of the SSR type roof systems.

DESIGN
All the elements that made up our system are attached to the base moldings and do not penetrate nor damage the SSR deck system at the end design to derail the water and ensure a smooth transition to the cover.

They can be placed in di�erent widths from 0.45 meters to 1.37 meters and 6mm or 8mm of cellular polycarbonate.

ADVANTAGES
Hailstorm resistant
Better presentation
Less weight
Quick installation
Greater security
Translucent
Easy maintenance

Number:SLADE-RFS

Specifications:Thickness 0.2-1.4mm

Classification:Roofing sheet

Introduce:Material: galvanized, prepainted, aluminum etc Thickness: 0.2mm-1.4mm Width: 800mm-1000mm

Types and materials for roofing sheet:
CGCC, DX51D Zinc Coating white, red, blue PRE PAINTED Corrugated steel Roof Sheets / SheetPRE-PAINTED CORRUGATED ROOFING SHEET
Thickness: 0.11mm to 1.4mm
Width: Plain 400mm to 1000mm
Corrugated: 665mm to 1000 mm
Length: 1600 to 4500 mm
Zinc Coating: 80 to 275 GSM
Crest: 16.5mm
Pitch: 76.2mm
Waves per Sheet: 12
Color: White, red, blue or customized as per RAL color card
Main application:Roofing, metope adornment, various internal and external
pack material, suitable for the requirement of any building.
Specifications of Corrugated roofing sheet :
1) Material: carbon steel, galvanized steel, pre-painted steel, aluminum roofing sheet etc.
2) Thickness: 0.11 mm-1.4mm
3) Width: 400mm-1000mm
5) Length:2 to 9 meters or customized.

Featuring a strong, lightweight, and sturdy aluminum alloy frame. The wind and rain-resistant fabric is designed to withstand tension, block UV rays, and is guaranteed not to fade for 3 years. It includes a beautifully arched cover shell that fully protects the fabric when closed. It can extend up to 3.5 meters and is available in widths up to 6 meters. The roof should be retracted during strong winds or heavy rain to prevent damage to the fabric.